Engineering Commons^™

Wast3d Potential, Andrew Larsen

Masters Theses

Waste is obsolete. Standard building industry practices are harmful to the environment. Non-traditional construction methods were examined as alternatives. Circular design logic was the guiding principle in material choice. Additive manufacturing is a proven modern method for building construction. Research on 3D printing case studies revealed that recycled plastic is a proven material and readily available. Removing plastic waste from the environment and sequestering it in architectural components gives the material a new purpose. The component of focus was a building block for a wall assembly. Inspiration was taken from the hexagonal Basalt rock formations found near volcanic fault lines. …

Relationships Among Mineralogy, Geochemistry, And Oil And Gas Production In The Tuscaloosa Marine Shale, Hayley Roxana Beitel

Masters Theses

"The Tuscaloosa Marine Shale (TMS) is an unconventional shale reservoir located in southeast Louisiana and southwest Mississippi. Limited mineralogical and geochemical data for the TMS have been published. The data that do exist indicate that the formation is heterogeneous. Consequently, previous investigators and oil and gas companies have not managed to effectively link mineralogical and chemical changes to oil and gas production in the TMS. These linkages are critical to establish for future exploration efforts. In this study, we attempt to establish these relationships by gathering all existing mineralogical and chemical data in the TMS, including newly acquired data from …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

Development Of A Variogram Approach To Spatial Outlier Detection Using A Supplemental Digital Elevation Model Dataset, Zane Daniel Helwig

Masters Theses

"When developing a ground water model, the quality of the dataset should first be evaluated. Spatial outliers can lead to predictions which are not representative of actual conditions. In order to isolate misrepresentative points, a method is presented which examines the experimental variogram of a ground water elevation dataset. To define a threshold variance between pairs of ground water elevation measures, ground elevation values from a digital elevation model (DEM) are used to determine a maximum reasonable variance expected to occur on the experimental variogram. To determine appropriate DEM parameters, a separate study was also done which observed characteristic behavior …

Mining Asteroids For Volatile Resources: An Experimental Demonstration Of Extraction And Recovery, Egboche Christopher Unobe

Masters Theses

"Gaseous compounds trapped within carbonaceous asteroids may prove to be important targets for prospective space miners in the near-term. Volatile release is from hydrated, hydroxylated and carbonated phases present, making such bodies attractive as feedstock for the production of H₂O, CO₂ and simple organic compounds. A source of these species in orbit provides an opportunity to locally produce space-craft propellant and other life-support gases through the application of In-situ Resource Utilization (ISRU).

For this study, an experimental vacuum system was modified and used to test the technical validity of radiatively heating asteroid simulants to extract contained gaseous …

Hydrogeochemical Controls On Reactive And Nonreactive Solute Transport In Heterogenous Porous Media, Mahta Gholizadeh Ansari

Masters Theses

"This work examines how physical and chemical heterogeneity can affect reactive and non-reactive transport in porous media. The effect of heterogeneity of the porous media is investigated both on dissolution rate of magnesite and attenuation time of nonreactive contaminants in non-reactive media. Various spatial distribution were created using statistical parameters in PETREL.A total of 6793 transport modeling simulations were run using CrunchFlow. Lasso regression was used to select most significant features and those features are then used in linear regression and deep learning models.

The magnesite dissolution simulations were performed under different permeability ratios (magnesite /sand permeability) and inlet pH. …

Evaluation Of Swelling And Re-Swelling Of Preformed Particle Gels (Ppg) When Exposed To Co₂, Sujay Suresh

Masters Theses

"Long term water/gas flooding induces high permeability channels in reservoirs. Reservoir heterogeneity becomes the most prominent challenge faced in mature oil fields. Gel treatment has been a proven solution to counter the problem of reservoir heterogeneity, to provide in-depth treatment and improve the sweep efficiency for reservoirs. Preformed particle gels (PPGs) were developed as an alternative to in-situ gels as they preferentially penetrate and shutoff high permeability zones, leaving the low permeability zones undamaged. These gels have been predominantly used in water flooding projects, but have not been employed in carbon dioxide (CO₂) flooding projects. CO₂ Resistant …

Assessment Of Rockfall Rollout Risk Along Varying Slope Geometries Using The Rocfall And Crsp Software, Mariam S. Al E'Bayat

Masters Theses

"Most routes in mountainous areas suffer from rock falling, rolling and bouncing risk. There are many computer programs concerned with simulating the rockfall problem, and whereas they have the same purpose, they however differ in the input data that's needed to simulate the problem, and they also differ in the way of processing and kind of output.

