Engineering Commons^™

Enabling Premixed Hydrogen-Air Combustion For Aeroengines Via Laboratory Experiment Modeling, Christopher James Caulfield

Masters Theses

All combustion systems from large scale power plants to the engines of cars to gas turbines in aircraft are looking for new fuel sources. Recently, clean energy for aviation has come into the foreground as an important issue due to the environment impacts of current combustion methods and fuels used. The aircraft industry is looking towards hydrogen as a new, powerful, and clean fuel of the future. However there are several engineering and scientific challenges to overcome before hydrogen can be deployed into the industry. These issues
range from storing the hydrogen in a viable cryogenic form for an aircraft …

Multidimensional Transport-Coupled Numerical Investigation Of Non-Premixed Low-Temperature Flame In Atmospheric And High-Pressure Systems, Sudipta Saha

Theses and Dissertations

Gas-phase chemical reactions coupled with multidimensional fluid flow and heat and mass transport are found in various applications, i.e., from conventional engine applications to novel combustion techniques. With the goal of understanding such complex coupling in reacting flow systems, this dissertation work focuses on developing multi-physics simulation frameworks to investigate the effect of multidimensional transport on flame dynamics. This study primarily focuses on the modeling and simulation of low temperature flame formation in i) a canonical experimental setting with counterflow burners and ii) a supercritical water medium (i.e., hydrothermal flame).

In the first part of the dissertation, simulations of the …

A Computational Fluid Dynamic Analysis Of Oxyacetylene Combustion Flow For Use In Material Response Boundary Conditions, Craig Meade

Theses and Dissertations--Mechanical Engineering

Oxyacetylene torches are used in the aerospace industry and research to test thermal protection system materials (TPS) due to their high flame temperatures and high heat flux capabilities. The purpose of this work is to determine a combustion model to accurately simulate the high temperature flow of an oxyacetylene torch. The flow conditions around a sample material can then be used as boundary conditions when modeling TPS material response. Two separate combustion models with equilibrium chemistry were investigated using ANSYS Fluent™; the Eddy-Dissipation Model, and the Partially Premixed model.The results of this study are compared to existing experiments for validation.

Direct Numerical Simulation Of Supercritical Co2 Mixing And Combustion, Syed Mohammad Ovais

All Dissertations

The supercritical CO₂ power cycle (sCO₂ ) is a relatively new technology, which promises to reduce CO₂ emissions with potentially higher efficiencies. However due to challenging conditions posed by supercritical pressures, the mixing and ignition phenomena in sCO₂ combustion is relatively less understood and studied. The primary objective of the current study is to investigate these fundamental processes using homogeneous ignition calculations (HMI) and direct numerical simulations (DNS). Broadly, the study is divided into two major parts. In the first part supercritical mixing in sCO₂ relevant conditions is investigated. To achieve this, DNS of temporally …

Characterization Of A Flex-Fuel Oxy-Combustion System Through Experimental Investigation And Computational Modeling, Md Mohieminul I. Khan

Open Access Theses & Dissertations

Oxy-fuel combustion has the potential to offer high thermal efficiency and lower pollutants emission compared to other existing combustion technologies. More than 63% of the worldâ??s electricity is produced by fossil fuel combustion which also is the major reason for greenhouse gas emissions. Oxy combustion offers a solution to it. Oxy combustion uses pure oxygen as an oxidizer instead of air which eliminates the NOx and SOx products from the exhaust. In oxy-combustion flue gas mainly consists of CO2 and water vapor. Furthermore, combustion in presence of pure oxygen results in higher flame temperature and hence promises higher thermal efficiency. …

An Experimental Study Of Fuel Selection For A Gasoline Multi-Mode, Spark Ignited – Compression Ignition Engine, Zachary J. Stanchina

Dissertations, Master's Theses and Master's Reports

In this study of fuels of different reactivities and their performance in a low-temperature combustion (LTC) engine. The engine was a 2.2L CRDI engine code D4HB provided by industry partner Hyundai America Technical Center inc. (HATCI). The engine was instrumented with in-cylinder pressure sensors allowing for monitoring of the combustion process.

