Engineering Commons^™

Agricultural Applications For Electromagnetic Exposure, H. Aliakbarian, A. Enayati, Hossein Ameri Mahabadi, M. Ashayer Soltani

Hossein Ameri Mahabadi

Despite the advances in bug controlling and antifreezing operations of agricultural products, the devastation of Sunne pests and freezing is still enormous. Traditional treatments such as chemical insecticides for bug controlling and covering to avoid freezing have not been sufficient. In the presented paper, new ideas of using electromagnetic treatment for anti-freezing operation, pre-harvest Sunne pest control, and Orchid flower control are introduced.

Trends In Uspto Office Actions, Ron D. Katznelson

Ron D. Katznelson

No abstract provided.

Analysis Of Three Phase Controlled Rectifier With The Same Distance Control As Compared To The Same Angle Control, Sudirman S., Sri Kurniati A.

Makara Journal of Technology

Analysis of three phase controlled rectifier with the same distance control as compared to the same angle control. This research aim to compare the firing of the same distance and the same angle control at three phase controlled rectifier with seen generated harmonic at input (AC side). Then calculate of rectifier efficiency and power factor comparison from both the control type. The rectifier use passive filter with resistance 11 ohm and is analysed with program simulation using PSPICE version 7.1. Result of research indicate that use of the same distance control generates the 5th and 7th harmonics, while the same …

Trajectory Shaping Of Surface-To-Surface Missile With Terminal Impact Angle Constraint, S. Subchan

Makara Journal of Technology

This paper presents trajectory shaping of a surface-to-surface missile attacking a fixed with terminal impact angle constraint. The missile must hit the target from above, subject to the missile dynamics and path constraints. The problem is reinterpreted using optimal control theory resulting in the formulation of minimum integrated altitude. The formulation entails nonlinear, two-dimensional missile flight dynamics, boundary conditions and path constraints. The generic shape of optimal trajectory is: level flight, climbing, diving; this combination of the three flight phases is called the bunt manoeuvre. The numerical solution of optimal control problem is solved by a direct collocation method. The …

Effect Of Contact Time On Interface Reaction Between Aluminum Silicon (7% And 11%) Alloy And Steel Dies Skd 61, Bambang Suharno, Neni Octapiani Nurhayati, Bustanul Arifin, Sri Harjanto

Makara Journal of Technology

Effect of Contact Time on Interface Reaction between Aluminum Silicon (7% and 11%) Alloy and Steel Dies SKD 61. Die soldering (die sticking) is a defect of metal casting in which molten metal “welds” to the metallic die mold surface during casting process. Die soldering is the result of an interface reaction between the molten aluminum and the die material. Aluminum alloy with 7 and 11% silicon and SKD 61 die steel are the most common melt and die material used in aluminum die casting. This research is done to study the morphology and the characteristics of the formed AlxFeySiz …

The Use Of Red Cabbage’S Anthocyanine Extract As A Photosensitizer On A Dye-Sensitized Nanocrystalline Tio2 Solar Cell, Akhiruddin Maddu, Mahfuddin Zuhri, Irmansyah Irmansyah

Makara Journal of Technology

The use of Red Cabbage’s anthocyanine extract as a photosensitizer on a Dye-Sensitized Nanocrystalline TiO2 Solar Cell. A solid-state dye-sensitized nanocrystalline TiO2 solar cell utilizing anthocyanin extract form red cabbage as photosensitizer was fabricated. The solar cell was formed in sandwich structure, which two electrodes sandwiching polymer electrolyte containing a redox couple (I-/I3 -). One of the electrodes, namely working electrode, TiO2 layer on TCO (transparent conducting oxide) coated glass substrate was sensitized with anthocyanin dye as electron donor in the system. Another electrode was a carbon sheet as a counter electrode. Gel electrolyte based on PEG (polyethylene glycol) containing …

Reverse Link Cdma System Capacity Evaluation For Stratospheric Platform Mobile Communications, Iskandar Iskandar

Makara Journal of Technology

We propose an analysis of reverse link CDMA multispot beam stratospheric platforms (SPF) in this paper. The SPF is currently proposed as a novel wireless technology for the development of the next generation fixed and mobile communications. The geometry of this technology is different from that of the terrestrial but rather similar to the satellite based cellular system. However, evaluation on the CDMA system capacity of this technology has not been much reported. This paper addresses all possible multiple access interference analyses including the effects of channel fading and shadowing in order to evaluate the system capacity. Single SPF and …

The Potency Of Fire And Explosion Hazard On Premium Oil Storage Tank At Depot X 2007, Fatma Lestari, Warid Nurdiansyah

Makara Journal of Technology

The Potency of Fire and Explosion Hazard on Premium Oil Storage Tank at Depot X 2007. Premium oil storage tanks have fire and explosion risk because Premium oil is flammable liquid. Because of that, fire and explosion risk assessment on Premium oil storage tank at Depot X is needed as foundation to fire and explosion risk management, and comply with regulations. Method of this research is Dow’s Fire and Explosion Index. This research indicate that F&EI value for Premium oil storage tank is 118,82. Based on that F&EI value, level of risk at Premium oil storage tank is intermediate risk.

