Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Acoustics (3)
- Acoustic modeling (1)
- Acoustic modes (1)
- Cavity resonance (1)
- Combustion property target (1)
-
- Computational fluid dynamics (1)
- Computer modeling (1)
- DCN (1)
- Derived cetane number (DCN) (1)
- Direct numerical simulation (1)
- Dynamic line rating (1)
- Explosive blast (1)
- Finite element modeling (1)
- Fuel Cell (1)
- Hazard risk (1)
- Helmholtz equation (1)
- Helmholtz resonator (1)
- Immersed-boundary method (1)
- Infinite duct (1)
- Katabatic flows (1)
- Layout optimization (1)
- Low speed pre-ignition (LSPI) (1)
- Lubricant oil (1)
- Microphones (1)
- Neural Network (1)
- Passenger safety (1)
- Physical and cyber threats (1)
- Physics (1)
- Platform layout design (1)
- Quadrupole (1)
- Publication
Articles 1 - 30 of 31
Full-Text Articles in Engineering
Prediction Of Solid Oxide Fuel Cell Performance Using Artificial Neural Network, M. A. Rafe Biswas, Kamwana N. Mwara
Prediction Of Solid Oxide Fuel Cell Performance Using Artificial Neural Network, M. A. Rafe Biswas, Kamwana N. Mwara
M. A. Rafe Biswas
The Girl Scout Climbing Wall Multidisciplinary Service-Learning Project, Margaret Pinnell, Corinne M. Daprano, Gabrielle Williamson
The Girl Scout Climbing Wall Multidisciplinary Service-Learning Project, Margaret Pinnell, Corinne M. Daprano, Gabrielle Williamson
Corinne M. Daprano
The Girl Scout Wall (GS Wall) project was implemented in two classes at the University of Dayton (UD): a Mechanical and Aerospace Engineering (MAE) course, and a Health and Sports Science (HSS) course, and Sport Facility Management. The MAE course, Introduction to Materials, is a three-credit, third-year required course where students learn about the basic structure and properties of materials as well as the principles of material selection. The Sport Facility Management course is a three-semester hour, required HSS course where students are introduced to the processes of planning, constructing, equipping, maintaining, and managing sport facilities.
Cfd Simulation Of Passenger Hazard Risk At Railway Station Platforms Due To Explosive Air Blasts, Vivian Lawrence, Sakdirat Kaewunruen, Gianni Bartoli, Charalampos Baniotopoulos
Cfd Simulation Of Passenger Hazard Risk At Railway Station Platforms Due To Explosive Air Blasts, Vivian Lawrence, Sakdirat Kaewunruen, Gianni Bartoli, Charalampos Baniotopoulos
Sakdirat Kaewunruen
Application Of Pca To Cardiac Optical Mapping, Louis Woodhams
Application Of Pca To Cardiac Optical Mapping, Louis Woodhams
Louis Woodhams
Induction Heating Of Thin Films, Paul L. Bergstrom, Melissa L. Trombley
Induction Heating Of Thin Films, Paul L. Bergstrom, Melissa L. Trombley
Paul Bergstrom
A method of performing regional heating of a system having a substrate. The method may include applying a thin film to the system, and controllably energizing a coil positioned near the thin film. The energized coils thereby generate a magnetic flux. The method further includes inducing a current in the thin film with the magnetic flux thereby heating the system.
Presentation Of Double Inlet Scpp, Nima Fathi, Seyed Sobhan Aleyasin, Patrick Wayne, Peter Vorobieff
Presentation Of Double Inlet Scpp, Nima Fathi, Seyed Sobhan Aleyasin, Patrick Wayne, Peter Vorobieff
Nima Fathi
No abstract provided.
