Engineering Commons^™

Automated Control System Design Manual For Plant Growth And Support, Brooke Benham

Biological and Agricultural Engineering Undergraduate Honors Theses

The “Automated Control System Design Manual for Plant Growth and Support” project contains a teaching manual for high school students and teachers to use to aid in teaching STEM subjects. Building confidence in students and encouraging the pursuit of STEM related fields is one of the primary functions. This project utilizes low cost instruments and freely available software to teach the construction, installation, programming, and application for an automated control system with emphasis on plant growth and regulation. The end result is a fully automated system that can be controlled wirelessly via an android application to monitor temperature, humidity, and …

Applying Heterogeneous Teams Of Robotic Agents Using Hybrid Communications To Mapping And Education, Jonathan M. West

Electrical and Computer Engineering ETDs

Robotic agents are being increasingly utilized to carry out tasks that are difficult or dangerous for humans. Many of these missions are best performed by heterogeneous teams of agents with various individual abilities. Communication among agents and with operators is a critical element in the performance and efficiency of these missions. Although radio frequency communications dominate the robotic networking field, they are limited in range and bandwidth due to spectrum congestion and subject to interference from noise or hostile jamming and can be intercepted. Optical communication has many advantages such as higher bandwidth and focused beam, however the line-of-sight requirement …

Smart Grid Technology In The Developing World, Jacob R. Young

Honors Projects

A smart grid is the integration of communication and information technologies with contemporary power infrastructure to enhance load service and to incorporate continually evolving end-use applications. It is the latest advancement in the areas of power generation, transmission and distribution. It has advanced beyond the traditional grid structure at every stage; a smart grid is capable of incorporating distributed generation (DG) renewable sources and has improved transmission capabilities through implementation of technologies such as Flexible AC Transmission Systems (FACTS). Through the addition of control technology in the distribution network a smart grid is able to implement “self-healing” and other methods …

Logic Tiles, Andrew Wheeler, Tristan Lennertz

Computer Engineering

This project was originally conceived by Professor Andrew Danowitz as he considered the restructuring of the introductory digital design course at Cal Poly. As it stands now, students apply their knowledge of boolean algebra and combinatorial logic through the programming of a Field Programmable Gate Array (FPGA) using a Hardware Descriptive Language (HDL). While this is the industry standard for designing large, complex digital circuits, and is an fundamental skill to learn, there is a lack of actual circuit building in the process that can cause a disconnect from theory to application for students who have little-to-no experience with digital …

Conceptual Understanding Of Threshold Concepts Of Electrical Phenomena: Mental Models Of Senior Undergraduates In Electrical Engineering, Mark T. Carnes

Open Access Dissertations

Every field of study has a set of domain-specific concepts that anyone who desires to work in that field must know and understand. Most students who pursue university degrees in engineering trust that their education is designed to provide them with this knowledge. But does it? In electrical engineering (EE), conceptual understanding of electrical phenomena has rarely been addressed. Even though the presumed goal of instructors and students alike is to learn the concepts of electrical phenomena well enough to be able to use the concepts to design useful things, it is difficult to determine whether this goal is being …

Process Development For The Fabrication Of Semiconductor Devices And Circuits Using Spin-On Dopant, Richard R. Ryan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Traditional approaches to semiconductor device fabrication are expensive and time consuming, making them out of reach for most universities and colleges. The objective of this thesis is to develop a process by which semiconductor devices and circuits can be implemented completely in-house using spin-on dopants (SODs), and low-cost transparency masks, to significantly reduce the lead time, complexity, and cost associated with device fabrication. This will allow hands on fabrication experience for students at universities and colleges without the traditional expensive device fabrication facilities. In addition, it will also allow students and professors to design, fabricate and test semiconductor devices and …

Exploratory Study Of Students' Representational Fluency And Competence Of Electric Circuits, William Fernando Sandchez Cossio

Open Access Theses

Electric circuits are extensively used in today’s devices as computers, phones, cameras and others. This makes them a crucial topic in engineering because almost every engineering branch could be related of used them at different levels. Even though their importance, students often struggle during the learning process of circuit analysis topics. Additionally, other very important abilities for engineering students are the capacities to create, use, express and think about models and representations of technical concepts; and the capacities to translate and map from one representation to another. These abilities are known as representational competence and representational fluency respectively.

The purpose …

Design And Evaluation Of The Impact Of A Multi-Agent Control System (Framework) Applied To A Social Setting, Perez Antonio Perez

Open Access Theses & Dissertations

The objective of this research is to design and analyze the performance of a new mechanism to improve the advising of students in a nontraditional environment. This nontraditional environment includes: a minority serving, commuter campus with a high percentage of transfer students. Specifically, these demographics are unable to keep a tightly controlled cohort of students flowing through to the completion of the curriculum. Students in these circumstances usually have varied course loads and competing priorities due to family and financial needs or other societal responsibilities. Therefore, there is a need for an individualized approach to advising.

