Engineering Commons^™

A Finite Difference Implementation Of Phase Field Theory, Nicholas W. Oren

Master's Theses

Computationally handling cracks generally results in numerically unstable results. Specifically handling the infinite stresses at the crack tip as well as the abrupt change from virgin material to failed material creates numerical instabilities. This project seeks to determine if phase field physics theory, particularly the physics based modification developed by B. N. Cassenti, can be appropriately applied to cracks. Phase field theory introduces an additional state variable, the phase of the material. The phase represents the level of failure (by cracking), and diffuses the failure along a crack by specified equations. The modification, based on a variational principle, was tested …

Production Of A Banjo: Development Of Manufacturing Processes For Banjo Resonators,Rims, And Necks., Kevin N. Zollinger

Undergraduate Honors Theses

This body of research focused on the development of prototype tooling and manufacturing processes to produce resonators, rims, and necks for building banjos. The resulting fixtures and manufacturing processes were designed for ease of use by a single employee in a small shop environment. This research required proficiency in interdisciplinary mediums (ie. 2D modeling, 3D modeling, centerline tool path program generation, 2D modeling, 3D modeling, rendering, design, and woodworking).

The resonator required development of a matching set of forming surfaces, a bending/gluing fixture, a work-holding fixture for utilizing a wood lathe, and a steam chamber required for bending strips of …

Methods For Identifying Acoustic Emissions From The Front Face Of A Small Piezoelectric Blower, Brad K. Solomon

Theses and Dissertations

This thesis focuses on identifying acoustic noise generating components in piezoelectric blowers through transverse velocity measurements and the development of a numerical fluid model. Piezoelectric ceramics have proven useful for many industries and areas of research involving: high precision actuators, noise control, ultrasonic devices, and many other areas. As of late, a unique adaptation of piezoelectric ceramics is surfacing in the area of pumping and cooling. Air pumps that use these ceramics replace the traditional electric motor, resulting in lower power consumption, less moving parts, constant pressure gradients, lower overall weight, and a low profile. The current drawback of this …

Optimal Inertial Sensor Placement And Motion Detection For Epileptic Seizure Patient Monitoring, Babak Kamalizonouzi

Electronic Thesis and Dissertation Repository

Use of inertial sensory systems to monitor and detect seizure episodes in patients suffering from epilepsy is investigated via numerical simulations and experiments. Numerical simulations employ a mathematical model that is able to predict human body dynamic responses during a typical epileptic seizure. An optimized inertial sensor placement procedure is developed to address achievement of highest possible sensing resolution in determining angular accelerations with minimal errors. In addition, a joint torque estimation procedure is formulated to assist in the future development of a possible detection scheme. Experimental motion data obtained from an epileptic seizure patient as well as a healthy …

Parametric Study On A Novel Waste Heat Recovery System, Ghaleb Rustom Abdul Sater

Electronic Thesis and Dissertation Repository

The present thesis is based on an industry-sponsor project involving a novel waste heat-to-electricity conversion system. This proprietary system utilizes thermal energy from a low temperature heat sources to produce torque that drives an electric generator to produce electricity. The system needs to be studied through scientific research to help with optimizing the product development, component design, and overall system performance. The main objectives of this study are to develop simulation tools (numerical model) that will allow to simulate the thermo-fluid processes in various system components and to use this numerical model to study the heat transfer and phase-change processes …

Development Of A Compact Piezoworm Actuator For Mr Guided Medical Procedures, Khaled El Bannan

Electronic Thesis and Dissertation Repository

In this research, a novel piezoelectric actuator was developed to operate safely inside the magnetic resonance imaging (MRI) machine. The actuator based on novel design that generates linear and rotary motion simultaneously for higher needle insertion accuracy. One of the research main objectives is to aid in the selection of suitable materials for actuators used in this challenging environment. Usually only nonmagnetic materials are used in this extremely high magnetic environment. These materials are classified as MRI compatible materials and are selected to avoid hazardous conditions and image quality degradation. But unfortunately many inert materials to the magnetic field do …

