Engineering Commons^™

Framework For The Use Of Extended Reality Modalities In Aec Education, Barbara Oliveira Spitzer, Jae Hoon Ma, Ece Erdogmus, Ben Kreimer, Erica Ryherd, Heidi Diefes-Dux

Biological Systems Engineering: Papers and Publications

The educational applications of extended reality (XR) modalities, including virtual reality (VR), augmented reality (AR), and mixed reality (MR), have increased significantly over the last ten years. Many educators within the Architecture, Engineering, and Construction (AEC) related degree programs see student benefits that could be derived from bringing these modalities into classrooms, which include but are not limited to: a better understanding of each of the subdisciplines and the coordination necessary between them, visualizing oneself as a professional in AEC, and visualization of difficult concepts to increase engagement, self-efficacy, and learning. These benefits, in turn, help recruitment and retention efforts …

Analysis Of Library Book Borrower Patterns Using Apriori Association Data Mining Techniques, Lucky Zamzami, Ari Agung Prastowo, R Rulinawaty, Robbi Rahim

Library Philosophy and Practice (e-journal)

The library is one of the most important facilities because it manages collections of written works, printed works, and recorded works and can provide information resources as well as be a driving force for the advancement of an educational institution. Conventional libraries will have piles of book borrowing transaction data recorded in the agenda book, which is only an archive, and the placement of books far apart, which causes members to take longer to find books when borrowing books of different types, is an issue that must be addressed. To overcome these two issues, a recommendation for an intelligent system …

Inclusive Access For All, Marcia Dority Baker, Jaci Lindburg

Information Technology Services: Publications

Inclusive Access provides a framework for digital course material delivered via the learning management system (LMS) day-one to students. This platform assists instructors with selecting current, quality, affordable material, and supports learning analytics by providing engagement data in Canvas. The University of Nebraska Provost office has funded an initial series of grants to support open educational resources (OER) initiatives at the Lincoln, Kearney, and Omaha campuses for several years. The vast majority of these dollars went to incentivize faculty in the adoption of OER. The OER and Inclusive Access pilots are ready to mature into a service supported by Academic …

Using Schema Training To Facilitate Students' Understanding Of Challenging Engineering Concepts In Heat Transfer And Thermodynamics, Dazhi Yang, Ruth Streveler, Ronald L. Miller, Inanc Senocak, Jim Slotta

Educational Technology Faculty Publications and Presentations

Background: Chi and colleagues have argued that some of the most challenging engineering concepts exhibit properties of emergent systems. However, students often lack a mental framework, or schema, for understanding emergence. Slotta and Chi posited that helping students develop a schema for emergent systems, referred to as schema training, would increase the understanding of challenging concepts exhibiting emergent properties.

Purpose: We tested the effectiveness of schema training and explored the nature of challenging concepts from thermodynamics and heat transfer. We investigated if schema training could (a) repair misconceptions in advanced engineering students and (b) prevent them in beginning engineering students. …

Using Technology To Support Student Learning In An Integrated Stem Learning Environment, Dazhi Yang, Sally J. Baldwin

Educational Technology Faculty Publications and Presentations

This paper provides the first review and illustration of technology-use strategies for supporting student learning in different integrated science, technology, engineering, and mathematics (STEM) learning environments. An integrated STEM learning environment may focus on integrating and learning science and mathematics or integrating and learning engineering and technology simultaneously for multiple levels of learners. An integrated STEM learning environment breaks down disciplinary boundaries and allows students to apply multidisciplinary knowledge in solving problems. This study illustrates four technology-use strategies to support student learning in an integrated STEM learning environment: a) providing authentic learning contexts, b) offering web-based inquiry environments, c) expanding …

Elementary School Student Development Of Stem Attitudes And Perceived Learning In A Stem Integrated Robotics Curriculum, Yu-Hui Ching, Dazhi Yang, Sasha Wang, Youngkyun Baek, Steve Swanson, Bhaskar Chittoori

Educational Technology Faculty Publications and Presentations

Robotics has been advocated as an emerging approach to engaging K-12 students in learning science, technology, engineering, and mathematics (STEM). This study examined the impacts of a project-based STEM integrated robotics curriculum on elementary school students’ attitudes toward STEM and perceived learning in an afterschool setting. Three elementary school teachers and 18 fourth to sixth graders participated in an eight-week-long program. Quantitative and qualitative data were collected and analyzed, and showed students’ attitudes toward math improved significantly at the end of the robotics curriculum. Three specific areas of learning were identified, including STEM content learning and connection, engagement and perseverance, …

