Engineering Commons^™

Development Of Zeolitic Imidazolate Frameworks For Enhancing Post-Combustion Co2 Capture, Dustin Lee

Master's Theses

Post-combustion CO₂ capture is a promising approach for complementing other strategies to mitigate climate change. Liquid absorption is currently used to capture CO₂ from post-combustion flue gases. However, the high energy cost required to regenerate the liquid absorbents is a major drawback for this process. As a result, solid sorbents have been investigated extensively in recent years as alternative media to capture CO₂ from flue gases. For example, metal organic frameworks (MOFs) are nanoporous materials that have high surface areas, large pore volumes, and flexible designs. A large number of MOFs, however, suffer from 1) low CO …

Formula Sae Monocoque Chassis Development, Kc Egger, Brian Ford, Kyle Nagao, Neal Sharma, Donovan Zusalim

Mechanical Engineering

Formula SAE is a collegiate competition hosted by SAE International with the primary goal being to design, manufacture, and race an open wheel race car. The Cal Poly Racing Formula SAE team strives for improvement every race season and has remained competitive as a result. The 2019-2020 management team determined that further research and development towards the chassis would yield the greatest performance benefit for future seasons, as the previous chassis platform limited packaging and mounting options for vehicle subsystems which interfaced with the chassis.

A redesign of the Cal Poly Racing Formula SAE team’s carbon fiber reinforced polymer monocoque …

Maleic Anhydride Compatibilized Peach Waste As Filler In Polypropylene And High Density Polyethylene Biocomposites, Caralyn Wong, Stephanie Jung, Joongmin Shin, Ajay Kathuria

Master's Theses

It is estimated that roughly 103, 515 tons of peach waste is produced annually in the US. The majority of the waste is disposed of in landfills, which contributes to climate change as they release 93 million metric tons of CO₂ equivalent. Peach waste principally consists of remaining stone and seed after flesh removal. The agro-waste includes both cellulose and lignin, which can be utilized as a filler in plastic packaging to reduce carbon footprints and material cost. The objectives of this research are (1) to develop peach flour (PF)-filled biocomposites with a polyolefin matrix using maleic anhydride-g-high density …

Non-Toxic Soil Thickeners For Reducing Mudslide Intensity, Mitchell William Jensen

Materials Engineering

This project was intended to be a continuation of senior project work done last year by a group consisting of two Materials Engineering students and a Soil Science student. Their report was crucial in identifying a range of food thickeners that could be capable of performing in the mud thickening application. All thickeners that were chosen both this year and last year are biocompatible, to alleviate some toxicity concerns. The food thickeners all belong to a class of compounds known as colloids. Since water is the fluid being thickened, these compounds are more accurately referred to as hydrocolloids. Hydrocolloids are …

The Effect Of Distal Core Flattening And Heat Treatment On 304 Stainless Steel Guide Wires, Andrew Spencer Yap, Bryce Eric Veit, Matthew Frederick Lopez Villena

Materials Engineering

The mechanical response of 304 stainless steel guide wires due to different temper conditions and amounts of flattening is to be explored in this project. For this specific project, there is no public literature on the mechanical properties of guide wires with the above conditions through tensile testing or Turns to Failure Testing. To address this, the project with Abbott Vascular will measure the mechanical properties of guide wires using the aforementioned factors. Due to a lack of previous literature on this research topic, there are no quantitative goals for the project, however, any new research compiled in this area …

Microstructure And Tensile Properties Of Close-Die Forged Ti-6al-4v Aircraft Engine Mount, Renee Roeder, Nick Chen, Michael Viksne

Materials Engineering

The microstructural characteristics of a Ti-6Al-4V close-die forging that passes yield strength specifications are examined and found to be consistent with literature recommendations. Originally, the intent was to compare the microstructure of a forging that passed specification to the microstructure of a forging that did not pass specifications using the imaging software ImageJ. Due to time and safety constraints considering the COVID-19 pandemic, the data that is presented is incomplete data on only the forging that passes specifications. There are no comparisons between the forging that did not pass and the forging that passed.