Evaluation And Enhancement Of Clean Energy Systems: Analytical, Computational And Experimental Study Of Solar And Nuclear Cycles, Nima Fathi
Nima Fathi
Us Patent 9,702,573: Nested Heat Transfer System, Sanza Kazadi
Us Patent 9,702,573: Nested Heat Transfer System, Sanza Kazadi
Sanza Kazadi
Us Patent 9,702,633: Entrochemical Energy Transfer System And A Process For Obtaining Work From Environmental Thermal Energy, Sanza Kazadi
Us Patent 9,702,633: Entrochemical Energy Transfer System And A Process For Obtaining Work From Environmental Thermal Energy, Sanza Kazadi
Sanza Kazadi
Direct Numerical Simulation Of Turbulent Katabatic Slope Flows With An Immersed-Boundary Method, Clancy Umphrey, Ray Deleon, Inanc Senocak
Direct Numerical Simulation Of Turbulent Katabatic Slope Flows With An Immersed-Boundary Method, Clancy Umphrey, Ray Deleon, Inanc Senocak
Inanc Senocak
We investigate a Cartesian-mesh immersed-boundary formulation within an incompressible flow solver to simulate laminar and turbulent katabatic slope flows. As a proof-of-concept study, we consider four different immersed-boundary reconstruction schemes for imposing a Neumann-type boundary condition on the buoyancy field. Prandtl’s laminar solution is used to demonstrate the second-order accuracy of the numerical solutions globally. Direct numerical simulation of a turbulent katabatic flow is then performed to investigate the applicability of the proposed schemes in the turbulent regime by analyzing both first- and second-order statistics of turbulence. First-order statistics show that turbulent katabatic flow simulations are noticeably sensitive to the …
Dynamic Rating Of Overhead Transmission Lines Over Complex Terrain Using A Large-Eddy Simulation Paradigm, Tyler Phillips, Ray Deleon, Inanc Senocak
Dynamic Rating Of Overhead Transmission Lines Over Complex Terrain Using A Large-Eddy Simulation Paradigm, Tyler Phillips, Ray Deleon, Inanc Senocak
Inanc Senocak
Dynamic Line Rating (DLR) enables rating of power line conductors using real-time weather conditions. Conductors are typically operated based on a conservative static rating that assumes worst case weather conditions to avoid line sagging to unsafe levels. Static ratings can cause unnecessary congestion on transmission lines. To address this potential issue, a simulation-based dynamic line rating approach is applied to an area with moderately complex terrain. A micro-scale wind solver — accelerated on multiple graphics processing units (GPUs) — is deployed to compute wind speed and direction in the vicinity of powerlines. The wind solver adopts the large-eddy simulation technique …
Vector Acoustic Intensity Around A Tuning Fork, Daniel A. Russell, Justin Junell, Daniel O. Ludwigsen
Vector Acoustic Intensity Around A Tuning Fork, Daniel A. Russell, Justin Junell, Daniel O. Ludwigsen
Daniel Ludwigsen
The acoustic intensity vector field around a tuning fork is investigated. Theory for a longitudinal quadrupole source predicts a well-defined transition between near-field and far-field, with significant circulation of sound energy in the near-field. Vector components of the time-averaged intensity were measured using a two-microphone intensity probe and found to agree well with predictions from theory. The vector intensity map is interpreted, and shown to provide useful information about the near-field of an acoustic source.
Better Understanding Of Resonance Through Modeling And Visualization, Daniel O. Ludwigsen, Cayla Jewett, Matthew Jusczcyk
Better Understanding Of Resonance Through Modeling And Visualization, Daniel O. Ludwigsen, Cayla Jewett, Matthew Jusczcyk
Daniel Ludwigsen
Students encounter cavity resonance and waveguide phenomena in acoustics courses and texts, where the study is usually limited to cases with simple geometries: parallelepipeds, cylinders, and spheres. Long-wavelength approximations help with situations of more complexity, as in the classic Helmholtz resonator. At Kettering University, we are beginning to employ finite element modeling in our acoustics classes to help undergraduates better understand the acoustic modes of actual structures. This approach to the time-independent wave equation (the Helmholtz equation) was first used in a research and measurements class to investigate two classic resonance problems. The first problem was a study of resonance …
Acoustic Testing And Modeling: An Advanced Undergraduate Laboratory, Daniel A. Russell, Daniel O. Ludwigsen
Acoustic Testing And Modeling: An Advanced Undergraduate Laboratory, Daniel A. Russell, Daniel O. Ludwigsen
Daniel Ludwigsen
This paper describes an advanced laboratory course in acoustics, specifically targeted for students with an interest in engineering applications at a school with a strongly integrated industrial co-op program. The laboratory course is developed around a three-pronged approach to problem solving that combines and integrates theoretical models, computational models, and experimental data. The course is structured around modules that begin with fundamental concepts and build laboratory skills and expand the knowledge base toward a final project. Students keep a detailed laboratory notebook, write research papers in teams, and must pass laboratory certification exams. This paper describes the course layout and …
