Engineering Commons^™

Carrier Transport Engineering In Wide Bandgap Semiconductors For Photonic And Memory Device Applications, Ravi Teja Velpula

Dissertations

Wide bandgap (WBG) semiconductors play a crucial role in the current solid-state lighting technology. The AlGaN compound semiconductor is widely used for ultraviolet (UV) light-emitting diodes (LEDs), however, the efficiency of these LEDs is largely in a single-digit percentage range due to several factors. Until recently, AlInN alloy has been relatively unexplored, though it holds potential for light-emitters operating in the visible and UV regions. In this dissertation, the first axial AlInN core-shell nanowire UV LEDs operating in the UV-A and UV-B regions with an internal quantum efficiency (IQE) of 52% are demonstrated. Moreover, the light extraction efficiency of this …

Emergence Of Coherent Backscattering From Sparse And Finite Disordered Media, Nooshin M. Estakhri, Nasim Mohammadi Estrakhri, Theodore B. Norris

Engineering Faculty Articles and Research

Coherent backscattering (CBS) arises from complex interactions of a coherent beam with randomly positioned particles, which has been typically studied in media with large numbers of scatterers and high opacity. We develop a first-principles scattering model for scalar waves to study the CBS cone formation in finite-sized and sparse random media with specific geometries. The current study provides insights into the effects of density, volume size, and other relevant parameters on the angular characteristics of the CBS cone emerging from sparse and bounded random media for various types of illumination, with results consistent with well-known CBS studies which are typically …

Development And Application Of A Design Flow For Photonic Integrated Circuits, Ifeanyi Achu

Electrical Engineering Theses and Dissertations

Silicon photonics allows for the fabrication of many optical elements on a single photonic integrated circuit (PIC). By taking advantage of the established foundry technology used in the CMOS and silicon’s high refractive index, high feature density manufacturing can be achieved in mass quantities. In CMOS fabrication, from conception of an electronic circuit to testing, the process of designing an electronic circuit is dictated by a design flow which has been developed over the course of decades. This flow includes circuit level design and simulation, layout of the circuit, layout and verification of the chip, fabrication, packaging, and testing. Given …

Orbital Angular Momentum Orthogonality-Based Crosstalk Reduction: Theory And Experiment, Unaiza Tariq

Electrical Engineering Theses and Dissertations

Full duplex communication systems allow a single channel to be used for simultaneous two-way communication, increasing spectral efficiency. However, full duplex communication systems suffer from the issue of self-interference between local transmitter and receiver antennas. Analog subtraction and signal processing methods have previously been used to reduce this problem. This dissertation proposes the use of waves carrying orbital angular momentum (OAM) to mitigate the problem of self-interference by offering a means of additional isolation between local antennas.

Orbital angular momentum has been widely studied both in the photonics and radio domain. The theoretically infinite orthogonal states of an OAM signal …

Engineering The Spectrum Of Near-Field Thermal Radiation, Saman Zare

Electronic Theses and Dissertations

Thermal emission observed at sub-wavelength distances from the thermal source is referred to as near-field thermal radiation. Thermal radiation in the near-field regime can exceed Planck’s blackbody limit by orders of magnitude and be quasi-monochromatic. Due to these unique properties, near-field thermal radiation is very promising for several thermal management and energy harvesting applications. Many of these applications, such as nanogap thermophotovoltaics and thermal rectification, require near-field spectra that are not found among natural materials. Artificial metamaterials, which are engineered at the sub-wavelength scale, have been theoretically proposed for tuning the spectrum of near-field thermal radiation. However, engineering the near-field …

Six-Dimensional Single-Molecule Imaging With Isotropic Resolution Using A Multi-View Reflector Microscope, Oumeng Zhang, Zijian Guo, Yuanyuan He, Tingting Wu, Michael D. Vahey, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Imaging of both the positions and orientations of single fluorophores, termed single-molecule orientation-localization microscopy, is a powerful tool for the study of biochemical processes. However, the limited photon budget associated with single-molecule fluorescence makes high-dimensional imaging with isotropic, nanoscale spatial resolution a formidable challenge. Here we realize a radially and azimuthally polarized multi-view reflector (raMVR) microscope for the imaging of the three-dimensional (3D) positions and 3D orientations of single molecules, with precisions of 10.9 nm and 2.0° over a 1.5-μm depth range. The raMVR microscope achieves 6D super-resolution imaging of Nile red molecules transiently bound to lipid-coated spheres, accurately resolving …

