Engineering Commons^™

A Genetic Algorithm Incorporating Design Choice For The Preliminary Design Of Unmanned Aerial Vehicles, Kenneth Michael Mull

Masters Theses

Unmanned Aerial Vehicles (UAVs) are currently at the forefront of aerospace technologies. The design of these aircraft is complex and often performance characteristics are coupled to multiple design attributes. At the early design phase both discrete and continuous design choices are present limiting the feasibility of traditional derivative based optimization techniques. In place of these methods, the design space can be explored using a genetic algorithm that mimics the process of natural selection, providing a capable and reliable base airframe constructed from the required performance metrics. By incorporating a genetic multidisciplinary optimization algorithm early in the conceptual design phase, aircraft …

Optimal Design Of Automotive Exhaust Thermoelectric Generator (Aeteg), Hassan Fagehi

Masters Theses

A consumption of energy continues to increase at an exponential rate, especially in terms of automotive spark ignitions vehicles. About 40% of the applied fuel into a vehicle is lost as waste exhaust to the environment. The desire for improved fuel efficiency by recovering the exhaust waste heat in automobiles has become an important subject. The thermoelectric generator (TEG) has the potential to convert exhaust waste heat into electricity as long as it is improving fuel economy. The remarkable amount of research being conducted on TEGs indicates that this technology will have a bright future in terms of power generation. …

Design And Validation Of An Electro-Hydraulic Pressure-Control Valve And Closed-Loop Controller, Jerry Boza

Dissertations

Electro-hydraulic pressure-control valves are used in many applications, such as manufacturing equipment, agricultural machinery, and aircrafts to name a few. They are often used to actuate hydraulic clutches, such as those found in power shift transmissions. A traditional pressure-control valve with open-loop control algorithm is typically used in clutch applications. This scheme often results in inconsistent or undesirable system behavior due to the nature of open-loop control as well as the nonlinear system dynamics and uncertainties.

In this research two new electro-hydraulic pressure-control valves were designed in order to decouple the valve and control port (hydraulic) dynamics. This was achieved …

Design And Prototyping Of An Adjustable Putter, Daulton Morgan

Industrial and Manufacturing Engineering

Being able to demo a golf putter is essential for a golfer since the feel of the putter is critical in determining what suits the golfer best. Due to the market being primarily dominated by right-handed players, it is difficult for left-handed players to demo high quality putters since the selection is sparse.

This report is about designing and integrating an interchangeable fastening system that allows a putter to be altered between a right and left-handed orientation, while still maintaining the traditional look of a putter. The report covers the necessary design steps, the prototyping of the putter, the projected …

Co-Design: A Contemporary Path To Innovation And Entrepreneurship For People With Disabilities, Liz Depoy, Stephen F. Gilson

Poster Presentations

40 Year History: Began as participatory design. Was aimed at redressing product failure. Today: Co-design engages service and product users as full collaborators in a collective intelligence and invention process at the fuzzy front end of the design process.

Mechanical Design And Optimization Of An Interactive Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (2012-2016)

Animatronics is a specialized sub-category of mechatronics, a fusion of mechanical and electrical engineering. The field has grown from small, individual projects into a major industry. As animatronics progress, mechanical engineers are pushed to design internal structures which occupy ever-decreasing spaces and to ensure designs can undergo maintenance and modifications smoothly. This research investigates methods of reducing space required for mechanisms and several other beneficial methods of development as well as varying satisfactions for audiences when exposed to actor-controlled systems rather than pre-scripted functions. The mechanical systems are designed using CAD software available at Georgia Southern. On-campus, resources are used …

An Engineering Approach To Industrial Research And Development Of Pillows, Wesley Patterson

Mahurin Honors College Capstone Experience/Thesis Projects

Comfort during sleep, though taken for granted, involves a great amount of research and engineering. Few give it a second thought, but nearly one-third of a person’s life is spent with their head on a pillow, thus making them a point for increased quality. Having been approached by a tier-1 bedding manufacturer, a team of both mechanical and electrical engineers was been tasked with the goal of creating a valid research tool that the customer, Tempur-Sealy, will utilize in the company’s research and development of high-end pillows. The team sought to tackle this project utilizing tools and knowledge gained throughout …

Design, Testing And Evaluation Of Robotic Mechanisms And Systems For Environmental Monitoring And Interaction, James K. Higgins

