Engineering Commons^™

Development Of A New Electro-Osmotic Consolidation Apparatus, Yenni Mariana Ramírez-Mazo, Juan Pablo Osorio, Sergio Agudelo

Conference papers

Electro-osmotic consolidation is a ground improvement technique in which a DC voltage is applied to the soil via electrodes, in order to drain the water contained in the pores increasing the effective stress, and thus improving the geotechnical properties of the soil. The technique increases the shear strength, reduces the compressibility, and changes the chemical composition of the saturated soft clayey and silty soils to which it can be applied. Electro-osmotic consolidation has been successfully applied in different projects worldwide. This paper presents the development of a new electro-osmotic consolidation apparatus built at Universidad de Antioquia. Tests were carried on …

Gamification Of Icebreaking Activities For Mechanical Engineering Students Embarking On A Problem Based Learning Module, Kevin Delaney, Gerard Nagle, Mingzhu Chen

Conference papers

When they enter the workforce engineering graduates must be able to engage collaboratively with others to find solutions to complex engineering challenges. This involves a great deal more than simply solving technical problems traditionally taught in engineering school. The Mechanical Engineering Discipline in Technological University Dublin (TU Dublin) has helped students develop real-world engineering skills through a team based Problem Based Learning (PBL) module since 2005. This module, involving third year students, can be particularly challenging since participants can join the third year of the program from other programs or universities and many will not have known each other prior …

Problem Based Learning: A Case Study From Mechanical Engineering, Kevin Delaney, Ger Nagle

Conference papers

Engineering graduates today must be capable of much more than solving technical problems taught in engineering school. Despite learning to quantify the performance of certain engineering objects, undergraduate students find it challenging to integrate these elements into basic design concepts through a coherent and systematic design process. To help students develop real-world engineering skills as part of their engineering education, the Mechanical Engineering Discipline in Technological University Dublin (TU Dublin) introduced Problem Based Learning (PBL) for Third Year Mechanical Engineering students in 2005.

A recent review of this teaching approach highlighted deficiencies not envisaged when the initial PBL module was …

A Review Of 3d Gis For Use In Creating Virtual Historic Dublin, Alain Chenaux, Maurice Murphy, S. Pavia, S. Fai, T. Molnar, John Cahill, Shane Lenihan, A. Corns

Conference papers

This paper illustrates how BIM integration with GIS is approached as part of the workflow in creating Virtual Historic Dublin. A design for a WEB based interactive 3D model of historic buildings and centres in Dublin City (Virtual Historic Dublin City) paralleling smart city initiates is now under construction and led by the National Monuments at the Office of Public Works in Ireland. The aim is to facilitate the conservation and maintenance of historic infrastructure and fabric and the dissemination of knowledge for education and cultural tourism using an extensive Historic Building Information Model. Remote sensing data is now processed …

What Is A Bim Design Model?, James Peters, Malachy Mathews

Conference papers

The recent report into Building Information Management or BIM, by construction law experts May Winfield and Sarah Rock entitled “Winfield Rock Report” [1] gives reason to state that the UK architectural, engineering and construction industry or AEC, is hindered by the absence of a clear definition of Level 2 BIM. The ISO 19650-2 standard published in 2019, is based upon PAS1192-2:2013. The intent of ISO 19650-2 is to provide a road map to facilitate the standardisation of BIM process in a uniformed fashion. A key pillar of ISO 19650 is the “information cycle” and central to this is a federated …

Evaluation Of Wind Energy Forecasts: The Undervalued Importance Of Data Preparation, Gianni Goretti, Aidan Duffy

Conference papers

The evaluation of wind energy forecasts is a key task for those involved in the wind power sector, and the accurate evaluation of forecasts is fundamental to make informed decisions both in business and research. To evaluate the accuracy of a forecast, observed values must be compared against forecast values over a test period. At times, however, the actual generation of a wind farm can be affected by factors that are outside the scope of the forecast model. Evaluating a forecast using a data set that includes such out-of-scope observations might give a biased or inconsistent assessment. In the data …

Ambiqual – A Full Reference Objective Quality Metric For Ambisonic Spatial Audio, Miroslaw Narbutt, Andrew Allen, Jan Skoglund, Michael Chinen, Andrew Hines

Conference papers

Streaming spatial audio over networks requires efficient encoding techniques that compress the raw audio content without compromising quality of experience. Streaming service providers such as YouTube need a perceptually relevant objective audio quality metric to monitor users’ perceived quality and spatial localization accuracy. In this paper we introduce a full reference objective spatial audio quality metric, AMBIQUAL, which assesses both Listening Quality and Localization Accuracy. In our solution both metrics are derived directly from the B-format Ambisonic audio. The metric extends and adapts the algorithm used in ViSQOLAudio, a full reference objective metric designed for assessing speech and audio quality. …

The Impact Of Power Curve Estimation On Commercial Wind Power Forecasts - An Empirical Analysis, Gianni Goretti, Aidan Duffy, Tek Tjing Lie