This study used Rocfall® and the Colorado Rockfall Simulation Program (CRSP®) to simulate sixty-three models of varying slope geometry, where only the slope geometry is changed with the same material properties for both the slope and the rocks.

Both programs were fast and …

Deformation Processes At The Leading Edge Of The Sevier Fold And Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Masters Theses

"Deformation processes leading to formation and abandonment of 'triangle zones' along the leading edge of the Sevier fold and thrust belt are investigated near Kanarraville, Utah through construction of a detailed geologic map and cross-section along Spring Creek. Here the eastern limb of the Kanarra fold, a Sevier structure, is well exposed along the Hurricane Cliffs due to uplift and erosion of the footwall of the Hurricane Fault. The east-verging Kanarra fold changes from upright to overturned within Spring Creek. Within the fold limb, parasitic folds, minor thrust faults, and duplex structures result in local tectonic overthickening of units and …

Characterization Of Fracture Initiation In Non-Cylindrical Buckle Folds Using 3d Finite Element Analysis, Eli Jacob Steinbeck

Masters Theses

"The spatial distribution of fracture sets associated with buckle folds has been well documented in field studies. There are difficulties, however, in placing accurate constraints on the timing of the initiation of individual fracture sets during the deformation history of the fold under in-situ conditions. This study investigates specific conditions that give rise to the initiation of various fracture sets in the hinge and limb of a pericline, based on an analysis of the effective stress evolution during the processes of buckling and erosional unloading. A 3D finite element modeling approach is used to simulate the effective stress evolution in …

Fluid Flow Through Deformation Band, Huining Zhang

Masters Theses

"Cataclastic deformation bands, which are common in porous sandstone, have the potential to restrict fluid flow. Geological studies have shown that permeability of deformation band shear zones can be one to five orders of magnitude less than for the sandstone host rock. However, recent studies based on simplified analytical estimates have shown that fluid flow in jointed deformation bands may not be retarded since joints play an important role in conducting fluids. In this study, 2 dimensional finite element analysis (FEA) is used to simulate the total discharge flow rate through jointed deformations. Variations of single planar and conjugate jointed …

Phytoforensics Tools: The Degradation And Detection Of Chlorinated Solvents In Integrated Systems, Tommy J. Goodwin Jr.

Masters Theses

"Due to decades of mismanaged pollutants entering groundwater, subsurface pollution of various compounds has become a widespread challenge. Chlorinated solvents are the most common groundwater contaminants that persist in aquifers, and remediation of these wide-spread plumes is difficult. Bioremediation, permeable reactive barriers, and phytoremediation are remedial technologies that have been developed and applied to chlorinated solvents in groundwater systems. This study integrates these technologies in different combinations to demonstrate the remediation potential of this approach. Zerovalent iron (ZVI) and bioaugmentation with a Dehalococcoides sp. (DHC) culture were applied separately and in combination for degradation of perchloroethene (PCE). Salix pentandra were …

3d Seismic Structural And Stratigraphic Interpretation Of The Tui-3d Field, Taranaki Basin, New Zealand, Gorkem Yagci

Masters Theses

"Identifying seismic structures and stratigraphy are important for exploration of hydrocarbons. The purpose of this study is to discover seismic structural and stratigraphic features and to utilize the results for interpreting depositional environments. A 3D seismic dataset from the Tui-3D Field, the Taranaki Basin, New Zealand with well data were used to visualize structures, to detect stratigraphic features, to identify main lithology, to understand depositional environment, and to describe seismic facies and reflection patterns of the target horizons. The major formations are in the Kapuni Group.

Seismic structural interpretation indicates thirty-two minor faults, which may play an important role in …

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …

Imaging Reinforced Concrete: A Comparative Study Of Ground Penetration Radar And Rebarscope, Abhishek Kodi

Masters Theses

"Geophysical techniques have been playing a very vital role in subsurface imaging in the recent past. Technology has been making it both reliable and convenient to utilize non-destructive geophysics techniques like Ground Penetration Radar, Induction current based Rebarscope, Seismic methods, ERT, etc. The applications range from shallow subsurface investigation of Bridge decks to old tunnels, mapping of rabars in a pre-existing construction and analyzing the concrete strength.

