Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Carbon nanotube (2)
- EIS (2)
- Electrocatalysis (2)
- Hemoglobin (2)
- 'Soft chemical' method (1)
-
- (S)-3-Phenylpropane-2-tert-butoxycarbonylamino-1-thiol (1)
- ) α-Fe_2O_(3)-TiO_2 (1)
- )Electrolysis (1)
- AC electrodeposition (1)
- Actinomycin-C (1)
- Activated carbon (1)
- Adsorbed intermediate (1)
- Air electrode (1)
- Anode materials (1)
- Asymmetric synthesis (1)
- BaFeSi/C composite (1)
- Cancer cells U-937 (1)
- Cathode (1)
- Cathode material (1)
- Cation dopant (1)
- CeO_(2) Co-repressing (1)
- Co-sintering (1)
- Commercial catalyst (1)
- Current yield (1)
- Cyclicvoltammetry (1)
- Direct electrochemistry (1)
- Direct methanol fuel cells(DMFCs) (1)
- EMD (1)
- Electric conduction network (1)
- Electric double-layer capacitor (1)
Articles 1 - 30 of 35
Full-Text Articles in Engineering
Electrochemical Behaviours Of Hemoglobin-Ddab-Modified Powder Microelectrode And The Application Of The Powder Microelectrode In Determination Of Nitric Oxide, Zhi-Mou Guo, Huan Liu, Jian Chen, Wen-Ting Zhang
Electrochemical Behaviours Of Hemoglobin-Ddab-Modified Powder Microelectrode And The Application Of The Powder Microelectrode In Determination Of Nitric Oxide, Zhi-Mou Guo, Huan Liu, Jian Chen, Wen-Ting Zhang
Journal of Electrochemistry
The electrochemical behaviours of DDAB-Hb-PME were studied in this paper. The (apparent) surface concentration of Hb was enhanced greatly by using the powder microelectrode (technique). NO reacts with Hb and absorbs on the surface of the modified carbon powder. Therefore, the output of the electrode was enhanced greatly by employing PME with higher reaction surface (area). The sensitivity of DDAB-Hb-PME is 3.1 mA/μmol·L~(-1)·cm~(2), which is much larger than the values obtained with the traditional electrodes. The detection limit is 9 nmol·L~(-1) and the linear response range is 9～100 nmol·L~(-1).
Electrocatalytic Performances Of Carbon Nanotube Air Electrode For Oxygen Reduction, Feng-Ming Zhao, Chun-An Ma
Electrocatalytic Performances Of Carbon Nanotube Air Electrode For Oxygen Reduction, Feng-Ming Zhao, Chun-An Ma
Journal of Electrochemistry
The air electrodes with different mass ratio of Pt/active carbon or carbon nanotube as catalyst layer material have been prepared. The electrocatalytic performances for oxygen reduction were evaluated by means of polarization curve and electrochemical impedance spectroscopy (EIS). The results disclosed that carbon nanotubes dealt with nitric acid in the catalyst layer had been improved obviously on the electrocatalytic activity. After the surface of carbon nanotube was oxygenated and aggraded with platinum, the catalyst had obviously effects on the electrocatalytic activity. The air electrode with the mass ratio of active carbon to Pt/carbon nanotube in 4∶1 showed better electrocatalytic activity, …
Anodic Dissolution Of Aluminum In Koh-Ethanol Solutions, Hai-Bo Shao, Jian-Ming Wang, Xiao-Yan Wang, Yi Zheng, Jian-Qing Zhang
Anodic Dissolution Of Aluminum In Koh-Ethanol Solutions, Hai-Bo Shao, Jian-Ming Wang, Xiao-Yan Wang, Yi Zheng, Jian-Qing Zhang
Journal of Electrochemistry
The feasibility of employing aluminum in KOH ethanol solution as a battery anode system was discussed. Weight loss measurement showed that the corrosion rate of Al is low enough to be used in sealed batteries. Through the measurements done by anodic polarization, EIS and galvanostatic discharge, it was found that A1 is electrochemical active in a wide potential range in this system, and its discharge mechanism is similar to that of A1 in aqueous solution. The discharge potential increased rapidly after a period of time, which might be caused by the discharge products depositing on the electrode surface.
