Engineering Commons^™

Seeing Red: Characterizing Historic Bricks At Sylvester Manor, Long Island, Ny 1652-1735, Martin John Schmidheiny

Graduate Masters Theses

The goal of this project is to develop a basic material characterization of the bricks excavated at the site of Sylvester Manor on Shelter Island, New York. In the early Manor period of 1650-1690, this early Northern provisioning plantation supplied Barbadian sugar operations and pursued mercantile interests independent of state control. Accounting for the range of production defects and material characteristics of the bricks suggests on-site or local manufacture as a regional ceramic industry developed. Qualitative visual analysis and petrographic thin-sections were used to characterize the internal composition, variation and production evidence in the bricks. Interpreting the results of this …

Production And Applications Of Formaldehyde-Free Phenolic Resins Using 5-Hydroxymethylfurfural Derived From Glucose In-Situ, Yongsheng Zhang

Electronic Thesis and Dissertation Repository

The phenol-formaldehyde (PF) resin manufacturing industry is facing a growing challenge with respect to concerns over human health, due to the use of carcinogenic formaldehyde and sustainability due to the use of petroleum-based phenol in PF resin manufacture. Glucose and its derivative, 5-hydroxymethylfurfural (5-HMF), have proven to be potential substitutes for formaldehyde in the synthesis of phenolic novolac resins.

This thesis investigated a number of glucose and 5-HMF resin systems including the curing of phenol-glucose novolac resin (PG) with a bis-phenol-A type epoxy. The curing process was modeled according to the Sestak-Berggren equation (S, B) using Málek methods. This was …

Characterizing The Mechanical Behavior Of Single And Polycrystalline Silicon Carbide Using Nanoindentation., Amit Datye

Doctoral Dissertations

This research aims at enhancing the fundamental understanding of mechanisms controlling the deformation and fracture of silicon carbide based ceramics (single- and poly-crystal). The role of microstructure and material properties on the energy absorption capability of SiC is studied. This research helps to improve the ability to quantitatively predict the initiation and propagation of fracture and the interaction between fracture and plasticity, which provides a step towards a mechanistic understanding of deformation and failure properties of ceramic single crystals and polycrystals. The validity of the indentation-cracking method for toughness measurement is examined using nanoindentation tests with different indenters (spherical, pyramidal). …

Thermodynamic Modeling Of Uranium And Oxygen Containing Ternary Systems With Gadolinium, Lanthanum, And Thorium, Jacob Wesley Mcmurray

Doctoral Dissertations

The CALPHAD method is used to assess the thermodynamic properties and phase relations in the U-M-O system where M = Gd, La, and Th. A compound energy formalism (CEF) model for fluorite UO_2±x [urania] is extended to represent the complex U_1-yM_yO_2±x [urania solid solution] phases. The lattice stabilities for fictive GdO₂ [gadolinia] and LaO₂ [lanthana] fluorite structure compounds are calculated from density functional theory (DFT) for use in the CEF for U_1-yM_yO_2±x [urania solid solution phase] while U⁶⁺ [uranium 6 plus cation] is introduced into the …

Elucidating Fundamental Mechanisms In Focused Electron- And Ion-Beam Induced Synthesis, Carlos M. Gonzalez

Doctoral Dissertations

A focused electron beam deposition process (FEBID) coupled with in-situ infrared pulsed laser assist (LA-EBID) has been implemented for higher purity tungsten nanowires using W(CO)₆ [tungsten hexacarbonyl] as parent precursor gas. Nanowires made of Co from Co₂(CO)₈ [dicobalt octacarbonyl] and Pt from MeCpPtIVMe₃ [trimethyl methylcyclopentadienyl platinum] have also been realized by using inert focused ion beams of helium and helium and neon, respectively. In all cases, higher electrical conductivities, higher purities and larger grain sizes have been obtained when compared with preceding traditional additive edit techniques. These new approaches will make possible successful nanoscale direct-write …

Influence Of Texture And Grain Size On The Plastic Anisotropy In A Wrought Mg Alloy: Synchrotron X-Ray Diffraction And Visco-Plastic Self-Consistent Modeling, Yi Wang

Doctoral Dissertations

The combined effects of texture and grain size on the yielding and hardening behavior in a hot-rolled AZ31B Mg alloy were studied by using synchrotron x-ray diffraction and visco-plastic self-consistent (VPSC) simulation methods.