Lube Oil Chemistry Influences On Autoignition As Measured In An Ignition Quality Tester, Francis M. Haas, Sang Hee Won, Frederick L. Dryer, Cécile Pera
Lube Oil Chemistry Influences On Autoignition As Measured In An Ignition Quality Tester, Francis M. Haas, Sang Hee Won, Frederick L. Dryer, Cécile Pera
Francis (Mac) Haas
Chemical Functional Group Descriptor For Jet Fuel Surrogate, Sang Hee Won, Francis M. Haas, Stephen Dooley, Frederick L. Dryer
Chemical Functional Group Descriptor For Jet Fuel Surrogate, Sang Hee Won, Francis M. Haas, Stephen Dooley, Frederick L. Dryer
Francis (Mac) Haas
Optimizing Compressed Air Storage For Energy Efficiency, Brian Abels, J. Kelly Kissock
Optimizing Compressed Air Storage For Energy Efficiency, Brian Abels, J. Kelly Kissock
J. Kelly Kissock
Compressed air storage is an important, but often misunderstood, component of compressed air systems. This paper discusses methods to properly size compressed air storage in load-unload systems to avoid short cycling and reduce system energy use. First, key equations relating storage, pressure, and compressed air flow are derived using fundamental thermodynamic relations. Next, these relations are used to calculate the relation between volume of storage and cycle time in load-unload compressors. It is shown that cycle time is minimized when compressed air demand is 50% of compressor capacity. The effect of pressure drop between compressor system and storage on cycle …
Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, J. Kelly Kissock, John Seryak
Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, J. Kelly Kissock, John Seryak
J. Kelly Kissock
Energy in manufacturing facilities is used for direct production of goods, space conditioning, and general facility support such as lighting. This paper presents a methodology, called lean energy analysis, LEA, for graphically and statistically analyzing plant energy use in terms of these major end uses.
The LEA methodology uses as few as 60 easily obtainable data points. Multivariable change-point models of electricity and natural gas use as functions of outdoor air temperature and production data are developed. The statistical models are used to subdivide plant energy use into facility, space-conditioning and production-related components.
These breakdowns suggest the savings potential from …
Energy Efficient Process Heating: Insulation And Thermal Mass, Kevin Carpenter, J. Kelly Kissock
Energy Efficient Process Heating: Insulation And Thermal Mass, Kevin Carpenter, J. Kelly Kissock
J. Kelly Kissock
Open tanks and exterior surfaces of process heating equipment lose heat to the surroundings via convection, radiation, and/or evaporation. A practical way of reducing heat loss is by insulating or covering the surfaces. This paper presents methods to quantify heat loss and energy savings from insulating hot surfaces and open tanks. The methods include radiation and evaporation losses, which are ignored by simplified methods. In addition, thermal mass, such as refractory, conveyor and racking equipment, acts as a heat sink and increases heating energy use in process heating applications. This paper presents lumped capacitance and finite-difference methods for estimating heat …
Improving Compressed Air Energy Efficiency In Automotive Plants: Practical Examples And Implementation, Nasr Alkadi, J. Kelly Kissock
Improving Compressed Air Energy Efficiency In Automotive Plants: Practical Examples And Implementation, Nasr Alkadi, J. Kelly Kissock
J. Kelly Kissock
The automotive industry is the largest industry in the United States in terms of the dollar value of production [1]. U.S. automakers face tremendous pressure from foreign competitors, which have an increasing manufacturing presence in this country. The Big Three North American Original Equipment Manufacturers (OEMs)-General Motors, Ford, and Chrysler-are reacting to declining sales figures and economic strain by working more efficiently and seeking out opportunities to reduce production costs without negatively affecting the production volume or the quality of the product. Successful, cost-effective investment and implementation of the energy efficiency technologies and practices meet the challenge of maintaining the …
Energy Efficient Process Heating: Managing Air Flow, Kevin Carpenter, J. Kelly Kissock
Energy Efficient Process Heating: Managing Air Flow, Kevin Carpenter, J. Kelly Kissock
J. Kelly Kissock
Much energy is lost through excess air flow in and out of process heating equipment. Energy saving opportunities from managing air flow include minimizing combustion air, preheating combustion air, minimizing ventilation air, and reconfiguring openings to reduce leakage.
