Engineering Commons^™

Numerical Study Of Solar Receiver Tube With Modified Surface Roughness For Enhanced And Selective Absorptivity In Concentrated Solar Power Tower, Shawn Hatcher, Mathew Z. Farias, Jianzhi Li, Peiwen Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Concentrated solar power (CSP) is a reliable renewable energy source that is progressively lowering its cost of energy. However, the heat loss due to reflected and emitted radiation hinders the maximum achievable thermal efficiency for solar receiver tubes on the solar tower. Current solar selective coatings cannot withstand the high temperatures that come with state-of-the-art CSP towers often needing to be recoated soon after initial operation. We intend to use Inconel 718 with different additive manufacturing (AM) practices to construct surfaces that allow for more light-trapping to occur. By adjusting printing parameters, we can tailor a surface to allow for …

Image Segmentation With Human-In-The-Loop In Automated De-Caking Process For Powder Bed Additive Manufacturing, Vincent Opare Addo Asare-Manu

Theses and Dissertations

Additive manufacturing (AM) becomes a critical technology that increases the speed and flexibility of production and reduces the lead time for high-mix, low-volume manufacturing. One of the major bottlenecks in further increasing its productivity lies around its post-processing procedures. This work focuses on tackling a critical and inevitable step in powder-bed additive manufacturing processes, i.e., powder cleaning or de-caking. Pressing concerns can be raised with human involvement when performing this task manually. Therefore, a robot-driven automatic powder cleaning system could be an alternative to reducing time consumption and increasing safety for AM operators. However, since the color and surface texture …

Non-Destructive Infrared Thermographic Curing Analysis Of Polymer Composites, Md Ashiqur Rahman, Javier Becerril, Dipannita Ghosh, Nazmul Islam, Ali Ashraf

Mechanical Engineering Faculty Publications and Presentations

Infrared (IR) thermography is a non-contact method of measuring temperature that analyzes the infrared radiation emitted by an object. Properties of polymer composites are heavily influenced by the filler material, filler size, and filler dispersion, and thus thermographic analysis can be a useful tool to determine the curing and filler dispersion. In this study, we investigated the curing mechanisms of polymer composites at the microscale by capturing real-time temperature using an IR Thermal Camera. Silicone polymers with fillers of Graphene, Graphite powder, Graphite flake, and Molybdenum disulfide (MoS₂) were subsequently poured into a customized 3D printed mold for …

A Numerical Simulation Of The Powder Bed Additive Manufacturing Process With Molecular Dynamics Simulation, Yeasir Mohammad Akib

Theses and Dissertations

Many manufacturing industries utilize powder bed fusion (PBF) since it can produce microscale precision 3D parts. During PBF, powder particles are selectively fused layer by layer using thermal energy. The build quality in the PBF process relies heavily on powder bed properties and thermal energy deposition. Powder flowability, spreadability, and packing fraction are some of the insightful factors that determine the quality of the powder bed. In this study, a two-dimensional powder bed is developed using the LAMMPS package. A cloud-based pouring of powders with varying volumes and initialization is adopted for the work. A blade-type and circular recoater is …

Automated Posture Positioning For High Precision 3d Scanning Of A Freeform Design Using Bayesian Optimization, Zhaohui Geng, Bopaya Bidanda

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Three-dimensional scanning is widely used for the dimension measurements of physical objects with freeform designs. The output point cloud is flexible enough to provide a detailed geometric description for these objects. However, geometric accuracy and precision are still debatable for this scanning process. Uncertainties are ubiquitous in geometric measurement due to many physical factors. One potential factor is the object’s posture in the scanning region. The posture of target positioning on the scanning platform could influence the normal of the scanning points, which could further affect the measurement variances. This paper first investigates the geometric and spatial factors that could …

Ultrafast Laser Ablation Of Inconel 718 For Surface Improvement, Sampson Canacoo, Enrique Contreras Lopez, Oscar Coronel, Farid Ahmed, Jianzhi Li, Anil K. Srivastava

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Inconel 718 is considered difficult to machine because of its ability to maintain its properties at high temperatures. The low thermal conductivity of the alloy causes accelerated tool deterioration when machining. Selective laser melting (SLM) additive manufacturing introduces a possibility of eliminating these difficulties, and producing complex shapes with this difficult-to-machine material. However, high surface roughness and porosity usually occur at the surface of components produced through additive manufacturing. In this study, the surfaces of Inconel 718 samples produced through selective laser melting were treated using laser ablation. The process parameters for the laser ablation process were analyzed in …

Selective Laser Melting Of Titanium Diboride: A Study Of The Energy Density Effects, Lazaro Lopez Mendez

Theses and Dissertations

Natural titanium diboride (TiB2) has been reported the 5th hardest material on earth. Due to its superior properties, such as high density, high elastic modulus, and high compressive strength, TiB2 becomes one of the most suitable ceramic reinforcements for applications with severe friction and heavy loading conditions. This study is intended to produce TiB2 using 3D additive manufacture (AM) technology, and then to understand the tribological property of the AM fabricated TiB2 specimens. In this study, a laser additive alloying (LAA) process was developed based on a Renishaw AM laser system. One mm thick samples were prepared using the LAA …

