Engineering Commons^™

Amplifying New Voices And Making Space For Alternative Knowledge Systems In Engineering Curricula – The Example Of Ubuntu, Anita Occhio, Fiona Caroline Saunders, Gladson Chikwa, Dawn Theresa Nicholson

Practice Papers

Engineering projects are ubiquitous; from developing COVID-19 vaccines to building new cities and developing climate change solutions. An inclusive approach to teaching engineers how to master the complexities of engineering project management is vital to the deliverability of sustainability and net zero initiatives (Hockings 2010). Yet, our engineering curricula remain deeply rooted in Western epistemology (Winter et al. 2022, Mbembe 2015). Arguably, this is an opportune time to consider decolonising our curricula. At a fundamental level, ‘decolonising the curriculum’ means introducing previously ignored voices, images, authors, theories and arguments into our teaching (Rogers et al. 2022). This is a challenge …

Embedding Sustainability In The Engineering Curriculum: Meeting The Requirements Of Professional Accreditation, Darren Carthy, Richard Manton, Louise O' Gorman

Practice Papers

Professional accreditation agencies are increasing requirements on sustainability in engineering education as a response to ethical obligations, industry needs and emerging academic best practice. In 2021, Engineers Ireland increased sustainability requirements in new accreditation criteria. This paper reports on a thematic analysis carried out by Engineers Ireland on the self-assessment and achievement of these new accreditation criteria on sustainability. The analysis was conducted on the self-assessment reports from a large Irish University, referred to as University A hereafter. The results indicate that, for the purpose of meeting accreditation requirements, University A has interpreted sustainability in their programmes as either meeting …

Transforming Curriculums For An Age Of Multi-Modal Education: A 5-Phase Approach, Justine I. Blanford, Jeroen Verplanke

Practice Papers

The pandemic has accelerated the trend towards online and hybrid learning with many educational institutes pivoting their education to online learning environments and has subsequently transformed societal expectations. There have been many benefits associated with these changes (e.g., multi-dimensional interactions, flexibility and deep learning). As we move into more online education due to changing needs and demands from students, how best to adapt our education for multi-modal learning environments can be a challenge. Getting our education ready for a multi-modal age is bringing about disruptive changes forcing us to rethink what we teach and how we teach it. Thus, the …

A Framework For Teaching Machine Learning For Engineers, Lauren Singelmann, Jacob Covarrubias

Practice Papers

As machine learning and artificial intelligence become increasingly prevalent in our day-to-day lives, there becomes an even greater need for literacy in machine learning for those outside of the computer science domain. This work proposes a conceptual framework for teaching machine learning to engineering students with the goal of developing the knowledge and skills needed to apply machine learning techniques to engineering problems.

Many machine learning courses in computer science, math, and statistics focus on the theoretical basis of machine learning algorithms and assessment. This framework takes a fundamentally different approach by creating a course structure for machine learning practitioners …

Preparing Students To Solve Challenges Related To A Changing Climate, Mujde Erten-Unal, Dalya Ismael, Carol L. Considine

Civil & Environmental Engineering Faculty Publications

The National Academy of Engineering has identified restoring and improving urban infrastructure as one of the grand challenges for engineering. Urban coastal communities are particularly at risk as their infrastructure is experiencing frequent inundation related to climate change impacts. Rising sea levels in coastal communities create backflow into stormwater systems and deplete capacity. In addition, the increase in rainfall intensity, duration, and frequency related to climate change create additional challenges for aging infrastructure systems. To prepare students to solve these challenges, the Civil and Environmental Engineering (CEE) and Civil Engineering Technology (CET) programs at Old Dominion University (ODU) are introducing …

Overview Of Standards For Technological And Engineering Literacy (Other), Philip Reed, Tyler Love, Scott Bartholomew, Kelly Dooley

STEMPS Faculty Publications

In 2020, the International Technology and Engineering Educators Association (ITEEA) published Standards for Technological and Engineering Literacy: The Role of Technology and Engineering in STEM Education (STEL) [1]. These standards open with a clear rationale why all Pk-12 students should study technology and engineering:

Technology and engineering are pervasive in all aspects of our lives. Every human activity is dependent upon the products, systems, and processes created to help grow food, provide shelter, communicate, work, and recreate. As the world grows more complex, it is increasingly important for everyone to understand more about technology and engineering [1, p. 1].