Processes & Toolchain For Automation Of Hybrid Direct-Write 3d Printing, Gilbert Thomas Carranza

Open Access Theses & Dissertations

Hybrid 3D printing has evolved from a means to rapidly prototype devices to a fully viable means of manufacturing final products. In particular, electronic and electromagnetic devices have been a focus of hybrid 3D printing multi material structures. However, while the hardware capabilities have been around for years, the software capabilities have only begun to catch up. A process and toolchain for hybrid 3D printing is critically needed.This work details a process and toolchain for hybrid 3D printing metal dielectric structures. In it, a basic slicing algorithm is shown along with off-axis printing and conformal printing for arbitrary curvatures. These …

Pioneering Concepts For 3d Electromagnetics, Cesar Valle

Open Access Theses & Dissertations

This work introduces two paradigm changing concepts that will push electromagnetics (EM) to the third dimension. The first of that work involves the introduction of the conformal Spatially Variant Lattice (SVL) algorithm that can conform any periodic structure onto arbitrary curvature. The algorithms robustness is confirmed by conforming a frequency selective surface (FSS) onto an extreme paraboloid, proving the algorithms robustness on high sloping surfaces. Three FSSs were made in total; a standard flat FSS, a projected FSS, and a FSS made through the conformal SVL algorithm. Measured results are shown and match well to simulation.Secondly, in the world of …

Data-Driven Deep Learning-Based Analysis On Thz Imaging, Haoyan Liu

Graduate Theses and Dissertations

Breast cancer affects about 12.5% of women population in the United States. Surgical operations are often needed post diagnosis. Breast conserving surgery can help remove malignant tumors while maximizing the remaining healthy tissues. Due to lacking effective real-time tumor analysis tools and a unified operation standard, re-excision rate could be higher than 30% among breast conserving surgery patients. This results in significant physical, physiological, and financial burdens to those patients. This work designs deep learning-based segmentation algorithms that detect tissue type in excised tissues using pulsed THz technology. This work evaluates the algorithms for tissue type classification task among freshly …

Reliability Enhancing Control Algorithms For Two-Stage Grid-Tied Inverters, Yuheng Wu

Graduate Theses and Dissertations

In the photovoltaic (PV) generation system, two types of grid-tied inverter systems are usually deployed: the single-stage grid-tied inverter system and the two-stage grid-tied inverter system. In the single-stage grid-tied inverter system, the input of the inverter is directly connected to the PV arrays, while an additional dc-dc stage is inserted between the PV arrays and the dc-ac inverter in the two-stage design. The additional dc-dc stage could provide a stable dc-link voltage to the inverter, which also enables new design possibilities, including the multi-MPPT operation and solar-plus-storage application. Thus, the two-stage grid-tied inverter has been widely used in the …

Optical Control System For Atmospheric Turbulence Mitigation, Martyn Lemon

All Theses

Propagation of laser light is distorted in the presence of atmospheric turbulence. This poses an issue for sensing, free-space optical communications, and transmission of power. With an ever-increasing demand for high-speed data communications, particularly between satellites, unmanned vehicles, and other systems that benefit from a point-to-point link, this issue is critical for the field. A variety of methods have been proposed to circumvent this issue. Some major categories include the manipulation of the light’s structure, an adaptive scheme at the optical receiver, scanning mirror systems, or a transmission of simultaneous signals with a goal to improve robustness.

There is an …

Oam-Based Wavelets In A High Speed Optical Probing System For Measuring The Angular Decomposition Of The Environment, Justin Free

All Theses

This thesis presents the theoretical development of orbital angular momentum (OAM) based wavelets for the analysis of localized OAM information in space. An optical probing system for generating and detecting these wavelets is demonstrated; individual wavelets can scan the environment in 10µs or less. The probing system was applied to a three-dimensional atmospheric turbulence distribution to obtain a continuous wavelet transform of the angular information of the turbulent propagation path about a fixed radius. An entire continuous wavelet transform was measured in 3.8ms; the measurements are much faster than the turbulence and give insight into the short time scale of …

Effects Of A Non-Uniform Magnetic Field On The Current Flow Of Silicon Photodiodes And Solar Cells, Jason J. Buranich