The Effects Of Freestream Turbulence On Serpentine Diffuser Distortion Patterns, Jesse Scott Johnson

Theses and Dissertations

Serpentine diffusers have become a common feature in modern aircraft as they allow for certain benefits that are impossible with a traditional linear configuration. With the benefits, however, come certain disadvantages, namely flow distortions that reduce engine efficiency and decrease engine surge stability margins. These distortions are now being researched comprehensively to determine solutions for mitigating the adverse effects associated with them. This study investigates how varying the freestream turbulence intensity of the flow entering a serpentine diffuser affects the distortion patterns that are produced by the diffuser. Experiments were performed with a model serpentine diffuser on the Annular Cascade …

Experimental Investigation Of The Fluid Temperature Field And The Thermal Performance Of Insert Devices In A Flat-Plate Solar Collector, Gurveer Singh Sandhu

Electronic Thesis and Dissertation Repository

An experimental study on the thermal flow behavior inside a flat-plate collector and the impact of insert devices (passive heat transfer enhancement techniques) on the thermal performance of the collector is presented. Temperature fields were obtained for different Reynolds numbers (250-650) and at different inclination angles of the collector. The results show that a stratified flow is developed inside the collector and the warmer fluid restricts itself to the upper portion of the collector only. Various new configurations of the conventional insert devices were tested over a wide range of Reynolds number (200-8000). Comparison of these devices show that in …

Vibrotactile Feedback Generation Using Envelope Waveforms And Eccentric-Mass Motors, Michael G. Plooster

Theses and Dissertations

The usefulness of vibrotactile feedback as a channel to communicate information has been widely recognized. However, most of the recent work on this subject uses actuators that are either too expensive or too large for many practical applications. This thesis explores the generation of vibrotacatile feedback patterns using a simple, inexpensive eccentric-mass motor that is constrained to use a constant voltage and a low on/off switching frequency. In particular, it explores the pulse timing method, which utilizes the slow transient response of the eccentric-mass motor to calculate pulse and rest times for an arbitrary envelope waveform shape. Several hardware tests …

Best Practices Using Building Information Modeling In Commercial Construction, Simon Beveridge

Theses and Dissertations

There has been an increase in adoption of building information modeling (BIM) by commercial contractors over the past few years but there is not a clear indication of current application or the frequency of each use. This research was undertaken to determine the frequency and best practices of using BIM in commercial construction. Leading commercial contracting firms were contacted and employees were selected to complete a telephone survey that was designed to determine how they are using BIM. It was found that BIM is being used with more frequency on projects, with plans to continue to implement it even further …

Comparison Of 3-D Friction Stir Welding Viscoplastic Finite Element Model With Weld Data And Physically-Simulated Data, Maria Posada

Theses and Dissertations

Models (both physical and numerical) of the friction stir (FS) welding process are used to develop a greater understanding of the influence of independent process parameters on dependent process output variables, such as torque, power, specific weld energy, peak temperature, cooling rates and various metallurgical factors (e.g., grain size and precipitates). An understanding of how the independent process parameters influence output variables and ultimately their effect on resultant properties (e.g., strength, hardness, etc..) is desirable. Most models developed have been validated primarily for aluminum alloys with relatively small amounts of experimental data. Fewer models have been validated for steels or …

Internal Wave Generation Over Rough, Sloped Topography: An Experimental Study, Lauren Elizabeth Eberly

Theses and Dissertations

Internal waves exist everywhere in stratified fluids - fluids whose density changes with depth. The two largest bodies of stratified fluid are the atmosphere and ocean. Internal waves are generated from a variety of mechanisms. One common mechanism is wind forcing over repeated sinusoidal topography, like a series of hills. When modeling these waves, linear theory has been employed due to its ease and low computational cost. However, recent research has shown that non-linear effects, such as boundary layer separation, may have a dramatic impact on wave generation. This research has consisted of experimentation on sloped, sinusoidal hills. As of …