First, the influence of texture on Hall-Petch relationships (namely, critical resolved shear stresses and hardening parameters) in a Mg alloy was investigated to establish a constitutive basis for the VPSC simulation.

Then, the changes in dominant deformation mechanisms (basal, prismatic, and pyramidal slip as well as extension twin) and their relative interactions were studied systematically as a function of the initial texture using a VPSC scheme. The …

A Study Of Energy Resolution And Non-Proportionality Of Yalo3:Ce And Gd3ga3al2o12:Ce, Samuel Bradley Donnald

Doctoral Dissertations

For many radiation detection applications, energy resolution is one of the most important detector characteristics. In well designed scintillation detectors, the energy resolution is primarily driven by two main factors - the light output and light yield non-proportionality. A great deal of research has already focused on understanding and improving the light yield of scintillation detectors; however, light yield non-proportionality is less well understood. Until recently, light yield non-proportionality was thought to be an intrinsic scintillator property with very little sample-to-sample variation. In this work, two materials have been investigated that demonstrate a variable light yield non-proportionality. The first material …

Investigation Of Deformation And Failure Mechanisms In Nanoindentation Mechanics, Yuzhi Xia

Doctoral Dissertations

This dissertation further extends nanoindentation to study the initiation of plasticity in single crystals in nanoscale stressed volumes, to the instrumented tests for damage evaluation and monitoring, and to the fundamental issues in deformation and failure mechanisms in relationship to the defect evolutions.

In the first project, model Fe-Cr, Fe-Ni and Fe-Cr-Ni alloys that are the basis of many structural steels were synthesized as single crystals and characterized. The compositions investigated were Fe-15Cr, Fe-30Cr, Fe-30Ni and Fe-15Cr-15Ni (atomic percent). Several key mechanical properties were determined which will be useful in further studies of irradiation/deformation-induced defects. Incipient plasticity and slip characteristics …

Plastic Anisotropy Of Complex Crystals And Hierarchically Structured Alloys Using Micro-Mechanical Computational Analysis, Lin Li

Doctoral Dissertations

The material anisotropy is one of the most important material properties that cannot be disregarded in today’s world of materials designing and manufacturing. As new materials being developed and new material demands are introduced the inevitable focus on anisotropic materials has been brought under the spotlight. In this dissertation, several experimental and simulation project regarding material anisotropic effects on hexagonal close packed crystals such as Silicon Carbide as well and hierarchically structured solid solution ferritic based alloys. The general purpose was to demonstrate the improvement on various intended material properties using finite element method. Since indentation is a widely used …

Single Fiber Mechanical Properties Using Nano-Tensile Testing And Carbon Fiber Structure-Property Relationship, Matthew Erich Kant

Doctoral Dissertations

Single carbon fibers are studied using a nano-tensile testing system. This system has unprecedented load and displacement resolution, nN and nm respectively, and the ability to perform dynamic testing for storage and loss modulus during quasi-static tensile extension. Furthermore, improved fiber mounting and alignment procedures coupled with the precision of the nano-tensile testing system assist in unprecedented resolution in single fiber mechanical testing for axial modulus and strength. Hence, using these unique capabilities, the moduli and their statistical distribution of many high performance carbon fibers are reported here. From this, a simplified single parameter model describing the strain dependent modulus …

Characterization Of The Fine-Scale Weld Deposit Microstructure And Its Influence On The Elevated Temperature Properties Of 2.25cr - 1mo - 0.25v Weldments In Heavy Wall Pressure Vessels, Dewey Joshua Burgess

Doctoral Dissertations

The research herein was conducted to characterize the fine-scale microstructure of 2.25Cr‑1Mo‑0.25V (22V) submerged arc weld deposits and to study the influence of the microstructure on creep behavior and reheat cracking susceptibility. Scanning electron microscopy and transmission electron microscopy examinations concentrated on carbide morphology and evolution as a function of time and temperature, since the majority of properties that are associated with 22V weld deposits are attributable to the carbide type and location throughout the microstructure.

