Engineering Commons^™

Study Of The Influence Of B2o3 Oxide On The Physical And Technical Properties Of Ground Enamel Obtained Based On Local Raw Material Components, Shoxrux B. Naimov, Mastura Kh. Aripova

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of the study was to obtain ground enamel based on local raw materials and to study the effect of boron oxide. The selection of local raw materials for producing ground enamel showed that the resulting glass compositions are in the SiO₂–Al₂O₃–Na₂O–K₂O–CaO–B₂O₃ system. To adjust the properties, additives of nickel oxide and cobalt oxide were used. The properties of the developed compositions of primer enamels meet the requirements of GOST 24405-80. It has been determined that the addition of boron and an increase in its amount …

Formation Of Luminescent Coatings With The Use Of Low Melting Glass, Eygeniy N. Poddenezhny, Ekaterina E. Trusova, Andrei A. Boiko, Ekaterina R. Kravcova, Olga V. Davydova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the present research is to develop compounds and technologies for applying the luminous vitrocrystalline compounds to smooth and ribbed glass substrates in LED lamp structure with a remote photoconverter that contains oxide low melting glass as the base and nanostructured cerium–doped yttrium–aluminum garnet powder as the luminophore. The luminescent coatings based on nanostructured cerium doped yttrium-aluminum garnet powder and low melting glass of composition BaO-Bi₂O₃-B₂O₃-K₂O-SiO₂ where prepared. YAG:Ce³⁺ powder was synthesized by the method of thermochemical reaction. Silica glass powder was introduced into the composition …

Anomalous Of Resistance And Magnetic Susceptibility At 280-310 K And Ambient Pressure In Bismuth Cuprates Synthesized By Solar Energy, Dilbara Dj. Gulamova, Elyor B. Eshonkulov, Valeriya R. Li, Grigor I. Mamniashvili, Timur I. Gulamov

CHEMISTRY AND CHEMICAL ENGINEERING

In order to obtain the full content of high-temperature superconducting phases using the “Super Fast Alloys Quenching” technology in the Large Solar Furnace (Parkent), precursors of bismuth cuprates of the series Bi_1,7Pb_0,3Sr₂Ca_(n-1)Cu_nO_y, n=3-30 were synthesized. Methods for study the properties of precursors are presented. The oriented nano-sized microstructure and layered structure of nanocrystalline nuclei are shown. The phase composition of the precursors at the beginning of the series (n=3-5) is represented by X-ray amorphous and crystalline phases. An increase in the content of CaO and CuO destabilizes the …

Waste Utilization In Korean Cement Plants, Geun-Seong Lee, Zebo Abdullaevna Babakhanova, Mastura Khikmatovna Aripova

CHEMISTRY AND CHEMICAL ENGINEERING

The kiln process in cement plant has the advantage of completely and effectively destroying and burning all organic substances due to high temperature and long residence time, oxygen atmosphere and excellent mixing effect, alkaline conditions of raw materials, and incorporation of trace metals into clinker, and plays a role as a pollutant emission barrier during waste utilization. Waste utilization technology is now proven and successful in cement plants. The waste utilization in Korean cement plants are greatly expanding in the view of energy and material recoveries, and economics as well as environmental preservation. Research on waste utilization in the Korean …

Study Of Reactive Distillation Equipment For Eterification Process, Abbos Elmanov, Abdulaziz Bakhtiyorov, Adham Norkobilov, Olimjon Maksudov, Zarif Oripov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to study the chemical technological processes for eterification processes, and the reactive distillation unit, which carries out the reaction and separation process in one device, was chosen as the object of research. А reаctive distillаtion system is exаmined to produce for the production of Ethyl Acetate (EtAc) viа eterificаtion of acetic acid (HAc) with ethаnol. Optimizаtion methods using sensitivity analysis аre аlso conducted. Cаlculаtion of vаpor liquid equilibrium of the mixture system is done using UNIFАC model. Heat integration from the distillate stream of the column to the acid feed stream and from bottom …

Numerical Calculation Of The Flame Spreading Over A Methane Hydrate Surface, Otabek Nigmatov, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The Methane Hydrate is expected as an energy source and is being as a medium distance transport means of natural gas alternative of LNG (Liquefied Natural Gas). During the natural gas transportation, fire accidents are concerned. In the present study, the flame spreading over a methane hydrate surface has been studied numerically as a function of hydrate surface temperature, T_s. When T_s = 173 K (-100℃), lower than the dissociation temperature (T_d = 183 K (-90℃)), the flame spreading speed is around 6.5 mm/s, while the flame spreading speed at T_s = 193 K (-80℃), …

Dft Study Of Quantum Chemical Parameters Of 4-Amino-2-Mercaptobenzimidazole And Their Tautomeric Forms, Dilnoza Rahmonova, Alisher Eshimbetov, Lobar Gapurova, Zuhra Ch. Kadirova, Shakhnoza Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

