Engineering Commons^™

Tinkering With Theoretical Objects: Designing Theories In Scientific Inquiry, Shakayla Moran, Leslie Atkins Elliott

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

The EDISIn Project (Engineering Design in Scientific Inquiry), taught in an undergraduate teacher preparation program, is investigating where engineering design opportunities emerge within contexts of scientific inquiry, with implications for how science teachers might productively engage in engineering design in their science courses without compromising on either the science or the engineering. In some inquiries, the opportunities for engineering were obvious, particularly with respect to novel experimental designs and in developing physical representations of models. In other inquiries, however, the investigations were either largely theoretical or the experimental designs were readily developed without a need for deliberate attention to design …

Using Schema Training To Facilitate Students' Understanding Of Challenging Engineering Concepts In Heat Transfer And Thermodynamics, Dazhi Yang, Ruth Streveler, Ronald L. Miller, Inanc Senocak, Jim Slotta

Educational Technology Faculty Publications and Presentations

Background: Chi and colleagues have argued that some of the most challenging engineering concepts exhibit properties of emergent systems. However, students often lack a mental framework, or schema, for understanding emergence. Slotta and Chi posited that helping students develop a schema for emergent systems, referred to as schema training, would increase the understanding of challenging concepts exhibiting emergent properties.

Purpose: We tested the effectiveness of schema training and explored the nature of challenging concepts from thermodynamics and heat transfer. We investigated if schema training could (a) repair misconceptions in advanced engineering students and (b) prevent them in beginning engineering students. …

Breaking Down The Silos: Innovations For Multidisciplinary Programs, Jillana Finnegan, Donna C. Llewellyn

University Author Recognition Bibliography: 2020

Universities, colleges and academic departments acknowledge the need for more collaborative, multidisciplinary, entrepreneurial, and global education. Unfortunately, this is no trivial task. Centuries of tradition have produced institutional silos, reinforced by layers of policy and cultural differences between academic departments, between colleges, and between academic and non-academic units. Successful multidisciplinary programs require programmatic and administrative innovation that meet faculty, student and institutional needs and leverage available resources. The Vertically Integrated Project (VIP) model, in place at thirty-seven institutions, has achieved notable success in these areas. This paper profiles innovations from ten VIP Programs in three areas: institutional organization, program organization, …

Work In Progress: Development Of A General Education First-Year Design Course, Courtney Hollar, Sondra M. Miller

Civil Engineering Faculty Publications and Presentations

We discuss in this Work in Progress paper the development of a new first-year engineering course at Boise State University. ENGR 180 Communication in Design Thinking, was developed in order to emphasize the importance of communication throughout the design process. Communication with the client at the start of the design process occurs in order to understand the problem to be solved. The team and other stakeholders continuously communicate in order to work toward developing a prototype to solve the problem. The ability to effectively communicate is equally as important to the design of the final product. The development of ENGR …

What Is The Derivative Of Music?, Thad B. Welch, Cameron H.G. Wright, Michael G. Morrow

Electrical and Computer Engineering Faculty Publications and Presentations

In our continuing effort to prove to students that Signals & Systems is not just another mathematics course taught by the ECE Department, we ask the question, “What is the Derivative of Music?”

The first-order difference (or first-difference) is an incredibly simple algorithm that very accurately approximates the numeric derivative operator, especially for oversampled signals. Its inverse also accurately approximates the numeric integration operator, but not without numeric difficulty.

Given a real-time demonstration using winDSK8, we can now show students that these mathematical operators provide powerful signal processing filtering tools for real-world signals.