Investigation Of Different Hatch Strategies On High Entropy Alloy Fabrication By Selective Laser Melting, Joni Chandra Dhar

Theses and Dissertations

This study investigated the synthesis of CuCrFeNiTiAl high entropy alloy (HEA) from pure elements using selective laser melting (SLM). The objectives are to validate the feasibility of the HEA fabrication from elemental powder materials, and to examine the effect of various hatch strategies and energy densities on the microstructures and other materials properties. 3D samples of CuCrFeNiTiAl alloy were fabricated under different energy densities and with different scan vector lengths. The as-built samples were characterized by X-ray diffraction (XRD), and the microstructures were observed using scanning electron microscopy (SEM). The XRD results showed that face centered cubic, and body centered …

A State-Of-The-Art Review Of Laser-Assisted Bioprinting And Its Future Research Trends, Chaoran Dou, Victoria Perez, Jie Qu, Andrew Tsin, Ben Xu, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Bioprinting is an additive manufacturing technology with great potential in medical applications. Among available bioprinting techniques, laser-assisted bioprinting (LAB) is a promising technique due to its high resolution, high cell viability, and the capability to deposit high-viscousity bioink. These characteristics allow the LAB technology to control cells precisely to reconstruct living organs. Recent developments of LAB technologies are reviewed in this paper, covering various designs of LAB printers, research progresses in energy-absorbing layer (EAL), the physical phenomenon that triggers the printing process in terms of bubble formation and jet development, printing process parameters, and major factors related to the post-printing …

Direct Selective Laser Synthesis Of Cucrfenitial High Entropy Alloy From Elemental Powders Through Selective Laser Melting, Joni Dhar, Lazaro Lopez, Shanshan Zhang, Ben Xu, Mohammed Jasim Uddin, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications and Presentations

This study investigated the synthesis of CuCrFeNiTiAl high entropy alloy (HEA) from pure elements using selective laser melting (SLM). The objectives are to validate the feasibility of the HEA fabrication from elemental powder materials, and to examine the effect of various process conditions in SLM, such as laser power, point distance and laser exposure time, on the microstructures formed. The as-built samples under high, medium and low energy densities were characterized by X-ray diffraction (XRD), and the microstructures were observed using scanning electron microscopy (SEM). The XRD results showed that five major crystal structure phases (hexagonal, monoclinic, orthorhombic, body-centered cubic …

Application Of Optimized Laser Surface Re-Melting Process On Selective Laser Melted 316l Stainless Steel Inclined Parts, Jafar Ghorbani, Jianzhi Li, Anil K. Srivastava

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Lower surface quality of selective laser melting (SLM) manufactured parts remains to be a key shortcoming particularly for high performance functional components. In this paper, the authors utilized Box–Behnken methodology to explore the effect of laser surface re-melting process parameters. The process parameters are:laser power, laser exposure time, laser point distance, and shell layer thickness. The experiments were conducted using Renishaw AM-250 machine. SLM manufactured parts with inclination of 45˚ up-skin were treated with a given surface roughness using laser surface re-melting (LSR). The optimization of process parameters was conducted using response surface methodology and the validation tests was carried …

Experimental Study Of Graphene Energy Absorbing Layer In Femtosecond Infrared Laser Assisted Bioprinting, Chaoran Dou

Theses and Dissertations

The bioprinting, as a new branch of additive manufacturing, already shown its potential in organ transplantation, medicine develop and personalized medicine. There are three types of bioprinting: droplet based bioprinting, extrusion based bioprinting and laser assisted bioprinting (LAB). Compared with other types of bioprinting, the LAB is the only bioprinting method that does not have a nozzle, which gives it the ability to print high viscosity bioink. The LAB also enjoys higher resolution and cell viability than other methods.

The bubble/jet formation process is the most important process for the LAB, which deposits the bioink to the substrate. To utilize …

Study Of Selective Laser Remelting Of 316l S.S. To Reduce Roughness On Inclined Surface, Jafar Ghorbani

Theses and Dissertations

Additive manufacturing (AM) technologies are increasingly competing with subtractive methods, and there are promising applications for additive technologies that are hybrid with traditional manufacturing methods. Poor surface roughness of additive manufactured parts continues to be a major challenge especially for advanced functional parts. In this study, effect of processing parameters are evaluated, optimized and verified by using the Box–Behnken design of experiment method. The results, for the first time, reveal that surface remelting has the potential to become a high speed approach for improving the roughness of non-horizontal surface of additive manufactured parts.

A Decision Support System To Measure Product Suitability For Additive Manufacturing Processes, Cynthia De Vasconcellos Barros

Theses and Dissertations - UTB/UTPA

Additive Manufacturing (AM) technologies started arising around 1980’s and they are currently considered to be the third industrial revolution. With improvements in computers, materials, and automated machines, manufacturers across several types of industries are becoming more familiar with AM processes, and it has become more common to see products that are being fabricated by using this new technology. However, there are still questions regarding when it is suitable to use Additive Manufacturing or conventional manufacturing processes depending on different factors. The purpose of this thesis is to create a Decision Support System (DSS) that will help users measure product suitability …