Limiting Maximum Drag Reduction Asymptote For The Moment Coefficient Of An Enclosed Rotating Disk With Fine Spiral Grooves, Budiarso Budiarso, Keizo Watanabe, Satoshi Ogata

Makara Journal of Technology

In this study, the limiting maximum drag reduction asymptote for the moment coefficient of an enclosed rotating disk with fine spiral grooves in turbulent flow region were obtained analytically. Analysis which were based on an assumption for a simple parabolic velocity distribution of turbulent pipe flow to represent relative tangential velocity, was carried out using momentum integral equations of the boundary layer. For a certain K- parameter the moment coefficient results agree well with experimental results for maximum drag reduction in an enclosed rotating disk with fine spiral grooves and drag reduction ratio approximately was 15 %. Additionally, the experimental …

Co2 Absorption From Its Mixture With Ch4 Or N2 Through Hollow Fiber Membrane Contactor Using Water As Solvent, Sutrasno Kartohardjono, Anggara Anggara, Subihi Subihi, Yuliusman Yuliusman

Makara Journal of Technology

CO2 Absorption from Its Mixture with CH4 or N2 through Hollow Fiber Membrane Contactor using Water as Solvent. Hollow fiber membrane contactors have been widely used as gas-liquid contactors recently such as in the CO2 absorption process from gas stream. This research aims to evaluate the effectiveness of hollow fiber membrane contactor to absorb CO2 from its mixture with CH4 or N2 using water through mass transfer and hydrodynamic tests. There are 3 membrane modules used in this research with shell diameter of 1.9 cm, length of 40 cm, outer fiber diameter of 2.7 mm and fiber number in the …

Sub-Bottom Profiling Using Time-Frequency Analysis, William Sanders, Dale Bibee, Edit J. Kaminsky

Electrical Engineering Faculty Publications

No abstract provided.

Electric Power: Cyber And Electromagnetic Security Issues, George H. Baker

George H Baker

Electric power is essential to the functioning of U.S. society. The electric power system increasingly operates at or near its reliability limits. The geographic scale of the tightly coupled networks involved makes the system susceptible to large-scale outages. More frequent natural and accidental failures portend possible catastrophes from intentional disruption. Deregulation has been a major factor to the lack of investment in system upgrades. Techniques to prevent attacks and reduce vulnerabilities are available and affordable.

The Capability Of The Edca Mechanism To Support Voice Traffic In A Mixed Voice/Data Transmission Over 802.11e Wlans: An Experimental Investigation, Miroslaw Narbutt, Mark Davis

Conference papers

In this paper we experimentally evaluate the capability of the EDCA mechanism to support voice traffic in a mixed voice/data transmission over 802.11e WLANs. In particular we investigate how real-time voice transmission can be supported by tuning four EDCA parameters, namely AIFSN, CWmin, CWmax and TXOP and how this impacts on background data transmission. The experimental set-up involves fifteen VoIP terminals sending bi-directional traffic between wired and wireless subnets and another station injecting various types of heavy background load to the wireless subnet. End-to-end voice transmission quality is predicted from time-varying transmission impairments with the use of the latest Appendix …

Embedded Centrosymmetric Multilayer Stacks As Complete-Transmission Quarter-Wave And Half-Wave Retarders Under Conditions Of Frustrated Total Internal Reflection, S. R. Perla, R. M.A. Azzam

Electrical Engineering Faculty Publications

A centrosymmetric multilayer stack of two transparent materials, which is embedded in a high-index prism, can function as a complete-transmission quarter-wave or half-wave retarder (QWR or HWR) under conditions of frustrated total internal reflection. The multilayer consists of a high-index center layer sandwiched between two identical low-index films with high-index–low-index bilayers repeated on both sides of the central trilayer, maintaining the symmetry of the entire stack and constituting a QWR ( Δt=90° or 270°) or HWR (Δt=180°) in transmission. A QWR design at wavelengthλ=1.55 μm is presented that employs an 11-layer stack of Si and SiO2 thin films, which is …

Analysis Of A Variable Speed Double-Fed Induction Generator Wind Turbine During Network Voltage Unbalance Conditions., Joseph Kearney, Michael Conlon

Conference papers

The behaviour of Double-Fed Induction Generators to supply network voltage unbalance is investigated. The paper shows the effects that voltage unbalance can have on a DFIG, using Matlab/Simulink. The results from simulations show that voltage unbalance affects both the induction generator and the rotor converter, due to the high unbalanced currents generated. The ability to modify the control strategy of a DFIG to compensate for voltage unbalance is outlined and simulations show the improvements to the performance of the DFIG.