The thesis constitutes of a comparative study and analysis of a Ground Penetration Radar system and a Rebarscope. Individual parameters obtained directly from the study and obtained indirectly from the study shall be …

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …

Structural Analysis Of The Tablerock Thrust Sheet, Grandfather Mountain Window, Northwestern North Carolina: Emplacement Kinematics Of A Large Horse In A Major Thrust System, Ann Elizabeth Walker

Masters Theses

The Tablerock thrust sheet is exposed along the southwestern margin of Grandfather Mountain window in northwestern North Carolina, where it separates basement and cover rocks inside the window from basement thrust sheets of the overriding Blue Ridge-Piedmont megathrust sheet. It is a complex of footwall-derived horses of rifted-margin metasedimentary rocks, including Neoproterozoic to Early Cambrian Chilhowee Group quartzite and phyllite, and Shady Dolomite. Penetrative deformation throughout the Tablerock thrust sheet is defined by an extensively transposed foliation, and strong colinearity between well developed transport lineations and SE/NW-trending tight, isoclinal, and sheath folds. Centimeter- to meter-scale sheath folds are common throughout …

Aeolian Simulations: A Comparison Of Numerical And Experimental Results, With Projections For Titan., Oscar Lee Mathews

Masters Theses

Aeolian processes are major determinants of geomorphology on bodies in the Solar System possessing an atmosphere-surface interface and transportable sediment, including Earth, Mars, Venus, and Titan. Substantial efforts have been made over the last few decades to understand these processes using specialized wind tunnels, field studies, and, more recently, numerical simulations. This thesis describes a model of aeolian sediment transport using computational fluid dynamics (CFD), and compares the results with those obtained in the Martian Surface Wind Tunnel (MARSWIT) testing conducted in the Planetary Aeolian Laboratory at NASA Ames Research Center. The ultimate goal of the thesis was to develop …

Structural, Depositional, And Diagenetic Controls On Reservoir Development: St. Peter Sandstone, Newaygo County, Michigan, Mark S. Caldwell

Masters Theses

Enhanced reservoir quality in the Middle Ordovician St. Peter Sandstone is observed in gas bearing zones in wells located on domal structures. Geometry and degree of this enhanced porosity development is the result of the interplay of structural, depositional, and diagenetic controls. An integrated subsurface study of the Woodville/Goodwell field area was performed in order to document controls on hydrocarbon accumulation.

Recurrent structural growth of domal features throughout the Paleozoic is well documented by isopach mapping. Burial and thermal history studies indicate that hydrocarbons were generated in Ordovician aged source rocks during late Devonian to early Mississippian time, and accumulated …

Sedimentology Of The Bedford-Berea Sequence (Early Mississippian), Williams Field, Michigan, David Alan Balthazor

Masters Theses

The Berea Sandstone has produced in excess of 1.6 million barrels of oil in the Williams field since discovery in 1980. Seven lithofacies are identified from conventional core in the Bedford-Berea sequence. These facies are interpreted as deltaic deposits comprising prodelta (Bedford Shale), delta front, destructive marine shale, abandoned distributary channel-fill, interdistributary bay-fill, transgressive marine sandstone, and marine shale (Sunbury Shale) facies. Passive channel-fill facies truncate reservoir sandstone bodies and compartmentalize the field NW-SE across the trend of the northwestplunging anticline.

The two reservoir facies in the Williams field are the delta front and transgressive marine sandstones. The sandstone framework …

A Study Of The Effect Of Jointing On The Blasting Of Granite, Graniteville, Missouri, Avery Ala Drake

Masters Theses

"Purpose of investigation: The purpose of this investigation is to attempt to determine the influence that joints exert upon the blasting of granite and if joints are induced by blasting. The problem grew out of an explosive evaluation project that was conducted by the Mining Department, Missouri School of Mines. In late May 1950, the project was moved into the granite area near Graniteville, Missouri. It became apparent upon study of this area that the jointing would have certain effects upon the results obtained. Dr. J. D. Forrester, Chairman, Department of Mining Engineering, Missouri School of Mines, Rolla, Missouri, suggested …