Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Additive manufacturing (2)
- Interferometer (2)
- Pressure sensor (2)
- Acoustic devices--Design (1)
- Adiabatic shear band (1)
-
- Atomic force microscopy (1)
- Barium gallium selenide (1)
- Bismuth (1)
- Carbon fiber (1)
- Ceramic manufacturing (1)
- Ceramic matrix composites (1)
- Ceramic turbine rotor (1)
- Charge compensation (1)
- Coherent sources (Optics) (1)
- Crystal structure (1)
- Discrete energy levels (1)
- Dynamic shear localization (1)
- Electron paramagnetic resonance (1)
- Fatigue (Mechanics) (1)
- Film cooling (1)
- Gallium Arsenide Phosphide Ternary Compounds (1)
- Gas turbine engines (1)
- LBO crystals (1)
- Laser powder bed fusion (1)
- Lasers (1)
- Light guides (1)
- Maker Fringe experiment (1)
- Materials analysis (1)
- Metamaterials (1)
- Microhardness testing (1)
- Publication Type
Articles 1 - 17 of 17
Full-Text Articles in Engineering
Transition-Metal Ions In Β-Ga2O3 Crystals: Identification Of Ni Acceptors, Timothy D. Gustafson, Nancy C. Giles, Brian C. Holloway, J. Jesenovec, B. L. Dutton, M. D. Mccluskey, Larry E. Halliburton
Transition-Metal Ions In Β-Ga2O3 Crystals: Identification Of Ni Acceptors, Timothy D. Gustafson, Nancy C. Giles, Brian C. Holloway, J. Jesenovec, B. L. Dutton, M. D. Mccluskey, Larry E. Halliburton
Faculty Publications
Excerpt: Transition-metal ions (Ni, Cu, and Zn) in β-Ga2O3 crystals form deep acceptor levels in the lower half of the bandgap. In the present study, we characterize the Ni acceptors in a Czochralski-grown crystal and find that their (0/−) level is approximately 1.40 eV above the maximum of the valence band.
Adiabatic Shear Banding In Nickel And Nickel-Based Superalloys: A Review, Russell A. Rowe, Paul G. Allison, Anthony N. Palazotto, Keivan Davami
Adiabatic Shear Banding In Nickel And Nickel-Based Superalloys: A Review, Russell A. Rowe, Paul G. Allison, Anthony N. Palazotto, Keivan Davami
Faculty Publications
This review paper discusses the formation and propagation of adiabatic shear bands in nickel-based superalloys. The formation of adiabatic shear bands (ASBs) is a unique dynamic phenomenon that typically precedes catastrophic, unpredicted failure in many metals under impact or ballistic loading. ASBs are thin regions that undergo substantial plastic shear strain and material softening due to the thermo-mechanical instability induced by the competitive work hardening and thermal softening processes. Dynamic recrystallization of the material’s microstructure in the shear region can occur and encourages shear localization and the formation of ASBs. Phase transformations are also often seen in ASBs of ferrous …
Optimizing Switching Of Non-Linear Properties With Hyperbolic Metamaterials, James A. Ethridge, John G. Jones, Manuel R. Ferdinandus, Michael J. Havrilla, Michael A. Marciniak
Optimizing Switching Of Non-Linear Properties With Hyperbolic Metamaterials, James A. Ethridge, John G. Jones, Manuel R. Ferdinandus, Michael J. Havrilla, Michael A. Marciniak
Faculty Publications
Hyperbolic metamaterials have been demonstrated to have special potential in their linear response, but the extent of their non-linear response has not been extensively modeled or measured. In this work, novel non-linear behavior of an ITO/SiO2 layered hyperbolic metamaterial is modeled and experimentally confirmed, specifically a change in the sign of the non-linear absorption with intensity. This behavior is tunable and can be achieved with a simple one-dimensional layered design. Fabrication was performed with physical vapor deposition, and measurements were conducted using the Z-scan technique. Potential applications include tunable optical switches, optical limiters, and tunable components of laser sources.