First, the engine was operated with standard US pump grade gasoline, Research Octane number (RON) 91 E10, to find initial operation conditions as well as control points of stable operation for daily checks on system conditions.

Tested were 8 different fuel blends, the four base blends were provided by …

Cfd And Heat Transfer Analysis Of Rocket Cooling Techniques On An Aerospike Nozzle, Geoffrey Sullivan

Electronic Theses and Dissertations

In recent years the development of rocket engines has been mainly focused on improving the engine cycle and creating new fuels. Rocket nozzle design has not been changed since the late 1960s. Recent needs for reliable and reusable rockets, as well as advancements in additive manufacturing, have brought new interest into the aerospike nozzle concept. This nozzle is a type of altitude adjusting nozzle that is up to 90% more efficient than bell nozzles at low altitudes and spends up to 30% less fuel. Since the nozzle body is submerged in the hot exhaust gasses it is difficult to keep …

Investigations Of The Low Temperature Combustion Regions And Emissions Characteristics Of Aerospace F24 In A Constant Volume Combustion Chamber And A Common Rail Direct Injection Ci Engine, Richard C. Smith Iii

Electronic Theses and Dissertations

A study was conducted to investigate the low temperature combustion (LTC) regions of aerospace F24 and ULSD in the static setting of a CVCC and the dynamic setting of a CRDI research engine. This research is conducted to reduce in-cylinder emissions by understanding and implementing a technique to achieve an extended LTC. Emissions data for this study were collected during the operation of the CRDI research engine with a MKS 2030 FTIR and an AVL Microsoot 483. The parameters researched within the static setting of the CVCC included the determinations of the cool flames and NTC regions within the LTHR …

A Study Of Greenhouse Gas Emissions And Performance Of An Internal Combustion Engine Operating On Landfill Gas Blends As Fuel, Lauren T. Creadore

Dissertations and Theses

Landfill gas (LFG) is an abundant resource naturally occurring from the decomposition of municipal solid waste. It can be generated in U.S. landfills at a rate of 24.2 to 59.1 GNm³ per year.¹ LFG presents both a problem and solution with respect to global warming. Composed of carbon dioxide (CO₂, 30-40%) and methane (CH₄, 45-55%), as well as nitrogen (N₂, 10-15%), oxygen (O₂, 0-5%), and other trace gasses¹, LFG that is permitted release into the atmosphere will contribute to the greenhouse gas effect due to the presence of …

Experimental Setup Of A Rapid Compression Machine For Spark Ignition Studies, Daniel Llaguno

Electronic Theses and Dissertations

The main objective of this thesis is to document the design and development of a rapid compression machine (RCM). A series of tests were performed to verify the operation of the system using the compression of air. Finally, an experiment was conducted to validate the auto-ignition temperature of DME under HCCI mode. Based on the first version of the RCM, improvements were made to speed up the compression process, and to create the conditions required for the auto-ignition of a DME-air mixture. The inlet diameter of the pneumatic actuation cylinder was increased to reduce the choking effect of the air …

Analysis Of Combustion In Plasma Electrolytic Oxidation (Peo) Coatings Of The Piston Surface In Spark Ignition Engines, Brendon Bain

Electronic Theses and Dissertations

With the global effort to “green” the transportation industry, the internal combustion engine (ICE) is required to reduce its carbon footprint and can do so by increasing efficiency. Plasma Electrolytic Oxidation (PEO) coatings confer properties of high wear and corrosion resistance, high hardness, excellent adhesion and a superior thermal barrier to their substrate, suggesting that coating of ICE components has the potential to greatly improve the combustion efficiency. The primary objective of this thesis is to analyze the effects of PEO coating on the surface of pistons in a spark ignition ICE, with the goal of increasing efficiency, to address …

Influences Of The Internal Residual On Combustion Instabilities In The Misfire And Partial Burn Regimes Of A Dilute Spark-Ignition Engine, Rachel Inez Stiffler

Doctoral Dissertations

"Dilution in spark-ignition (SI) engines can improve fuel consumption and reduce emissions; however, increased levels of dilution either from excess oxidizer or exhaust gas recirculation (EGR) causes combustion to become more strained and cycle-to-cycle variations increase. At high levels of dilution incomplete combustion events (i.e. misfires and partial burns) start to occur, which cause combustion instabilities and eventually a dilute limit is reached. It is known the combustion instabilities seen are primarily due to the feed-forward mechanism present in the residual gases, but it is still unknown what about the residual is influencing the dynamics under high levels of dilution …