Preparation And Photo-Catalyst Properties Of The Α-Fe_2o_3-Tio_2 Films On Sodium Alginate Polymer, Li-Qin Chen, Huai-Zhen Zhong, Ri-Yao Chen, Xi Zheng, Zhen Chen
Preparation And Photo-Catalyst Properties Of The Α-Fe_2o_3-Tio_2 Films On Sodium Alginate Polymer, Li-Qin Chen, Huai-Zhen Zhong, Ri-Yao Chen, Xi Zheng, Zhen Chen
Journal of Electrochemistry
Three new nano thin films of α-Fe_2O_(3)、TiO_2 and α-Fe_2O_(3)-TiO_2 by doping their powder with sodium alginate polymer were prepared. Surface structure and catalytic activities of the films were characterized by FTIR、XRD、PL、TEM and I-V techniques. The results of UV-visible absorption showed that the methylene blue was mineralized in aqueous of α-Fe_2O_(3)/SA、TiO_2/SA and (α-(Fe_2O_(3)))-TiO_2 /SA upon radiation with ultra violet light. α-Fe_2O_(3) enhanced their photo-decolorized-activities by doping 15% TiO_2.
Applications Of New Activated Carbon Meterials In The Electric Double-Layer Capacitor, Jian-Jun Zhang
Applications Of New Activated Carbon Meterials In The Electric Double-Layer Capacitor, Jian-Jun Zhang
Journal of Electrochemistry
A new type activated carbon whose precursor was coconut shell could be obtained using specific physics-chemistry activation, and the activated carbon was applied as the material of electrode in EDLC(electrical double-layer capacitor),which had a large specific capacitance,and could charge and discharged in some large currents. Carbon dioxide and acid were used to modify carbon,and the effects of post-treatment on surface area and pore volume were investigated. A moulding method which has influence on some properties of carbon electrode with PTFE additive was researched in the paper.
Improvement And Its Mechanism Of Storage Performance Of Ni-Mh Battery, Xiao-Feng Li
Improvement And Its Mechanism Of Storage Performance Of Ni-Mh Battery, Xiao-Feng Li
Journal of Electrochemistry
The storage performance of nickel-metal-hydride (Ni-MH) battery was studied by using galvanostatic charge-discharge and cyclic voltammetry. The experimental results indicated that CoOOH could not be completely restored after its being thoroughly reduced at lower potential, which might weaken electric conduction network in the positive electrode and result in fading of electrochemical properties of Ni-MH battery. Addition of nickel powder as a conductive agent into the positive electrode was beneficial to the capacity recovery after storage.
Effect Of Fe~(3+) Dopen Of Titanium Dioxide Film On Absorption Spectra And Photo Catalysis, Mei-Qun Xiao, Jia-Nian Shen, Moucheng Li, Peng-Fei Wu, Dong Liu, Yu-Juan Zhang
Effect Of Fe~(3+) Dopen Of Titanium Dioxide Film On Absorption Spectra And Photo Catalysis, Mei-Qun Xiao, Jia-Nian Shen, Moucheng Li, Peng-Fei Wu, Dong Liu, Yu-Juan Zhang
Journal of Electrochemistry
Photo-catalytic titanium dioxide film in nano crystalline has been prepared by electrochemical oxidation process and adding different amount of ferric ion into the electrolyte during the anodic oxidation.The effects of Fe~(3+) dopen on absorption spectra and photo-catalytic of the titanium dioxide films have been studied. It shows that the Fe~(3+) dopen caused the red shife of the absorption edge for the incoming light and exhibited the improved photocatalytic reactivity.
The Investigation Of Bafesi/C Alloy Composite As Anode Materials For Li-Ion Battery, Rui-Xiang Feng, Hua Dong, Xin-Ping Ai, Han-Xi Yang
The Investigation Of Bafesi/C Alloy Composite As Anode Materials For Li-Ion Battery, Rui-Xiang Feng, Hua Dong, Xin-Ping Ai, Han-Xi Yang
Journal of Electrochemistry
A novel BaFeSi/C composite was prepared by mechanical ball milling, and lithium insertion reactions on the composite electrode were investigated by cyclic voltammetry ,charge-discharge measurements, XRD and XPS spectroscopy. It is demonstrated that the capacity retention with indiscernible capacity decas during charge-discharge cycling. The improved cycling ability of the composite is suggested from a cooperative action by inactive FeSi_(2 )and BaSi_2 matrix and outer graphite shell, which both buffer the volumetric changes of the active Si phase and provide a good connection for electronic and ionic conduction during lithium insertion and extraction processes.