This paper identifies these opportunities and presents methods to quantify potential energy savings from implementing these energy-savings measures. Case study examples are used to demonstrate the methods and the potential energy savings.The method for calculating savings from minimizing combustion air accounts for improvement in efficiency from increased combustion temperature and decreased combustion gas mass flow rate.
The method for calculating savings from …
Measuring Plant-Wide Energy Savings, J. Kelly Kissock, Carl Eger
Measuring Plant-Wide Energy Savings, J. Kelly Kissock, Carl Eger
J. Kelly Kissock
This paper presents a general method for measuring plant-wide industrial energy savings and demonstrates the method using a case study from an actual industrial energy assessment. The method uses regression models to characterize baseline energy use. It takes into account changes in weather and production, and can use sub-metered data or whole plant utility billing data. In addition to calculating overall savings, the method is also able to disaggregate savings into components, which provides additional insight into the effectiveness of the individual savings measures. Although the method incorporates search techniques and multi-variable least-squares regression, it is easily implemented using data …
Oscillations Of Biomimetic Scales Elastica, Hessein Ali
Oscillations Of Biomimetic Scales Elastica, Hessein Ali
Hessein Ali
Constraints On Acoustic Signaling Among Birds Breeding In Secondary Cavities: The Effects Of Weather, Cavity Material, And Noise On Sound Propagation, John P. Swaddle, Caitlin R. Kight, Saji Perera, Eduardo Davila-Reyes, Shena Sikora
Constraints On Acoustic Signaling Among Birds Breeding In Secondary Cavities: The Effects Of Weather, Cavity Material, And Noise On Sound Propagation, John P. Swaddle, Caitlin R. Kight, Saji Perera, Eduardo Davila-Reyes, Shena Sikora
John Swaddle
Increasing evidence suggests that anthropogenic noise from urbanization affects animal acoustic communication. We investigated whether the begging calls of nestling Eastern Bluebirds (Sialia sialis) varied along a disturbance gradient of ambient noise. Contrary to our prediction and the results of a previous study of nestling Tree Swallows (Tachycineta bicolor), we found that nestling Eastern Bluebirds did not increase the amplitude or structural characteristics—including frequency, rate, and duration—of their vocalizations in response to ambient noise. However, we found that prevalent temperature and humidity conditions attenuated begging calls. Specifically, in warmer, more humid weather, vocalizations of nestling Eastern …
Simulation Model Of An Automatic Commercial Ice Machine, Haithem Murgham, David Myszka, Vijay Bahel, Rajan Rajendran, Kurt Knapke, Suresh Shivashankar, Kyaw Wynn
Simulation Model Of An Automatic Commercial Ice Machine, Haithem Murgham, David Myszka, Vijay Bahel, Rajan Rajendran, Kurt Knapke, Suresh Shivashankar, Kyaw Wynn
David Myszka
Automatic commercial ice-making machines that produce a batch of cube ice at regular intervals are known as “cubers." Such machines are commonly used in food service, food preservation, hotel, and health service industries. The machines are typically rated for the weight of ice produced over a 24-hour period at ambient air temperatures of 90°F and water inlet temperature of 70°F.