Localisation Of Production Placement And Reduction Of Energy Transfer, Tarak Mesbah, Kamel Bounaya, Boukhemis Chetate

Boukhemis Chetate

The first step in the planning of the electrical supply networks consists in defining the optimum placement of one or more power stations; this can be done by the centre of gravity method, or by the minimal reduced costs. The first method take in account only the optimisation of investments, tended that the second in addition to the investments holds operating statement "production cost, cooling and transport." In this study, we show also the strategy and the criteria of delimitation of the zones to electrify by the same departure and to reduce the transfer of power between zones, which has …

Video Frame Differentiation For Streamed Multimedia Over Heavilty Loaded Ieee 802.11e Wlan Using Txop, Nicola Cranley, Mark Davis

Conference papers

In this paper we perform an experimental investigation of using video frame differentiation in conjunction with the TXOP facility to enhance the transmission of parallel multimedia streaming sessions in IEEE 802.11e. The delay constraints associated with the audio and video streams that comprise a multimedia session pose the greatest challenge since real-time multimedia is particularly sensitive to delay as the packets require a strict bounded end-to-end delay. Video streaming applications are considered to be bursty. This burstiness is due to the frame rate of vide., the intrinsic hierarchical structure of the constituent video frame types. The TXOP facility is particularly …

Examination Of Energy And Group Velocities In Positive And Negative Index Chiral Materials With And Without Dispersion, Monish Ranjan Chatterjee, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Concepts of energy and group velocities, Poynting and propagation vectors are examined for both positive and negative index materials. Known definitions for these entities are explored in terms of the interplay of chirality and dispersion.

Characterization And Modeling Of Low-Frequency Noise In Hf-Based High -Kappa Dielectrics For Future Cmos Applications, Purushothaman Srinivasan

Dissertations

The International Technology Roadmap for Semiconductors outlines the need for high-K dielectric based gate-oxide Metal Oxide Semiconductor Field Effect Transistors for sub-45 nm technology nodes. Gate oxides of hafnium seem to be the nearest and best alternative for silicon dioxide, when material, thermal and structural properties are considered. Usage of poly-Si as a gate electrode material degrades the performance of the device and hence gate stacks based on metal gate electrodes are gaining high interest. Though a substantial improvement in the performance has been achieved with these changes, reliability issues are a cause of concern. For analog and mixed-signal applications, …

Automatic Physical Database Design : Recommending Materialized Views, Wugang Xu

Dissertations

This work discusses physical database design while focusing on the problem of selecting materialized views for improving the performance of a database system. We first address the satisfiability and implication problems for mixed arithmetic constraints. The results are used to support the construction of a search space for view selection problems. We proposed an approach for constructing a search space based on identifying maximum commonalities among queries and on rewriting queries using views. These commonalities are used to define candidate views for materialization from which an optimal or near-optimal set can be chosen as a solution to the view selection …

Wide-Angle, High-Extinction-Ratio, Infrared Polarizing Beam Splitters Using Frustrated Total Internal Reflection By An Embedded Centrosymmetric Multilayer, Siva R. Perla, R. M.A. Azzam

Electrical Engineering Faculty Publications

A centrosymmetric multilayer stack of two transparent thin-film materials, which is embedded in a high-index prism, is designed to function as an efficient polarizer or polarizing beam splitter (PBS) under conditions of frustrated total internal reflection over an extended range of incidence angles. The S(LH)^kLHL(HL)^kS multilayer structure consists of a high-index center layer H sandwiched between two identical low-index films L and high-index-low-index bilayers repeated (k times) on both sides of the central trilayer maintaining the symmetry of the entire stack. For a given set of refractive indices, all possible solutions for the thicknesses of …

Rare: Resource Aware Routing For Mesh, Karol Kowalik, Brian Keegan, Mark Davis

Conference papers

An important element of any routing protocol used for Wireless Mesh Networks (WMNs) is the link cost function used to represent the radio link characteristic. The majority of the routing protocols for WMNs attempt to accurately characterise the radio link quality by constructing the link cost function from the measurements obtained using active probing techniques, which introduces overhead. In this paper we propose a new approach called Resource Aware Routing for mEsh (RARE) which instead employs passive monitoring to gather radio link information. This results in a smaller overhead than the other methods that require active network probing, and is …

Analysis Of Beam Propagation In 90-Degree Holographic Recording And Readout Using Transfer Functions And Numerical 2-D-Laplace Inversion, Monish Ranjan Chatterjee, Partha P. Banerjee, George Nehmetallah

Electrical and Computer Engineering Faculty Publications

Recently, 2-D-Laplace analysis of recording and readout of edge-holograms was reported. Numerical Laplace inversion was examined for simple test cases. Inversion algorithms are applied to examine beam shaping and distortion in photovoltaic and photorefractive materials.