University administrations face challenges …

Intrusion Detection System Of Industrial Control Networks Using Network Telemetry, Stanislav Ponomarev

Doctoral Dissertations

Industrial Control Systems (ICSs) are designed, implemented, and deployed in most major spheres of production, business, and entertainment. ICSs are commonly split into two subsystems - Programmable Logic Controllers (PLCs) and Supervisory Control And Data Acquisition (SCADA) systems - to achieve high safety, allow engineers to observe states of an ICS, and perform various configuration updates. Before wide adoption of the Internet, ICSs used "air-gap" security measures, where the ICS network was isolated from other networks, including the Internet, by a physical disconnect [1]. This level of security allowed ICS protocol designers to concentrate on the availability and safety of …

Seeds Of Solutions™: An Economical & Efficient Approach Towards Power Engineering Education, Eli Alvarez

Theses and Dissertations - UTB/UTPA

Power demands are set to increase over the next twenty years; however, research shows that there may be a shortage of power engineers due to an appreciable percentage of the current power engineer workforce retiring, insufficient enrollment in power engineering programs and a lack of emphasis in power engineering at the university level. This thesis provides supporting research for future power demands, workforce and faculty shortages. Using temporary research in modern learning / teaching styles, student / teacher perceptions, educational trends and regional course offerings, this thesis describes a learning approach towards power engineering education. Designed specifically for universities with …

Motor Protection Lab Experiment Using Sel-710, Ozro Corulli

Electrical Engineering

Advancements in microprocessor based relay technology for power protection applications provide quicker response times and new methods of mitigation. This project develops a lab experiment for Cal Poly class EE444 - Power Systems Laboratory based on the Schweitzer SEL-710 motor protection relay. Learning objectives for this lab include relay setup, programming, and protection schemes for the following conditions: undervoltage, loss of phase, fault, locked rotor, and thermal overload. Today, utility companies across the globe use SEL relays for primary system protection, putting engineers familiar with their operation in high demand.

Analysis Of Brownsville Public Utilities Board Hybrid Wind And Solar Energy Systems: Case Study And Analysis In Brownsville, Texas, Lina L. Chavez

Theses and Dissertations - UTB/UTPA

Engineers are tasked and responsible for studying and designing environmentally safer forms of electrical generation including wind and solar sources. A national effort to reduce dependency on foreign oil due to economic and environmental impacts is underway and race to full scale implementation of alternate energy sources is eminent. The question looms: Is renewable energy generation for residences feasible from an engineering and economic perspective? Although wind and solar generators are gaining ground on conventional generation methods in different sectors, lack of information with regards to design, implementation, and payback still remain a major roadblock. The objective of this case …

Student Contextualization In The History Classroom : The Roles Of Cognitive Apprenticeship And Teacher Epistemology, Tammy Lynn Clark

Legacy Theses & Dissertations (2009 - 2024)

Abstract

The Development Of A Mechatronics And Material Handling Course: Laboratory Experiments And Projects, James Shirley

All Theses

Mechatronic systems integrate technologies from a variety of engineering disciplines to create solutions to challenging industrial problems. The material handling industry utilizes mechatronics to move, track, and manipulate items in factories and distribution centers. Material handling systems, because of their use of programmable logic controllers (PLC), PLC networks, industrial robotics, and other mechatronic elements, are a natural choice for a college instructional environment. This thesis offers insight and guidance for mechatronic activities introduced in a laboratory setting. A series of eight laboratory experiments have been created to introduce PLCs, robotics, electric circuits, and data acquisition fundamentals. In-depth case studies synthesize …

The Social Construction Of Authorship: An Investigation Of Subjectivity And Rhetorical Authority In The College Writing Classroom, Johannah Rodgers

Dissertations, Theses, and Capstone Projects

Although we use the term author on a daily basis to refer to certain individuals, bodies of work, and systems of ideas, as Michel Foucault and other critics have pointed out, attempting to answer the question “What is an Author?” is by no means a simple proposition. And, starting from the position that there is no single, or definitive answer to this complex question, this dissertation seeks to contribute to the ongoing discussion of the genealogy of authorship by investigating the ways in which conceptions of the author have informed models of the writing subject in the field of rhetoric …

Fpga-Based Experiment Platform For Hardware-Software Codesign And Hardware Emulation, Yajuvendra Nagaonkar

Theses and Dissertations

An FPGA-based experiment platform for hardware-software codesign experiments was developed. The proposed platform would be used by an engineer who can be affiliated with academia, research or industry for codesign experiments or hardware emulation. The platform utilizes a combination of a microcontroller and a FPGA device to enable sufficient flexibility in exploring the design space to implement codesign experiments. The FPGA device operation is integrated with that of the microcontroller to provide an overall embedded solution for codesign experimentations. It is anticipated that the platform will be used in academia for educating the students the concepts of computer architecture and …