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Unmanned Aerial Vehicles (UAVs) have significantly lowered the cost of remote aerial data collection. The next generation of UAVs, however, will transform the way that scientists and practitioners interact with the environment. In this thesis, we address the challenges of flying low over water to collect water samples and temperature data. We also develop a system that allows UAVs to ignite prescribed fires. Specifically, this thesis contributes a new peristaltic pump designed for use on a UAV for collecting water samples from up to 3m depth and capable of pumping over 6m above the water. Next, temperature sensors and their …

Design For Manufacturability: Off-Road Toyota Bumper, Drew Donlon

Industrial and Manufacturing Engineering

The purpose of this project is to design a new off-road bumper that is improved from the stock form of a 1996-2002 Toyota 4Runner and a 1996-2004 Toyota Tacoma. The current state of the component is too weak to endure to off-road endeavors, and a kit bumper market is virtually untapped for these vehicles. The objectives of this project were met by redesigning the stock front bumper, conducting a finite element analysis on the model to test for strength, prototyping the bumper with CNC cut cardboard, and conducting a full cost analysis including the costs for waterjet and laser cutting …

E-Learning Design For Microsoft Access & Asp.Net, Jonathan Choi, Christopher Hom

Industrial and Manufacturing Engineering

The problem definition is that the current video tutorial series is outdated and lacks interactive features that aid with E-Learning. The goal of the project is to create a platform that incorporates features such as structure, interaction, assessments, and competency tests. The project revolved around integrating four softwares together in order to create an effective E-Learning platform. The four softwares were Adobe Captivate, Camtasia, Microsoft Access and Microsoft Visual Studios. Adobe Captive is used to store the tutorial video and assign quizzes. Camtasia is used to record the tutorial videos. Microsoft Access is used to store all the questions given …

Automated Bearing Press, David Baker, David Brock, Engelbert Diec

Mechanical Engineering

Our group was presented with a challenge to design an automated machine to replace Micro-Vu’s current manual pressing operation. We moved, planned, and scheduled our tasks for the three quarters we will be working on this project by using a Gantt chart. In designing the machine, we generated concepts and used analysis and prototyping to select the most promising ones. Our final design uses a pneumatic press to press the parts, and it includes magazines to hold the parts before pressing, pneumatic actuators to move the parts to and from the pressing location, and a lever to separate the defective …

Walking Simulator Mechanism, Titus Lungu, Igor Tachynskyy, Omri Tayyara

The Downtown Review

This paper presents the design, simulation, and kinematic evaluation of a mechanism aimed at simulating both the motion and ground reaction forces produced by a human foot while walking. Such a mechanism can be used to test the durability of shoes through life cycle analysis. In attempting to mimic the physical motion of the human foot as closely as possible, the forces experienced by the human foot were also accurately replicated through the incorporation of a non-stationary testing platform. As is shown in the paper, this testing environment allows for simple adjustments to be made in order to simulate different …

Orchard Bin Atv Trailer, Neil F. Leitz

All Undergraduate Projects

A local orchardist was experiencing a problem that was being caused by their lack of apple picking bin moving equipment. The orchardist needed a well-engineered solution to this lack of equipment. The solution arrived at was a five bin trailer. There were multiple design requirements for this trailer, including the device needing to be able to interface with an ATV, be able to be loaded by hand, be able to carry five bins, and not exceed a budget of $750. While perfecting the design of the trailer, a number of different disciplines were utilized, which included dynamics, kinematics, static loading …

Asme Mini Rc Baja: Drivetrain, Jason M. Moore

All Undergraduate Projects

Title and author: ASME mini RC Baja Drivetrain by Jason Moore; partner Mike Cox. (Engineering Technologies, Safety, and Construction)

Abstract/Artists Statement: The issue that this project is concerned with is how to design and build a drivetrain, steering and suspension systems for an RC car. The systems must be simple and functional. Furthermore, these systems will be designed to fit on a small chassis and not interfere with each other. They also need to be strong and durable enough to propel the car forward and maneuver through various obstacles and be built in a way that is easy to take …

Design And Experimental Investigation Of An Oxy-Fuel Combustion System For Magnetohydrodynamic Power Extraction, Manuel Johannes Hernandez

Open Access Theses & Dissertations

A general consensus in the scientific and research community is the need to restrict carbon emissions in energy systems. Therefore, extensive research efforts are underway to develop the next generation of energy systems. In the field of power generation, researchers are actively investigating novel methods to produce electricity in a cleaner, efficient form. Recently, Oxy-Combustion for magnetohydrodynamic power extraction has generated significant interest, since the idea was proposed as a method for clean power generation in coal and natural gas power plants. Oxy-combustion technologies have been proposed to provide high enthalpy, electrically conductive flows for direct conversion of electricity. Direct …