Engineering Commons^™

Surface Wetting And Friction Studies Of Nano-Engineered Surfaces On Copper Substrate, Julius Sheldon Morehead

Graduate Theses and Dissertations

Nano-engineered-textures on a material surface can dramatically improve the wetting and non-wetting properties of a surface, and they also show promise to address friction issues that affect surfaces in contact. In this work, aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) was used to produce nano-textures on copper (Cu) substrates. A study was performed to examine the effects of changing the annealing conditions and a-Si thickness on nano-texture formation. The creation of various nano-topographies and chemically modifying them using octafluorocyclobutane (C4F8) was performed to control hydrophilicity, hydrophobicity, and oil affinity of nano-textured surfaces. A video-based contact angle measurement system was used …

Development Of A Structured Concrete Thermocline Thermal Energy Storage System, Bradley M. Brown

Graduate Theses and Dissertations

The past couple of decades have shown a concern when considering the way the world obtains its power. The focus has been switching from fossil fuels that have been used for hundreds of years to renewable energy sources, such as the sun. Solar energy is readily and infinitely available for harnessing. One problem with solar energy, though, is its inability to be used during the night time and during cloud covered weather. A solution to this problem is the use of energy storage mechanisms. For solar plants that use solar thermal energy (concentrating solar power plants), thermal energy storage (TES) …

Development Of Spray Cooling For High Heat Flux Electronics, Jeremy Scott Junghans

Graduate Theses and Dissertations

The thermal demands of modern day electronic systems require innovative thermal solutions. Spray cooling has proven to be able to cool heat fluxes orders of magnitude higher than traditional cooling methodologies. This work includes a comparison of spray cooling to standard thermal management methodologies. Key system parameters and considerations are discussed. The properties of available packaging materials and their effect on the reliability of a spray cooled system are presented. Parameters such as fluid temperature, droplet size, fluid velocity and flow rate all directly impact performance and are detailed in this work. Finally, results from of a wide range of …

An Investigation Into Temperature Trending In Railroad Tapered Roller Bearings Through Vibration Monitoring Techniques, Rafael Kristian Maldonado

Theses and Dissertations - UTB/UTPA

A series of laboratory experiments have been conducted at The University of Texas-Pan American to investigate the cause of bearing “temperature trending.” A combination of theoretical and experimental studies has identified potential sources for the abrupt changes in temperature often seen in railroad bearings. Previous studies suggest the possibility of vibration induced roller misalignment as the root cause for temperature trending. Subsequent research conducted by the UTPA team was designed to provide evidence through vibration monitoring techniques for the proposed hypothesis. To that end, a dynamic bearing tester was used to run four bearings at various speeds and loads experienced …

Energy-Based Analysis Of Utility Scale Hybrid Power Systems, Kwame Agyenim-Boateng

UNLV Theses, Dissertations, Professional Papers, and Capstones

The promise of large-scale use of renewables such as wind and solar for supplying electrical power is tempered by the sources' transient behavior and the impact this would have on the operation of the grid. Among the methods cited for addressing some of those concerns are exploring the complementary nature of solar and wind power generation, and through the use of supplemental energy storage. While the technology for the latter has not been proven to be economical on a large scale at the present time, some assessments of what magnitude is required can be made. An energy-based analysis of utility …

Fenestration Studies On Building Energy Using The Facade Evaluation Facility, Wendell Cocina

UNLV Theses, Dissertations, Professional Papers, and Capstones

The project was developed to assess several types of facades and their influence on building energy, mainly focused on windows and other building fenestrations. Requirements for the facility are stated in this paper alongside corresponding solutions. The facility is designed to represent a section of a building façade. Experimenting on a wide range of fenestrations including windows with integrated PV elements was the primary prerequisite. The option of removable façade configurations was used and allowed testing specimens to be changed effortlessly. Instrumentation and data acquisition are discussed including calibration and uncertainty analysis. Investigation of the air conditioning unit was concluded …

A Study Of A Novel Modular Variable Geometry Frame Arranged As A Robotic Surface, Christopher James Salisbury

UNLV Theses, Dissertations, Professional Papers, and Capstones

The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary constraints. Each module is connected by a passive six-bar mechanism that mimics the constraints of a spherical joint at each triangle intersection. A three dimensional inkjet printer is used to create a six-module prototype designed around surplus stepper motors powered by an old computer power supply as a proof-of-concept example.