During this ASEE session, we will include …

Lasting Impacts Of A Summer Bridge And Outdoor Experience Program On Student Relationships: A Social Network Analysis, Noah Salzman, Ann E. Delaney, Catherine Rose Bates, Donna C. Llewellyn

Electrical and Computer Engineering Faculty Publications and Presentations

In this Complete Research paper, we present a social network analysis of an academic summer bridge and outdoor experience program designed to support the social and academic integration of incoming STEM majors at Boise State University. Summer bridge programs can support students through both the development of academic skills and the creation of intentional community and peer support networks which can facilitate students’ sense of belonging in both their chosen major and at the university. Alumni from the past five years of the program received a survey asking them to indicate their connections to other participants, faculty, and staff associated …

Developing And Applying Knowledge And Skills In Ethics And Professional Morality: An Evidence-Based Practice Paper, Donald Winiecki, Lynn Catlin, Harold Ackler

Organizational Performance and Workplace Learning Faculty Publications and Presentations

Even without a focused interest in the topic, as we enter the third decade of the 21st Century one would have a difficult time ignoring the steady flow of stories reporting tragic consequences arising from engineering decisions that appear to have omitted ethical components, and of ethical dilemmas arising from contemporary engineering and computer science. Similarly, one would have to be willful to miss an equally steady drumbeat of calls for improved ethics in engineering and computer science education.

However, one can make the argument that simply offering new or more content related to ethics in engineering education is not …

Student Perception Of Mathematical Modeling Before And After Completing A Two Joint Robot Computer Simulation Task (Rtp), Laurel Johnston, Noah Salzman

Electrical and Computer Engineering Faculty Publications and Presentations

Engineers frequently utilize computer simulation as part of their design processes to model and understand the behavior of complex systems. Simulation is also an important tool for developing students’ understanding of modeling and strengthening their intuition for problem solving in complex domains. This project uses a two-joint robot arm problem and accompanying computer simulation to demonstrate to AP BC Calculus students how and why we would use calculus concepts simultaneously in Cartesian and polar coordinate systems. We developed the simulation in a way that allows students to experience mathematical modeling in an applications-based engineering context. A small cohort of students …

Revolutionizing The Mechanical Engineering Undergraduate Curriculum, Shelby Ann Mcneilly, Krishna Pakala, Donald Plumlee

Mechanical and Biomedical Engineering Faculty Publications and Presentations

As the age of technological advancement and occupational opportunity continues to progress, companies must be constantly adjusting and transforming in order to accommodate industry demands. With these quickly developing requirements comes an expectation of employee experience and skill sets. For individuals seeking a career in mechanical engineering, moving forward with the tools necessary for success in this continuously evolving world begins with higher education. This paper is the first of a three-part series to report on the progress of Boise State University’s Mechanical and Biomedical Engineering Department’s mission to implement a revolutionized curriculum in their academic program. This paper will …

Integrating Professional Skills And Leadership Into An Undergraduate Engineering Program, Harold Ackler, Heidi Reeder, Abbey Louie

Materials Science and Engineering Faculty Publications and Presentations

Research and practical experience indicate that leadership and “people skills” play an important role in the success of organizations and in the careers of employees across many industries, including engineering. The Micron School of Materials Science and Engineering at Boise State University identified a need to expand available opportunities for its students to develop these critical “soft” skills. The approach taken sought to imitate how such training is conducted in the workplace, integrating it within a context of extended team-based projects. In partnership with the College of Innovation + Design’s Leadership Certificate Program, a series of sequential modules were developed …

Faculty Perspectives On The Impact Of Virtual Office Hours In Engineering Courses, Brooke-Lynn Caprice Andrade, Krishna Pakala, Diana Bairaktarova, Douglas Hagemeier, Harish Subbaraman

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Instructor-student interaction is an important element of a course design, but office hours can be challenging to attend based on students’ commitments. They have time and space limitations that prevent students from getting the help they need and often garner poor attendance. Virtual office hours can address issues related to low attendance and provide a low stakes environment where unhindered learning can happen. Virtual office hours are flexible, yield productive interactions, and all enrolled students can participate. This study reports on three engineering instructors’ perspectives on the efficacy of virtual office hours compared to the traditional face-to-face interactions with the …