Theses and Dissertations

This research investigates an approach to improve efficiency of low-cost devices by applying an external arched magnetic field to p-n junction devices to observe the effect such a magnetic field would have on the flow of charge carriers. Electro-optic p-n junction devices of photodiodes and solar cells were designed and fabricated to incorporate the dimensions of commercially available neodymium magnets. The devices were placed in the magnetic fields created by the magnets then current and voltage characteristics were measured via a 4-point probe setup. These measurements were compared to measurements taken from the same devices when not in the magnetics …

A Patient-Specific Algorithm For Lung Segmentation In Chest Radiographs, Manawaduge Supun De Silva, Barath Narayanan Narayanan, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Lung segmentation plays an important role in computer-aided detection and diagnosis using chest radiographs (CRs). Currently, the U-Net and DeepLabv3+ convolutional neural network architectures are widely used to perform CR lung segmentation. To boost performance, ensemble methods are often used, whereby probability map outputs from several networks operating on the same input image are averaged. However, not all networks perform adequately for any specific patient image, even if the average network performance is good. To address this, we present a novel multi-network ensemble method that employs a selector network. The selector network evaluates the segmentation outputs from several networks; on …

Design Of Arbitrary Planar Optical Devices With Full Phase Control Using Nanoimprinting Of Refractive Index, Matthew Panipinto

All Theses

Planar optical devices offer a lightweight solution to the constraints found in traditional optical devices. While subwavelength patterning of optics offers attractive performance and size, traditional fabrication methods demand a trade-off between resolution and throughput that presents a significant hurdle for the widespread use of subwavelength devices. Nanoimprinting of refractive index (NIRI) is a novel fabrication method pioneered in previous work that offers promise in mitigating the throughput issues that hamstring traditional fabrication methods. However, NIRI has not been shown to impart full $2\pi$ phase control in planar optical devices, nor has a method for fabricating arbitrary designs using the …

Electro-Optical Sensors For Atmospheric Turbulence Strength Characterization With Embedded Edge Ai Processing Of Scintillation Patterns, Ernst Polnau, Don L. N. Hettiarachchi, Mikhail A. Vorontsov

Electro-Optics and Photonics Faculty Publications

This study introduces electro-optical (EO) sensors (TurbNet sensors) that utilize a remote laser beacon (either coherent or incoherent) and an optical receiver with CCD camera and embedded edge AI computer (Jetson Xavier Nx) for in situ evaluation of the path-averaged atmospheric turbulence refractive index structure parameter C-n(2) at a high temporal rate. Evaluation of C-n(2) values was performed using deep neural network (DNN)-based real-time processing of short-exposure laser-beacon light intensity scintillation patterns (images) captured by a TurbNet sensor optical receiver. Several pre-trained DNN models were loaded onto the AI computer and used for TurbNet sensor performance evaluation in a set …

Hardware Security For Wireless Communications Systems Using Antenna-Based Radio Frequency Fingerprint Engineering, Noemi Miguelez Gomez

Doctoral Dissertations and Master's Theses

The design and application of novel physical-layer security techniques have been increasing in the last decades as means to enhance the security that more traditional techniques provide to wireless communications systems. Well-known hardware security techniques, such as radio frequency fingerprinting, use unintended manufacturing process variations and unique hardware structures in the semiconductors for applications such as identification and classification of the source of different transmitted signals, and detection of hardware modifications. The uniqueness of the features that two different modules present, even maintaining the same design, can be used for modules characterization at a lower cost and complexity than other …

Advanced Manufacturing And Dielectric Material Characterization Techniques For High-Temperature Mm-Wave Antennas, Seng Loong Yu

Doctoral Dissertations and Master's Theses

As traditional monitoring data sensors in high temperature environments such as gas turbine engines and aerospace applications are being replaced by wireless equivalents in recent years, there is a need for low-cost, low-time, and low-infrastructure alternatives to further push the state of the art. In this work, two aspects of high temperature materials in the above context are explored: (a) the development of advanced manufacturing techniques for high temperature materials that is lowcost, low-time, and low-infrastructure, and (b) the development of material characterization techniques that can be integrated with the manufacturing processes of high temperature materials. Additive manufacturing has been …

Design And Analysis Of A Discrete, Pcb-Level Low-Power, Microwave Cross-Coupled Differential Lc Voltage-Controlled Oscillator, Pavin Singh Virdee

Master's Theses

Radio Frequency (RF) and Microwave devices are typically implemented in Integrated Circuit (IC) form to minimize parasitics, increase precision and tolerances, and minimize size. Although IC fabrication for students and independent engineers is cost-prohibitive, an abundance of low-cost, easily accessible printed circuit board (PCB) and electronic component manufacturers allows affordable PCB fabrication.