Lico_(X)Ni_(1-X)O_2 Cathode Materials Prepared By Electrolysis Of Co And Ni, Jin-Ping Wei, Xin Sun, Xiao-Yu Wang, Xi-Kui Bian, Jin-Ling Zhai, Yan-Jie Yan-Jie
Lico_(X)Ni_(1-X)O_2 Cathode Materials Prepared By Electrolysis Of Co And Ni, Jin-Ping Wei, Xin Sun, Xiao-Yu Wang, Xi-Kui Bian, Jin-Ling Zhai, Yan-Jie Yan-Jie
Journal of Electrochemistry
A new electrolytic method was developed to prepare LiCo_(x)Ni_(1-x)O_2 as a cathode material of lithium-ion battery. Contrary to the traditional method, electrolytic method is a potential method with simple process to industrialization and no pollution. Metal cobalt and nickel were electrolysed in parallel to prepare the precursor of Co_( x )Ni_(1- x )(OH)_2.Different compositional precursors could be conveniently prepared by changing electrolytic current. The LiCo_(0.3)Ni_(0.7)O_2 cathode prepared by this method was found favorable charge-discharge and cycle properties. For the LiCo_(0.3)Ni_(0.7)O_(2 )cathode material, the discharge capacities in the 1st and 50th cycles were 163 mAh/g and 140 mAh/g with charge retention …
Synergisms Of Electric Or Electromagnetic Fields And Photodynamic Effects Induce Apoptosis And Necrosis Of Cancer Cells, Radeva Maria, Lambrera Maya, Angelova Plamena, Traitcheva Nelly, Berg Hermann
Synergisms Of Electric Or Electromagnetic Fields And Photodynamic Effects Induce Apoptosis And Necrosis Of Cancer Cells, Radeva Maria, Lambrera Maya, Angelova Plamena, Traitcheva Nelly, Berg Hermann
Journal of Electrochemistry
Weak pulsating sinusoidal electromagnetic fields (PEMF) have been applied to change membrane permeation and induction of apoptosis (necrosis). In the case of suspension of human cancer cells U-937 and K-562 inside of Helmholtz-coils the amplitude of PEMF B=10 and at 39mT (at 50 Hz) was combined gradually with the cytotoxic agent actinomycin-C on one hand with its novel photodynamic activity on the other. Depending on temperature, pH-value and treatment time the necrosis of these cells was determined by means of trypan blue staining as well as the induced apoptosis by FACScan technique. Synergisms were discovered yielding high rates of cell …
Synthesis And Electrochemical Behavior Of Layered-Structure Limn_(1-X)Cr_Xo_2, Jie Xiao, Hui Zhan, Yun-Hong Zhou
Synthesis And Electrochemical Behavior Of Layered-Structure Limn_(1-X)Cr_Xo_2, Jie Xiao, Hui Zhan, Yun-Hong Zhou
Journal of Electrochemistry
The Layered-structure LiMn_(1-x)Cr_xO_(2 )(x=0,0.15) solid solution has been prepared by the rheological phase method. From the XRD results, undoped LiMnO_(2) crystallized almost entirely in the orthorhombic phase while the structure of LiMn_(0.85)Cr_(0.15)O_(2) belongs to monoclinic phase. TEM investigation shows that the final powder product consists of ultrafine spherical particles which are distributed homogeneously, with the average diameter ranging from 60 to 300nm. The initial discharge capacity of LiMn_(0.85)Cr_(0.15)O_(2) is much higher than that of undoped LiMnO_(2). After 40 cycles, the capacity retention for m-LiMn_(0.85)Cr_(0.15)O_(2 )is 94% at the current rate of 50mA/g under room temperature. The results of electrochemistry tests …
Preparation And Electrochemical Performance Of New Composite Seperators For Lithium-Ion Batteries, Hu Cheng, Hong-Yan Du, Yong Yang
Preparation And Electrochemical Performance Of New Composite Seperators For Lithium-Ion Batteries, Hu Cheng, Hong-Yan Du, Yong Yang
Journal of Electrochemistry
New composite seperators for lithium ion batteries were prepared by coating PEO mixed with nanosize SiO_(2)onto microporous polypropylene(PP) seperators. Highly conductive electrolytes were prepared by soaking them in an electrolyte solution. With these composite separators, the lithium ion cell consisting of Li anode and LiNi_(0.8)Co_(0.2)O_(2)cathode were assembled. The high initial discharge capacity and good capacity retention were obtained through the cell.