The …

Seventh-Grade Students' Use Of Heat Transfer Conceptions During An Engineering Design-Based Stem Integration Curriculum, Emilie A. Siverling, Tamara J. Moore

Integrated Engineering Department Publications

As the integration of STEM becomes increasingly important in pre-college education, it is important to study models of STEM integration. One model, engineering design-based STEM integration, has shown promising results in terms of student science content learning. This study’s purpose was to explore one student team’s use of heat transfer conceptions as they participated in an engineering design-based STEM integration curriculum. A case study research design, along with procedures from qualitative content analysis, were used to identify scientific and alternative conceptions that the seventh-grade students communicated during the unit. The main result is that the students spoke and wrote about …

Continued Efforts In Ti Arm M4 Microcontroller Curricula Developments And Assessments Between Three Different Institutions And Programs, Steve C. Hsiung, Lijian Xu, Feng Jao, Yonghui Wang, Suxia Cui

Engineering Technology Faculty Publications

This project is a continuation in efforts to upgrade the curricula in microcontroller related courses that are facing difficulties in the disappearing and lack technical supports in hardware and software of 68XXX and 80XXX microcontrollers. Through the study of a NSF supported project "Transform the Innovated Design and Development of an Embedded Design Training System and Associated Support Curricula into a Commercial Available Product" that interviewed 130 faculty/teachers/students across the U.S. has revealed on finding newly available microcontrollers is an urgent issue in the academic communities. Based on the supports on hardware and software and function libraries, the TI ARM …

Adapting The Surveying Curriculum To New Dimensions Of The Profession, Fahria Masum, Reinfried Mansberger, Audrey Martin, Gerhard Navratil, Anthony Mushinge

Articles

Today the surveying profession is very different from what it was twenty years ago. Recent technological innovations, globalization, and global land-related challenges have allowed a wide range of advances in the surveying profession. The vision is to promote surveying practices that can enhance the quality of services in a variety of tracks in the land profession. According to the new adjacent professional areas and the needs of the labor market, academic courses for surveyors have to be adapted to meet the broader scope of the surveying profession and to supply highly qualified land professionals. This paper outlines the new challenges …

Fostering Giftedness And Creativity: Implementing Engineering By Design In Kuwait, Nathan Mentzer, Philip A. Reed, Meshari Alnouri, Mohammad Barbarji

STEMPS Faculty Publications

The article offers information on a partnership between the International Technology & Engineering Educators Association (ITEEA) and the Sabah Al Ahmad Center for Giftedness and Creativity (SACGC) to support innovation and design education. The partnership is aimed towards the implementation of the Engineering byDesign (EbD) curriculum and contribute towards building a Kuwaiti society that fosters giftedness and creativity.

Reconceptualizing Pedagogical And Curricular Knowledge Development Through Making, Steven Greenstein, Justin Olmanson

Department of Teaching, Learning, and Teacher Education: Faculty Publications

While making is typically tethered to narratives of entrepreneurship and business, it can provide a gateway to meaningful interaction and deepened understanding of both content and pedagogy. In this article we provide descriptions of two courses—one each at the pre-service and in-service levels—that engage teachers in making and design practices that we hypothesized would inform their pedagogical and curricular thinking. With a focus on the design of new tools to support teaching and learning through the use of human-centered design practices and digital fabrication technologies, these courses have teachers exploring at the intersection of content, pedagogy, and making. Specifically, they …

Leading Large-Scale Change In An Engineering Program, Cheryl Allendoerfer, Rebecca Bates, Jennifer Karlin, Ron Ulseth, Dan Ewert

Integrated Engineering Department Publications

While many efforts have been made to improve technical and professional skills in engineering graduates, there has been little comprehensive change in the pedagogy of most engineering education institutions in the U.S. Many of these efforts involve changing only one or two aspects of the curriculum, and therefore are less likely to make significant changes in the student learning outcomes. For better success, engineering curricular changes will need to address the entire education system. In order to see real, sustainable improvement in engineering education practice, both the behaviors of the participants and the systems within which these participants act must …

Ethical Reasoning Development In Project-Based Learning, Elizabeth Pluskwik, Puteri S. Megat Hamari

Integrated Engineering Department Publications

This paper will describe the method of ethics instruction in a specific project-based learning program with the aim to improve the current level of moral reasoning skills in the engineering students enrolled in the program. The Accreditation Board for Engineering and Technology (ABET) and the National Society of Professional Engineers (NSPE) have endorsed efforts to improve the teaching of ethics in the engineering curriculum. Criterion 3-f of the ABET outcomes,specifically calls for student attainment of an understanding of ethical and professional responsibility. In response, engineering educators seek to develop curriculum to improve moral reasoning skills, which should lead to increased …

A Comparison Study Of Project-Based-Learning In Upper-Division Engineering Education, Ron Ulseth, Bart Johnson, Rebecca Bates

Integrated Engineering Department Publications

A new model for engineering education was launched in January 2010 in northeastern Minnesota. The Iron Range Engineering (IRE) model is a project-based-learning (PBL) methodology that focuses on producing graduates with integrated technical and professional knowledge and competencies. A unique and important element of the IRE model has 100% of IRE student learning taking place in the context of industry projects. Students at IRE are upper-division engineering students who transferred from Minnesota community college lower-division engineering programs. To understand the impact that IRE methodology may have on preparing engineers with the competencies needed for the future workplace, a comparison study …

