Engineering Commons^™

Optimal Distribution Reconfiguration And Demand Management Within Practical Operational Constraints, Benyamin Moradzadeh

Doctoral Dissertations

This dissertation focuses on specific aspects of the technical design and operation of a `smart' distribution system incorporating new technology in the design process. The main purpose of this dissertation is to propose new algorithms in order to achieve a more reliable and economic distribution system.

First, a general approach based on Mixed Integer Programming (MIP) is proposed to formulate the reconfiguration problem for a radial/weakly meshed distribution network or restoration following a fault. Two objectives considered in this study are to minimize the active power loss, and to minimize the number of switching operations with respect to operational constraints, …

Tools And Methods To Optimize The Analysis Of Telescopic Performance Metrics On Sofia, Steven R. Wilson, Holger Jakob, Stefan Teufel, Zaheer Ali, Jeffrey Van Cleve, Brian Eney, Greg Perryman

STAR Program Research Presentations

SOFIA is an infrared observatory mounted on a modified 747 engineered to do infrared astronomy at 45000 feet. The telescope equipment contains a number of sensors and stabilizers that allow the telescope to capture images while mounted in a moving plane. We have developed methods to analyze the performance of the telescope assembly that will help improve the stabilization and image capturing performance of the observatory. Here we present reusable methods to analyze telescope performance data that will enable improvements in the quality of the scientific data that is produced by the SOFIA. This poster focuses on the multi-flight performance …

Wireless Sensor Network Deployment, Yipeng Qu

FIU Electronic Theses and Dissertations

Wireless Sensor Networks (WSNs) are widely used for various civilian and military applications, and thus have attracted significant interest in recent years. This work investigates the important problem of optimal deployment of WSNs in terms of coverage and energy consumption. Five deployment algorithms are developed for maximal sensing range and minimal energy consumption in order to provide optimal sensing coverage and maximum lifetime. Also, all developed algorithms include self-healing capabilities in order to restore the operation of WSNs after a number of nodes have become inoperative.

Two centralized optimization algorithms are developed, one based on Genetic Algorithms (GAs) and one …

Finfet Device Optimization At 15nm For Near-Threshold Operation, Jolene Singh

Open Access Theses

Much of the current research in the electronic industry focuses on reducing power consumption of digital circuits. Towards the same many attempts are being made to reduce the operating voltage of the circuits. It has been shown through device and circuit analysis that a circuit consumes minimum energy when operated near threshold voltage. In this thesis I vary device parameters and study their effects on energy consumption and delay of the device for the two regions of operation - superthreshold and near-threshold, using LUTs of IV and CV characteristics, verilogA and hSpice. Finally, device parameters are obtained for an optimum …

Time Domain Simulation Of Novel Photovoltaic Materials, Haejun Chung

Open Access Theses

Thin-film silicon-based solar cells have operated far from the Shockley- Queisser limit in all experiments to date. Novel light-trapping structures, however, may help address this limitation. Finite-difference time domain simulation methods offer the potential to accurately determine the light-trapping potential of arbitrary dielectric structures, but suffer from materials modeling problems. In this thesis, existing dispersion models for novel photovoltaic materials will be reviewed, and a novel dispersion model, known as the quadratic complex rational function (QCRF), will be proposed. It has the advantage of accurately fitting experimental semiconductor dielectric values over a wide bandwidth in a numerically stable fashion. Applying …

Optimized Operation And Maintenance Costs To Improve System Reliability By Decreasing The Failure Rate Of Distribution Lines, Hamed Hashemi Dezaki, Seyed Hossein Hosseinian, Hossein Askarian Abyaneh, Seyed Mohammad Mousavi Agah

Turkish Journal of Electrical Engineering and Computer Sciences

Improving distribution system reliability has received a great deal of attention in recent years. Because of the limitation in expected budgets, it is desirable to determine the most efficient strategy to improve system reliability. This paper proposes a novel method to determine the optimized operation and maintenance costs in order to decrease the failure of system components. The proposed objective function includes the average system frequency interruption index (ASIFI) value. To achieve the best strategy to decrease failures of system components, it is necessary to find the minimum value of the objective function, considering the constraints of operation and maintenance …

Modelling Of Polyaniline For Wi-Fi Electromagnetic Interference Shielding, Whamid Al-Shabib, Stefan W. Lachowicz