Solid State Synthesis And Electrocatalysis Of Pt/Moo_3 For The Oxidation Of Methanol, Wang Qing
Solid State Synthesis And Electrocatalysis Of Pt/Moo_3 For The Oxidation Of Methanol, Wang Qing
Journal of Electrochemistry
The electrocatalyst, Pt/MoO_(3) synthesized by solid state reaction, was used for the oxidation of methanol in direct methanol fuel cells. The X-Ray diffraction and cyclic voltammetry were employed to investigate the performance of the material. It was shown that the typical diffraction peaks for Pt appeared in XRD. And a good electrocatalysis for methanol oxidation was observed. The peak potential of the methanol oxidation appeared at ca. 0.63V(vs.SCE) and the peak current density for the oxidation was 78.1 mA cm~(-2) .
Fabrication Of Solid Oxide Fuel Cells And Analysis Of Their Structure And Performance, Nai-Tao Yang
Fabrication Of Solid Oxide Fuel Cells And Analysis Of Their Structure And Performance, Nai-Tao Yang
Journal of Electrochemistry
An intermediate temperature solid oxide fuel cell (IT-SOFC) was fabricated by co-copressing-sintering methods, and the electrolyte of Ce_(0.8)Gd_(0.2)O_(1.9) (CGO) and cathode materials of La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-α) (LSCF) were prepared by sol-gel method. The effect of preparation methods on the microstructure of the prepared fuel cells was analyzed by SEM . It shows that the cells prepared by the co-pressing/co-sintering method possess a dense electrolyte layer and a compact interface between electrolyte and anode but a curved configuration, while those prepared by the colloidal technique have a flat configuration but the electrolyte layer is not dense enough. The maximum output power density of …
Electrochemical Reduction Of Nitrobenzene On The Wc Electrode In Acidic Solution, Chun-An Ma
Electrochemical Reduction Of Nitrobenzene On The Wc Electrode In Acidic Solution, Chun-An Ma
Journal of Electrochemistry
The tungsten carbide (WC) electrode was constructed by using polyterafluoroethylene as binder. The electrochemical behavior of nitrobenzene on the WC electrode in acidic solution was investigated by cyclic voltammetry, linear scan method and chronoamperometry. Experimental results showed that WC electrode had good activity for the electrochemical reduction of nitrobenzene, and the electrode process was controlled by diffusion and electrochemical stepssimultaneously. The apparent active energy of the electrode process is 23.7kJ mol~(-1), while the active energy of the electrochemicalstep is 10.91kJ mol~(-1).