Mean Pressure Gradient Effects On Flame-Flow Dynamics In A Cavity Combustor, David M. Smerina

Honors Undergraduate Theses

Pressure gradient confinement effects are experimentally investigated within a cavity combustor to analyze the flame interactions of premixed, cavity stabilized, flames in a high-speed combustor. Pressure gradient confinement effects are generated in a dual mode ramjet-scramjet (DMSR) by varying the wall geometry to form converging, diverging, and nominal configurations. The velocity field and flame position are captured temporally using simultaneous high-speed particle image velocimetry (PIV) and CH chemiluminescence. The evolution of the flow field and flame structure are analyzed, and the high temporal resolution of these measurements allows for the characterization of turbulence-flame interactions. Consideration of the combustion mode and …

Investigation Of Various Jet Configurations On Jet-In Crossflow Flame Characteristics At Elevated Pressures, Max K. Fortin

Honors Undergraduate Theses

The goal of this study is to investigate how varying the configuration of an axially staged combustion test facility affects the resultant flame and its relevant characteristics. Such relevant characteristics are the jet liftoff and the centerline jet trajectory. The configurations that are primarily being investigated are varied jet configuration diameters, 4mm and 12.7mm, preheated and non-preheated fuel, and different fuels. The testing facility is located at the University of Central Florida in the PERL (Propulsion and Energy Research Lab) facility. The facility allows for modeling an industrial turbine combustor, specifically an axial staged combustor with a Jet-In-Crossflow …

Portable Calorimeter For Fire Experiments, Kayla Collins, Kara Hewson, Christopher Chen, Joel Keddie

Mechanical Engineering

Executive Summary

An oxygen consumption calorimeter works by measuring the heat release rate of a burning substance. This value is calculated by measuring the oxygen and byproducts in smoke from afire.In order to get these values two types of sensors were used. A non-dispersive infrared sensor (NDIR) that measured CO and CO2 and a zirconium O2 sensor were used to find their respective gas concentrations.The design to calculate the heat release rate is focused on maximizing sensor accuracy and portability while simplifying the manufacturing by using off-the-shelf components. The goal included making the system simple to recreate and package in …

Design And Analysis Of A Compact Combustor For Integration With A Jetcat P90 Rxi, Daniel Holobeny

Theses and Dissertations

Ultra Compact Combustors are a novel approach to modern gas turbine combustor designs that look to reduce the overall combustor length and weight. A previous study integrated an Ultra Compact Combustor into a JetCat P90 RXi turbine engine and achieved self-sustained operation with a length savings of 33% relative to the stock combustor. However, that combustor could not operate across the full stock engine performance range due to flameout at increased mass ow rates as reactions were pushed out of the primary zone. To ensure reactions stayed in the primary zone, a new design with a larger combustor volume was …

Detonation Confinement In A Radial Rotating Detonation Engine, Kavi Muraleetharan

Theses and Dissertations

Radial Rotating Detonation Engines (RRDE) have provided an opportunity for use of a pressure-gain combustor in a more compact form compared to an axial RDE. A successfully tested RRDE has operated over a wide range of test conditions and produced detonation modes with one, two, and three waves. The presence of multiple waves located the detonation waves to the outer radius, while one wave modes operated closer to the inner radius. Locating the detonation wave closer to the inner diameter resulted in less time for combustion prior to the radial turbine. Subsequently, this tended to decrease efficiency. To attempt to …

Mechanically Activated Combustion Synthesis Of Niobium Silicide Based Composites, Reina Trevino

Open Access Theses & Dissertations

Niobium silicide-based composites are promising materials for high-temperature structural applications, such as gas turbines, but their implementation is hindered by the lack of effective processing methods. Self-propagating high-temperature synThesis (SHS) is an attractive method for fabrication of advanced materials. However, it is difficult to perform SHS of niobium silicides because the melting point of Nb is higher than the combustion temperature, which greatly inhibits Nb-Si reaction. To ignite an Nb/Si mixture and obtain Nb5Si3, the desired phase in niobium silicides, either preheating or mechanical activation of the mixture is necessary. This problem becomes even more critical in the SHS of …