Five distinct carbides were observed in the range of heat treatments studied: MC, M2C, M23C6, M7C3, and M6C. It was shown that each carbide …

Wear Resistant Polydopamine/Ptfe Nanoparticle Composite Coating For Dry Lubrication Applications, Samuel George Beckford

Graduate Theses and Dissertations

This dissertation presents an investigation into the effect of nanoparticle fillers and a polydopamine adhesive primer on the tribological performance of thin PTFE films. The principal objective of this investigation was to reduce wear in PTFE films, an issue which precludes the use of PTFE films in tribological applications requiring high durability. The friction and wear of the composite films were evaluated using a ball-on-flat configuration in linear reciprocating motion. It was found that the use of a polydopamine adhesive primer reduces the wear of PTFE films more than 600 times. X-ray photoelectron spectroscopy (XPS) results show that a tenacious …

Metal Assisted Nanowire Growth For Silicon Nanowire/Amorphous Silicon Composite Solar Cell, Asmaa Ali Sadoon

Graduate Theses and Dissertations

Solar cells are photovoltaic devices that convert the energy of light to electricity by the photovoltaic effect. Crystalline silicon-based solar cells are the most dominant solar cells in the market today due to the high efficiency and relatively low cost. However, the cost of such solar cell is still high due to the large amount of material that is consumed in fabricating such a device. Polycrystalline/amorphous thin films and nanomaterial technologies have emerged to reduce the high cost of c-Si based solar cells and increase the efficiency. In this research, we combined these two technologies to propose and fabricate silicon …

Highly Transparent, Self-Cleaning, And Antireflective Nanoparticle Coatings, Corey Seth Thompson

Graduate Theses and Dissertations

Current solar panel technologies require a sheet of glass to serve as both mechanical support and to protect the cells from the environment. The reflection from the glass sheet can reflect up to 8% of the incident light, reducing the power output of the panel. Antireflective coatings can be used to allow more light to enter the panel to be converted into usable electricity. However, no solid thin film materials exhibit a low enough index of refraction to serve as antireflective coatings for common solar glass. The main goal of this research was to investigate the self-cleaning, antifogging, and antireflective …

Atom-Based Geometrical Fingerprinting Of Conformal Two-Dimensional Materials, Mehrshad Mehboudi

Graduate Theses and Dissertations

The shape of two-dimensional materials plays a significant role on their chemical and physical properties. Two-dimensional materials are basic meshes that are formed by mesh points (vertices) given by atomic positions, and connecting lines (edges) between points given by chemical bonds. Therefore the study of local shape and geometry of two-dimensional materials is a fundamental prerequisite to investigate physical and chemical properties. Hereby the use of discrete geometry to discuss the shape of two-dimensional materials is initiated.

The local geometry of a surface embodied in 3D space is determined using four invariant numbers from the metric and curvature tensors which …

The Structure And Ferroelectric Properties Of Iron-Doped Lead Titanate, Michael Bartlein

Theses and Dissertations

Multiferroics are a class of poorly understood, but technologically important materials. Lead(II) titanate (PbTiO$_3$) is a known perovskite ferroelectric. By doping PbTiO$_3$ with Fe$^{3+}$ at the Ti site, we produce the multiferroic PbTi$_{1-x}$Fe$_x$O$_3$ (PTFO). Using selected area electron diffraction on a transmission electron microscope, the structure of PTFO is investigated. Of particular interest is identifying the cubic-to-tetragonal transition at the Curie temperature. As the concentration of Fe increases, the crystal becomes more cubic and experiences a lower transition temperature. I also establish a procedure for preparing bulk PTFO samples for ferroelectric testing and present preliminary results establishing ferroelectricity in these …

Utilization Of Aqueous Raft Prepared Copolymers To Improve Anticancer Drug Efficacy, Andrew Christopher Holley

Dissertations

The advent of controlled radical polymerization (CRP) techniques, along with advancements in facile conjugation chemistry, now allow synthetic tailoring of precise, polymeric architectures necessary for drug/gene delivery. Reversible addition- fragmentation chain transfer (RAFT) polymerization and its aqueous counterpart (aRAFT) afford quantitative control over key synthetic parameters including block length, microstructure, and placement of structo-pendent and structo-terminal functionality for conjugation of active agents and targeting moieties. The relevance of water-soluble and amphiphilic (co)polymers synthesized by RAFT for in vitro delivery of therapeutics in biological fluids is an especially attractive feature. In many cases, polymerization, binding, conjugation, …

Investigation Of Fatigue Life And Fracture Mechanics Of Unconstrained Ni-Mn-Ga Single Crystals, Theodore Bryson Lawrence

Boise State University Theses and Dissertations

Ni-Mn-Ga is a magnetic shape memory alloy (MSMA) that exhibits large recoverable strains. The magnetic field induced strain (MFIS) occurs through twin boundary motion resulting in reorientation of the crystal structure, which is coupled to the magnetic moment of the material. The shape memory capabilities of the material make it promising for applications including microactuators, sensors, microfluid pumps, refrigeration, energy harvesting, and data storage.