An Investigation Of Engineering Design Cognition And Achievement In Primary School, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim, Liwei Zhang

Faculty Publications

This study examined the design cognition and achievement results of both kindergarten and fourth grade students engaged in engineering design-based instructional activities. Relationships between design cognition and student grade level, as well as quality of student work, were investigated. 30 concurrent think-aloud protocols were collected from individual primary students as they worked in groups to design and make a solution to a design task. The concurrent think-aloud protocols were examined and coded to determine the duration of time the participants devoted to a pre-established set of mental processes for technological problem solving. Significant differences between kindergarten and fourth grade participants …

Bespoke Mobile Application Development: Facilitating Transition Of Foundation Students To Higher Education, Nevan Bermingham, Mark Prendergast

Books/Book Chapters

Smartphone usage by students has increased rapidly over the last number of years, and it is expected that the utilisation of mobile applications in educational environments will continue to increase. This chapter focuses on a bespoke mobile application which aims to facilitate the transition of Foundation students to Higher Education in an Irish setting. Foundation students comprise of Access and International Students participating on pre-degree foundation courses. These students experience a major life change in making this transition and it is important that efforts are made to ensure a successful adjustment experience. Research suggests that mobile technologies can play a …

The Design And Implementation Outcome Of An Online Undergraduate Thermodynamics Class, Dazhi Yang, Krishna Pakala

Educational Technology Faculty Publications and Presentations

Online learning is not common for most undergraduate core engineering courses. However, the growing need for online engineering courses necessitates the design and delivery of online courses that can allow for the flexibility and convenience the distance learning experiences can offer. Thermodynamics is among the most difficult engineering subjects to teach, especially online, where instructors are unable to demonstrate the overwhelming number of equations and applications as they would in face-to-face lectures. This paper describes the design and development of an online, undergraduate thermodynamics class. It reports the implementation outcome of student final course grade and the students’ learning experience …

Reconceptualizing Pedagogical And Curricular Knowledge Development Through Making, Steven Greenstein, Justin Olmanson

Department of Teaching, Learning, and Teacher Education: Faculty Publications

While making is typically tethered to narratives of entrepreneurship and business, it can provide a gateway to meaningful interaction and deepened understanding of both content and pedagogy. In this article we provide descriptions of two courses—one each at the pre-service and in-service levels—that engage teachers in making and design practices that we hypothesized would inform their pedagogical and curricular thinking. With a focus on the design of new tools to support teaching and learning through the use of human-centered design practices and digital fabrication technologies, these courses have teachers exploring at the intersection of content, pedagogy, and making. Specifically, they …

Weights And Balances: Integrating Models For Prevention And Response To Southern California Offshore Oil Spills, Carmen Watts Clayton, Amoret Bunn

STAR Program Research Presentations

Licensing offshore oil and gas reserves in the United States waters are overseen by the U.S. Department of the Interior’s Bureau of Safety and Enforcement (BSEE). The licensing application includes planning for any worst-case oil spill scenario between BSEE and the applicant based on lessons learned from historic offshore spills such as the Deepwater Horizon (2010), Exxon Valdez (1989), and the Union Oil Platform Blowout (1969). The process for planning to respond to oil spills involves coordination with multiple agencies, trustees, and stakeholders to ensure that oil spill responses consider multiple factors, including ecologically sensitive species, commercial transportation and fisheries, …

Developing Entrepreneurial Thinking In Engineering Students By Utilizing Integrated Online Modules, Ronald S. Harichandran, Maria-Isabel Carnasciali, Nadiye O. Erdil, Cheryl Q. Li, Jean Nocito-Gobel, Samuel Bogan Daniels

Mechanical and Industrial Engineering Faculty Publications

An approach to develop entrepreneurial thinking skills in engineering students by integrating online modules into existing courses is described. Eighteen online modules covering a variety of topics will be developed. Developers for the modules are selected by reviewing proposals submitted in response to a broadly distributed request for proposals. Developers undergo extensive training before embarking upon module development. Students will complete each standalone module outside of class hours. Instructors who deploy a module in their course will develop contextual course assignments that reinforce concepts covered in the modules. These instructors also undergo training and are assisted by an external consultant. …

A Systematic Review Of The Critical Factors For Success Of Mobile Learning In Higher Education (University Students' Perspective), Muasaad Alrasheedi, Luiz Fernando Capretz, Arif Raza