Burner Design For A Pressurized Oxy-Coal Reactor, William Cody Carpenter

Theses and Dissertations

The need for electric power across the globe is ever increasing, as is the need to produce electricity in a sustainable method that does not emit CO2 into the atmosphere. A proposed technology for efficiently capturing CO2 while producing electricity is pressurized oxy-combustion (POC). The objective of this work is to design, build, and demonstrate a burner for a 20 atmosphere oxy-coal combustor. Additionally, working engineering drawings for the main pressure vessel and floor plan drawings for the main pressure vessel, exhaust, and fuel feed systems were produced. The POC reactor enables the development of three key POC technologies: a …

Design, Fabrication And Testing Of A Pressurized Oxy-Coal Reactor Exhaust System, Aaron Bradley Skousen

Theses and Dissertations

One of the challenges facing engineers is to provide clean, sustainable, affordable and reliable electricity. One of the major pollutants associated with coal combustion is CO2. A proposed technology for efficiently capturing CO2 while producing electricity is pressurized oxy-combustion (POC). The first objective of this work is to design, build and demonstrate an exhaust system for a 20 atmosphere oxy-coal combustor. The second objective of this work is to design and build mounts for a two-color laser extinction method in the POC. The POC reactor enables the development of three key technologies: a coal dry-feed system, a high pressure burner, …

Flow Behavior In Radial Rotating Detonation Engines, Scott A. Boller

Theses and Dissertations

Recent progress has been made in demonstrating Radial Rotating Detonation Engine (RRDE) technology for use in a compact Auxiliary Power Unit with a rapid response time. Investigation of RRDEs also suggests an increase in stable operating range, which is hypothesized to be due to the additional degree of freedom in the radial direction which the detonation wave can propagate. This investigation seeks to determine if the detonation wave is in fact changing its radial location. High speed photography was used to capture chemiluminescence of the detonation wave within the channel to examine its radial location, which was found to vary …

Examination Of Flow Dynamics And Passive Cooling In An Ultra Compact Combustor, Tylor C. Rathsack

Theses and Dissertations

The Ultra Compact Combustor (UCC) promises to greatly reduce the size of a gas turbine engine’s combustor by altering the manner in which fuel is burnt. Differing from the common axial flow combustor, the UCC utilizes a rotating flow, coaxial to the engine’s primary axis, in an outboard circumferential cavity as the primary combustion zone. The present study investigates two key UCC facets required to further this combustor design. The first area of investigation is cooling of the Hybrid Guide Vane (HGV). This UCC specific hardware acts as a combustor center body that alters the exit flow angle and acts …

Adding Semi-Structured Automated Grid Generation And The Menter-Shear Stress Turbulence Transport Model For Internal Combustion Engine Simulations To Novel Fem Lanl Combustion Codes, Brad Montgomery Philipbar

Mechanical Engineering ETDs

The addition of GridPro semi-structured, automated generation of grids for complex moving boundaries for combustion engine applications and the Menter Shear Stress Turbulent Transfer (SST) model are being developed by Los Alamos National Laboratory. The software is called Fast, Easy, Accurate, and Robust Continuum Engineering (FEARCE). In addition to improving the time and effort required to build complex grid geometry for turbulent reactive multi-phase flow in internal combustion engines, the SST turbulence model has been programmed into the Predictor Corrector Fractional-Step (PCS) Finite Element Method (FEM) for reactive flow and turbulent incompressible flow regime validation is performed. The Reynolds-Averaged Navier-Stokes …

Ignition And Extinction Behavior Of Fuels In A Microcombustor, Pawan Sharma

LSU Doctoral Dissertations

Conventional fuel testing device-CFR engine requires large quantities of fuels, which makes it unsuitable for research of small samples of fuels. This current study seeks to address this limitation by using an externally heated microcombustor as an alternative fuel testing device. Mainly three combustion behaviors have been observed inside a microcombustor: strong flames at higher flow rates, Flames with Repetitive Extinction and Ignition (FREI) at intermediate flow rates, and weak flames at marginal flow rates. In previous studies, weak combustion behavior has been proven suitable to study fuel properties from small samples of fuels. Microcombustor experiments typically rely on flame …