Research outputs 2013

In this paper COMSOL model is used to model the s-parameters of the electromagnetic shielding of layer/layers of Polyaniline (PAni) for Wi-Fi Electromagnetic Interference (EMI) shielding. PAni has a good future for minimizing the problems with Electromagnetic Shielding (EMS), and will be increasingly be used to provide protection from Electromagnetic Radiation (EMR) and Electromagnetic Interference (EMI). With the increased development in Wi-Fi and telecommunications equipment, a simple model is required to test for transmission losses. In this paper the electromagnetic radiation from antenna, positioned 30cm from PAni shielding device is modelled using COMSOL 4.2. The paper predicts the radiation reduction …

Data Hiding In Digital Images Using A Partial Optimization Technique Based On The Classical Lsb Method, Feyzi̇ Akar, Yildiray Yalman, Hüseyi̇n Selçuk Varol

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a new partial optimization approach for the least significant bit (LSB) data hiding technique that can be used for protecting any secret information or data. A deterioration effect of as little as possible in an image is intended using the LSB data hiding technique and this is well realized utilizing the proposed partial optimization approach achieving the same data embedding bit rates. In the proposed approach, all of the image pixels are classified into 8 regions and then the 8 distinct ordering codings are applied to each region by the developed partial optimization encoder. Thus, the most …

Optimal Placement And Sizing Of Distributed Generations In Distribution Systems For Minimizing Losses And Thd_V Using Evolutionary Programming, Aida Fazliana Abdul Kadir, Azah Mohamed, Hussain Shareef, Mohd Zamri Che Wanik

Turkish Journal of Electrical Engineering and Computer Sciences

Growing concerns over environmental impacts, improvement of the overall network conditions, and rebate programs offered by governments have led to an increase in the number of distributed generation (DG) units in commercial and domestic electric power production. However, a large number of DG units in a distribution system may sometimes contribute to high levels of harmonic distortion, even though the emission levels of the individual DG units comply with the harmonic standards. It is known that the nonoptimal size and nonoptimal placement of DG units may lead to high power losses, bad voltage profiles, and harmonic propagations. Therefore, this paper …

Fault Observability In Distributed Power System, Hamidreza Nazaripouya

LSU Master's Theses

Fault observability as well as fault location algorithms in distributed power system are studied in this thesis. The importance of finding the fault location in a distribution system with the purpose of increasing reliability and decreasing the maintenance time and cost is discussed. Then, different existing fault location algorithms and approaches in the literature are introduced and compared. Subsequently, a new strategy to achieve fault observability of power systems while aiming minimum required number of Phasor Measurement Units (PMUs) in the network is proposed. The method exploits the nodal voltage and mesh current analyses where the impedance and admittance matrices …

Coordinated Control Of Power Electronic Converters In An Autonomous Microgrid, Gholamreza Dehnavi

Theses and Dissertations

Advances in power electronics and generation technologies have increased the viability of distributed generation systems. A microgrid is a special category of distributed generation systems that is distinguished by its size and the ability to operate independently as an islanded system. As long as a microgrid is connected to a large grid, quality of the voltage is supported by the main grid and each power source connected to the microgrid generates independently. In contrast, in the islanded operation of microgrids and in electrical islands such as shipboard distribution systems, dynamics are strongly dependent on the connected sources and on the …

Predictive Pattern Discovery In Dynamic Data Systems, Wenjing Zhang

Dissertations (1934 -)

This dissertation presents novel methods for analyzing nonlinear time series in dynamic systems. The purpose of the newly developed methods is to address the event prediction problem through modeling of predictive patterns. Firstly, a novel categorization mechanism is introduced to characterize different underlying states in the system. A new hybrid method was developed utilizing both generative and discriminative models to address the event prediction problem through optimization in multivariate systems.

Secondly, in addition to modeling temporal dynamics, a Bayesian approach is employed to model the first-order Markov behavior in the multivariate data sequences. Experimental evaluations demonstrated superior performance over conventional …

Control Of Smart Building Using Advanced Scada, Vivin Thomas Samuel

USF Tampa Graduate Theses and Dissertations

ABSTRACT

For complete control of the building, a proper SCADA implementation and the optimization strategy has to be build. For better communication and efficiency a proper channel between the Communication protocol and SCADA has to be designed.

This paper concentrate mainly between the communication protocol, and the SCADA implementation, for a better optimization and energy savings is derived to large scale industrial buildings. The communication channel used in order to completely control the building remotely from a distant place. For an efficient result we consider the temperature values and the power ratings of the equipment so that while controlling the …