Oxygen Vacancies In Lib3O5 Crystals And Their Role In Nonlinear Absorption, Brian C. Holloway, Christopher A. Lenyk, Timothy D. Gustafson, Nancy C. Giles
Oxygen Vacancies In Lib3O5 Crystals And Their Role In Nonlinear Absorption, Brian C. Holloway, Christopher A. Lenyk, Timothy D. Gustafson, Nancy C. Giles
Faculty Publications
LiB3O5 (LBO) crystals are used to generate the second, third, and fourth harmonics of near-infrared solid-state lasers. At high power levels, the material’s performance is adversely affected by nonlinear absorption. We show that as-grown crystals contain oxygen and lithium vacancies. Transient absorption bands are formed when these intrinsic defects serve as traps for “free” electrons and holes created by x rays or by three- and four-photon absorption processes. Trapped electrons introduce a band near 300 nm and trapped holes produce bands in the 500-600 nm region. Electron paramagnetic resonance (EPR) is used to identify and characterize the …
Mechanical Properties And Tension-Tension Fatigue Behavior Of A Novel Additively Manufactured Polymer Matrix Composite At Room And Elevated Temperature, Grayson M. Harber
Mechanical Properties And Tension-Tension Fatigue Behavior Of A Novel Additively Manufactured Polymer Matrix Composite At Room And Elevated Temperature, Grayson M. Harber
Theses and Dissertations
The tension-tension fatigue behavior of a novel additively manufactured AM carbon fiber reinforced polymer matrix composite was studied. This novel material system consists of T1100 carbon fibers, and a UV photocured resin developed by Continuous Composites and Sartomer. Tensile properties and tension-tension fatigue were investigated for the 090 fiber orientation as well as for the ±45 fiber orientation. Specimens with 0/90 fiber orientation were tested at ambient laboratory temperature 23 °C and at elevated temperature 150 °C, while the specimens with the ±45 fiber orientation were tested only at ambient laboratory temperature. Tension-tension fatigue testing was carried out with a …
Noncontact Liquid Crystalline Broadband Optoacoustic Sensors, Hengky Chandrahalim, Michael T. Dela Cruz
Noncontact Liquid Crystalline Broadband Optoacoustic Sensors, Hengky Chandrahalim, Michael T. Dela Cruz
AFIT Patents
An optoacoustic sensor includes a liquid crystal (LC) cell formed between top and bottom plates of transparent material. A transverse grating formed across the LC cell that forms an optical transmission bandgap. A CL is aligned to form a spring-like, tunable Bragg grating that is naturally responsive to external agitations providing a spectral transition regime, or edge, in the optical transmission bandgap of the transverse grating that respond to broadband acoustic waves. The optoacoustic sensor includes a narrowband light source that is oriented to transmit light through the top plate, the LC cell, and the bottom plate. The optoacoustic sensor …
Influence Of Materials And Design Parameters On Zinc Oxide Surface Acoustic Devices, Samuel B. Dewhitt
Influence Of Materials And Design Parameters On Zinc Oxide Surface Acoustic Devices, Samuel B. Dewhitt
Theses and Dissertations
This thesis presents research into Zinc Oxide (ZnO) based resonators to include Width Extensional Mode (WEM), Length Extensional Mode (LEM), and Surface Acoustic Wave (SAW) devices. The design and operation of ZnO based SAW devices are investigated further to characterize design parameters and operating modes. Their design, fabrication, and results are discussed in detail. SAW device testing in conjunction with X-Ray Diffractometry (XRD) and Atomic Force Microscopy (AFM) are utilized to characterize ZnO and its deposition parameters on a variety of different substrates and interlayers, with different deposition temperatures and annealing parameters. These substrates include silicon, silicon oxide-on-silicon, and sapphire …
Identification And Characterization Of Point Defects In Nonlinear Optical Crystals: Barium Gallium Selenide And Lithium Triborate, Brian C. Holloway
Identification And Characterization Of Point Defects In Nonlinear Optical Crystals: Barium Gallium Selenide And Lithium Triborate, Brian C. Holloway
Theses and Dissertations