Adual-Celltechnique And Its Application In Electrocatalytic Study Of Pt-Ru Metals, Lei Su, Bing-Liang Wu
Adual-Celltechnique And Its Application In Electrocatalytic Study Of Pt-Ru Metals, Lei Su, Bing-Liang Wu
Journal of Electrochemistry
Two local electrochemical reactive interfaces are established using two strips of Nafion~ membrane separated each other, which are in contact with different surface regions of the same metal-sheet working electrode. One potentiostatis used to control thepotentialof one electrochemical reactive interface to generate adsorbed surface speciesand the other potentiostatto hold the potential of the second interface as a detector of the intermediate. The adsorbed surface species driven by the difference in surface concentration diffuses alongthe surface of the metal-sheet between both local electrochemical interfaces and can be detected at the second interface when they achieveover there.The surface diffusion coefficient of the …
Synthesis Of (S)-3-Phenylpropane-2-Tert-Butoxycarbonylamino- 1-Thiol And Its Electrochemical Behavior Self-Assembled On Gold, Sun Ru
Journal of Electrochemistry
The synthesis of (S)-3-Phenylpropane-2-tert-butoxycarbonylamino- 1-thiol(N-Boc-APT) from L-phenylalanine was reported. L-Phenylalanine was reduced to the corresponding amino alcohol, protection of the amino group using tert-butyl pyrocarbonate gave (S)-2-tert-butoxycarbonylamino-3-phenylpropane-1-ol, which was then O-mesylated and treated with potassium thioacetate in DMF to give 3-phenylpropane-2-tert- butoxycarbonylamino-1-etylmercapto. After the acetyl group was removed with ammonia in alcohol, the desired target molecular was obtained. The structure of intermediate and target molecular was conformed by IR and ~(1)HNMR. We made N-Boc-APT self-assemble-modificated gold electrode and investigated its electrochemical behavior. The CV results of methylene blue on nano-Au/N-Boc-APT SAM/Au electrode showed that nano-Au could speed this electron transfer …
Lithium Insertion Into Tio_2(B) Nanobelts Synthesized By The "Soft Chemical" Method, Cha-Geng Nie, Zheng-Liang Gong, Lan Sun, Juan Zuo, Yue-Kun Lai, Chang-Jian Lin
Lithium Insertion Into Tio_2(B) Nanobelts Synthesized By The "Soft Chemical" Method, Cha-Geng Nie, Zheng-Liang Gong, Lan Sun, Juan Zuo, Yue-Kun Lai, Chang-Jian Lin
Journal of Electrochemistry
TiO_(2)(B) Nanobelts were synthesized by using the "Soft chemical"method. The products were characterized by means of transmission electron microscope(TEM), X-ray diffraction(XRD), Raman spectrum and energy dispersive spectrum(EDS). Galvanostatic charging and discharging tests showed that lithium-ion intercalation/deintercalation occurred reversibly in the TiO_(2)(B) nanobelts electrode, and a high capacity (265 mAh·g~(-1)) can be obtained. The results suggested that TiO_(2)(B) Nanobelts might be a promising negative electrode material of second Lithium battery.
Preliminary Study Of Speek Membranes For Direct Methanol Fuel Cells Application, Su-Zhen Ren
Preliminary Study Of Speek Membranes For Direct Methanol Fuel Cells Application, Su-Zhen Ren
Journal of Electrochemistry
This paper describes the methanol permeability characterization of SPEEK membranes and their feasibility for DMFC application. The SPEEK membranes showed a significant lower methanol permeation than Nafion~115 determined from voltammetric methods. An increase in open circuit voltage was found in the performance of SPEEK membranes in DMFC. The power density of the cell using SPEEK membrane was considerably poorer than that of Nafion~115. If modified properly, the SPEEK membranes can be chosen for DMFC application based on this study.
Study On An Intermediate Temperature Planar Solid Oxide Fuel Cell, Shao-Rong Wang, Wen-Xia Chen, Ting-Lian Wen, Jia-Di Cao, Zhi-Yi Lv, Da-Qian Wang
Study On An Intermediate Temperature Planar Solid Oxide Fuel Cell, Shao-Rong Wang, Wen-Xia Chen, Ting-Lian Wen, Jia-Di Cao, Zhi-Yi Lv, Da-Qian Wang
Journal of Electrochemistry
Tape cast method was applied to prepare green sheets of Ni/YSZ anode supported YSZ thin film. After isostatic pressure treatment and cosintering, the YSZ film on the Ni/YSZ anode was gas-tight dense, and 15~30 μm thick. The area of the composite film was over 100 cm~(2). A Ce_(0.8)Sm_(0.2)O_(1.9 )(CSO) interlayer was sintered on to the YSZ electrolyte film to protect La_(0.6)Sr_(0.4)CoO_(3 )(LSCO) cathode from reaction with YSZ at high temperatures. The LSCO cathode layer was screen printed onto the CSO interlayer and sintered at 1 200 ℃ for 3h to form a single cell. The obtained single cell was operated …
Electrochemical Lithium Insertion Of Nanosized Tio_2, Ying Lan, Jian-Wen Liu, Xue-Ping Gao, Xing-Di Zhou, Jin-Qiu Qu, Feng Wu, De-Ying Song
Electrochemical Lithium Insertion Of Nanosized Tio_2, Ying Lan, Jian-Wen Liu, Xue-Ping Gao, Xing-Di Zhou, Jin-Qiu Qu, Feng Wu, De-Ying Song
Journal of Electrochemistry
The protonic titanate nanotubes with the diameter of 10～15 nm were synthesized via hydrothermal method in NaOH solution and the calcined nanotubes at 500 ℃ were transferred to anatase nanorods with the diameter of 12～20 nm due to dehydration.The electrochemical behavior of the anatase nanorods as lithium insertion materials was examined. The results showed that the nanorod electrode had the high initial discharge capacity of 232 mAh/g and second reversible capacity of 198 mAh/g. The capacity of nanorod electrode maintained 152mAh/g after 20 cycles.