Study Of Permeability Testing Methods For Composite Laminates, Thomas S. Busse, Giannina Marie M. Yu

Materials Engineering

Permeability measurements are strong indicators of the effectiveness of evacuation channels within a composite prepreg. The effectiveness of these evacuation channels directly relates to the void content within a processed composite laminate. The goal of Toray Advanced Composites was to compare two permeability tests and determine which one was more reliable, accurate, and economical. The first permeability test method was the Cirrus method, designed by Cirrus Aircraft, a customer of Toray Advanced Composites. The second test was ASTM D8132, the standard method for permeability testing. Additionally, Toray sought to investigate the effect out-time had on the permeability of three different …

Investigation Of Ceramic Firing Processes For Investment Casting Shell Molds, Leonardo Ken Hoaakua Nakamura, Rileigh Anne Cotter

Materials Engineering

PCC Structurals aims to improve the quality and consistency of their ceramic mold production for their investment casting processes to decrease product loss figures. Although their current production processes result in acceptable quantities of high-quality molds, a significant percentage of defective molds are produced. These defective molds cause appreciable product loss due to casting defects and mold failure. Available literature dictates that high-quality investment casting molds must exhibit fracture strengths within a desired range in order to perform adequately. However, information regarding specific firing procedures which consistently result in ceramic mold strengths within this range is not readily available. To …

Effects Of Surface Finish On High Cycle Fatigue Of Inconel 718, Jessica A. Mcroskey, Matthew Busse

Materials Engineering

Inconel 718 is a nickel-based superalloy and commonly used rocket engine material due to its excellent properties at elevated temperatures. Its fatigue life relies heavily on the surface roughness, as fatigue introduces and propagates cracks at the surface. Part standards set by Aerojet Rocketdyne typically necessitate surface roughness values from 64 to 125 Ra. However, surface topography and residual stresses incurred from the finishing process also affect the fatigue performance. The specific goal of the project is to perform a literature review and write experimental methods to determine how the surface roughness, topography, and residual stresses from turning, grit blasting, …

Design For Additive Manufacturing, Michael Charonnat, Leonardo Franco-Muñoz, Sam Noble, J.P. Purdom

Mechanical Engineering

This document outlines the critical design details and timeline for the Design for Additive Manufacturing Senior Project sponsored by Solar Turbines, Inc. The scope of this project encompasses the redesign of two of Solar Turbine’s cast parts for metal additive manufacturing in order to minimize lead time, cost, and weight. With the overall objective of performing in-depth analysis exploring affordability & feasibility, this redesign process will aid Solar Turbines in expanding their knowledge of Design for Additive Manufacturing principles and enable them to further incorporate the use of additive manufacturing into their production processes. The first part that the team …

Analysis Of Burning Wood In The Transient State And The Application To Structural Design, Roberta Veliz, Kimberly Guzman

Architectural Engineering

Determining the extent of the contribution of exposed timber on compartment fire dynamics in open floor plans is a complex process. Designers traditionally used compartmentalization design methods which create spaces where flashover is likely, given the fuel load and ventilation conditions. However, due to the large geometric dimensions and spread of fuel, fires in open floor plans are more likely to remain as localized or traveling fires. As such, an understanding of not only ignition potential but also flame spread is critical to characterizing the contribution of exposed timber. An integral step in characterizing the potential contribution is through an …

Optimization And Longevity Of Functionalized Multi-Walled Carbon Nanotube-Enabled Membranes For Water Treatment, Madeleine Michael Isabella White

Master's Theses

Water scarcity is a growing concern at the global scale. Large scale water reuse is growing both in necessity and popularity. Before water reuse can be performed efficiently on a large scale or be used for potable supply, even indirectly, contaminants of emerging concern (CECs) will need to be treated at the full scale. Advanced oxidation processes (AOPs) are a form of advanced water treatment capable of treating a wide range of CECs. This study contributes to the growing field of AOPs and more specifically AOPs using ozone combined with functionalized multi-walled carbon nanotubes (MWCNTs). Ozonation of MWCNTs has been …

Miniaturized Ultraviolet Imager Phase Iii, Bradley D. Albright, Nicolas A. Armenta, Colin W. Harrop

Mechanical Engineering

This document details the work to date, June 9, 2020, done by the Cal Poly Mechanical Engineering senior project team, Miniaturized Ultraviolet Imager: Phase III (MUVI III), sponsored by the University of California, Berkeley – Space Sciences Laboratory (UCB SSL). MUVI III is the third senior project team of an ongoing design, MUVI: the prototype of a 2U sized CubeSat intended to capture aurora images in the ionosphere. The first team, MUVI I, finished development of the UV imager. The second team, MUVI II, designed the mirror mounting and deployable door mechanisms. The goal of MUVI phase III is to …