While nearly all microwave voltage-controlled oscillator (VCO) designs are IC-based, this study presents a discrete PCB-level cross-coupled, differential LC VCO to demonstrate this more affordable and accessible approach. This thesis presents a 65 mW, discrete component VCO PCB with industry-comparable RF performance. A phase noise of -103.7 dBc/Hz …

High Power Microwave Operational Exposure Detection Using Thermoacoustic Wave Generation In Lossy Dielectric Polymers, James J. Frey

Theses and Dissertations

A feasibility analysis for the use of microwave-induced thermoacoustic (TA) wave generation in lossy dielectric media to detect pulsed high power microwave directed energy weapons in force health protection applications was conducted based on a series of empirical and computational investigations. A potential target volume material, carbon-loaded polytetrafluoroethylene, was identified for further study based on anticipated complex dielectric properties, with laboratory measurements of select electromagnetic (EM), thermal, and elastic material properties of relevance to the TA effect conducted to determine parameter values. A planar geometry TA-based signal chain model using thin film piezoelectric sensors was developed for both finite element …

Golightly : A Gpu Implementation Of The Finite-Difference Time-Domain Method, S. David Lively

Electrical Engineering Theses and Dissertations

Traditionally, optical circuit design is tested and validated using software which implement numerical modeling techniques such as Beam Propagation, Finite Element Analysis and the Finite-Difference Time-Domain (FDTD) method. FDTD simulations require significant computational power. Existing installations may distribute the computational requirements across large clusters of high-powered servers. This approach entails significant expense in terms of hardware, staffing and software support which may be prohibitive for some research facilities and private-sector engineering firms. The application of modern programmable GPUs to problems in scientific visualization and computation has facilitated faster development cycles for a variety of industry segments including large dataset visualization, …

Remote Human Vital Sign Monitoring Using Multiple-Input Multiple-Output Radar At Millimeter-Wave Frequencies, Toan Khanh Vo Dai

Doctoral Dissertations

Non-contact respiration rate (RR) and heart rate (HR) monitoring using millimeter-wave (mmWave) radars has gained lots of attention for medical, civilian, and military applications. These mmWave radars are small, light, and portable which can be deployed to various places. To increase the accuracy of RR and HR detection, distributed multi-input multi-output (MIMO) radar can be used to acquire non-redundant information of vital sign signals from different perspectives because each MIMO channel has different fields of view with respect to the subject under test (SUT). This dissertation investigates the use of a Frequency Modulated Continuous Wave (FMCW) radar operating at 77-81 …

Algorithms For Exploration Of Advanced Electromagnetic Concepts, Asad Ullah Hil Gulib

Open Access Theses & Dissertations

3D printing is revolutionizing the manufacturing industry and is now being considered in the electronics industry. The creation of the worldâ??s first 3D volumetric circuit has made a way to make circuits smaller, lighter, into unconventional form factors and exploit physics like anisotropy more effectively than planar geometries can. While this is exciting, many problems must be solved to make 3D volumetric circuits more efficient. One of these problems is electromagnetic interference and mutual coupling between the circuit components that are expected to increase in high-frequency 3D circuits. Spatially variant anisotropic metamaterials (SVAMs) could be a solution to overcome this …

Arrayed Waveguide Lens For Beam Steering, Mostafa Honari-Latifpour, Ali Binaie, Mohammad Amin Eftekhar, Nicholas Madamopoulos, Mohammad-Ali Miri

Publications and Research

Integrated planar lenses are critical components for analog optical information processing that enable a wide range of applications including beam steering. Conventional planar lenses require gradient index control which makes their on-chip realization challenging. Here, we introduce a new approach for beam steering by designing an array of coupled waveguides with segmented tails that allow for simultaneously achieving planar lensing and off-chip radiation. The proposed arrayed waveguide lens is built on engineering the evanescent coupling between adjacent channels to realize a photonic lattice with an equi-distant ladder of propagation constants that emulates the continuous parabolic index profile. Through coupled-mode analysis …

Materials Design For Energy Applications Using Ab- Initio Calculations, Hind Hemaidee Alqurashi

