Engineering Commons^™

Mitral Valve Imaging And Biomechanics: A Workflow Towards Computational Modeling And Validation, Sam Stephens

Graduate Theses and Dissertations

The mitral valve serves a critical role in healthy cardiac function by ensuring the unidirectional flow of oxygenated blood from the left atrium into the left ventricle. It experiences the highest pressures found within the heart and its closure is the result of a complex interaction of several different structures that, furthermore, are unique to each individual. Despite the valve’s vital role however, the specific function of these constituent structures is not fully understood. This, confounded by its asymmetric, personalized nature, make surgical interventions for the mitral valve far less effective than for its neighboring aortic valve. Efforts to overcome …

Making Sense Of Big (Kinematic) Data: A Comprehensive Analysis Of Movement Parameters In A Diverse Population, Naomi Wilma Nunis

University of the Pacific Theses and Dissertations

OBJECTIVE

The purpose of this study was to determine how kinematic, big data can be evaluated using computational, comprehensive analysis of movement parameters in a diverse population.

METHODS

Retrospective data was collected, cleaned, and reviewed for further analysis of biomechanical movement in an active population using 3D collinear resistance loads. The active sample of the population involved in the study ranged from age 7 to 82 years old and respectively identified as active in 13 different sports. Moreover, a series of exercises were conducted by each participant across multiple sessions. Exercises were measured and recorded based on 6 distinct biometric …

Amphisbaenian Head Movement And Burrowing Forces In Damp Granular Media, Jacob Newell

Williams Honors College, Honors Research Projects

Damp granular media is a difficult environment to study because it is both practically complex and it lacks equations which fully describe its behavior. In this study, an oscillatory lateral head movement and its effects while penetrating damp granular media were tested using a robophysical model. This experimental research was inspired by the burrowing behavior of the clade Amphisbaenia, a group of usually limbless squamates that employ a variety of different burrowing behaviors, but it can apply to a wide range of burrowers. This research could help with both human burrowing technologies and the further investigation of animal behaviors.

Characterizing Locomotor Disturbance Perception In Young Adults, Daniel James Liss

Graduate Theses, Dissertations, and Problem Reports

Falls during walking are a leading cause of injuries across aging. Many of these falls are due to slips and trips. The ability to perceive disturbances to ongoing motion may play an important role in the control of walking balance. However, disturbance perception has been investigated in standing balance, but its role in walking balance due to slip- and trip-like disturbances remains largely unknown. Characterizing locomotor disturbance perception in young adults may lead to a more comprehensive understanding of sensorimotor walking balance control.

This work defined locomotor disturbance perception in response to slip and trip-like disturbances in young adults. We …

Effects Of Seat And Axle Position On Pain, Pathology, And Independence In Pediatric Manual Wheelchair Users With Spinal Cord Injury, Hannah Frank

Theses and Dissertations

Manual wheelchair (MWC) users with spinal cord injury (SCI) rely heavily on their upperextremities to complete daily occupations. Due to repetitive shoulder use during wheelchair mobility and propulsion, MWC users are at greater risk of shoulder pain and shoulder pathology, and thus decreased independence, and lower quality of life. The relative fit of the wheelchair and its parameters are critical and can further impact the user’s propulsion biomechanics. Parameters such as seat angle and axle position may put the user in detrimental shoulder positions for longer periods of time, impacting health outcomes even more. Although the effects of wheelchair setup …

Subject-Specific Musculoskeletal Modeling Of Hip Dysplasia Biomechanics, Ke Song

McKelvey School of Engineering Theses & Dissertations

Developmental dysplasia of the hip (DDH) is characterized by abnormal bony anatomy, causes pain and functional limitations, and is a prominent risk factor for premature hip osteoarthritis. Although the pathology of DDH is believed to be mechanically-induced, little is known about how DDH anatomy alters hip biomechanics during activities of daily living, partly due to the difficulties with measuring hip muscle and joint forces. Musculoskeletal models (MSMs) are useful for dynamic simulations of joint mechanics, but the reliability of MSMs for DDH research is limited by an accurate model representation of the unique hip anatomy. To address such challenges, this …

Broadening The Capability Of Kinetics Analysis In Biomechanics, Nicholas Nelson

Electronic Theses and Dissertations

Two studies are discussed in this manuscript each preceded by a literature review of the topic. The first review and study explore agility movements and the effect that alternative upper designs in shoes might have on ground reaction force measures of performance. The second review and study evaluate methods of predicting ground reaction forces without the use of a force platform. A method of using effective forces and ways of improving its accuracy are evaluated in depth.