Review Of Living Learning Communities And Their Impact On First Year Engineering College Students, Samantha Schauer, Krishna Pakala, Kim M.B. Tucker

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Traditionally, first-year college students do not have a community of like-minded peers with whom they are able to learn. Adding to first-year engineering college students’ (FYECS) struggles is the fact that many students do not have a mentor in their related field and are unable to start building their professional repertoire, network, and/or practical skills. Living Learning Communities (LLC) can offer a platform for postsecondary institutions to increase recruitment, engagement, and sense of belonging for students who live in an LLC. LLCs have been described in the literature as themed living and learning communities where students take a common course(s), …

A Mobile Learning Community In A Living Learning Community: Perceived Impact On Digital Fluency And Communication, Devshikha Bose, Krishna Pakala, Lana Grover

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Though mobile devices like smartphones, tablets, and tablet computers have an immense potential for improving student learning, there is little empirical research which reports ways in which students actually use these technologies for learning, especially in fields like Engineering. Based on a social-constructivist approach to learning, the purpose of this mixed methods study was to investigate student perceptions regarding changes in mobile device based digital fluency and communication, after participation in a Living Learning Community (LLC) based Mobile Learning Community. This study contributes to existing literature in the field in that it reports student perceptions of how mobile devices can …

Using Technology To Support Student Learning In An Integrated Stem Learning Environment, Dazhi Yang, Sally J. Baldwin

Educational Technology Faculty Publications and Presentations

This paper provides the first review and illustration of technology-use strategies for supporting student learning in different integrated science, technology, engineering, and mathematics (STEM) learning environments. An integrated STEM learning environment may focus on integrating and learning science and mathematics or integrating and learning engineering and technology simultaneously for multiple levels of learners. An integrated STEM learning environment breaks down disciplinary boundaries and allows students to apply multidisciplinary knowledge in solving problems. This study illustrates four technology-use strategies to support student learning in an integrated STEM learning environment: a) providing authentic learning contexts, b) offering web-based inquiry environments, c) expanding …

Elementary School Student Development Of Stem Attitudes And Perceived Learning In A Stem Integrated Robotics Curriculum, Yu-Hui Ching, Dazhi Yang, Sasha Wang, Youngkyun Baek, Steve Swanson, Bhaskar Chittoori

Educational Technology Faculty Publications and Presentations

Robotics has been advocated as an emerging approach to engaging K-12 students in learning science, technology, engineering, and mathematics (STEM). This study examined the impacts of a project-based STEM integrated robotics curriculum on elementary school students’ attitudes toward STEM and perceived learning in an afterschool setting. Three elementary school teachers and 18 fourth to sixth graders participated in an eight-week-long program. Quantitative and qualitative data were collected and analyzed, and showed students’ attitudes toward math improved significantly at the end of the robotics curriculum. Three specific areas of learning were identified, including STEM content learning and connection, engagement and perseverance, …

Using Reflection To Facilitate Writing Knowledge Transfer In Upper-Level Materials Science Courses, Jennifer C. Mallette, Harold Ackler

English Literature Faculty Publications and Presentations

When students enter upper-level engineering courses, they may bring with them unclear or inconsistent approaches to writing in engineering. Influenced by their past experiences with writing, students encountering engineering genres such as reports and proposals may struggle to write successfully. They may struggle in part because of the messiness inherent in writing knowledge transfer: a student who successfully completed freshman composition may still be unable to transfer skills, habits of mind, and approaches to writing from that setting to engineering because the rhetorical situations look drastically different. Yancey, Robertson, and Taczak define transfer as a “dynamic rather than a static …

Voices Of Our Students: Using Evidence-Based Methods To Inform A Multidisciplinary Engineering Program Design, Vicki Stieha, Noah Salzman, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Listening carefully to our students and integrating the variables that matter to them is a step that we can take to increase the number of women and underrepresented minority graduates in engineering. This paper shares an evaluative case study as we report findings from data gathering tools guiding our continuous improvement process. The findings illuminate students’ perceptions of their engineering design course and curriculum. We conclude by discussing the pedagogical decisions the teaching team is making as a result of listening to our students’ voices.

