Open Access. Powered by Scholars. Published by Universities.®
- Institution
Articles 1 - 9 of 9
Full-Text Articles in Engineering
Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel
Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel
A.S. Md Abdul Haseeb
Biodiesel is currently in regular use as an alternative fuel over conventional petroleum diesel. However, corrosion of automotive materials is one of the concerns related to biodiesel compatibility issues. In addition, auto-oxidation of biodiesel can also enhance the corrosiveness of biodiesel. The present study aims to investigate inhibition effect of ethylenediamine (EDA), n-butylamine (nBA), tert-butylamine (TBA) against corrosion of cast iron. Static immersion tests in biodiesel in the presence (100 ppm) and absence of different corrosion inhibitors were carried out at room temperature for 1200 hours. At the end of the test, corrosion characteristic was investigated by weight loss measurements …
Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel
Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel
A.S. Md Abdul Haseeb
Biodiesel is currently in regular use as an alternative fuel over conventional petroleum diesel. However, corrosion of automotive materials is one of the concerns related to biodiesel compatibility issues. In addition, auto-oxidation of biodiesel can also enhance the corrosiveness of biodiesel. The present study aims to investigate inhibition effect of ethylenediamine (EDA), n-butylamine (nBA), tert-butylamine (TBA) against corrosion of cast iron. Static immersion tests in biodiesel in the presence (100 ppm) and absence of different corrosion inhibitors were carried out at room temperature for 1200 hours. At the end of the test, corrosion characteristic was investigated by weight loss measurements …
Effect Of Temperature On The Corrosion Behavior Of Mild Steel Upon Exposure To Palm Biodiesel
Effect Of Temperature On The Corrosion Behavior Of Mild Steel Upon Exposure To Palm Biodiesel
A.S. Md Abdul Haseeb
Recently biodiesel, as an alternative fuel is getting more significance to replace diesel fuel completely or partially. However, corrosion of automotive materials in biodiesel is a major concern as this can reduce engine life. This study aims to investigate the corrosion behavior of mild steel at three different temperatures such as room temperature, 50 and 80 °C. Static immersion tests in B0 (diesel), B50 (50% biodiesel in diesel), B100 (biodiesel) were carried out for 1200 h. At the end of the tests, corrosion characteristic was investigated by weight loss measurements and changes of the exposed metal surface. Fuels were analyzed …
Degradation Of Physical Properties Of Different Elastomers Upon Exposure To Palm Biodiesel
Degradation Of Physical Properties Of Different Elastomers Upon Exposure To Palm Biodiesel
A.S. Md Abdul Haseeb
Biodiesel, as an alternative fuel, is gradually receiving more popularity for use in internal combustion engines. However questions continue to arise with regard to its compatibility with elastomeric materials. The present work aims to investigate the comparative degradation of physical properties for different elastomers [e.g. ethylene propylene diene monomer (EPDM), silicone rubber (SR), polychloroprene (CR), polytetrafluroethylene (PTFE) and nitrile rubber (NBR)] upon exposure to diesel and palm biodiesel. Static immersion tests in B0(diesel), B10 (10% biodiesel in diesel), B20, B50 and B100(biodiesel) were carried out at room temperature (25 °C) for 1000 h. Different physical properties like, changes in weight …
Structural And Mechanical Properties Of Nanostructured Tio2 Thin Films Deposited By Rf Sputtering
Structural And Mechanical Properties Of Nanostructured Tio2 Thin Films Deposited By Rf Sputtering
A.S. Md Abdul Haseeb
This study mainly aims to evaluate the effects of substrate temperatures on the mechanical properties of TiO2 thin films deposited on glass substrates by radio-frequency (RF) magnetron sputtering. All titania films possess anatase structure having a nodular morphology. AES results reveal that Si and Na ions from glass diffuse into TiO2 films at higher substrate temperatures. Micro-scratch and wear tests were conducted to evaluate their mechanical and tribological properties. The adhesion critical loads of TiO2 films deposited at room temperature, 200 and 300°C are found to be 1.51, 1.54 and 1.08N, respectively. Scratch hardness also increases from 11.5 to 13.6GPa …
Compatibility Of Elastomers In Palm Biodiesel
Compatibility Of Elastomers In Palm Biodiesel
A.S. Md Abdul Haseeb
In recent time, environmental awareness and concern over the rapid exhaustion of fossil fuels have led to an increased popularity of biodiesel as an alternative fuel for automobiles. However, there are concerns over enhanced degradation of automotive materials in biodiesel. The present study aims to investigate the impact of palm biodiesel on the degradation behavior of elastomers such as nitrile rubber (NBR), polychloroprene, and fluoro-viton A. Static immersion tests in B0 (diesel), B10 (10% biodiesel in diesel), B100 (biodiesel) were carried out at room temperature (25 °C) and at 50 °C for 500 h. At the end of immersion test, …
Influence Of Ni Nanoparticle On The Morphology And Growth Of Interfacial Intermetallic Compounds Between
A.S. Md Abdul Haseeb
TiO2 thin films were deposited on unheated and heated glass substrates at an elevated sputtering pressure of 3 Pa by radio frequency (RF) reactive magnetron sputtering. TiO2 films deposited at room temperature were annealed in air for 1 h at various temperatures ranging from 300 to 600 °C. The structural and optical properties of the thin films were investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and ultraviolet-visible-near infrared (UV-VIS-NIR) spectrophotometry. XRD results show that as-grown and post-annealed TiO2 films have anatase crystal structure. Higher substrate and annealing temperatures result in a slight increase of crystallinity. TiO2 …
Corrosion Characteristics Of Copper And Leaded Bronze In Palm Biodiesel
Corrosion Characteristics Of Copper And Leaded Bronze In Palm Biodiesel
A.S. Md Abdul Haseeb
Biodiesel has become more attractive as alternative fuel for automobiles because of its environmental benefits and the fact that it is made from renewable sources. However, corrosion of metals in biodiesel is one of the concerns related to biodiesel compatibility issues. This study aims to characterize the corrosion behavior of commercial pure copper and leaded bronze commonly encountered in the automotive fuel system in diesel engine. Static immersion tests in B0, B50 and B100 fuels were carried out at room temperature for 2640 h. Similar immersion tests in B0, B100 and B100 (oxidized) fuels were also conducted at 60 °C …
Effects Of Annealing Treatment On Optical Properties Of Anatase Tio 2 Thin Films
Effects Of Annealing Treatment On Optical Properties Of Anatase Tio 2 Thin Films
A.S. Md Abdul Haseeb
In this investigation, anatase TiO 2 thin films were grown by radio frequency magnetron sputtering on glass substrates at a high sputtering pressure and room temperature. The anatase films were then annealed at 300-600 °C in air for a period of 1 hour. To examine the structure and morphology of the films, X-ray diffraction (XRD) and atomic force microscopy (AFM) methods were used respectively. From X-ray diffraction patterns of the TiO 2 films, it was found that the as-deposited film showed some differences compared with the annealed films and the intensities of the peaks of the crystalline phase increased with …