Open Access. Powered by Scholars. Published by Universities.®
- Keyword
Articles 1 - 8 of 8
Full-Text Articles in Engineering
Assessing Magnetic Iron Oxide Nanoparticles Properties Under Different Thermal Treatments, Erick S. Vasquez, Evan M. Prehn, Keisha B. Walters
Assessing Magnetic Iron Oxide Nanoparticles Properties Under Different Thermal Treatments, Erick S. Vasquez, Evan M. Prehn, Keisha B. Walters
Chemical and Materials Engineering Faculty Publications
Magnetic nanoparticle structures have been examined as potential carrier vehicles and substrates in a wide range of applications where they undergo mechanical, chemical and/or thermal manipulation to allow for their modification, conjugation and transport. For safe and effective use, it is imperative to not only measure the initial physicochemical and structural properties of nanomaterials, but also identify and quantify any property changes related to a loss of chemical and/or physical integrity during processing and usage conditions. In this study an assessment of iron oxide magnetic nanoparticle thermal stability using modulated differential scanning calorimetry (mDSC) and a controlled-heating system is conducted …
Optothermal Microbubble Assisted Manufacturing Of Nanogap-Rich Structures For Active Chemical Sensing, Farzia Karim, Erick S. Vasquez, Yvonne Sun, Chenglong Zhao
Optothermal Microbubble Assisted Manufacturing Of Nanogap-Rich Structures For Active Chemical Sensing, Farzia Karim, Erick S. Vasquez, Yvonne Sun, Chenglong Zhao
Chemical and Materials Engineering Faculty Publications
Guiding analytes to the sensing area is an indispensable step in a sensing system. Most of the sensing systems apply a passive sensing method, which waits for the analytes to diffuse towards the sensor. However, passive sensing methods limit the detection of analytes to a picomolar range on micro/nanosensors for a practical time scale. Therefore, active sensing methods need to be used to improve the detection limit in which the analytes are forced to concentrate on the sensors. In this article, we have demonstrated the manufacturing of nanogap-rich structures for active chemical sensing. Nanogap-rich structures are manufactured from metallic nanoparticles …
Optimization And Structural Stability Of Gold Nanoparticle–Antibody Bioconjugates, Robert T. Busch, Farzia Karim, John Weis, Yvonne Sun, Chenglong Zhao
Optimization And Structural Stability Of Gold Nanoparticle–Antibody Bioconjugates, Robert T. Busch, Farzia Karim, John Weis, Yvonne Sun, Chenglong Zhao
Chemical and Materials Engineering Faculty Publications
Gold nanoparticles (AuNPs) bound with biomolecules have emerged as suitable biosensors exploiting unique surface chemistries and optical properties. Many efforts have focused on antibody bioconjugation to AuNPs resulting in a sensitive bioconjugate to detect specific types of bacteria. Unfortunately, bacteria thrive under various harsh environments, and an understanding of bioconjugate stability is needed. Here, we show a method for optimizing Listeria monocytogenes polyclonal antibodies bioconjugation mechanisms to AuNPs via covalent binding at different pH values, from 2 to 11, and 2-(N-morpholino)ethanesulfonic acid (MES), 3-(N-morpholino)propanesulfonic acid, NaOH, HCl conditions. By fitting Lorentz curves to the amide I and II regions, we …
Computational And Experimental Approach To Understanding The Structural Interplay Of Self-Assembled End-Terminated Alkanethiolates On Gold Surfaces, Juganta K. Roy, Erick S. Vasquez, Henry P. Pinto, Swati Kumari, Keisha B. Walters, Jerzy Leszcynski
Computational And Experimental Approach To Understanding The Structural Interplay Of Self-Assembled End-Terminated Alkanethiolates On Gold Surfaces, Juganta K. Roy, Erick S. Vasquez, Henry P. Pinto, Swati Kumari, Keisha B. Walters, Jerzy Leszcynski
Chemical and Materials Engineering Faculty Publications
Applications of self-assembled monolayers (SAMs) on surfaces are prevalent in modern technologies and drives the need for a better understanding of the surface domain architecture of SAMs. To explore structural interaction at the interface between gold surfaces and a hydroxyl-terminated alkanethiol, 11-hydroxy-1-undecanethiol, (C11TH) we have employed a combined computational and experimental approach. Density functional theory (DFT) calculations were carried out on the thiol–gold interface using both the Perdew–Burke–Ernzerhof (PBE) and van der Waals (optB86b) density functionals. Our ab initio molecular dynamics (AIMD) simulations revealed that the interface consists of four different distinguished phases, each with different C11TH orientations. Experiments involved …
