Engineering Commons^™

Solution-Processed Flexible Broadband Zno Photodetector Modified By Ag Nanoparticles, N. P. Klochko, K. S. Klepikova, I. V. Khrypunova, V. R. Kopach, I. I. Tyukhov, S. I. Petrushenko, S. V. Dukarov, V. M. Sukhov, M. V. Kirichenko, A. L. Khrypunova

Faculty Research, Scholarly, and Creative Activity

In this work, we present flexible broadband photodetectors (PDs) fabricated by a deposition of nanostructured zinc oxide (ZnO) films on polyimide (PI) substrates by using cheap and scalable aqueous method Successive Ionic Layer Adsorption and Reaction (SILAR). In order to increase the long-wavelength absorption of the nanostructured ZnO layer, we created its intrinsic defects, including oxygen vacancies by post-treatment at 300 °C in vacuum and thus the light-sensitive material ZnO/PI was obtained. Then we applied silver nanoparticles (Ag NPs) from a silver sol onto a nanostructured ZnO film, which were visualized using SEM in the form of spheres up to …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Viking Ax Cast by Students

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Dr. Cesmeci Awarded $1.1 mil DOE Grant
• Dr. Cesmeci Seeking to Student Researchers for DOE Grant

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Undergrad Researcher to Present at National Conference

Liquid-Vapor Distributions In Evacuated Small Diameter Channels For Improved Accuracy Of Initial Conditions In Modeling Of Oscillating Heat Pipes, Travis Mayberry

Mechanical Engineering Research Theses and Dissertations

Oscillating heat pipes, also known as pulsating heat pipes, are increasingly becoming a preferred high-performance thermal ground plane in a variety of heat spreading applications due to a number of advantages over traditional copper-water wicked heat pipes, including their lighter weight, thinner profiles, simpler fabrication, and greater variety of material and working fluid options. A major barrier to even wider adoption, however, is the lack of comprehensive analytical models to simulate their performance. A key input to first principles models simulating the fundamental physics of the devices is the initial condition of liquid and vapor segment lengths and their distribution …

Geometrically Complex Planar Heat Exchangers, Derli Dias Do Amaral Junior, Jose Lage

Mechanical Engineering Research Theses and Dissertations

In this study, geometrically complex planar heat exchangers, designed in line with the Constructal Law and operating at steady-state, are investigated numerically. The work is divided into two parts, one focusing on diffusion heat transfer in a rectangular plane and another on conjugate diffusion-convection heat transfer in a circular plane heat exchanger.

In the first part, a heat generating rectangular solid volume made of a low conductivity material is cooled through a small, isothermal side-section of the domain. The diffusion cooling process is improved by distributing within the heat generating material a fixed amount of a high conductivity material. The …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Department Hosts Summer Camp for HS Students

Anisotropic Plasticity Modeling Of Thin Sheets And Its Application To Micro Channel Forming Of Steel Foils, Jie Sheng

Mechanical Engineering Research Theses and Dissertations

Thin sheet metals and ultrathin metal foils produced by industrial rolling processes are textured polycrystalline materials and their mechanical behaviors may depend strongly on the orientation of applied loading. Consideration of such plastic anisotropy in advanced modeling of these materials is of the paramount importance in designing optimal manufacturing processes for automotive and other applications using finite element methods. This research addresses several critical issues in anisotropic plasticity modeling and its applications in analyzing micro channel forming of ultrathin stainless-steel foils. An experimental study has first been carried out on the accuracy and sensitivity of measuring the plastic strain ratios …

High Temperature Degradation In Gan-Based Hall Effect Sensors, Alexis Anne Krone

Graduate Theses and Dissertations

This research focuses on understanding the effects of accelerated aging through temperature and environment on novel gallium nitride-based Hall effect magnetic field sensors and determining device reliability under electric vehicle operating conditions. The device reliability was modeled using accelerated aging for the temperatures of 200 °C, 350 °C, 450 °C, and 600 °C under various time steps unique to each temperature and either air, which is identical to operating circumstances, or argon, which would model the hermetic packaging environment. Using a high temperature furnace and oven, devices underwent high temperature storage tests at a chosen temperature and time step. Afterwards, …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Two Student Researchers Receive Engineering Awards

Adjustable Height Pedestal Grinder Stand, Josef Zagorski, Zachary Wedel, Michael Sitar, Daniel Zevenbergen

Mechanical Engineering

Pedestal grinders are one of the most common machines found in machine shops today. The current industry standard for mounting a grinder is on a fixed single pillar, cast iron pedestal. A fixed pedestal allows for no vertical adjustment for shop users of different sizes and is a safety hazard. This report further defines this problem and proposes an iterative design process to meet the needs and wants of the customer. The adjustable-height pedestal grinder stand Senior Project team used this problem and design process to successfully complete the project within the allotted time. The first major deliverable and milestone …