Conference papers

An increasing number of utilities participating in the energy market require short term (i.e. up to 48 hours) power forecasts for renewable generation in order to optimize technical and financial performances. As a result, a large number of forecast providers now operate in the marketplace, each using different methods and offering a wide range of services. This paper assesses five different day-ahead wind power forecasts generated by various service providers currently operating in the market, and compares their performance against the state-of-the-art of short-term wind power forecasting. The work focuses on how power curve estimations can introduce systematic errors that …

Using Photovoltaics To Power Electrochemical Chloride Extraction From Concrete, Sean Bond, Lynette O'Callaghan, Niall Holmes Dr., Brian Norton

Conference papers

Corrosion of embedded steel in reinforced concrete (RC) is a world-wide problem, that reduces structural performance and lifespan. Chloride attack may be a result of seawater, de-icing salts or contaminated admixtures, brought on by ingress of chlorides into the concrete. Electrochemical Chloride Extraction (ECE) is a non-destructive treatment for contaminated RC structures, that due to uncertainty of treatment times and applied current densities, is only 50% effective. It is often diesel powered has an environmental impact and often very costly due to the long treatment times. To improve the efficiency of ECE the influences of concrete resistance, cement type and …

Solar Photovoltaic System Control Topology Investigation For Power Source Mismatch, Lynette O'Callaghan

Conference papers

An investigation into solar photovoltaic (PV) system control topology selection, when partial shade is anticipated in the solar array, is presented. As available area is maximised in Building Integrated PV (BIPV) systems, shading is an inevitable consequence. The presence of partial shading in a PV array leads to multiple power peaks in the power-voltage curve, due to bypass diode sections being triggered, and an increase in module mismatch losses in the array. A building energy design software, Integrated Environmental Solutions, is used to determine the shadowed area on PV modules throughout the year, incorporating the PV system location and geometrical …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Technological University Dublin since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" and …

An Energy Cube Project For Teaching Engineering Design Process, Fionnuala Farrell, Shannon Chance, Micheal O'Flaherty

Conference papers

This year, the College of Engineering and the Built Environment at our institute inaugurated a new Common First Year design project module that helps inform students in the selection of a specific engineering discipline. Each student, prior to selecting their bachelor’s specialism, completes three group-based design projects: a bridge design project (to familiarise students with civil and structural engineering), a RoboSumo project (involving robotics, programming, electrical and electronics engineering), and an Energy Cube project (introducing fundamentals of mechanical, manufacturing and design, and building services engineering). This paper focuses on how the engineering design process was taught via the Energy Cube. …

Educational Programmes For Spatial Information Sciences In The Technological University Of Dublin, William Prendergast, Eamonn Murphy, Audrey Martin, Avril Behan

Conference papers

The ever increasing spatial information needs of society, the rapid development of new surveying technologies, and the global demand for appropriately qualified surveyors, have triggered a radical re-evaluation of geomatics education worldwide. Significant enhancements have been made to the educational programmes in the spatial information science discipline in the Technological University of Dublin’s (DIT) during the last decade including the provision of a BSc in Geomatics and various masters’ programmes to cater for the increasingly specialised needs of the Geographic Information sector in Ireland.

Time And Pitch Scale Modification: A Real-Time Framework And Tutorial, Dan Barry, David Dorran, Eugene Coyle

Conference papers

A framework is presented which is designed to address the issues related to the real-time implementation of time-scale and pitch scale modification algorithms. This framework can be used as the basis for the developments of applications which allow for a seamless real-time transition between continually varying time scale and pitch-scale parameters which arise as a result of manual or automatic intervention.

Introducing New Engineering Students To Mechanical Concepts Through An “Energy Cube” Project, Micheal O'Flaherty, Shannon Chance, Fionnuala Farrell, Christopher Montague

Conference papers

The objective of this paper is to describe a problem based learning module, called the “Energy Cube”, offered by Technological University Dublin that is designed to teach mechanical, building services and manufacturing engineering concepts to first year engineering students.

The Energy Cube project gives students hands-on experience in areas ranging from heat transfer, lighting and energy efficiency to industrial and product design. In the Energy Cube, students design and construct (using cardboard, clear plastic, and glue) a model of a building that admits as much daylight as possible while being energy efficient and aesthetically pleasing.

The students, working in teams …

Thermal Control Of An Occupied Room: Investigating The Use Of Carbon Dioxide Concentration As An Auxiliary Control Variable, Kevin O'Connell, Aidan O'Dwyer

Conference papers

This paper details the theoretical and experimental work done in the examination of the relationship between human generated carbon dioxide concentration and temperature rise in an occupied room. Generation of carbon dioxide by humans is linked to metabolic rate and heat generation. Therefore, carbon dioxide concentration may be used as an indicator of occupancy in a room. Typically, a heating control system will react slowly to changes in room occupancy if temperature is used as the process variable. The aim of the work was to establish if carbon dioxide concentration in the space could be used as an auxiliary control …

Reducing Energy Costs By Optimizing Controller Tuning, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this technique, it is necessary to adjust the controller parameters according to the nature of the process. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller tuning, based on process information). Such tuning rules allow the easy set up of controllers to achieve optimum performance at commissioning. Importantly, they allow ease of re-commissioning if the characteristics of the process change. The paper outlines the results …