Development Of A Methodology For Characterizing Reaction Kinetics, Rheology, And In-Situ Compaction Of Polyimide Prepregs During Cure, James Raymond Magato, Donald A. Klosterman
Development Of A Methodology For Characterizing Reaction Kinetics, Rheology, And In-Situ Compaction Of Polyimide Prepregs During Cure, James Raymond Magato, Donald A. Klosterman
Chemical and Materials Engineering Faculty Publications
PMR-type polyimide prepregs are challenging to fabricate into high quality composites due to volatiles that are generated and must be removed in situ during processing. The current work was conducted to develop accurate, reliable, and practical characterization techniques of the prepreg rheology, volatile generation, and subsequent volatile removal from the prepreg during composite fabrication. Thermal analysis was used to characterize volatile generation, reaction rates, and rheology. A novel approach was used to measure the thickness of the prepreg in situ during vacuum bag/oven processing using a high-temperature LVDT. Experimental results are presented for the commercially available RM-1100 polyimide/carbon prepreg system, …
The Effect Of Fabric Architecture On The Processing And Properties Of Composites Made By Vacuum Assisted Resin Transfer Molding, Francois Ntakobatagize, Oscar Ntakontagize, Donald A. Klosterman
The Effect Of Fabric Architecture On The Processing And Properties Of Composites Made By Vacuum Assisted Resin Transfer Molding, Francois Ntakobatagize, Oscar Ntakontagize, Donald A. Klosterman
Chemical and Materials Engineering Faculty Publications
The goal of this research project was to evaluate and compare the effect of fabric architecture on the processing and properties of composites made by Vacuum Assisted Resin Transfer Molding (VARTM). The fabric architectures investigated included plain weave, satin weave, and warp-knit unidirectional. The fiber types included E-glass and standard modulus carbon fiber. Flat panels were fabricated with a lab scale VARTM process using an epoxy resin system. Fabric plies were cut to 45 cm x 30 cm (18 in. x 12 in.), and the number of plies used depended on the fiber areal weight of each fabric to produce …
Generation Of Silver Nanoparticle Pharmacokinetic Profiles In A Lung Model, Rachel Galaska
Generation Of Silver Nanoparticle Pharmacokinetic Profiles In A Lung Model, Rachel Galaska
Honors Theses
Nanomaterial technologies are becoming increasingly prevalent in consumer and industrial applications, including drug delivery, energy harvesting, environmental applications, and medicine due to their unique physiochemical properties. As nanomaterial use increases, so too does human exposure. This has made it progressively more important to understand the toxicological effects of nanomaterials and their interactions with the human body. Silver nanoparticles (AgNPs) are one of the most commonly used nanomaterials due to their antibacterial properties. As inhalation is one of the most common exposure routes, understanding the toxicity of these AgNPs on lung tissue was studied. Using A549 cells for a lung tissue …
Effect Of Activated Carbon On The Performance Of A Solar Thermal Adsorptive Refrigerator (Star) Using Activated Carbon-Ethanol, Joshua Romo
Honors Theses
The Solar Thermal Adsorptive Refrigerator (STAR) project at the University of Dayton seeks to bridge sustainability and the need for reliable refrigeration in developing communities. Cost-effective construction, operation, and maintenance as well as the use of a sustainable adsorption pair, activated carbon-ethanol, give STAR great potential in the realm of humanitarian engineering. This project explores the effect of using two activated carbon brands, 8x16 and CocoPlus, on the cyclic performance of the STAR system. Although both brands have similar specifications given by the manufacturer, one (8x16) inhibited successful performance while the other (CocoPlus) enabled it. This project highlights both the …