Engineering Commons^™

A Pilot Sexual Device Adaptation Project For Occupational Therapy Students: A Skills-Based Approach To Teaching Sexual Activity As An Adl Through Assistive Technology, Benjamin E. Canter, Zoe M. Loitz, Victoria E. Richardson, Tatiana B. Pontes, Leanna Katz, Kevin Berner, Pedro Htq Almeida

Journal of Occupational Therapy Education

Despite being categorized as an activity of daily living since the first edition of the Occupational Therapy Practice Framework, no Accreditation Council for Occupational Therapy Education (ACOTE) standards exist to provide guidance on teaching occupational therapy students about sexual activity as an activity of daily living (ADL). When discussed, sexual activity is usually taught via didactic lecture, but is a subject that would benefit from a skills-based approach to teaching. This pilot pedagogical exercise in a two-credit assistive technology class taught occupational therapy students to address the ADL of sexual activity with clients by having students adapt a sexual toy …

Engineering Skills And Competences For A More Sustainable World, Dunja Olbina, Bogdan Buzatu, Ljilana Kheirawi, Maria Domaltova

Research Papers

In 2015, the member states of the United Nations agreed that the ideal vision of the world should be achieved by 2030. Halfway through the efforts to reach that vision, and considering the environmental issues we are surrounded by, the need for Higher Education to further incorporate sustainability topics into the curriculum is noticeable.

This paper presents the outcomes of the research through which we aim to make an impact on Higher Education institutions and the ways they are educating and raising awareness on sustainability-related topics. It presents an analysis of the data collected through a survey and focus groups, …

Editor's Forward, James Hutson

International Journal of Emerging and Disruptive Innovation in Education : VISIONARIUM

No abstract provided.

Simulating Function Generators And Oscilloscopes In A Virtual Laboratory Environment, Yiyang Li, Yuzhong Shen, Charles I. Sukenik

Modeling, Simulation and Visualization Student Capstone Conference

This paper discusses the development of a virtual laboratory for simulating electronic instruments commonly used in science and engineering courses, such as function generators and digital storage oscilloscopes. Mathematical equations are used to represent continuous signals and ensure signal integrity, while C# delegates are adopted to enable communication between simulated devices. The approach allows for loose coupling between software components and high cohesion of individual components, and can be applied to other virtual laboratory developments. The virtual laboratory provides a means for students to gain hands-on experience with electronic instruments and improve their understanding of theoretical concepts.

Extracting A Body Of Knowledge As A First Step Towards Defining A United Software Engineering Curriculum Guideline, Anton Kiselev

Doctoral Dissertations and Master's Theses

In general, the computing field is a rapidly changing environment, and as such, software engineering education must be able to adjust quickly to new needs. Industry adapts to technologies as fast as it can, but the critical issue is a need for recent graduates with the necessary expertise and knowledge of new trends, technologies, and practical experience. The industries that employ graduates of computing degree programs aim to hire those who are familiar with the latest technical traits, tools, and methodologies to meet these needs, and the software engineering curriculum needs to respond quickly to these needs. Still, unfortunately, software …

Exploring The Application Of Chatgpt In Mechanical Engineering Education, Joan Puig-Ortiz, Rosa Pàmies-Vilà, Lluïsa Jordi Nebot

Practice Papers

The use of language models such as ChatGPT in the field of engineering has gained popularity in recent years due to their ability to assist engineers in their projects and tasks. In this study, we evaluated the effectiveness of ChatGPT in supporting students' learning in the Mechanism and Machine Theory (MMT) subject. The study involved participants who were asked to interact with ChatGPT to obtain concept clarification and factual information related to MMT.

Our results show that the majority of participants were familiar with ChatGPT and had used it for academic or technical questions. They also found it easy to …

Defining A European Engineer Profile Within A European University Alliance, Morris Villarroel, Nilüfer Ülker, Pascal Bigey, Pierre Bertrand, Ramón Martínez, Sophie Griveau, Philippe Barboux, Alberto Garrido

Practice Papers

The world needs more engineers and Europe provides a rich and diverse environment to train them, including shared values of sustainability and interculturalism. In this paper we attempt to build a profile for a “European engineer” based on skills and competences acquired in a European University Alliance centred around engineering education (EELISA, European Engineering Learning Innovation Alliance). We carried out an on-line survey for students and staff of partner universities as well as nine indepth interviews (50 min) with relevante stakeholders. The questions included in the survey are described as well as general results from 75 respondents. The overall results …

Comparing The Meaning Of ‘Thesis’ And ‘Final Year Project’ In Architecture And Engineering Education, Rahman Tafahomi, Shannon Chance