In order for Ni-Mn-Ga to become a viable option for use in commercial applications the performance and reliability must be on par with industry standards. Ni‑Mn-Ga has been shown to achieve high cycles at low strains, …

Fatigue, Fracture, And Environmentally-Assisted Behavior Of Advanced Engineering Materials, Zhi Tang

Doctoral Dissertations

The objective of the present study is to provide a fundamental understanding of fatigue, fracture, and environmentally-assisted behavior of high-entropy alloys (HEAs). The work involves fatigue, fracture, and environmentally-assisted behavior of a new kind of advanced engineering materials, called HEAs. Three tasks are studied: (1) microstructures and fracture mechanisms of HEAs, (2) fatigue failure and life prediction of HEAs, and (3) corrosion and environmentally-assisted behavior of HEAs.

In the first task, microstructural stability and fracture mechanism of the AlCoCrFeNi alloy are studied and compared with thermodynamic calculations. In the second task, high-cycle fatigue-failure mechanisms of the cold-rolled Al0.5CoCrCuFeNi alloy are …

Earth Abundant Thin Film Technology For Next Generation Photovoltaic Modules, Githin Alapatt

All Dissertations

With a cumulative generation capacity of over 100 GW, Photovoltaics (PV) technology is uniquely poised to become increasingly popular in the coming decades. Although, several breakthroughs have propelled PV technology, it accounts for only less than 1% of the energy produced worldwide. This aspect of the PV technology is primarily due to the somewhat high cost per watt, which is dependent on the efficiency of the PV cells as well as the cost of manufacturing and installing them. Currently, the efficiency of the PV conversion process is limited to about 25% for commercial terrestrial cells; improving this efficiency can increase …

Relationship Between Peel Force, Opening Force, And Burst Force For A Semi-Rigid Cup And Lid, Pre- And Post-Retort, Raj Navalakha

All Theses

This research determines if there is any relationship between the peel force, the opening force and the burst force for a semi-rigid cup and lid system, for pre- and post-retort conditions. It also compares the relationship (regression lines) between these forces pre- and post-retort. These seal results were studied by varying the sealing parameters of dwell time and temperature while keeping the pressure constant. Polypropylene cups and a peelable barrier retort lidding were used in this study. As compared to past research, a different peel testing technique was used to measure the peel and the opening force. The entire lid …

Composite Films With Magnetic Nanorods: Fundamentals, Processing And Applications, Yu Gu

All Dissertations

This Dissertation is centered on studying the composite films with magnetic nanorods. In recent years, one-dimensional magnetic nanostructures, such as magnetic nanorods, chains of magnetic nanoparticles, and nanotubes filled with magnetic nanoparticles have caught great attentions due to the breadth of applications. Their unique magnetic and geometrical features open new avenues of studies in medicine, sensors, optofluidics, magnetic swimming, and microrheology. In particular, they offered great opportunities for design of multifunctional devices and for manufacturing of anisotropic nano- and microstructures with unprecedented magnetic and mechanical properties. However, the strategy for nanorod alignment in both Newtonian and complex fluids has not …

Synthesis And Characterization Of Chemically Functionalized Shape Memory Nanofoams For Unattended Sensing Applications, Anna Paola Soliani

All Dissertations

The work in this dissertation is devoted to the synthesis and characterization of novel materials for off-line unattended sensing: shape-memory grafted nanofoams. The fabrication process and characterization of highly efficient, polymeric nanosensor element with the ability to selectively detect analytes and retain memory of specific exposure events is reported. These shape memory nanofoams could potentially act as efficient and highly sensitive coatings for evanescent waveguide-based optical monitoring systems. On exposure to specific analytes, the polymeric coatings locally change their internal structure irreversibly at the nanolevel, affecting the local optical properties such as refractive index. Currently, enrichment polymer layers (EPLs) are …