Biomechanically Inspired Assistive Technology To Restore Movement Of The Upper Limbs After Stroke, Ariel Thomas

Graduate Theses, Dissertations, and Problem Reports

A stroke often damages the neural structures responsible for movement. Stroke is a heterogeneous disease, affecting each survivor differently. There are common motor features of a stroke, but even these features vary across time as an individual proceeds through different stages of recovery. The different ways in which stroke motor impairment can present itself are often overlooked, but these differences are fundamental to the understanding of the disease and its recovery. When motor assessments are capable of acquiring information necessary to parse out a detailed profile of each stroke case, this will lead to an improved neuromechanical understanding of the …

Neuromotor Control Of The Hand During Smartphone Manipulation, Prasanna Kumar Acharya

LSU Doctoral Dissertations

The primary focus of this dissertation was to understand the motor control strategy used by our neuromuscular system for the multi-layered motor tasks involved during smartphone manipulation. To understand this control strategy, we recorded the kinematics and multi-muscle activation pattern of the right limb during smartphone manipulation, including grasping with/out tapping, movement conditions (MCOND), and arm heights.

In the first study (chapter 2), we examined the neuromuscular control strategy of the upper limb during grasping with/out tapping executed with a smartphone by evaluating muscle-activation patterns of the upper limb during different movement conditions (MCOND). There was a change in muscle …

Atv Dynamics And Pediatric Rider Safety, James T. Auxier Ii

Theses and Dissertations--Biomedical Engineering

It has been observed through numerous academic and governmental agency studies that pediatric all-terrain vehicle ridership carries significant risk of injury and death. While no doubt valuable to safety, the post-hoc approach employed in these studies does little to explain the why and how behind the risk factors. Furthermore, there has been no prolonged, widespread, organized, and concerted effort to reconstruct and catalog the details and causes of the large (20,000+) number of ATV-related injuries that occur each year as has been done for road-based motor vehicle accidents. This dissertation takes the opposite approach from a meta-analysis and instead examines …

Automated And Standardized Tools For Realistic, Generic Musculoskeletal Model Development, Trevor Rees Moon

Graduate Theses, Dissertations, and Problem Reports

Human movement is an instinctive yet challenging task that involves complex interactions between the neuromusculoskeletal system and its interaction with the surrounding environment. One key obstacle in the understanding of human locomotion is the availability and validity of experimental data or computational models. Corresponding measurements describing the relationships of the nervous and musculoskeletal systems and their dynamics are highly variable. Likewise, computational models and musculoskeletal models in particular are vitally dependent on these measurements to define model behavior and mechanics. These measurements are often sparse and disparate due to unsystematic data collection containing variable methodologies and reporting conventions. To date, …

Tracking Center Of Mass With Limited Inertial Measurement Units, Connor Nathaniel Morrow

Dissertations and Theses

Wearable motion tracking systems pose an opportunity to study and correct human balance and posture during movement. Currently, these observations are either being conducted in laboratories with the use of camera systems and markers placed on the body, or through the use of suits containing large numbers (15-20) of inertial measurement units. However, to aid with rehabilitation of individuals with impaired balance, there needs to be an option to collect these observations outside of clinics and without incurring much cost from the user. I have focused on three inertial measurement units, one placed on each shank and one placed on …

Improved Orthopaedic Repairs Through Mechanically Optimized, Adhesive Biomaterials, Stephen Wheeler Linderman

McKelvey School of Engineering Theses & Dissertations

Despite countless surgical advances over the last several decades refining surgical approaches, repair techniques, and tools to treat tendon and tendon-to-bone injuries, we are still left with repair solutions that rely on fairly crude underlying mechanical principles. Musculoskeletal soft tissues have evolved to transfer high loads by optimizing stress distribution profiles across the tissue at each length scale. However, instead of mimicking these natural load transfer mechanisms, conventional suture approaches are limited by high load transfer across only a small number of anchor points within tissue. This leads to stress concentrations at anchor points that often cause repair failure as …

Microenvironment Regulates Fusion Of Breast Cancer Cells, Peiran Zhu

Masters Theses

Fusion of cancer cells has been observed in tumors for more than a century and is thought to contribute to tumor development and drug resistance. The low frequency of cell fusion events and the instability of fused cells have hindered our ability to understand the molecular mechanisms that govern cell fusion. We have developed a patterned gel system that can isolate cell fusion events and we demonstrate that several breast cancer cell lines can fuse into multinucleated giant cells in vitro, and the initiation and longevity of fused cells can be regulated solely by biophysical factors. Dynamically tuning the adhesive …

Real-Time Assessment And Visual Feedback For Patient Rehabilitation Using Inertial Sensors, Deepa Adinarayanan