Adaptive Robotic Chassis (Arc): Robocrop A Smart Agricultural Robot Toolset, Steven Bucher, Krissy Ikeda, Brooke Broszus, Alejandro Gutierrez, Ariana Low

Interdisciplinary Design Senior Theses

RoboCrop is a payload system that attaches to an existing modular drivetrain to support the agriculture industry with their primary challenge of labor shortages. ARC: RoboCrop features three degrees of freedom as an XYZ Cartesian robot and is intended specifically for pruning strawberry flowers. The image bay camera attached to RoboCrop’s frame identifies the strawberry flowers, communicates their XYZ coordinates, and then the Cartesian robot moves to the desired locations. The snipping toolhead is interfaced at the bottom of the Z-stroke and performs the snipping process. RoboCrop has a proven success rate of at least 70% of flowers pruned in …

Magnetic Gradient-Based Magnetic Tweezer System For 3d And Swarm Control Of Microswimmer, Xiao Zhang

Mechanical Engineering Research Theses and Dissertations

Microscale manipulation has very promising potential in medical applications such as drug delivery, minimal and invasion surgery. Contactless control is preferable as remote manipulation is necessary for in vivo applications. Among different control methods, magnetic power source is more suitable and robust for the applications mentioned above. Presented here is a magnetic tweezer system, which manipulates microscale magnetic particles using magnetic forces created by magnetic field gradient. The proposed system has three advantages: First, force applied by the magnetic tweezer system does not contact with the target object and can be generated in different directions. Second, the magnetic tweezer system …

Rehology And Electrical Conductivity Of Particulate Composites In Additive Manufacturing, Bin Xia

Mechanical Engineering Research Theses and Dissertations

Extrusion-based multi-functional additive manufacturing (AM) has been a rapidly developing area in AM recently. Particulate composites are widely used in this area to provide different functionalities with different types of particulate additives. However, there is no systematic understanding of the behavior of particulate composites during extrusion (especially in small nozzles) or of their properties once deposited in the build. This work investigates the properties of the type of particulate composites usually used in additive manufacturing, composed of a polymer matrix material and particulate additives within the micrometer scale. The focus is on the material rheology in the nozzle/capillary (for the …

Actuation And Control Methods For Individual And Swarm Multiscale Mechanical Systems, Pouria Razzaghi

Mechanical Engineering Research Theses and Dissertations

Robotic mechanisms can be driven by different internally and externally applied inertial and magnetic actuations. These actuations are utilized to regulate the dynamics of robots and move them in different locomotion modes. The first part of this dissertation is about using an external magnetic actuation to move a simple-in-design, small-scale robot for biomedical applications. The robots can be steered in different locomotion modes such as pivot walking and tumbling. The control design of this system consists of a swarm algorithm under a global control input, and a vision-based closed-loop controller to navigate in 2D environments.

Secondly, I propose a new …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Graduate Student Wins Excellence in Graduate Research Award

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Faculty and Students Mentor High School Design Competition

Mobile Nanogrid, Daniel Mendoza, Ben Mahony, Charles Ju, Michael Batshon

Interdisciplinary Design Senior Theses

The mobile nanogrid is a standalone mobile power solution which uses a combination of automatic and manual tracking mechanisms to maintain a solar panel's perpendicularity to the sun over the course of the day in order to maximize energy generation. The power can then be consumed by a user or stored. It is designed to be placed on the roof of a vehicle for the recreational camping market to meet the need for mobile power generation. A scaled-down functional prototype was designed in SolidWorks, modeled in MATLAB Simulink, fabricated in the machine shop using a combination of off-the-shelf and custom …

Marine Robot Deployment And Control System, Nicky Castillo, Nick Ellis, Trent Kelsall, Matt Kiyama

Interdisciplinary Design Senior Theses

A full operations package for underwater research, including the mid-sized ROV Nautilus with a distributed control system, a topside graphical user interface (GUI), and a dedicated launch and recovery system (LARS), was developed to increase the operational efficiency of scientific exploration and experimentation missions through Santa Clara University’s (SCU’s) Robotics Systems Laboratory (RSL). Design of the mechanical subsystems on Nautilus added flexibility of usage and protection of components. The new GUI improved pilot control of Nautilus with an added heads-up display and easy access to sensor readouts. The simulated Nautilus altitude control system has an error of ±1% and a …

Project Shearwater Ground Effect Uav, Duncan Clark, Justin Cole, Zachary Karat, Aidan Nickels, Cole Wolfe

Interdisciplinary Design Senior Theses

The Shearwater unmanned aerial vehicle is a maritime fixed-wing drone that is designed to use ground effect force generated between the aircraft and a body of water to efficiently propel itself near the surface of a body of water. Shearwater features a virtual reality pilot interface and will act as a hybrid underwater vehicle that will eventually be able to operate both above and beneath the ocean’s surface. The Shearwater team developed existing design work to produce major subsystems that culminated in a flyable functioning prototype. An existing airframe was updated with working control surfaces tested in simulation and in …