Coordination competing donor centers, electronic and geometric structures of the 4-amino-2-mercaptobenzimidazole ligand molecule were studied using quantum chemical calculation by the DFT / 6-31G method (d, p). It was shown that during the formation of the metal complex, the ligand is coordinated through the localized nitrogen atom of the imidazole ring. In this study, the total energies (Etot) of 4-amino-2-mercaptobenzimidazole (1) and its tautomeric forms (2 and 3) were calculated. And also, the energies of boundary molecular orbitals, the energy gap between boundary MOs (ΔE) and the distribution of the total charge on atoms and boundary orbitals were determined. In …

The Effect Of Hydrogen Peroxide And Potassium Amylxanthate On The Surface Properties Of Chalcocite And Enargite, Berdakh T. Daniyarov, Hajime Miki, Daminbek A. Ziyatov, Shahlo Daminova

CHEMISTRY AND CHEMICAL ENGINEERING

The effect on the surface properties and floatability of chalcocite and enargite after oxidative treatment with hydrogen peroxide (H₂O₂) in the presence and absence of potassium amylxanthate (PAX) as a collector was studied. In this research, flotation tests were carried out on mixed and individual minerals. Oxidative treatment with hydrogen peroxide had a negative effect on the floatability of chalcocite and enargite. PAX adsorption analysis shows that enargite adsorbs PAX faster than chalcocite. Moreover, Fourier transform infrared spectroscopy analysis shows that PAX was adsorbed in the form of copper amylxanthate on chalcocite and enargite surfaces. In …

Influence Of The Amount Of Monoethanolamine On The Physicochemical Properties Of Aminolysis Products, Soxibjon A. Egamberdiyev, Muzaffar G. Alimukhamedov, Juraev Asror, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this paper is to investigate the process of aminolysis of secondary polyethylene terephthalate with monoethanolamine at low ratio. The effect of the amount of monoethanolamine on the physical and chemical properties of the aminolysis product of secondary polyethylene terephthalate was studied. With an increase of 1-4 moles of monoethanolamine obtained for synthesis (without the presence of a catalyst), it was observed that the number of amines in the aminolysis product increased from 324 to 503 mgKON/g, and the number of hydroxyls increased from 298 to 491 mgKON/g. The structure of the resulting bis(2-hydroxyethylene)terephthalamide was studied using IR …

Study Of The Structure Of Glass Ionomer Cements Developed Based On Glass System Sio2-Al2o3-Cao-Zno-P2o5-Caf2, Tatyana O. Nam, Mastura X. Aripova, Ripsime V. Mkrtchyan

CHEMISTRY AND CHEMICAL ENGINEERING

The goal was to study the structure of glass ionomer cements (GIC) developed on the basis of glasses of the SiO₂-Al₂O₃-CaO-ZnO-P₂O5-CaF₂ system. Glass powders with sizes less than 50 μm were sealed with a 40% solution of polyacrylic acid and after 72 hours, electron microscopic examination was carried out on a JSM-IT200 scanning microscope (JEOL, Japan). All samples demonstrate a cellular structure consisting of glass particles surrounded by glass elements that have entered into an acid-ion interaction with polyacrylic acid in a polymer matrix. GIC-4 and GIC-6 show the most …

Impact Of Sulfurization On Sputtered Bivo4 Thin Films, Shukur P. Gofurov, Dilbar T. Bozorova, Zuhra Ch, Kadirova, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The sulfurization method has been used to decrease the band gap of the BiVO₄ structure, reduce the recombination of electrons and holes, and increase the photoelectrochemical performance of this material. It has been observed that incorporation of sulfur into stoichiometric and V_rich BiVO₄ is variously affected changing of properties of the structure. Sulfurization can modify V_rich BiVO₄ structure rather than stoichiometric BiVO₄.

Development Of Clinker And Portland Cement Composition Based On Surkhondaryo Raw Materials, Salohiddin Ramazanov, Abdumalik Nabiyev, Mastura Aripova

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this research work is to develop clinker and Portland cement compositions based on Surkhandarya raw materials for the planned construction of a cement plant, as well as to study their physical and chemical properties. The compositions of clinkers, including limestone, clay from the Yolgizbulok deposit and slag from the Almalyk mining and metallurgical plant, were studied. The optimal clinker composition was selected, on the basis of which Portland cement was obtained. The optimal amount of gypsum addition was determined to achieve a cement stone strength of 43,5 MPa. The developed clinker composition will provide the planned enterprise …

Antibacterial Cerium-Containing Glazes For Ceramic Tiles, Ivan Levitskiy, Mastura Aripova, Mihail Dyadenko, Dar’Ya Kucherova, Artem Golub

CHEMISTRY AND CHEMICAL ENGINEERING

The results of research on the production of semi-fritted cerium-containing glazes used for ceramic tiles are presented.

A multicomponent raw material mixture based on dolomite, cerium dioxide CeO₂, aluminosilicate multicalcium frit and permanent components including feldspar, alumina and clay components (kaolin and refractory clay) is used to produce glazes.

The characteristics of the obtained coatings were studied: appearance, technological and physico-chemical properties, including antibacterial properties in relation to the strains of Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538. The influence of temperature parameters on the formation of glaze coatings, as well as their structure and phase …