Effective Collaboration Through Multi User Cax By Implementing New Methods Of Product Specification And Management, Vonn L. Holyoak

Theses and Dissertations

This thesis presents a new design process in which design specifications and task distribution are determined from a parallel multi user prospective. Using this method, projects are more easily decomposed into tasks that can be performed concurrently, thus decreasing the design time. Also, a framework is provided to determine the correct distribution of available talent and stakeholders that can be utilized on a given project. The research suggests that by involving the necessary stakeholders in a multi user setting, changes can be made quickly and without additional approval wait time. By including individuals from the various areas of required talent, …

Steam Reheat In Nuclear Power Plants, Paul John Marotta

Doctoral Dissertations

In this work, reheating steam from a commercial nuclear power plant is explored in order to increase efficiency and power output. A thermal source in the form of a High Temperature Gas Reactor (HTGR) is considered. Engineering challenges include proof-of-principle, reactor sizing, evaluation, and feasibility.

The proposed thermodynamic process modifications have been evaluated for a range of inlet steam quality conditions. The evaluation of the steam tube dimensions and number of optimal tubes have been calculated utilizing the so-called Log Mean Temperature Difference method. Subsequently, the performance of the steam tubes was further analyzed within a water vapor and liquid …

Strider: Manufacturing Processes, Michael Warren-Angelucci

Industrial and Manufacturing Engineering

The goal of the Strider Project is to create a mobility device that can support a person with weakened leg strength and enable them to be supported and maintain a standing position. A prototype of the Strider was created by three Mechanical Engineering students as their senior project. The topic of this senior project was to analyze and create a manufacturing process for the manufacture of the Strider that will be ergonomic and cost effective.

There were many things that needed to be accomplished in order to create the manufacturing process. The first step was to verify that the prototype …

Fuzzy Logic Controller For Parallel Plug-In Hybrid Vehicle, Sk. Khairul Hasan

Theses and Dissertations

Hybrid electric vehicles combine two methods for propelling a vehicle. In a parallel hybrid vehicle, the two propulsion methods work in parallel to meet the total power demand. Among different combination of power sources, internal combustion engine and electric motor drive system are the most popular because of their availability and controllability. Plug-in hybrid vehicle is the latest version in hybrid vehicle family. In plug-in hybrid vehicle, battery is directly recharged from the electrical power grid and it can be used for a long distance with higher efficiency. Most of the hybrid vehicles on the road are parallel in nature …

Preventing Sheet Metal Wrinkling In Coil Lines, David Steven Revers

Theses and Dissertations

Coil lines are used in metal packaging facilities to treat the metal before forming the final product. As the sidewalls of cans are becoming thinner and thinner, one can see that the equipment has not been designed properly to feed up lighter plate weight metal. Thinner can walls cause the metal sheet to be fed into the machine crooked and results in a wrinkling of the first few feet of metal, which then needs to be thrown away. Because the current equipment is not working properly, operators have been feeding sheets of metal up a ten-foot ladder into the machine …

Material Behavior Characterization Of A Thin Film Polymer Used In Lithium-Ion Batteries, Michael James Martinsen

Theses and Dissertations

The use of lithium-ion batteries in the automotive industry has become increasingly popular. As more hybrid and electric vehicles take to the road an understanding of how these batteries will behave structurally will be of greater concern. Impact testing can give a valuable overview of the strengths and weaknesses of a battery's design, however, these tests can be time consuming, expensive, and dangerous. Finite element analysis can deliver a reliable low cost approximation of physical testing results. The accuracy of FE results depends greatly on the mathematical representation of the material properties of Li-ion battery components. In this study, the …

Development Of Mems-Based Corrosion Sensor, Feng Pan

Graduate Theses and Dissertations

This research is to develop a MEMS-based corrosion sensor, which is used for monitoring uniform, galvanic corrosion occurring in infrastructures such as buildings, bridges. The corrosion sensor is made up of the composite of micro/nano metal particles with elastomers. The mechanism of corrosion sensor is based on the mass transport of corrosive species through the sensor matrix. When the metal particles in the matrix corrode, the electrical resistivity of the material increases due to increasing particle resistances or reduction of conducting pathways. The corrosion rate can be monitored by detecting the resistivity change in sensing elements. The life span of …