Low Jitter Phase-Locked Loop Clock Synthesis With Wide Locking Range, Adnan Gundel

Dissertations

The fast growing demand of wireless and high speed data communications has driven efforts to increase the levels of integration in many communications applications. Phase noise and timing jitter are important design considerations for these communications applications. The desire for highly complex levels of integration using low cost CMOS technologies works against the minimization of timing jitter and phase noise for communications systems which employ a phase-locked loop for frequency and clock synthesis with on-chip VCO. This dictates an integrated CMOS implementation of the VCO with very low phase noise performance. The ring oscillator VCOs based on differential delay cell …

Reliability Studies Of Tin/Hf-Silicate Based Gate Stacks, Naser Ahmed Chowdhury

Dissertations

Hafnium-silicate based oxides are among the leading candidates to be included into the first generation of high-Κ gate stacks in nano-scale CMOS technology because of their distinct advantages as far as thermal stability, leakage characteristics, threshold stability and low mobility degradation are concerned. Their reliability, which is limited by trapping at pre-existing and stress induced defects, remains to be a major concern.

Energy levels of electrically active ionic defects within the thick high-Κ have been experimentally observed in the context of MOS band diagram for the first time in Hf-silicate gate stacks from low temperature and leakage measurements. Excellent match …

Design And Performance Of Cdma Codes For Multiuser Communications, Radharani Poluri

Dissertations

Walsh and Gold sequences are fixed power codes and are widely used in multiuser CDMA communications. Their popularity is due to the ease of implementation. Availability of these code sets is limited because of their generating kernels. Emerging radio applications like sensor networks or multiple service types in mobile and peer-to-peer communications networks might benefit from flexibilities in code lengths and possible allocation methodologies provided by large set of code libraries.

Walsh codes are linear phase and zero mean with unique number of zero crossings for each sequence within the set. DC sequence is part of the Walsh code set. …

Titanium Nitride As An Electrode Material For High Charge Density Applications, Mustafa Khan Patan

Theses

Present day neural prostheses require electrodes with high current densities. Traditional electrodes are not capable of delivering such high current densities. Titanium nitride as an electrode material and other techniques like reactive ion etching, platinization of titanium were studied in this thesis towards improving charge density of electrodes.

Titanium nitride (TiN) was sputtered in a custom designed pattern of electrodes with silicon as substrate, at a deposition rate of 2 A /sec. Atomic Force Microscopy (AFM) analysis of TiN film showed a smooth surface for a film thickness of 1 μm. X-Ray Diffraction (XRD) analysis of the film showed the …

Continuous Improvement In Engineering Education Through Effective Value For Money Audits, Razimah Abdullah, Rozeha A Rashid, Mazlina Esa, Sadruddin Mohd Saidfudin

Razimah Abdullah

Simple: System Automatic Essay Assessment For Indonesian Language Subject Examination, Anak Agung Putri Ratna, Bagio Budiardjo, Djoko Hartanto

Makara Journal of Technology

SIMPLE: System Automatic Essay Assessment for Indonesian Language Subject Examination. Evaluation of study of a student is a very important aspect of an educational process. Evaluation is aimed at measuring the level of student understanding of the given lecture materials. Measuring student understanding of the course material, using essay-type exam, is generally used as the evaluation tool. In this essay-type exam, the student has to answer questions using sentences, whereby choices of possible answers are not indicated. The student has to answer the questions with his/her sentences. The answers may vary, since it reflects the student’s best thoughts of the …

Mechanical Study On Using Of Accr Thermal Conductor At 500 Kv Sutet, Suprihadi Prasetyono

Makara Journal of Technology

Mechanical Study on using of ACCR Thermal Conductor at 500 kV SUTET. At the height of electricity demand increasing recently, circumstance of environment more limited and also expense of high investment, making thermal conductor (conductor thermal resistance) considered to be one of alternative in the electricity transmission bottlenecks. These days it has been developed thermal conductor ACCR (Aluminium Conductor Composite Reinforced) which can operate with temperature up to 240oC, so that making the current carrying capacity being higher than conventional conductor. This research aimed to study load current leading to mechanical characteristic ACCR conductor included tension, length of elongation and …