High Strength Steel Fiber Reinforced Flow-Able Or Scc Concrete With Variable Fiber By Volume Fractions For Thin Plate And Shell Structures, Abebe Berhe

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this study is to incorporate discrete, short, mechanically deformed, small diameter steel fibers into high strength concrete with f'c > 70 MPa (10 ksi) in an attempt to reduce and partially eliminate the need for steel rebar in concrete construction. By introducing steel fibers to high strength concrete mixture, the overall tensile, compressive and shear strength of the mixture can be improved immensely thus, replacing portions or major parts of the longitudinal, temperature and shrinkage reinforcements. The reduction or elimination of longitudinal and transverse reinforcements in the construction of structural or non-structural members can result in savings in …

The Development Of A Laminated Copolyester Electric Guitar, Addison S. Karnes

Electronic Theses and Dissertations

This thesis is an investigation of the fabrication and assembly methodologies employed in the development of a proof-of-principle prototype electric guitar composed of laminated copolyester. The objective of the project was to develop the processes and procedures to create an optimized physical and visual bond between layers to minimize vibratory dissipation, thus maximizing sustain. A high speed CNC router, abrasive waterjet, laser engraver-cutter, as well as various manual fabrication and assembly methods were investigated in the construction of the guitar prototypes. The lamination processes explored include low-temperature, heat-assisted pressure bonding, solvent and chemical welding, and contact adhesives. The project concluded …

Fabrication And Characterization Of Magnetic Nanoparticle Composite Membranes, Akeem Cruickshank

All Theses

To effectively and accurately deliver drugs within the human body, both new designs and components for implantable micropumps are being studied. Designs must ensure high biocompatibility, drug compatibility, accuracy and small power consumption. The focus of this thesis was to fabricate a prototype magnetic nanoparticle membrane for eventual incorporation into a biomedical pump and then determine the relationship between this membrane deflection and applied pneumatic or magnetic force. The magnetic nanoparticle polymer composite (MNPC) membranes in this study were composed of crosslinked polydimethylsiloxane (PDMS) and iron oxide nanoparticles (IONPs). An optimal iron oxide fabrication route was identified and particle size …

Zone Refining Of Raw Materials For Metal Halide Scintillator Crystal Growth, Thomas Williams Mcalexander

Masters Theses

In recent years, scintillators have been researched for homeland security applications where properties such as high light output and low energy resolution are required for efficient gamma ray spectroscopy. Several promising scintillators, including SrI₂ [Strontium Iodide], CsSrI₃ [Cesium Strontium Iodide]_, and KSr₂I₅ [Potassium Strontium Iodide] are activated with EuI₂ [Europium Iodide]. The quality of EuI₂ raw material is generally poor and inconsistent as-received from the manufacturer. Material purity is known to affect its scintillation performance, and so purification processes have been investigated to improve the performance of Eu-doped [Europium-doped] scintillators. In this …

Printing Functional Electronic Circuits And Components, Ahmed Tausif Aijazi

Dissertations

The purpose of this study was to investigate the challenges in printing reliable multilayer flexible circuits, devices and components. Gravure was used as the primary printing process for this work, but due to some limitations of gravure, other printing methods were also investigated. At first a systematic study was done to determine the optimum parameters for the gravure printing of sub 50 micron lines. Commercially available silver nanoparticle inks were printed on a lab scale gravure printer, Accupress®. The highest resolution line that was electrically conductive was 36μm wide. The 9μm, 18μm and 27μm lines were printed but were not …

Early-Age Hydration Studies Of Portland Cement, Fengjuan Liu

Electronic Theses and Dissertations

Our current knowledge on cement hydration during setting is based on the discrete observation of hydrated paste. An advanced micro/nano-level technique which can perform the in-situ observation on the continuous hydration of cement paste is demanded. In this study, Raman spectroscopy (RS) was chosen as such a method to continuously investigate wet pastes. The objective of this research is to explore the hydration process and microstructural development of fresh pastes with this technique. This research was conducted in three phases. First, the RS analysis was used to continuously observe the cement hydration from 20 minutes after mixing to 9 hours. …

Reverse Engineering Of Reciprocating Saw, Nicholas Alexander Cavopol, Candice Kinsler, Carly Jania, Joseph Richard Creekmore

Chancellor’s Honors Program Projects

No abstract provided.