The Modular Oceanic Autonomous Underwater Vehicle For Novel Actuation, Bryan Gilbertson, John Elstad, Matthew Holmes, Sean Even, Robert Percell, Andrew Kambe, Gregor Limstrom

Interdisciplinary Design Senior Theses

A low-drag, high endurance, and high efficiency Long Range Autonomous Underwater Vehicle is a desired asset to Santa Clara University to aid future underwater vehicle development efforts. Such an vehicle will demonstrate novel actuation methods and provide the on-campus Robotics Systems Laboratory with a modular prototype to aid research and academic efforts. In this paper, we document the construction of a low cost, modular, demonstration vehicle that satisfies the requirements for high-efficiency operation and modular interfaces. The completed vehicle features standard actuation abilities utilizing low-drag methods that qualify it for shallow water operation. Furthermore, the vehicle demonstrates the feasibility of …

Damage Evolution And High-Rate Response Of High-Strength Concrete Under Triaxial Loading, Brett Williams

Mechanical Engineering Research Theses and Dissertations

The research presented in this study focuses on understanding fundamental mechanisms that drive material response under dynamic loading conditions. The objectives of the research were to: (1) to understand damage initiation and propagation in the bulk geomaterial under a variety of loading conditions and (2) to systematically investigate the strain rate effects on the triaxial compressive response of cementitious materials through the development of an innovative, first of its kind large-diameter (50 mm) triaxial Kolsky bar system.

The triaxial compressive response of high-strength concrete is needed to understand pressure-dependent material behavior, which is important for modeling extreme loading events. However, …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Graduate Student to Present at Posters on the Hill

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• 2021 Engineering Design Challenge

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Graduate Student Lands Position as Race Engineer

Development Of A Combined Thermal Management And Power Generation System Using A Multi-Mode Rankine Cycle, Nathaniel M. Payne

Browse all Theses and Dissertations

Two sub-systems that present a significant challenge in the development of high performance air vehicle exceeding speeds of Mach 5 are the power generation and thermal management sub-systems. The air friction experienced at high speeds, particularly around the engine, generates large thermal loads that need to be managed. In addition, traditional jet engines do not operate at speeds greater than Mach 3, therefore eliminating the possibility of a rotating power generator. A multi-mode water-based Rankine cycle is an innovative method to address both of these constraints of generating power and providing cooling. Implementing a Rankine cycle-based system allows for the …

Pulse Decay Thermal Conductivity Device, Matthew Schrenk

All Undergraduate Projects

Currently, there are several ways in which thermal conductivity can be calculated or assessed on a given material. However, with each method of testing comes potential limitations such as size, material state, complexity, and time. The goal of this study was to develop a pulse heated thermistor that would reduce all four limitations, thus provide precise and timely results regardless of the material state and size. A thermistor is resistor which changes resistance in accordance to temperature. To achieve the design, heat transfer and electrical methods were applied. As with all resistors, heat is dissipated across the element and released …

Development Of A Robust And Tunable Aircraft Guidance Algorithm, Jacob R. Spangenberg

Browse all Theses and Dissertations

A set of guidance control laws is developed for application to a reduced order dynamic aircraft model. A feedback control formulation utilizing a linear quadratic regulator (LQR) is developed, together with methods for easing the design burden associated with gain tuning. Metrics are developed to assess the stability margin of the controller over the full flight envelope of a notional unmanned aerial vehicle (UAV) model. A feedforward control path is then added to the architecture. The performance of the guidance control laws is assessed through time domain step response metrics as well as through execution of a design mission. The …

Development Of A Robust And Tunable Aircraft Guidance Algorithm, Jacob R. Spangenberg

Browse all Theses and Dissertations

A set of guidance control laws is developed for application to a reduced order dynamic aircraft model. A feedback control formulation utilizing a linear quadratic regulator (LQR) is developed, together with methods for easing the design burden associated with gain tuning. Metrics are developed to assess the stability margin of the controller over the full flight envelope of a notional unmanned aerial vehicle (UAV) model. A feedforward control path is then added to the architecture. The performance of the guidance control laws is assessed through time domain step response metrics as well as through execution of a design mission. The …

Performance Of A Dual Plane Airfoil Model With Varying Gap, Stagger, And Decalage Using Pressure Measurements And Particle Image Velocimetry, Salome Kenneth Nunes

Browse all Theses and Dissertations

The dual-plane airfoil has been adopted in the design of aircraft wings, wind turbine blades, and propellers. The purpose of this research is to investigate the most important design parameters of a dual-plane airfoil model for the best aerodynamic performance, such as gap, stagger, and decalage. The dual-plane airfoil model was designed using the S826 profile. A mechanical mechanism with electrical actuator control is particularly designed to alter the gap and stagger smoothly, as well as the angle of attack (AOA) for each airfoil. It results in a gap range of 1.38c to 2.17c, a stagger range of -0.75c to …