Electrical and Computer Engineering Publications

The phenomenon of the use of a mobile learning (m-Learning) platform in educational institutions is slowly gaining momentum. However, the enthusiasm with which mobile phones have been welcomed into every aspect of our lives is not yet apparent in the educational sector. To understand the reason, it is important to understand user expectations of the system. This article documents a systematic review of existing studies to find the success factors for effective m-Learning. Our systematic review collates results from 30 studies conducted in 17 countries, where 13 critical success factors were found to strongly impact m-Learning implementation. Using these results …

Grassroots Or Returning To One’S Roots? Unpacking The Inception Of A Youth-Focused Community Makerspace, Victor R. Lee, Whitney L. King, Ryan Cain

Instructional Technology and Learning Sciences Faculty Publications

In this paper, we describe the individuals and factors contributing to the emergence of a community makerspace in a small city in the United States. As research into how makerspaces have come into existence is still in a nascent stage, this single case study is intended to describe and highlight some of the complexities involved in creating such a facility. Based on analysis of onsite observations, interviews of adults connected with the space, and electronic communications, we present a story of how two co-founders of a youth-focused makerspace went from having initial interest in extracurricular activities for their own children …

Media Usage In Post-Secondary Education And Implications For Teaching And Learning, Gerd Gidion, Luiz Fernando Capretz, Ken Mead Dr., Michael Grosch Dr.

Electrical and Computer Engineering Publications

The Web 2.0 has permeated academic life. The use of online information services in post-secondary education has led to dramatic changes in faculty teaching methods as well as in the learning and study behavior of students. At the same time, traditional information media, such as textbooks and printed handouts, still form the basic pillars of teaching and learning. This paper reports the results of a survey about media usage in teaching and learning conducted with Western University students and instructors, highlighting trends in the usage of new and traditional media in higher education by instructors and students. In addition, the …

Development Of An Interactive Water Management Role‐Playing Game As An Educational Tool Representing The Central Nebraska Platte River Valley Social‐Economic‐Ecological System, Victoria Chraibi, Nathan Rossman, Anil Giri, Noelle Hart, Zion Schell

DBER Speaker Series

As members of the National Science Foundation's Integrative Graduate Education and Research Traineeship (IGERT), we have gained valuable experience abroad in Europe learning about and participating in research that utilizes serious role‐playing games representing a watershed with its land use and river system. The focus of this research is on the development of such a game representing the central Platte River valley and its dynamics according to the activities played by the players and uncertain streamflow inputs. The game is adapted specifically from two other games, one called Wat‐A‐Game, developed at the French public institutes IRSTEA and CIRAD (https://sites.google.com/site/waghistory/ …

Improvement Of Pedagogical Laboratory Based Learning: Multimedia Enhanced Instructional Methods, Sumbul Khan

Masters Theses & Specialist Projects

In engineering technology and other scientific-based education, lab-based courses play a crucial role (Ma & Nickerson, 2006). Even though laboratory experience in student learning is crucial, it faces some problems. Due to insufficient laboratory conditions that lead to overcrowding and inability to view demonstrations, the effectiveness of hands on experience declines (Tiwari & Singh, 2011; Tuysuz, 2010). Considering the limitations that constrain lab experience, investigating and implementing alternatives to enhance pedagogical laboratory based learning becomes inevitable. This study investigates multimedia enhanced pedagogical teaching methods for delivering laboratory instruction to students. The purpose of this study was to improve pedagogical laboratory …

Online Resource Aiding Students To Practice And Perfect Manufacturing Based Skills, Robert Martin Morris, Frank Dunne, Maurice Collins

Conference papers

As part of our teaching in the Departments of Fabrication and Transport Engineering in the Technological University Dublin we use industrial metal folding machines to help students to learn the sequencing of folds on manufactured sheet metal components. Many students have difficulty visualising the folding sequences required to complete practical manufacturing assignments. This paper details the digital media resource which was developed to provide students with the opportunity to offer a proposed solution to questions which relate to the folding sequence required for these components. Feedback is provided through the medium of pre recorded videos which show the component being …

What Value Does Service Learning Have On Introductory Engineering Students' Motivation And Abet Program Outcomes?, Carol Sevier, Seung Youn Chyung, Janet Callahan, Cheryl Schrader

Organizational Performance and Workplace Learning Faculty Publications and Presentations

A quasi-experimental study was conducted to investigate the effectiveness of using a service learning (SL) method on influencing introductory engineering students' motivation and ABET program outcomes, compared to the effectiveness of using a conventional, non-service-learning (NSL) method. The sample used in the study was 214 students enrolled in an Introduction to Engineering course at a medium-size university in the northwestern region of the U.S. during the fall semester of 2009 and the spring semester of 2010. Sixty-nine students completed SL projects while 145 students completed NSL projects. Both SL and NSL projects were team-based. Using the ARCS model as a …