Graduate Theses and Dissertations

The structural, dynamical, electronic, and thermoelectric properties of rock-salt and wurtzite Cd1-xZnxO alloys, VTiRhZ (Al, Ga, In, Si, Ge, Sn) and ZrTiRhZ (Ge, Sn) quaternary Heusler alloys (QHAs) were investigated using density functional theory (DFT) and semi-classical Boltzmann transport theory. From these calculations, the alloys were identified as potential materials for future thermoelectric applications. Furthermore, the magnetic and spin-polarization properties of these QHAs were investigated. The total magnetic moments were found to be integer values for all QHAs. In addition, all studied QHAs except VTiRhAl possess a half-metallic behavior with a 100% spin-polarization. The half-metallic ferromagnetic behavior makes them promising …

Nonreciprocal Surface Waves On Gyrotropic Interfaces, Alexander Martin Holmes

Theses and Dissertations

In this dissertation, the properties of highly nonreciprocal (unidirectional) surface waves guided along the interface between free-space and various 2D and 3D gyrotropic continua are investigated using analytic, numerical, and experimental methods. From a classical electromagnetics perspective, nonreciprocity in the dispersion of surface wave modes supported by the interface is achieved by breaking both time-reversal and space-inversion symmetries in the collective response of the waveguide, which consists of the two interfaced materials. More recently, however, a connection to momentum space topology via the bulk-edge correspondence principle has been made for gyrotropic continua, providing additional insights into the underlying physics that …

Study Of Single-Photon Wave-Packets With Atomically Thin Nonlinear Mirrors, Christopher Klenke

Graduate Theses and Dissertations

A novel controlled phase gate for photonic quantum computing is proposed by exploiting the powerful nonlinear optical responses of atomically thin transition metal dichalcogenides (TMDs) and it is shown that such a gate could elicit a π-rad phase shift in the outgoing electric field only in the case of two incident photons and no other cases. Firstly, the motivation for such a gate is developed and then the implementation of monolayer TMDs is presented as a solution to previous realization challenges. The single-mode case of incident photons upon a TMD is derived and is then used to constrain the more …

Glaciernet2: A Hybrid Multi-Model Learning Architecture For Alpine Glacier Mapping, Zhiyuan Xie, Umesh K. Haritashya, Vijayan K. Asari, Michael P. Bishop, Jeffrey S. Kargel, Theus Aspiras

Electrical and Computer Engineering Faculty Publications

In recent decades, climate change has significantly affected glacier dynamics, resulting in mass loss and an increased risk of glacier-related hazards including supraglacial and proglacial lake development, as well as catastrophic outburst flooding. Rapidly changing conditions dictate the need for continuous and detailed ob-servations and analysis of climate-glacier dynamics. Thematic and quantitative information regarding glacier geometry is fundamental for understanding climate forcing and the sensitivity of glaciers to climate change, however, accurately mapping debris-cover glaciers (DCGs) is notoriously difficult based upon the use of spectral information and conventional machine-learning techniques. The objective of this research is to improve upon an …

Towards A Low-Cost Solution For Gait Analysis Using Millimeter Wave Sensor And Machine Learning, Mubarak A. Alanazi, Abdullah K. Alhazmi, Osama Alsattam, Kara Gnau, Meghan Brown, Shannon Thiel, Kurt Jackson, Vamsy P. Chodavarapu

Electrical and Computer Engineering Faculty Publications

Human Activity Recognition (HAR) that includes gait analysis may be useful for various rehabilitation and telemonitoring applications. Current gait analysis methods, such as wearables or cameras, have privacy and operational constraints, especially when used with older adults. Millimeter-Wave (MMW) radar is a promising solution for gait applications because of its low-cost, better privacy, and resilience to ambient light and climate conditions. This paper presents a novel human gait analysis method that combines the micro-Doppler spectrogram and skeletal pose estimation using MMW radar for HAR. In our approach, we used the Texas Instruments IWR6843ISK-ODS MMW radar to obtain the micro-Doppler spectrogram …

Digital And Gradient Refractive Index Planar Optics By Nanoimprinting Porous Silicon, Anna Hardison

All Theses

Due to the drawbacks of traditional refractive optics, the implementation of planar or nearly planar optical devices has been of research interest for over a century. Subwavelength gratings are a particularly promising option for creating flat optical devices; however, the implementation of subwavelength grating-based optics is limited by fabrication constraints. Recently, we implemented flat optical devices using the nanoimprinting of refractive index (NIRI) process, a process which was pioneered in a previous study but remained largely unproven in terms of device fabrication. The planar, gradient index microlenses we fabricated were found to possess an effective medium similar to a subwavelength …