Direct Electron Transfer Of Redox Proteins And Enzymes Promoted By Carbon Nanotube, Chen-Xin Cai
Direct Electron Transfer Of Redox Proteins And Enzymes Promoted By Carbon Nanotube, Chen-Xin Cai
Journal of Electrochemistry
The redox proteins (enzymes), such as hemoglobin (Hb), horseradish peroxidase (HRP) and glucose oxidase (GOx) were immobilized on the surface of the carbon nanotube modified with glassy carbon (CNT/GC) electrode, respectively. The experimental results showed that the redox proteins (enzymes) underwent effective and stable direct electron transfer reaction at the surface of CNT/GC electrode with a pair of nearly symmetrical redox peaks in phosphate buffer solution. The formal redox potential, E~(0'), is almost independent on the scan rates, the average value of E~(0') for Hb, HRP and GOx is -0.343±0.001, -0.319±0.002 and -0.456±0.001 V (vs.SCE,pH 6.9), respectively. The dependence of …
Stability And Electrochemical Performance Of Nio Cathode Modified By Zno Additive For Mcfc In Molten Carbonates, Huang Bo
Journal of Electrochemistry
The ZnO/Ni composite cathode was fabricated by tape-casting method, which microstructures and phases were studied. The electrochemical behaviors of ZnO impregnated NiO cathodes were also evaluated in molten 62 mol%Li_2CO_3+(38 mol%) K_2CO_3eutectic at 650 ℃ by electrochemical impedance spectroscopy (EIS) as a function of ZnO content and immersion time. The ZnO impregnated nickel cathodes showed the similar porosity, pore size and morphology to the reference nickel cathode. The stability tests of ZnO impregnated NiO cathodes showed that the ZnO additive could dramatically reduce the solubility of NiO in a eutectic carbonate mixture under the standard cathode gas condition. The cathode …
Investigation Of Adsorption And Oxidation Behavior Of Isosafrole On A Smooth Pt, Xiao-Hong Zhang
Investigation Of Adsorption And Oxidation Behavior Of Isosafrole On A Smooth Pt, Xiao-Hong Zhang
Journal of Electrochemistry
The electro-oxidation of isosafrole on a smooth platinum electrode was investigated in the non-aqueous solution. The CV curve shows two oxidation peaks and one reduction peak in the potential region between -0.5 V and 1.95 V. The relation between the oxidation and reduction peaks has been determined also by CV. The adsorption behavior of isosafrole on Pt was also investigated.
Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li
Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li
Journal of Electrochemistry
The concentrationsof soluble Mn(Ⅲ) species,during the reduction ofelectrolytic MnO_(2) (EMD)in alkaline solution,have been monitored in situ by UV-visible spectroscopy. The concentration of Mn(Ⅲ) ion in solution changes with discharge time.The first electron discharge process of EMD can be described by three different steps: 1) the reduction of Mn~(4+)ions on the surface of EMD particles and the structural defect regions within the EMD,2) the reduction of Mn~(4+)ions in ramsdellite,3)the reduction of Mn~(4+)ions in pyrolusite. During the second electron discharge of EMD, the soluble Mn(Ⅲ) is reduced to Mn(Ⅱ) , then Mn(OH)_(2)and Mn_(3)O_(4)are formed.