Silica Nanoparticle-Based Coatings With Superhydrophilic And Superhydrophobic Properties, Robert Andrew Fleming

Graduate Theses and Dissertations

Superhydrophilic and superhydrophobic surfaces have potential for implementation into a variety of fields, including self-cleaning surfaces, anti-fogging transparent materials, and biomedical applications. In this study, sandblasting, oxygen plasma treatments, silica nanoparticle films, and a low surface energy fluorocarbon film were employed to change the natural surface wettability of titanium, glass, and polyethylene terephthalate (PET) substrates, with an aim to produce superhydrophilic and superhydrophobic behavior. The effects of these surface modifications are characterized by water contact angles (WCAs), surface wetting stability, surface morphology and roughness, surface elemental composition, and optical transmittance measurements. The results show that stable superhydrophilic and superhydrophobic surfaces …

Distribution Map Of Multi-Walled Carbon Nanotubes In A Refrigerant/Oil Mixture Within A 2.5 Ton Unitary Air-Conditioner, Warren Russell Long

Graduate Theses and Dissertations

In recent years, nanoparticles have received considerable attention as a potential additive to heat transfer fluids (i.e. refrigerant) in order to increase the heat transfer capabilities of these fluids. The potential of carbon nanotubes (CNTs) to exit the compressor, migrate throughout a vapor compression air conditioning system, and possibly foul the components of such a system was experimentally investigated in this research. Six grams of CNTs were dispersed in the polyol ester oil used by a 2.5 ton (8.79 kW) unitary air conditioning system, which was continuously operated for 168 hours. After this time, the unit was shut down and …

Computational Fluid Dynamics Investigation Of The Orientation Of A Pediatric Left Ventricle Assist Device Cannula To Reduce Stroke Events, Stephen Guimond

HIM 1990-2015

Ventricle Assist Devices (VADs), which are typically either axial or centrifugal flow pumps implanted on the aortic arch, have been used to support patients who are awaiting cardiac transplantation. Success of the apparatus in the short term has led to long term use. Despite anticoagulation measures, blood clots (thrombi) have been known to form in the device itself or inside of the heart. The Ventricle Assist Devices supply blood flow via a conduit (cannula) implanted on the ascending aorta. Currently, the implantation angle of the VAD cannula is not taken into consideration. Since the VADs supply a significant amount of …

Application Potential Of Solar Pv, Wind And Fuel Cells Technologies For Global Sustainability Improvement, Qiang Zhai

Theses and Dissertations

This dissertation develops a systematic approach to comprehensively investigate the application potential of Solar PV, wind and fuel cells in reducing GHGs emissions for energy intensive global manufacturing industry. This systematic approach is developed by integrating the technological and economic characteristics of the clean energy technologies, as well as the local geographic conditions where the clean energy technologies may be deployed. This approach consists of the investigation on such aspects as: technological feasibility, capacity factor, FIT strength, Levelized energy cost, cost benefit and sensitivity.

In this dissertation, the systematic approach developed is applied on the application potential analyses of solar …

Testing, Analysis, And Model Verification Of Miniature Linear Permanent Magnet Generators, Michael Ray Rippee

Boise State University Theses and Dissertations

The military has become increasingly dependent on mobile electronic equipment to ensure success and safety of soldiers in remote locations. To operate the electronics, soldiers must carry batteries that can weigh up to 12kg (26.5lb). To decrease the load soldiers must carry, a backpack with an internal linear electric generator has been proposed to provide portable power for soldiers on foot. In designing a generator for this purpose, a simulation was developed to predict the power generation capacity of linear permanent magnet generators. This thesis presents work done to experimentally verify the theoretical simulation with a desired accuracy of 20%. …

Investigation Of The Noise Floor Of The Standard Piv Cross-Correlation Algorithm, Kyle L. Jones

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Particle image velocimetry (PIV) is a powerful measurement technique used to acquire instantaneous measurements of entire flow fields at a given instant in time. Quantifying the uncertainty and error in PIV is a critical part of realizing the full potential of PIV as a flow measurement technique.