The finite element method is applied to …

The Role Of Thermally-Induced Geometrical Changes In Temperature Trending Of Railroad Tapered Roller Bearings, Andrei G. Vaipan

Theses and Dissertations - UTB/UTPA

The understanding of the phenomenon of temperature trending of railroad tapered roller bearings is of paramount importance to the railroad industry. The problem that this poses to the industry is that it leads to false alarms triggered by wayside detectors, which forces the premature removal of defect-free bearings. This thesis provides more insight into this phenomenon and answers questions regarding the importance of key tapered roller bearing components geometry and geometrical changes during temperature trending events. In this study, dynamic experiments conducted in the laboratory have represented the primary method of testing bearing temperature trending. The experimental results are brought …

The Evaluation And Analysis Of The Impact Of Variability On The Twelve Workstation Factory, Hernando Garrido

Theses and Dissertations - UTB/UTPA

Presently, there is theory and work examples about factory performance presented in the book ―Optimizing factory Performance‖ by James Ignizio, Ph.D. The theory explains how to determine performance using three fundamental equations by considering the impact and propagation of variability through a 12-Workstation Factory Model, and a number of its variations. The objective of developing a simulation model was to serve as a tool for instructors to illustrate the impact and propagation of variability in the manufacturing industry and to investigate phenomena (i.e., time to reach steady state, impact of variability) in the three dimensions of manufacturing. The validation of …

Analysis And Design Of An Anisotropic, Compliant Suspension Component, Samantha Jean Salinas

Theses and Dissertations - UTB/UTPA

A steering pad on a train is meant to reduce the force on the wheel while moving along a curve in the rail. A new steering pad was desired with properties tuned for a new suspension system design. An anisotropic, compliant pad was designed for a specific stiffness anisotropy, 20:1. Finite element analysis was performed on various models as a guide to designing a pin with the desired stiffness ratio. A design was chosen for a prototype made of thermoset polyurethane, a similar material to that currently used. Experiments were performed on the prototype pad model to determine vertical and …

Development And Implementation Of Challenge-Based Instruction In Engineering Graphics, Gregory A. Potter

Theses and Dissertations - UTB/UTPA

This thesis discusses the challenge-based instructional (CBI) lessons currently being developed for the Engineering Graphics course at UTPA. This endeavor concentrates on student retention, as well as the students’ ability to practically apply their new skills. Minority science, technology, engineering, and math (STEM) students have been found, in recent studies, to depart from STEM undergraduate fields to some extent because of the lack of real world connections to the subject matter. Also, the traditional way of teaching theory first and then assigning a task may actually stifle creative thought and innovation required in later STEM courses. Our use of CBI …

Characterizing And Optimizing The Molten Salt Cleaning, Yangyang Long

Theses and Dissertations - UTB/UTPA

Molten salt cleaning is an important cleaning approach in remanufacturing which can remove a variety of contaminants from metal substrates with high efficiency. Facing the very limited research of this approach in literature, this thesis intends to characterize molten salt cleaning process and optimize its parameters when big parts with complicated shapes are cleaned. Based on the development of molten salt cleaning and studies on contaminations, two experiments are conducted. The first one investigates the influences of the hot salts on three metal substrates and shows the applicable of cleaning carbon steel and grey iron parts with molten salt. The …

The Design, Development, And Optimization Of Variable And Fixed Orifice Dampers With Empirical And Experimental Testing For Implementation In The Railroad Industry, Charles K. Speck

Theses and Dissertations - UTB/UTPA

The work of this thesis details the experimental testing, development, and optimization of the spools and system of the variable orifice damper system. The fixed orifice system was developed from concept, tested, and then redesigned. The experimental testing for the orifice selection directed the optimization and final design for the fixed orifice damper system. The testing focused on the evaluation of pressure drops and flow rate for static testing. The dynamic testing evaluated the displacement rate and force loading. Design, testing, and optimization worked to achieve designed flow rates and pressure drops provided by Amsted Rail based upon simulations. When …