Electrocatalytic And Lifetime Studies Of Commercial Catalystsin A Pemfc, Cheng Xuan
Electrocatalytic And Lifetime Studies Of Commercial Catalystsin A Pemfc, Cheng Xuan
Journal of Electrochemistry
A particularly designed H-type cell was used to simulate the operating condition of a hydrogen-air proton exchange membrane fuel cell (PEMFC). The electrocatalytic activity, morphology, structure and lifetime of commercially available catalysts, carbon support platinum (Pt/C) and unsupported platinum-ruthenium (Pt-Ru), were preliminary studied by carrying out electrochemical measurements and by SEM, XRD techniques. The catalysts were simultaneously tested in the H-cell under operation, and also separately tested in a conventional electrochemical cell for comparison. It was found that the characteristic peaks of hydrogen adsorption/desorption on cyclic voltammograms shifted considerably to a more positive direction for Pt/C, while a more negative …
Preparation, Characterization And Photoelectrochemical Activities Of Cu-Tio_2/Ito Films, Dong Shu
Preparation, Characterization And Photoelectrochemical Activities Of Cu-Tio_2/Ito Films, Dong Shu
Journal of Electrochemistry
Cu-TiO_(2)/ITO films were prepared by direct photo-reduction deposition of Cu~(2+) on TiO_(2)/ITO films. The nanocomposite films were characterized by UV-vis diffuse reflectance spectra (DRS), XRD spectra, Scanning Electron Microscope (SEM) technology, and photovoltage measurement. The feasibility of improving the photocatalytic activity of TiO_(2) film by combining the modification of Cu nanoparticles with the application of anodic bias was investigated. The experimental results showed that the deposited Cu has an apparent enhancement effect with respect to suppressing the recombination between the photogenerated charge carriers and enhancing the photocatalytic oxidation of formic acid. The combination could promote the photocatalytic oxidation of formic …
Progress In Research For Biofuel Cell, Yue Bao, Xia-Qin Wu
Progress In Research For Biofuel Cell, Yue Bao, Xia-Qin Wu
Journal of Electrochemistry
In this article, research progresses of the biofuel cell in recent years were summarized. The operation principle and classification of the biofuel cells were described. The role of the mediator for promoting electron transfer in biofuel cells and the techniques for improving the electric properties of biofuel cells, such as output potential, were discussed with some attracting research instances. Finally, the choke points for research of biofuel cell were explored, and the application prospect of biofuel cells was forecasted.
Preparation, Structure And Electrochemical Hydrogenation Of Carbon Nanotubes Supported Platinum Catalysts, Qing-Gang He, Xiao-Zi Yuan, Xian-Xia Yuan, Zi-Feng Ma
Preparation, Structure And Electrochemical Hydrogenation Of Carbon Nanotubes Supported Platinum Catalysts, Qing-Gang He, Xiao-Zi Yuan, Xian-Xia Yuan, Zi-Feng Ma
Journal of Electrochemistry
In this paper, Pt/CNTs catalyst was prepared and its electrocatalytic property was studied by obtaining cycling voltammetry curves (C-V) and Tafel curves. In addition, the XRD,XPS and TEM tests were carried out to determine the structure and composition of the catalysts. It can be found that the platinum loading has been increased significantly using a carbon nanotubes support. Dispersion of Platinum was better and gave more active sites. The electrochemical characteristic of Pt/CNTs was also more desirable than that of Pt/C catalyst(Johnson Matthey). In conclusion, carbon nanotubes can played a conspicuous role in "electrogenerative" processes of PEMFC hydrogenation reactor.
Study On Determination Of Iodine Ion At Chitosan Modified Glassy Carbon Electrode, Bin Liu, Xiang-Ying Sun, Jin-Rui Xu
Study On Determination Of Iodine Ion At Chitosan Modified Glassy Carbon Electrode, Bin Liu, Xiang-Ying Sun, Jin-Rui Xu
Journal of Electrochemistry
In this paper, a chitosan modified glassy carbon electrode was prepared by the method of covalent-bond reaction, and the anodic stripping voltammetric characteristics of iodine on the modified electrode was studied. The results showed that the modified electrode has higher adsorption and selectivity for I~-, and the sensitivity for I~- has been much improved in 0.1 mol·L~(-1) KH_2PO_4 solution (pH=4.0). The anodic stripping peak current of I~- on the modified electrode varied linearly with I~- concentration in the range of 2.0×10~(-6)～2.0×10~(-3) mol·L~(-1), and the detection limit reached 2.0×10~(-7) mol·L~(-1).