Increased interest in developing new nonlinear optical materials has led to 3rd generation materials, such as BaGa4Se7 and LiB3O5. These two nonlinear optical crystals have the potential to enable development of tunable lasers operating across the mid-wave infrared and the ultraviolet regions, respectively. Coherent light sources are used in the development of enhanced technologies with commercial and defense-based applications such as: health and environmental monitoring devices, next-generation infrared countermeasures, and ballistic missile booster exhaust plume characterization. The performance of optical materials in high-powered military applications is largely limited by the presence of defects. These defects …
Monolithically Integrated Microscale Pressure Sensor On An Optical Fiber Tip, Jeremiah C. Williams, Hengky Chandrahalim
Monolithically Integrated Microscale Pressure Sensor On An Optical Fiber Tip, Jeremiah C. Williams, Hengky Chandrahalim
AFIT Patents
A passive microscopic Fabry-Pérot Interferometer (FPI) pressure sensor includes an optical fiber and a three-dimensional microscopic optical enclosure. The three-dimensional microscopic optical enclosure includes tubular side walls having lateral pleated corrugations and attached to a cleaved tip of the optical fiber to receive a light signal. An optically reflecting end wall is distally engaged to the tubular side walls to enclose a trapped quantity of gas that longitudinally positions the optically reflecting end wall in relation to ambient air pressure, changing a distance traveled by a light signal reflected back through the optical fiber.
Hinged Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Jeremiah C. Williams, Hengky Chandrahalim
Hinged Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Jeremiah C. Williams, Hengky Chandrahalim
AFIT Patents
A passive microscopic Fabry-Pérot Interferometer (FPI) sensor includes a three-dimensional microscopic optical structure formed on a cleaved tip of the optical fighter using a two-photon polymerization process on a photosensitive polymer by a three-dimensional micromachining device. The three-dimensional microscopic optical structure having a hinged optical layer pivotally connected to a distal portion of a suspended structure. A reflective layer is deposited on a mirror surface of the hinged optical layer while in an open position. The hinged optical layer is subsequently positioned in the closed position to align the mirror surface to at least partially reflect a light signal back …
Method Of Making Hinged Self-Referencing Fabry–Pérot Cavity Sensors, Jeremiah C. Williams, Hengky Chandrahalim
Method Of Making Hinged Self-Referencing Fabry–Pérot Cavity Sensors, Jeremiah C. Williams, Hengky Chandrahalim
AFIT Patents
A method is provided for fabricating a passive optical sensor on a tip of an optical fiber. The method includes perpendicularly cleaving a tip of an optical fiber and mounting the tip of the optical fiber in a specimen holder of a photosensitive polymer three-dimensional micromachining machine. The method includes forming a three-dimensional microscopic optical structure within the photosensitive polymer that comprises a two cavity Fabry-Perot Interferometer (FPI) having a hinged optical layer that is pivotally coupled to a suspended structure. The method includes removing an uncured portion of the photosensitive polymer using a solvent. The method includes depositing a …
Thermal Considerations For Film Cooling Materials With Anisotropic Thermal Conductivity, Carol E. Bryant
Thermal Considerations For Film Cooling Materials With Anisotropic Thermal Conductivity, Carol E. Bryant
Theses and Dissertations
Higher performance requirements and reduced core sizes are driving increases in turbine inlet temperature in gas turbine engines, surpassing the melting point of advanced materials. Newer materials, such as composites, are being introduced into the hot sections of gas turbine engines. Components in the hot section use film cooling to prevent melting. One unique aspect of some high-temperature composites is they have a bulk anisotropic thermal conductivity, therefore heat flow differs relative to traditional metallic components. Film cooling designs can be revolutionized by leveraging anisotropy in high-temperature materials. The purpose of this research is to examine thermal considerations for using …