The Iron Range Engineering Pbl Curriculum: How Students Adapt To And Function Within Pbl, Rose M. Marra, Betsy Palmer, Ron Ulseth, Bart Johnson

Integrated Engineering Department Publications

Iron Range Engineering is a unique complete-PBL curriculum for upper division students. Rather than studying about engineering in traditional engineering courses, IRE students solve complex and ill-structured industry problems in mining, milling, and manufacturing industries. To support students’ transition to PBL and to facilitate deep approaches to learning technical and professional competencies required for the engineers of the future, faculty have created a variety of structures. This paper describes IRE’s PBL implementation and reports the results of a qualitative study of their students.

Entrepreneurship In The Iron Range Engineering (Ire) Model, Dan Ewert, Ron Ulseth, Bart Johnson, Jeff Wandler, Andrew Lillesve

Integrated Engineering Department Publications

The aim of this paper is to describe a new model for engineering education that has entrepreneurship, in its many form, as a focus. Issues involved with integrating student-based entrepreneurship into the educational process are also described.

Building A Framework For Engineering Design Experiences In Stem: A Synthesis, Cameron D. Denson

Publications

Since the inception of the National Center for Engineering and Technology Education in 2004, educators and researchers have struggled to identify the necessary components of a “good” engineering design challenge for high school students. In reading and analyzing the position papers on engineering design many themes emerged that may begin to form a narrative for engineering design in a high school setting. Before educators can provide a framework for engineering design in STEM courses, four questions need to be answered: (a) To what degree should engineering design challenges be open-ended or well-structured? (b) What are the relationships between engineering design …

Embedding Simulation Education Into The Engineering Management Body Of Knowledge, Andreas Tolk, Ghaith Rabadi, Donald N. Merino

Computational Modeling & Simulation Engineering Faculty Publications

The American Society for Engineering Management (ASEM) established a Body of Knowledge (BoK). As simulation is of growing interest to engineers in general and to engineering managers in particular, simulation is part of this documentation of domains of interest that characterise the profession. The basis for the Body of Knowledge comprises of established and accredited curricula and additional input from practitioners of the field. As it is essential to cover the basic topics and core competences as well as application specific domain knowledge, the simulation education for engineers is categorised into topics on simulation theory and simulation application.

Integrating The Study Of Technology Into The Curriculum: A Consulting Teacher Model, Thomas Erekson, Steven Shumway

Publications

Over the past 40 years there have been several initiatives by leaders in the profession to make revolutionary changes in philosophy, curriculum, methods, and facilities in the transition from industrial arts to technology education. The transition to technology education has been grounded in the dramatic changes that technology and technological innovations have brought to all aspects of society. It has been postulated that to fully participate in a technologically-based society, people must be technologically literate (Pearson & Young, 2002). Thus, the need arose to assure that all students have experience in technology education in order to acquire technological literacy.

Developing A New Program In Marine Engineering Technology, Anthony Dean, Gary Crossman, Alok Verma

Engineering Technology Faculty Publications

The Department of Engineering Technology, in the Batten College of Engineering and Technology at Old Dominion University, in conjunction with members of its advisory board and other industry representatives have begun a sustained effort to promote and develop a strong course of study in Marine Engineering Technology. Located in Norfolk, Virginia, Old Dominion University, and particularly the Department of Engineering Technology, is uniquely positioned to develop such a program. With strong ties to the world's largest Naval Base and superlative shipbuilding, maintenance and repair facilities, early qualitative research indicated high interest for development of such a program in support of …

A Comparison Between Frequent Out-Of-Class Assignments And Frequent In-Class Assessments Relative To Student Performance In A Sophomore Level Electrical Circuit Analysis Course, Isaac Flory, Christian Hearn

Engineering Technology Faculty Publications

Two parallel sections of a sophomore level circuit analysis course in Electrical Engineering Technology were structured to provide insight to the marginal utility of out-of-class assignments versus in-class assessments in academic performance. Student distributions for each section, the classroom model, the composition of the common tests and exam, and grading formats are discussed. The data presented and the conditions of the resulting observations indicate the model which favored out-of-class assignments led to improved test scores.

Air Corp Engineering School, Wright Field - 1935 Catalog, Air Corps Engineering School, A. W. Robins

AFIT Documents

This publication is issued to fill the need on the part of the Air Corps in general for a more detailed description of the curriculum of the Air Corps Engineering School. This description will serve as a guide to the accepted applicant in his preliminary preparation and a standard by which the individual Air Corps officer can arrive at an intelligent decision as to whether his own enthusiasm and preparation will be sufficient to warrant making application for the course. Entrance requirements are definitely stated herein. For those who do not contemplate intensive aeronautical engineering training, this publication may be …