Engineering Commons^™

Investigation Of Thermofluid Processes In A Pcm Based Thermal Storage Module, Luca M. Crnjac

Electronic Thesis and Dissertation Repository

Latent heat thermal energy storage systems can capture and store solar thermal energy, enhancing the reliability of solar energy by facilitating a continuous and consistent energy supply. However, phase change materials used in these systems suffer from low thermal conductivities making it difficult to achieve suitable charging and discharging rates. The present research investigated this issue using computational and experimental approaches to improve the design of a thermal storage module through heat transfer enhancement. Various heat transfer enhancements including a finned honeycomb structure, and metal wool were incorporated into a thermal storage module to analyze their effect on charging and …

Heat Pump Integrated Thermal Storage For Building Demand Response And Decarbonization, Sara Sultan

Doctoral Dissertations

This work presents a novel thermal energy storage (TES) integrated with existing residential heat pump (HP). The research focuses on controls and configuration for energy, demand, cost and carbon emissions savings for residential buildings’ energy consumption. This work will be significant in developing a framework especially for reduced energy demand and carbon emissions associated with space heating and cooling in residential buildings. Since buildings account for about 40% primary energy consumption in U.S. and half of that is associated with HP.

An existing air source HP in integrated with a phase change material (PCM) based TES via active configuration where …

Heat Transfer Characteristics Of Latent Heat Thermal Energy Storage, Kedar Prashant Shete

Doctoral Dissertations

Latent heat thermal energy storage (LHTES) systems can be used to reduce electric demand when used in conjunction with Combined Heat and Power Plants or HVAC(Heating, Ventilation, Refrigeration and Air-Conditioning), as they can regulate the demand and supply of thermal energy. They can also be used to integrate renewable energy sources with the grid. A design procedure and performance modeling is required for designing and using thermal energy storage systems effectively. We propose hypotheses about the performance of an LHTES device with different operating conditions and material properties, for devices that are governed by different modes of heat transfer. We …

Additive Manufacturing For Phase Change Thermal Energy Storage And Management, Thomas B. Freeman

Doctoral Dissertations and Master's Theses

Phase change materials can enhance the performance of energy systems by time shifting or reducing peak thermal loads. Certain electronic devices such as batteries, laser systems, or electric vehicle power electronics are highly transient and require pulse heat dissipation. Heat sinks, or thermal management devices made of a phase change material can absorb large heat spikes while maintaining a constant temperature. Additive manufacturing techniques hold tremendous potential to enable co-optimization of material properties and device geometry, while potentially reducing material waste and manufacturing time. Recently, a few efforts have emerged that employ additive manufacturing techniques to integrate a phase change …

Development Of A Computationally Efficient Method For Modelling Thermal Energy Storage In Packed Beds Of Spherically Encapsulated Phase Change Material, Colin Jaffray

Electronic Thesis and Dissertation Repository

A novel computationally efficient method for modelling melting and solidification processes in packed beds of PCM encapsulated spheres is introduced. The proposed method involves the full discretization of only one centrally located sphere to fully simulate the phase change process, while treating all other spheres in the packed bed as voids with boundary conditions derived from the simulated sphere. At each time step, the computed heat transfer parameters on the exterior surface of the simulated sphere undergoing the phase change process are extracted, and imposed as boundary conditions on surrounding spheres. The proposed method results in a significant reduction in …

Experimental And Numerical Investigation Of Lauric Acid Melting At Suboptimal Inclines, Casey J. Troxler

Doctoral Dissertations and Master's Theses

Validation experiments are the baseline for completing numerical studies for engineering design. Applications of the enthalpy-porosity model have expanded in research with the growth of new technologies such as metal additive manufacturing or the renewed interest in thermal energy storage for supplementing renewable energy. A simplified experiment examining the melting behavior of lauric acid from an isothermal surface has become a common case for validating the performance of numerical models. Several studies of this rectangular experiment have been repeatedly used as model validation in a variety of problem conditions.

The first part of this study presents experimental data for the …

Thermal Energy Storage For Load Shifting, Jordan Benton Lopez Corley, Weston Cruz Montgomery, Taylor Glenn Harms

Mechanical Engineering

The following document accounts for the progress made in the prototype development of our design solution since the Critical Design Review, and our group’s response to recent world events which greatly impacted planned activities. Our design challenge is to develop a thermal energy storage system which will sequester the energy from a photovoltaic (PV) array during the day and allow for its dispersal at night in the form of near boiling water. Looking at our user’s needs, we broke our design solution into four components: water heating, storage, distribution, and controls. Research of all components was conducted to ascertain which …

Experimental And Computational Characterization Of Sodium Nitrate @ Silica Nano Capsules For Thermal Energy Storage Applications, Wataru Hashimoto

Graduate Research Theses & Dissertations

In this investigation, a nanocapsule composed of a sodium nitrate core and a silicon dioxide shell is synthesized, characterized, and analyzed utilizing a mixture of analytical and computational tools. The sol-gel method was selected as the process of nanoencapsulation. Analytical characterization techniques employed in this investigation include differential scanning calorimetry (DSC) to measure melting temperatures and enthalpies of fusion, dynamic light scattering (DLS) to calculate particle size distributions, scanning electron microscopy (SEM) to analyze surface characteristics, transmission electron microscopy (TEM) to perform shell characterization, and energy dispersive X-ray spectroscopy (EDS) to determine chemical composition. Preliminary results indicated a decrease in …

Latent Heat Thermal Energy Storage With Embedded Heat Pipes For Concentrating Solar Power Applications, Christopher Robak

Master's Theses

An innovative, novel concept of combining heat pipes with latent heat thermal energy storage (LHTES) for concentrating solar power (CSP) applications is explored. The low thermal conductivity of phase change materials (PCMs) used in LHTES presents a design challenge due to slow heat transfer rates during heating and cooling of the material. Heat pipes act to decrease the thermal resistance in the PCM, increasing the overall heat transfer rate sufficiently for use in CSP. First, a laboratory scale experiment is presented to validate the concept of using heat pipes in LHTES to reduce thermal resistance in PCM. A commercial scale …