The noise floor of PIV is the minimum amount of random error that can be achieved for a particular standard cross-correlation (SCC) algorithm. The noise floor of the SCC used by DaVis in correlating image pairs is explored. Two methods for creating image pairs for correlation are compared, namely pseudo image pairs and …

Closed-Loop Thrust And Pressure Profile Throttling Of A Nitrous Oxide/Hydroxyl-Terminated Polybutadiene Hybrid Rocket Motor, Zachary W. Peterson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hybrid motors that employ non-toxic, non-explosive components with a liquid oxidizer and a solid hydrocarbon fuel grain have inherently safe operating characteristics. The inherent safety of hybrid rocket motors offers the potential to greatly reduce overall operating costs. Another key advantage of hybrid rocket motors is the potential for in-flight shutdown, restart, and throttle by controlling the pressure drop between the oxidizer tank and the injector. This research designed, developed, and ground tested a closed-loop throttle controller for a hybrid rocket motor using nitrous oxide and hydroxyl-terminated polybutadiene as propellants. The research simultaneously developed closed-loop throttle algorithms and lab scale …

Performance Characterization Of Complex Fuel Port Geometries For Hybrid Rocket Fuel Grains, Andrew Bath

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Extensive research in hybrid rocket motors has taken place at the department of Mechanical and Aerospace Engineering at USU (Utah State University) in the last several years. USU has one of the few facilities in the country capable of static-test firing rocket motors on-campus, which allows for fast-paced testing and development not available elsewhere. Research has involved investigating propulsion devices for a range of applications, including micro-satellite thrusters, hot-gas generators, and even jet-assisted takeoff kick motors. Hybrid motors have the advantage of safety over any other chemical propulsion. Since the fuel and oxidizer are stored seperately, they are relatively inert …

Design And Construction Of A Tunable Light Source With Light Emitting Diodes For Photosynthetic Organisms, Nathan Phillipps

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis describes and documents the design and construction of a light source which is tunable and has the ability to mimic the spectral output of the sun in the photosynthetic active radiation range (400 - 700 nm). To adjust the spectral output at different wavelengths different types of LEDs were chosen and combined. This thesis describes the design, construction, testing, and suggestions for further improvements to this light source. The light source is comprised of 900 LEDs with 26 different peak wavelengths within the photosynthetically active radiation range. The light source is made tunable through the use of a …

Development Of Feature Recognition Algorithm For Automated Identification Of Duplicate Geometries In Cad Models, Aravind Shanthakumar

All Theses

This research presents a feature recognition algorithm for the automated identification of duplicate geometries in the CAD assembly. The duplicate geometry is one of the seven indicators of the lazy parts mass reduction method. The lazy parts method is a light weight engineering method that is used for analyzing parts with the mass reduction potential. The duplicate geometry is defined as any geometries lying equal to or within the threshold distance with the user-defined orientation between them and have the percentage similarity that is equal to or greater than the threshold value. The feature recognition system developed in this research …

Integration Of Process Parameter Control And Digital Image Correlation Methods In An Investigation Of The Variability Of Marine Polymer Matrix Composite Material Properties, Keith Andrew Berube

Electronic Theses and Dissertations

The very nature of continuous fiber composite materials, with their heterogeneous structure of layered and interwoven fibers bound together by a polymer resin matrix, lead to an inevitable variability in mechanical properties. This is especially true if the fabrication process is not well controlled. Unlike fabricating components with metals, where the properties of the material are known beforehand, the final properties of the composite material are determined during the process of fabricating the composite part. The research described herein was undertaken to better enable the use of polymer matrix composites in the marine construction industry by developing a knowledge base …