Asynchronous Use Of Engineering (Materials) Education Videos, Craig Johnson, Arthur D. Morken

All Faculty Scholarship for the College of the Sciences

Engineering education delivery is dynamic and increasingly asynchronous. An observation that students had very different levels of knowledge and skills as they progressed through our programs, led the authors to use audio/visual media as a leveling intervention. In this effort the authors collected data to determine if audio/visual media can be used to increase performance in the development of a program related task and guide students to higher levels of learning on Blooms Taxonomy through the development of student created learning aids.

One specific need was reflected in the disparate skills of our majority component of ‘transfer’ students in our …

Real-World Industry Collaboration Within A Mechatronics Class, Vidya Nandikolla, Susan Shadle, Patricia Pyke, John Gardner, Robert Grover, Suhas Pharkute

Electrical and Computer Engineering Faculty Publications and Presentations

This paper describes the implementation and assessment of an innovative senior/graduate level mechatronics (robotics) module that integrated structured and unstructured learning experiences, in collaboration with an industry partner. With real-world constraints and expectations, students designed and delivered a product as the final project. In fall 2007, the corporate partner provided state-of-the-art, programmable robotic kits with a user-friendly programming environment. The assigned project was to design a biomedical robot to work in a hospital intensive care unit (ICU) to perform tasks such as transporting supplies or delivering paperwork. Students with diverse skills and majors were grouped in ten teams, two to …

Enhancing Precalculus Curricula With E-Learning: Implementation And Assessment, Janet Callahan, Seung Youn Chyung, Joanna Guild, William Clement, Joe Guarino, Doug Bullock, Cheryl Schrader

Materials Science and Engineering Faculty Publications and Presentations

During Fall semester of 2007, a semester-long, quasi-experimental study was conducted at Boise State University to investigate the effectiveness of a systematically sequenced and managed, self-paced e-learning activity on improving students’ academic performance and motivation. A total of 125 students enrolled in 3 different sections of a Precalculus class participated in the study. The e-learning activity was implemented in 2 of the 3 sections as a required homework assignment. Students enrolled in one of the 2 selected sections were all engineering majors. The 3^rd section was a control group that did not use the e-learning activity. A pre-test, measuring …

The Videoconferencing Classroom: What Do Students Think?, Dr. Anthony Mark Doggett

Architectural and Manufacturing Sciences Faculty Publications

The advantages of video conferencing in educational institutions are well documented. Scholarly literature has indicated that videoconferencing technology reduces time and costs between remote locations, fill gaps in teaching services, increases training productivity, enables meetings that would not be possible due to prohibitive travel costs, and improves access to learning (Martin, 2005; Rose, Furner, Hall, Montgomery, Katsavras, & Clarke, 2000; Townes-Young & Ewing, 2005; West, 1999). However, there are few studies that analyze the effectiveness of videoconferencing from the student’s perspective. Videoconferencing technology is often touted as a method to connect with previously inaccessible student populations, but does it adequately …

Using Narrated Powerpoint Presentations For Distance Learning, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Dr. Savory highlights his use of narrated powerpoint slides for the development of his distance education course. In addition,he highlight the strucutre and assessment approaches used for his course.

Experiences Teaching Website Engagibility To Computer Science Students., Pan Liqiang, Bryan Duggan, Ronan Fitzpatrick

Conference papers

In the second year of our degree program, DT228 students study a subject called Web Development. In this paper we describe our studio classroom based teaching approach to this subject and explain how using this approach has enabled us to expand the scope of the course to include the important concept of website engagibility. We present a summary of current theories on website engagibility and explain how we incorporated these theories into the course. We further describe an experiment which we carried out in order to encourage students to reflect on website engagibility and incorporate it into their continuous assessments.

Personal Reflections On Psi In Engineering Mechanics, David Haws

Civil Engineering Faculty Publications and Presentations

There seems to be little argument that our students need to be encouraged toward educational selfdirectedness. Yet self-direction must be based on past learning success and present learning readiness. There is at least a potential conflict here: students needs to assume responsibility for their own education, directing it to topics of their own choosing, but their learning must also at least occasionally be directed along a hierarchical path of sequentially dependent learning objectives (which path may not be so obvious to the uninitiated). The Personalized System of Instruction (PSI) seems to enable both of these not-always-compatible goals. PSI allows the …