High Injection Pressure Dme Ignition And Combustion Processes: Experiment And Simulation, Xiucheng Zhu

Dissertations, Master's Theses and Master's Reports

With nearly smokeless combustion, Dimethyl Ether (DME) can be pressurized and used as a liquid fuel for compression-ignition (CI) combustion. However, due to its lower heating value and liquid density compared with diesel fuel, DME has a smaller energy content per unit volume. To obtain an equivalent energy content of diesel, approximately 1.86 times more quantity of DME is required. This can be addressed by a larger nozzle size or higher injection pressure. However, the effect of high injection pressure on DME spray combustion characteristics have not yet been well understood. In order to fill this gap, spray and combustion …

Combustion Dynamics And Heat Transfer In An Ultra Compact Combustor, Brian T. Bohan

Theses and Dissertations

The Ultra Compact Combustor (UCC) is an innovative combustion system alternative to a traditional turbine engine burner with the potential to improve engine efficiency with a reduced combustor volume. The UCC shortens the axial length of the combustor, and therefore reduces engine weight, by burning in an annulus and swirling the reactants in the circumferential direction. These length and weight improvements can directly lead to an increased thrust-to-weight rating of the engine. The present research included five objectives which advanced the UCC concept on four fronts; cooling UCC turbine vanes, advanced computational modeling of UCC systems, system air split control …

Kinetic Study Of Free Radical-Radical Reactions Of Combustion Importance At Elevated Pressures, Chao Yan

Dissertations

Combustion mechanisms consist of hundreds elementary reactions of free radicals and stable molecules. Radical-radical elementary reactions play important roles due to the high concentration in which free radicals are accumulated in combustion systems. Radical-radical reactions are typically multi-channel. Some of the channels might be of chain propagation or even chain branching nature, while other channels might be of chain termination nature. The relative importance of different channels is pressure dependent. Compared to radical-molecule reactions, radical-radical reactions are much less studied. This is due to the difficulties of well characterized quantitative production of radical species as well as due to the …

Simulation Of An Ethylene Flame With Turbulence, Soot And Radiation Modeling, Santu Golder

Electronic Theses and Dissertations

This thesis will investigate soot models that are available in commercial codes. We will look at the effect of turbulence models, gravity, soot models and radiation. Simulations will be compared to Coppalle and Joyeux [1]. The flame is an ethylene air diffusion flame at a Reynolds number of 5700. Simulations show the SST turbulence model, one-step soot model and Rosseland radiation model including gravity agree well with experimental data (temperature and soot). Flamelet soot modeling from Carbonell et al. [2] and flamelet radiation modeling from Doom [3] has been incorporated and compared as well.

Design And Experimental Study Of A High Pressure And Supercritical Methane-Oxygen Burner, A S M Arifur Rahim Chowdhury

Open Access Theses & Dissertations

Directly heated supercritical oxy-fuel power cycles have potential to offer a higher thermal efficiency and lower pollutant emissions compared to existing power cycles. Recent thermodynamic analysis of the cycle performed by several groups including the UTEP-Air Liquide research team show that combustion in the vicinity of 300 bar pressure and 1000-1400 K temperature allows for relatively high system efficiencies while operating within the limit of practical combustor materials. However, the realization of directly heated supercritical power cycle requires combustion systems be designed to operate in supercritical conditions and at temperature far below the blowout limit of conventional flames (above 1500 …

NoX Formation In Light-Hydrocarbon, Premixed Flames, Robert T. Hughes

Theses and Dissertations--Mechanical Engineering

This study explores the reactions and related species of NO_x pollutants in methane flames in order to understand their production and consumption during the combustion process. To do this, several analytical simulations were run to explore the behavior of nitrogen species in the pre-flame, post- flame, and reaction layer regions. The results were then analyzed in order to identify all "steady-state" species in the flame as well as the determine all the unnecessary reactions and species that are not required to meet a defined accuracy. The reductions were then applied and proven to be viable.