Review Of Educational Technology: Closing The Gap Between Modern Technology And The College Engineering Classroom, David Pinkerton, Krishna Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

This paper aggregates information from past and current studies regarding the implementation of technology in engineering classrooms and identifies the most promising ideas, technologies, and techniques. This paper provides insight into best practices for implementing technologies to improve the education of engineering students. This paper provides recommendations to adopt non-traditional teaching methods. Educational tools and techniques are evaluated on the basis of: Adoption and Assimilation, Access, Community, Intellectual Presence, Student Perception, and Development of Social and Professional Skills. Best practices are highlighted with descriptions of the technologies and techniques that were found most promising.

Work In Progress: Institutional Context And The Implementation Of The Redshirt In Engineering Model At Six Universities, Ann Delaney, Donna C. Llewellyn, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

Low-income students are underrepresented in engineering and are more likely to struggle in engineering programs. Such students may be academically talented and perform well in high school, but may have relatively weak academic preparation for college compared to students who attended better-resourced schools. Four-year engineering and computer science curricula are designed for students who are calculus-ready, but many students who are eager to become engineers or computer scientists need additional time and support to succeed. The NSF-funded Redshirt in Engineering Consortium was formed in 2016 as a collaborative effort to build on the success of three existing “academic Redshirt” programs …

The Redshirt In Engineering Consortium: Progress And Early Insights, Janet Callahan, Donna C. Llewellyn, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from lowincome backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSPs), …

Encouraging A Growth Mindset In Engineering Students, Megan Frary

Materials Science and Engineering Faculty Publications and Presentations

A person’s “mindset” guides a great deal of how one approaches life -- and especially how students approach education. While someone with a fixed mindset believes that their intelligence is fixed and unchangeable, someone with a growth mindset believes that their intelligence is changeable and can grow as they learn more. Most people’s mindset lies along a spectrum with these two extremes at either end. In addition to other outcomes, the mindset that a person has determines how they interpret mistakes they make; whereas someone with a fixed mindset thinks mistakes result from their innate lack of ability, someone with …

Second Year Of Using The Sidekick Basic Kit For Ti Launchpad With Elementary School Students, Tara N. Kimmey, Cameron H.G. Wright, Thad B. Welch

Electrical and Computer Engineering Faculty Publications and Presentations

This paper describes a second year, follow-on study in which 4^th and 5^th grade students were exposed to engineering-related topics using a microcontroller, input/output circuitry, sensors, and the associated software coding needed to achieve a desired functionality of the hardware. The first year study was described in a paper presented at the 2017 ASEE Annual Conference. This second year study took students to the “next level,” and showed very promising results.

Redshirt In Engineering: A Model For Improving Equity And Inclusion, Donna C. Llewellyn, Ann Delaney, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from low-income backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSP), …

The Design And Implementation Outcome Of An Online Undergraduate Thermodynamics Class, Dazhi Yang, Krishna Pakala

Educational Technology Faculty Publications and Presentations

Online learning is not common for most undergraduate core engineering courses. However, the growing need for online engineering courses necessitates the design and delivery of online courses that can allow for the flexibility and convenience the distance learning experiences can offer. Thermodynamics is among the most difficult engineering subjects to teach, especially online, where instructors are unable to demonstrate the overwhelming number of equations and applications as they would in face-to-face lectures. This paper describes the design and development of an online, undergraduate thermodynamics class. It reports the implementation outcome of student final course grade and the students’ learning experience …

Calculus Reform: Increasing Stem Retention And Post-Requisite Course Success While Closing The Retention Gap For Women And Underrepresented Minority Students, Doug Bullock, Janet Callahan, Jocelyn B. S. Cullers