Articles

Architectural education shares much in common with engineering, including the use of a culminating capstone experience in the final year. The form of this experience varies, with the research-based thesis and final-year project being most common. This paper explores the literature on traditions of enquiry and the meaning of research in various fields and the evolution of the ‘thesis’ and ‘final year project’ approaches over time. It then briefly summarises empirical research conducted on a case study institution struggling to bridge gaps in understandings of these distinct forms of learning and teaching. Throughout, the paper presents a comprehensive set of …

Integration Of Omnet++ Into A Networking Course In An Electrical Engineering Technology Program, Murat Kuzlu, Brian Emmanuel Tamayo, Salih Sarp, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Networking courses are an integral part of electrical engineering technology programs as the majority of electronics in the modern day are required to communicate with each other. They are also getting more attention in manufacturing engineering technology programs because of the development of emerging technologies in Industry 4.0 arena. From laptops, computers, cellphones, modern day vehicles and smart refrigerators, these devices require a certain level of networking in order to communicate with other devices, whether it be locally, or even across the other side of the world. The objective of networking courses in an electrical engineering program is to demonstrate …

Climate Justice In Engineering Education, Tyler J. Morgan, Donna Riley, Caroline M. Camfield

Discovery Undergraduate Interdisciplinary Research Internship

The goal of this research is to design a learning module for Purdue first-year engineering (FYE) students to learn climate fundamentals, and the role of engineers in responding to climate justice challenges. There is a lack of climate material within these classes currently, leading to a lack of climate conscious engineers in the future. The project entailed reviewing and synthesizing a wide variety of previous research on climate change education in engineering, including key learning objectives and their assessment. Because one of the key foci of the first-year engineering sequence relates to data analysis and management, we focused our work …

3 Stem Projects By Fares Soliman, Fares Soliman

STEM Month

My name is Fares Soliman. I am a fourth grade student from John Hill School Boonton NJ. I created a 3 STEM project. The first project that I made was a doll. I used pink yarn for the dress and brown yarn for the hair. I also used a round wooden ball for the face. The second project that I created was a diorama of a farm. I put some grass, trees, a barn, hay sticks, some animals, a bridge, a fence, some plastic food and corn for the crop. My third project was a diorama of a park. It …

A Socio-Ecological, Multi-Stakeholder Investigation Of Apprenticeship Training Engagement In The Irish Construction Industry, Eoghan Ó Murchadha

Doctoral

The construction industry in Ireland is crucial to the national economy, not just in terms of economic output, but as a major provider of employment. The construction labour market is a complex concatenation of professions relying upon adequate skills supply. Apprenticeships play a critical role in future skills provision and are thus vital to the successful implementation of strategic government targets such as the National Development Plan 2021-2030. However, the extant employer-led model of skills engagement is prone to labour market failure given the cyclical elasticity of the industry. Nonetheless, there is a paucity of research into apprenticeship engagement …

Stem For All Showcase Report, Bruce G. Bukiet, James M. Lipuma

STEM Month

This article and the associated STEM for all showcase submission video (https://www.youtube.com/watch?v=Clps427rdDc) was presented at the NSF 2021 STEM FOR ALL COVID, Equity & Social Justice Conference, May 11-18.

This article provides a description of the development of the STEM in your Home project in the STEM for Success initiative.

Snr: Software Library For Introductory Robotics, Spencer F. Shaw

Master's Theses

This thesis introduces "SNR," a Python library for programming robotic systems in the context of introductory robotics courses. Greater demand for roboticists has pressured educational institutions to expand robotics curricula. Students are now more likely to take robotics courses earlier and with less prior programming experience. Students may be attempting to simultaneously learn a systems programming language, a library API, and robotics concepts. SNR is written purely in Python to present familiar semantics, eliminating one of these learning curves. Industry standard robotics libraries such as ROS often require additional build tools and configuration languages. Students in introductory courses frequently lack …

Design Of An Affordable Rotating Drum Electrospinner For Classroom Education, Peder Solberg

The Journal of Undergraduate Research

Electrospinning is a technology used to generate small fibers down to nano-scale size. This method of fiber creation has been around for many years. However, in recent years electrospinning has found increased applications, especially in the area of tissue engineering due to its ability to create fibers with properties similar to the extracellular matrix in tissue. An electrospinning platform can illustrate concepts of engineering, electro-mechanical system design, manufacturing, and biomedical applications in one single package. Hence, it provides an excellent opportunity to integrate into secondary (middle and high school) and post-secondary (undergraduate) technology education.