ETD Archive

Rehabilitation exercises needs have been continuously increasing and have been projected to increase in future as well based on its demand for aging population, recovering from surgery, injury and illness and the living and working lifestyle of the people. This research aims to tackle one of the most critical issues faced by the exercise administers-Adherence or Non-Adherence to Home Exercise problems especially has been a significant issue resulting in extensive research on the psychological analysis of people involved. In this research, a solution is provided to increase the adherence of such programs through an automated real-time assessment with constant visual …

Predictive Modeling Of Hip Dislocation: Assessment Of Surgical And Patient Factors To Reduce The Occurrence Of Hip Instability And Adverse Clinical Outcomes, Daniel N. Huff

Electronic Theses and Dissertations

Instability and dislocation remain leading indications for revision of primary Total Hip Arthroplasty (THA). Many studies have addressed the links between implant design and propensity for dislocation, however a comprehensive review of the ability of modern THA constructs to protect against joint instability is needed.

Accordingly, the objective of this study is to provide objective data about THA risks to be considered in the treatment algorithm to protect against adverse joint loading conditions and joint instability. Adverse loading conditions were assessed in a population of activities of daily living using data from telemetric hip implant representation in an FE simulation …

Characterizing Anisotropy In Fibrous Soft Materials By Mr Elastography Of Slow And Fast Shear Waves, John Larson Schmidt

McKelvey School of Engineering Theses & Dissertations

The general objective of this work was to develop experimental methods based on magnetic resonance elastography (MRE) to characterize fibrous soft materials. Mathematical models of tissue biomechanics capable of predicting injury, such as traumatic brain injury (TBI), are of great interest and potential. However, the accuracy of predictions from such models depends on accuracy of the underlying material parameters. This dissertation describes work toward three aims. First, experimental methods were designed to characterize fibrous materials based on a transversely isotropic material model. Second, these methods are applied to characterize the anisotropic properties of white matter brain tissue ex vivo. Third, …

Rehabilitating Asymmetric Gait Using Asymmetry, Tyagi Ramakrishnan

USF Tampa Graduate Theses and Dissertations

Human gait is a complex process that involves the coordination of the central nervous and muscular systems. A disruption to the either system results in the impairment of a person’s ability to walk. Impairments can be caused by neurological disorders such as stroke and physical conditions like amputation. There is not a standardized method to quantitatively assess the gait asymmetry of affected subjects. The purpose of this research is to understand the fundamental aspects of asymmetrical effects on the human body and improve rehabilitation techniques and devices. This research takes an interdisciplinary approach to address the limitations with current rehabilitation …

The Development Of A Platform Interface With The Use Of Virtual Reality To Enhance Upper-Extremity Prosthetic Training And Rehabilitation, Ashley D. Knight

USF Tampa Graduate Theses and Dissertations

This dissertation focuses on the investigation and development of an effective prosthetic training and rehabilitation platform with the use of virtual reality to facilitate an effective process to return amputees to the highest level of independence and functioning possible.

It has been reported that approximately 10 million people live with a limb loss worldwide, with around 30% being an upper-extremity amputee. The sudden loss of a hand or arm causes the loss of fine, coordinated movements, reduced joint range of motion (ROM), proprioceptive feedback and aesthetic appearance, all which can be improved with the use of a prosthesis and proper …

New Tools For Viscoelastic Spectral Analysis, With Application To The Mechanics Of Cells And Collagen Across Hierarchies, Behzad Babaei

McKelvey School of Engineering Theses & Dissertations

Viscoelastic relaxation spectra are essential for predicting and interpreting the mechanical responses of materials and structures. For biological tissues, these spectra must usually be estimated from viscoelastic relaxation tests. Interpreting viscoelastic relaxation tests is challenging because the inverse problem is expensive computationally. We present here (1) an efficient algorithm and (2) a quasi-linear model that enable rapid identification of the viscoelastic relaxation spectra of both linear and nonlinear materials. We then apply these methods to develop fundamental insight into the mechanics of collagenous and fibrotic tissues.

The first algorithm, which we term the discrete spectral approach, is fast enough to …

Mechanics Of Early Retina And Lens Development In The Embryo, Alina Oltean

McKelvey School of Engineering Theses & Dissertations

Mechanical forces play an essential role in morphogenesis, the shaping of embryonic structures. This research focuses mainly on eye development, a problem that has been studied for decades using a variety of approaches. However, the mechanics of the early stages of eye formation remain incompletely understood.

The embryonic eyes begin as bilateral protrusions called optic vesicles (OVs) that grow outward from the anterior end of the brain tube. The optic vesicles contact and adhere to the overlying surface ectoderm (SE) via extracellular matrix (ECM). Then, both layers thicken in the region of contact to form the retinal and lens placodes, …

Wheelchair Fatigue Reducer, Aaron Miller, Dennis Andre Norfleet

Chancellor’s Honors Program Projects

No abstract provided.