These cubers typically utilize an air-cooled, vapor-compression cycle to freeze circulating water flowing over an evaporator grid. Once a sufficient amount ice is formed, a valve switches to enable a harvest mode, where the compressor’s discharge gas is routed into …
Development Of A Spring-Based Automotive Starter, David H. Myszka, Jonathan Lauden, Patrick Joyce, Andrew P. Murray, Christoph Gillum
Development Of A Spring-Based Automotive Starter, David H. Myszka, Jonathan Lauden, Patrick Joyce, Andrew P. Murray, Christoph Gillum
David Myszka
Automotive starting systems require substantial amounts of mechanical energy in a short period of time. Lead-acid batteries have historically provided that energy through a starter motor. Springs have been identified as an alternative energy storage medium and are well suited to engine-starting applications due to their ability to rapidly deliver substantial mechanical power and their long service life. This paper presents the development of a conceptual, spring-based starter. The focus of the study was to determine whether a spring of acceptable size could provide the required torque and rotational speed to start an automotive engine. Engine testing was performed on …
A Mechanical Regenerative Brake And Launch Assist Using An Open Differential And Elastic Energy Storage, David H. Myszka, Andrew P. Murray, Kevin Giaier, Vijay Krishna Jayaprakash, Christoph Gillum
A Mechanical Regenerative Brake And Launch Assist Using An Open Differential And Elastic Energy Storage, David H. Myszka, Andrew P. Murray, Kevin Giaier, Vijay Krishna Jayaprakash, Christoph Gillum
David Myszka
Regenerative brake and launch assist (RBLA) systems are used to capture kinetic energy while a vehicle decelerates and subsequently use that stored energy to assist propulsion. Commercially available hybrid vehicles use generators, batteries and motors to electrically implement RBLA systems. Substantial increases in vehicle efficiency have been widely cited. This paper presents the development of a mechanical RBLA that stores energy in an elastic medium. An open differential is coupled with a variable transmission to store and release energy to an axle that principally rotates in a single direction. The concept applies regenerative braking technology to conventional automobiles equipped with …
A Mechanical Regenerative Brake And Launch Assist Using An Open Differential And Elastic Energy Storage, David H. Myszka, Andrew P. Murray, Kevin Giaier, Vijay Krishna Jayaprakash, Christoph Gillum
A Mechanical Regenerative Brake And Launch Assist Using An Open Differential And Elastic Energy Storage, David H. Myszka, Andrew P. Murray, Kevin Giaier, Vijay Krishna Jayaprakash, Christoph Gillum
Andrew P. Murray
Regenerative brake and launch assist (RBLA) systems are used to capture kinetic energy while a vehicle decelerates and subsequently use that stored energy to assist propulsion. Commercially available hybrid vehicles use generators, batteries and motors to electrically implement RBLA systems. Substantial increases in vehicle efficiency have been widely cited. This paper presents the development of a mechanical RBLA that stores energy in an elastic medium. An open differential is coupled with a variable transmission to store and release energy to an axle that principally rotates in a single direction. The concept applies regenerative braking technology to conventional automobiles equipped with …
Estimation Of The Centre Of Mass From Motion Capture And Force Plate Recordings: A Study On The Elderly, Sebastien Cotton, Michele Vanoncini, Philippe Fraisse, Nacim Ramdani, Emel Demircan, Andrew P. Murray, Thierry Keller
Estimation Of The Centre Of Mass From Motion Capture And Force Plate Recordings: A Study On The Elderly, Sebastien Cotton, Michele Vanoncini, Philippe Fraisse, Nacim Ramdani, Emel Demircan, Andrew P. Murray, Thierry Keller
Andrew P. Murray
The estimation of the centre of mass position in humans is usually based on biomechanical models developed from anthropometric tables. This method can potentially introduce errors in studies involving elderly people, since the ageing process is typically associated with a modification of the distribution of the body mass. In this paper, an alternative technique is proposed, and evaluated with an experimental study on 9 elderly volunteers. The technique is based on a virtual chain, identified from experimental data and locating the subject's centre of mass. Its configuration defines the location of the centre of mass, and is a function of …
Development Of A Spring-Based Automotive Starter, David H. Myszka, Jonathan Lauden, Patrick Joyce, Andrew P. Murray, Christoph Gillum
Development Of A Spring-Based Automotive Starter, David H. Myszka, Jonathan Lauden, Patrick Joyce, Andrew P. Murray, Christoph Gillum
Andrew P. Murray
Automotive starting systems require substantial amounts of mechanical energy in a short period of time. Lead-acid batteries have historically provided that energy through a starter motor. Springs have been identified as an alternative energy storage medium and are well suited to engine-starting applications due to their ability to rapidly deliver substantial mechanical power and their long service life. This paper presents the development of a conceptual, spring-based starter. The focus of the study was to determine whether a spring of acceptable size could provide the required torque and rotational speed to start an automotive engine. Engine testing was performed on …