Furthermore, just as integration of 3D …

Broadening Participation Research Project: Charting A Path To Transdisciplinary Collaborative Design, Mason Andrews, Mujde Erten-Unal, Carol L. Considine

Civil & Environmental Engineering Faculty Publications

The National Climate Assessment has identified foundational cross-cutting research capabilities that need to be developed for climate and global change assessment that include the integration of disciplines across approaches and building capacity for climate assessment that includes training, education and workforce development. The NSF HBCU Research Project, Broadening Participation Research Project: Charting a Path to Transdisciplinary Collaborative Design builds on the work of the Coastal Community Design Collaborative, a partnership between Hampton University, and Old Dominion University, which is a cross-university, cross-disciplinary program, in which architecture and civil engineering and technology students develop real world interventions for communities impacted by …

Mechatronics Education At Kettering University: Development Of Learning- Specific Hardware And Software, Jeffrey Hargrove, Theodore J. Stokes

Jeffrey Hargrove

A series of learning-specific electronic circuit boards and associated software has been developed to support mechatronics education in the Mechanical Engineering Department at Kettering University. The boards are designed to interface to the Toshiba TLCS-900H Microprocessor Trainer and Evaluation Board. The purpose of these boards is to provide mechanical engineering students of mechatronics with robust hardware that readily permits interfacing of sensors and actuators to microcontrollers used in mechatronic applications. Further, the boards feature signal conditioning circuits for use in conjunction with sensors, and driver circuits for operating high-current actuating devices. Supporting software has been written to permit ready use …

Debugging: The Key To Unlocking The Mind Of A Novice Programmer?, Anthony A. Lowe

School of Engineering Education Graduate Student Series

Novice programmers must master two skills to show lasting success: writing code and, when that fails, the ability to debug it. Instructors spend much time teaching the details of writing code but debugging gets significantly less attention. But what if teaching debugging could implicitly teach other aspects of coding better than teaching a language teaching debugging? This paper explores a new theoretical framework, the Theory of Applied Mind for Programming (TAMP), which merges dual process theory with Jerome Bruner’s theory of representations to model the mind of a programmer. TAMP looks to provide greater explanatory power in why novices struggle …

Adapting The Surveying Curriculum To New Dimensions Of The Profession, Fahria Masum, Reinfried Mansberger, Audrey Martin, Gerhard Navratil, Anthony Mushinge

Articles

Today the surveying profession is very different from what it was twenty years ago. Recent technological innovations, globalization, and global land-related challenges have allowed a wide range of advances in the surveying profession. The vision is to promote surveying practices that can enhance the quality of services in a variety of tracks in the land profession. According to the new adjacent professional areas and the needs of the labor market, academic courses for surveyors have to be adapted to meet the broader scope of the surveying profession and to supply highly qualified land professionals. This paper outlines the new challenges …

Big Five Technologies In Aeronautical Engineering Education: Scoping Review, Ruth Martinez-Lopez

International Journal of Aviation, Aeronautics, and Aerospace

The constant demands that technology creates in aerospace engineering also influence education. The identification of the technologies with practical application in aerospace engineering is of current interest to decision makers in both universities and industry. A social network approach enhances this scoping review of the research literature to identify the main topics using the Big Five technologies in aerospace engineering education. The conceptual structure of the dataset (n=447) was analyzed from different approaches: at macro-level, a comparative of the digital technology identified by cluster analysis with the number of co-words established in 3 and 8 and, a keyword central structure …

Infographic: Enhancing Engineering Students’ Communication Skills Through A Team-Based Graphics Course Project, Leroy Long Iii, Kari L. Jordan, William Wanyagah

Publications

This infographic supports the article Enhancing Engineering Students’ Communication Skills through a Team-Based Graphics Course Project which can be accessed here: https://commons.erau.edu/asee-edgd/conference70/papers-2016/5/

Using Offline Activities To Enhance Online Cybersecurity Education, Sarah Padlipsky

Master's Theses

Since the beginning of the 21st century, the United States has experienced the impact of a technological revolution. One effect of this technological revolution is the creation of entirely new careers related to the field of technology, including cybersecurity. Continued growth in the cybersecurity industry means a greater number of jobs will be created, adding to the existing number of jobs that are challenging an under-educated and under-trained workforce. The goal of this thesis is to increase the effectiveness of cybersecurity education. This thesis studies whether an online course in cybersecurity can be enhanced by offline, in-person activities that mirror …

An Experimental Comparison Of Student Motivation Between Two Computational Thinking-Based Stem Activities: Vex-Based Automation And Robotics And A Quadcopter Activity, Cory J. Ortiz

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this study was to compare student motivation between two junior high level computational thinking based STEM curricular activities. These two activities were a newly developed quadcopter based curriculum and a VEX based curricular activity developed for Project Lead the Way’s Gateway to Technology – Automation and Robotics course. Student motivation was assessed using an assessment called My Class Activities which broke motivation into four constructs: interest, challenge, choice, and enjoyment.