Determination Of Nonlinear Optical Properties For Gallium Arsenide Phosphide Ternary Compounds And For Tin Thiohypodiphosphate, Peter F. Norris
Determination Of Nonlinear Optical Properties For Gallium Arsenide Phosphide Ternary Compounds And For Tin Thiohypodiphosphate, Peter F. Norris
Theses and Dissertations
The Department of Defense and the commercial sector rely on coherent light sources to emit light that transmits through the atmosphere. Nonlinear optical effects in crystalline materials can be used to generate the laser waves, but certain nonlinear effects negatively impact the performance of laser generating materials. This thesis focuses on characterizing nonlinear optical properties for gallium arsenide phosphide ternary compounds and for tin thiohypodiphosphate. The Maker Fringe experiment is used to determine the d-coefficients of the materials, which describe the magnitude of the nonlinear response of the material. The Z-Scan experiment is used to calculate the nonlinear refractive …
Manufacturing Of A Ceramic Turbine Rotor For A Compact Jet Engine, Bryan T. Leicht
Manufacturing Of A Ceramic Turbine Rotor For A Compact Jet Engine, Bryan T. Leicht
Theses and Dissertations
The primary goal of this study was to develop a low-cost, timely, scalable manufacturing method that produced a ceramic turbine that can be tested as a drop-in replacement on a JetCat P400 small scale gas turbine engine. This research compared two processes for manufacturing a ceramic turbine utilizing a pour casting method and 3D printing using stereolithography ceramic manufacturing (SLCM). The pour casting method used Silicon Nitride to create a cast turbine using a sacrificial 3D printed mold. The SLCM method evaluated producing an alumina turbine using an ADMATEC Admaflex 300 SLCM printer to directly print a ceramic turbine. This …
Potential Solution To Meet Growing Demands Of Refractory Metal: Selective Laser Melting Of Molybdenum-Tungsten Alloy, Jae Yu
Theses and Dissertations
Selective laser melting (SLM) of refractory metals has been of high interest in research due to the metals’ potential desirable characteristics in aeronautical and space applications. In particular, molybdenum and tungsten have been the focus of several studies in the search for high temperature and high strength purposes in applications like supersonic aircraft, re-entry vehicles, nuclear fission, power generation, and other space systems. However, there is still a significant knowledge gap to process defect-free alloys and making use of them in practical engineering functions. The aim of this study is to characterize the relationship between the microstructure and mechanical properties …
Analysis Of Microscopic Carbon Fiber Fragments, Zachary R. Scott
Analysis Of Microscopic Carbon Fiber Fragments, Zachary R. Scott
Theses and Dissertations
Carbon Fiber (CF) has different tensile strengths and transverse moduli depending on how they are fabricated. Some CF is export controlled as it can be used for weapons, spacecraft, or gas centrifuges for enriching nuclear fuel. This research project explored a new way to prepare micron sized single CF threads to measure their transverse modulus and compare the moduli of non-export controlled CF to that of an export controlled CF. Five total polyacrylonitrile (PAN) fibers were used in this project, one of which was an export controlled fiber.
Formulation And Characterization Of Fast-Curing Plastic Scintillators With High-Z Loading, Theodore W. Stephens
Formulation And Characterization Of Fast-Curing Plastic Scintillators With High-Z Loading, Theodore W. Stephens
Theses and Dissertations
Development of novel fast-curing plastic scintillators is highly advantageous due to their potential to be manufactured via 3D printing. Several formulations were developed that exhibit enhanced photon sensitivity, producing modest but discernible photopeaks at an incident gamma energy of 122 keV. The photon sensitivity is achieved via bismuth high-Z loading; however, this practice typically results in diminished light yields. Subsequent formulations, which varied the photoinitiator concentration and curing time, demonstrated successful curing with sufficient plastic hardness, reduced purple discoloration, reduced heat buildup during curing, and resulted in less cracking during the curing process, all of which were correlated with lower …