Mathematics Faculty Publications and Presentations

Boise State University (BSU) implemented an across-the-board reform of calculus instruction during the 2014 calendar year. The details of the reform, described elsewhere (Bullock, 2015), (Bullock 2016), involve both pedagogical and curricular reform. Gains from the project have included a jump in Calculus I pass rate, greater student engagement, greater instructor satisfaction, a shift toward active learning pedagogies, and the emergence of a strong collaborative teaching community. This paper examines the effects of the reform on student retention. Since the curricular reform involved pruning some content and altering course outcomes, which could conceivably have negative downstream impacts, we report on …

Establishing Doctoral Programs In Electrical Engineering, Materials Science And Engineering, And Computing In An Emerging Research Institution: Lessons Learned And Best Practices, Janet Callahan, Cheryl B. Schrader, Darryl P. Butt, Timothy Anderson, Tammi Vacha-Hasse, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Over the past decade, three doctoral programs have been launched at Boise State University. The first doctoral program established was in Electrical and Computer Engineering, selected because of the need for a trained workforce in the region. The other two doctoral programs, Materials Science and Engineering, and Computing, were from the start designed as interdisciplinary degree programs. That is, they were designed for the participation of not just program faculty within the division, but for the participation of program faculty with related research interests in other departments at the university. This paper presents the steps taken to launch the programs, …

Ten Years Later: Where Are They Now?, Janet Callahan, Donna C. Llewellyn, Vicki Stieha, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

This paper explores the educational and career trajectories of the alumnae of an outreach activity for girls. The outreach activity was originally developed using an integrated marketing approach to attract girls into engineering programs.¹ The program, a two day, overnight experience for rising 9^th, 10^th and 11^th grade girls, focuses on showcasing engineering as an exciting, creative activity, including activities developed from that perspective. Started in 2005 and held annually since then, a total of over 500 girls have participated, with approximately 85% of them coming from Boise State University’s immediate metropolitan area. Facilitated by …

Listening And Negotiation Ii, Adjo A. Amekudzi-Kennedy, Kevin D. Hall, Trevor Scott Harding, Amy J. Moll, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

This paper is based on a panel held in June, 2017 in Columbus, Ohio, jointly sponsored by the Women in Engineering Division and by the Minorities in Engineering Division. It is focused on negotiation, with an emphasis on providing practical strategies that are relevant in an academic setting. The panel featured academic leaders at multiple levels, including professor, chair and dean, from diverse engineering institutions, ranging from teaching-centric to heavily research-focused. Panelists discussed strategies for negotiation, with an emphasis on an approach that meets the interests of both parties to the extent possible. The panel was administrated with an opening …

Longitudinal Success Of Calculus I Reform, Doug Bullock, Kathrine E. Johnson, Janet Callahan

Mathematics Faculty Publications and Presentations

This paper describes the second year of an ongoing project to transform calculus instruction at Boise State University. Over the past several years, Calculus I has undergone a complete overhaul that has involved a movement from a collection of independent, uncoordinated, personalized, lecture-based sections, into a single coherent multi-section course with an activelearning pedagogical approach. The overhaul also significantly impacted the course content and learning objectives. The project is now in its fifth semester and has reached a steady state where the reformed practices are normative within the subset of instructors who might be called upon to teach Calculus I. …

The Impact Of Volunteering At A Girls Outreach Activity On Community Formation, Donna C. Llewellyn, Janet Callahan, Amy J. Moll, Catherine Rose Bates

Materials Science and Engineering Faculty Publications and Presentations

This paper is focused on exploring the motivation for volunteering at an engineering outreach activity. The outreach activity itself involved a two day, overnight experience for 9th and 10th grade girls that started in 2005, and which has been held annually since that time. The outreach event takes place in Boise, Idaho, and at the time of its onset was the only outreach or camp activity in the state focused on girls or young women. Across ten years, 510 total girls have participated, with approximately 85% of them coming from the immediate metropolitan area. The program was developed with a …