This study assessed students in three schools in a northern Utah school district. Students were assessed after receiving each curriculum. Assessment responses were then coded and analyzed. …

Growing Entrepreneurial Mindset In Interdisciplinary Student Engineers: Experiences Of A Project-Based Engineering Program, Elizabeth Pluskwik, Eleanor Leung, Andrew Lillesve

Integrated Engineering Department Publications

Engineering education models have recently embraced the entrepreneurial mindset as a desired outcome of undergraduate engineering education. Interdisciplinary active learning strategies have been suggested as an effective pedagogy for engaging student engineers in undergraduate engineering education. Recent research suggests that active, social learning in context can lead to improvements in learner innovation, problem-solving, curiosity, retention and accessibility of knowledge, value-creation, and other desired learning outcomes. Much of the recent adoption of active and collaborative learning, self-directed learning, problem-based and project-based learning (PBL), peer to peer learning, and other similar learning strategies are aimed at developing innovative and entrepreneurial mindset skills, …

A Retention Model For Community College Stem Students, Jennifer Snyder, Elizabeth A. Cudney

Engineering Management and Systems Engineering Faculty Research & Creative Works

The number of students attending community colleges that take advantage of transfer pathways to universities continues to rise. Therefore, there is a need to engage in academic research on these students and their attrition in order to identify areas to improve retention. Community colleges have a very diverse population and provide entry into science, technology, engineering, and math (STEM) programs, regardless of student high school preparedness. It is essential for these students to successfully transfer to universities and finish their STEM degrees to meet the global workforce demands. This research develops a predictive model for community college students for degree …

Sustainability Children's Book, Linden Cheek

Biological and Agricultural Engineering Undergraduate Honors Theses

As human driven climate change continues to alter our planet, persuading the general public to adopt sustainable living practices has become increasingly important. Storytelling has long been a part of human culture, and recent studies have emphasized the power of storytelling to influence the audience as a means of changing behavior. This project attempted to teach sustainable principles to primary school children through the creation of a scientific children’s book. The book communicated the maxim of “reduce, reuse, recycle” by tracing a fictitious story of a town where children frequently buy new toys and throw the old toys away. The …

Automated Control System Design Manual For Plant Growth And Support, Brooke Benham

Biological and Agricultural Engineering Undergraduate Honors Theses

The “Automated Control System Design Manual for Plant Growth and Support” project contains a teaching manual for high school students and teachers to use to aid in teaching STEM subjects. Building confidence in students and encouraging the pursuit of STEM related fields is one of the primary functions. This project utilizes low cost instruments and freely available software to teach the construction, installation, programming, and application for an automated control system with emphasis on plant growth and regulation. The end result is a fully automated system that can be controlled wirelessly via an android application to monitor temperature, humidity, and …

Logic Tiles, Andrew Wheeler, Tristan Lennertz

Computer Engineering

This project was originally conceived by Professor Andrew Danowitz as he considered the restructuring of the introductory digital design course at Cal Poly. As it stands now, students apply their knowledge of boolean algebra and combinatorial logic through the programming of a Field Programmable Gate Array (FPGA) using a Hardware Descriptive Language (HDL). While this is the industry standard for designing large, complex digital circuits, and is an fundamental skill to learn, there is a lack of actual circuit building in the process that can cause a disconnect from theory to application for students who have little-to-no experience with digital …

Code Decomposition: A New Hope, Nupur Garg

Master's Theses

Code decomposition (also known as functional decomposition) is the process of breaking a larger problem into smaller subproblems so that each function implements only a single task. Although code decomposition is integral to computer science, it is often overlooked in introductory computer science education due to the challenges of teaching it given limited resources.

Earthworm is a tool that generates unique suggestions on how to improve the decomposition of provided Python source code. Given a program as input, Earthworm presents the user with a list of suggestions to improve the functional decomposition of the program. Each suggestion includes the lines …

On The Impact Of Android Api Evolution On Education Materials, Kennedy Owen

Master's Theses

The recent growing popularity of mobile devices has led to the establishment of several popular mobile platforms such as the Android operating system. To foster growth in this evolving market, Application Programming Interfaces (APIs) were created to enable developers to create mobile device applications that utilize mobile device features and functionality for personal or widespread commercial use. However, as a result of excessive device and API evolution, mobile development faces increasingly complex issues, including an alarmingly rapid decay of development resources.

This thesis conducts a case study around one such resource: a series of Android app development lab …