Markerless Radiostereogammetry Of The Shoulder Joint In Humans: Comparisons Of Scapulohumeral Kinematics Between Individuals With Healthy And Supraspinatus-Impaired Shoulders, Ashley N. Hannon

Electronic Thesis and Dissertation Repository

The purpose of this collection of studies was to further develop the knowledge of shoulder motion in order to better understand joint function through direct measurement of 3D scapulohumeral joint kinematics using a technique of high accuracy. Markerless, bi-planar fluoroscopic radiostereometric analysis using a generic shoulder model was developed in this thesis, reducing the amount of radiation exposure to subjects. The studies compared kinematic data of the scapulohumeral joint in six degrees of freedom with a precise, in-vivo measuring technique. Data were collected on young and older healthy individuals, individuals with a torn supraspinatus and post-surgical intervention.

Although this generic …

Investigation Of The Inherent Chemical, Structural, And Mechanical Attributes Of Bio-Engineered Composites Found In Nature: Alligator Gar’S Exoskeleton Fish Scales, Wayne Derald Hodo

Graduate Theses and Dissertations

The U.S. Army has determined a huge cost savings of up to 51% can be accomplished by reducing the gross vehicle weight, for their personnel carrier, by 33%. To cut cost, composite materials are needed. Man-made composites can have superior material properties (high-strength, high-fracture toughness, and lightweight), but they are prone to delamination at the glued-layered interface. In contrast, fish scale is a natural composite that has the same material properties and, additionally, tend not to delaminate.

The focus of this study was to learn how nature integrates hard and soft materials at each length scale to form a layered …

Role Of Sensation In Altered Phalanx Grip Force In Persons With Stroke, Leah R. Enders

Theses and Dissertations

Many individuals experience hand impairment after stroke leading to decreased ability to perform daily living activities. Previous research studies have investigated how stroke survivors' pinch grip control differs from healthy individuals, even though many individuals can only grasp with power grip after stroke. Furthermore, many stroke survivors experience tactile sensory deficit in their paretic limb in addition to motor deficit. It is currently unknown how stroke induced tactile sensory deficit affects power grip force directional control, which is important in terms of preventing object slippage and power grip normal force generation. Additionally it is unknown if power grip could be …

Skeletal Muscle Contraction Simulation: A Comparison In Modeling, Jonathan M. Ford

USF Tampa Graduate Theses and Dissertations

Computer generated three-dimensional (3-D) models are being used at increasing rates in the fields of entertainment, education, research, and engineering. One of the aspects of interest includes the behavior and function of the musculoskeletal system. One such tool used by engineers is the finite element method (FEM) to simulate the physics behind muscle mechanics. There are several ways to represent 3-D muscle geometry, namely a bulk, a central line of action and a spline model. The purpose of this study is to exmine how these three representations affect the overall outcome of muscle movement. This is examined in a series …

Modeling Of Legged Locomotion With A Suspended Load In The Sagittal Plane, Karna P. Potwar

Open Access Theses

Walking or running while carrying loads has always been a tedious task, more so when the loads are heavy. Such a task of carrying loads not only requires extra effort but also leads to physical pain and in some cases injury. Prior studies on human locomotion with a suspended load have used models that are restricted in their DOFs and so are not able to take into account the fore aft movement in human beings. The objective of this thesis is to model the dynamics of sagittal plane center-of-mass locomotion with a suspended load and apply findings to carrying loads …

Evaluation Of Transfer Technologies To Preserve Shoulder Function In Sci, Karen Michelle Mann

USF Tampa Graduate Theses and Dissertations

This study investigated a series of independent unassisted and device-assisted transfers from a wheelchair to vehicle mock-up and vice versa while simultaneously capturing kinematic, kinetic and electromyographic (EMG) data of impaired volunteers. The study provides a venue for observation and evaluation of upper extremity (UE) joint stresses, muscular force and functional demands associated with transfers in persons with spinal cord injury (SCI) to ultimately prevent UE injury, minimize excessive stress, preserve functionality and limit pain. If people with SCI lose function of their UEs, due to pain and/or degeneration, they must then rely on others for everyday tasks.

Five paraplegic …

Automation Of Orthodontic Wire Tester For Performing Three Point Bending Tests, Adithya Venkatesan

Master's Theses

Abstract

Understanding the biomechanical factors in orthodontics is important in order to improve the overall effectiveness of actual clinical treatment. An accurate method to study the threedimensional (3D) force systems and the resulting movements of teeth during orthodontic treatment is needed along with the understanding of the material properties of any orthodontic wire. Until recently, most of the orthodontic biomechanics literature was limited to twodimensional experimental studies. Recent advances in threedimensional computer modeling have also been developed but have been limited to the manual control of tooth movement. Overall, there is very little published evidence in the literature on the …