Engineering Commons^™

Comparison Of Timing Jitter In External And Monolithic Cavity Mode-Locked Semiconductor Lasers, Dennis J. Derickson, P. A. Morton, J. E. Bowers, R. L. Thornton

Electrical Engineering

A comprehensive timing jitter comparison is made for mode-locked semiconductor lasers using active, passive, and hybrid mode-locking techniques in both external and monolithic cavity configurations. Active mode locking gives the lowest residual rms timing jitter of 65 fs (150 Hz-50 MHz), followed by the hybrid and passive mode-locking techniques. It is found that monolithic cavity devices with all active waveguides have higher timing jitter levels than the comparable external cavity case.

Neural Control Of Smart Electromagnetic Structures, Michael Thursby, Kisuck Yoo, Barry G. Grossman

Electrical Engineering and Computer Science Faculty Publications

Artificial neural networks (ANNs) and their ability to model and control dynamical systems for smart structures, including sensors, actuators, and plants, are directly applicable to the smart electromagnetic structures (SEMS) concept. The application of neural networks to the area of controls is being reported frequently. The ability of a structure to adapt to impinging electromagnetic (EM) energy will allow the structure to change its reflection characteristics and thus to change its radar signature. By embedding a control element in the structure of a single microstrip patch element, its electrical characteristics can be changed. If such an element can be controlled …

Composite Damage Assessment Employing An Optical Neural Network Processor And An Embedded Fiberoptic Sensor Array, Barry G. Grossman, Xing Gao, Michael H. Thursby

Electrical Engineering and Computer Science Faculty Publications

This paper discusses a novel approach for composite damage assessment with potential for DoD, NASA, and commercial applications. We have analyzed and modeled a two dimensional composite damage assessment system for real-time monitoring and determination of damage location in a composite structure. The system combines two techniques: a fiberoptic strain sensor array and an optical neural network processor. A two dimensional fiberoptic sensor array embedded in the composite structure during the manufacturing process can be used to detect changes in the mechanical strain distribution caused by subsequent damage to the structure. The optical processor, a pre-trained Kohonen neural network, has …

Electrical Characterization Of Metal‐Insulator‐Semiconductor Diodes Fabricated From Laser‐Ablated Yba2Cu3O7−Δ/Yttria‐Stabilized Zirconia Films On Si Substrates, Eric M. Ajimine, Felino E. Pagaduan, M. Mahmudur Rahman, Cary Y. Yang

Electrical and Computer Engineering

The purpose of this investigation is to study the electrical properties of the YBCO/YSZ/Si metal‐insulator‐semiconductor structure and the yttria‐stabilized zirconia (YSZ)/Si interface. The YBCO and YSZ layers were epitaxially grown in situ on Si by pulsed laser deposition. Current‐voltage measurements of devices fabricated on p‐type Si(100) showed a small leakage current density at 292 K, which decreased further at 80 K. Comparison of capacitance‐voltage measurements at 292 K for frequencies between 10 and 400 kHz showed a large variation of capacitance in the accumulation region demonstrating the presence of mobile ions in the YSZ layer. This variation is less pronounced …

Improved Efficiency In Semiconducting Polymer Light-Emitting Diodes, David Braun, A. J. Heeger, H. Kromer

Electrical Engineering

We report visible light emission from metal-polymer diodes made from semiconducting polymers, with indium-tin oxide as the “ohmic” contact, and a variety of metals as the barrier metal. Our results, which confirm the discovery by the Cambridge group [Nature347, 539 (1990)], demonstrate that light-emitting diodes can be fabricated by casting the polymer film on indium-tin oxide from solution with no subsequent polymer processing or heat treatment required. Electrical characterization reveals diode behavior with rectification ratios greater than 105 at sufficiently high voltages. Use of an electrode material with low work function leads to more than an order of magnitude improvement …

A Note On Repeated-Root Cyclic Codes, Robert H. Morelos-Zaragoza

Faculty Publications

In papers by Castagnoli et al. and Van Lint, cyclic codes with repeated roots are analyzed. Both papers fail to acknowledge a previous work by Chen, dating back to 1969, which includes an analysis of even, length binary cyclic codes. Results from Chen’s study are presented.

Analysis Of Baseband Equivalent Noise In A First-Order Correlation Loop Utilizing Filtered Pseudonoise Signals, Kurt Louis Kosbar, Christopher J. Scholten

Electrical and Computer Engineering Faculty Research & Creative Works

Conventional direct-sequence and frequency-hopping spread spectrum systems utilize delay-lock loops to track the timing epoch of pseudonoise codes. These devices perform admirably at high signal-to-noise ratios (SNR), however, they are suboptimal at moderate and low SNR. A correlation loop that employs appropriately filtered pseudonoise signals for the local cross-correlation waveform may have superior performance under these conditions. The performance of this modified correlation loop will be determined by the cross correlation function of the transmitted waveform and locally generated reference signals, along with the statistics of the baseband equivalent noise process. In this work, we find the statistics of the …

Temperature Dependence Of Optical Properties Of Gaas, Huade Yao, Paul G. Snyder, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

Pseudodielectric functions (ε) = (ε₁) + i (ε₂) of GaAs were measured by spectroscopic ellipsometry (SE), in the range of 1.W.45 eV, at temperatures from room temperature (RT) to ~610 ° C. A very clean, smooth surface was obtained by first growing an epitaxial layer of GaAs on a GaAs substrate and immediately capping it with a protective layer of arsenic. The cap prevented surface oxidation during transport to the measurement chamber, where it was evaporated under ultrahigh vacuum at ~350 °C. Room-temperature SE results from this surface are in good agreement with those in the …

Field-Equation Approximations And Amplification In High-Gain Lasers: Numerical Results, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

It has recently been shown that a field-equation time-derivative approximation that is commonly used in studies of laser-oscillator dynamics is not necessary and can lead to significant errors for some lasers. A related space-derivative approximation is widely used in studies of steady-state laser amplifiers. A more rigorous amplifier formalism is developed here, and the results are exact solutions of Maxwell’s equations. The improved model predicts a spatial instability, single mirror oscillation, and other interesting field behavior.

Field-Equation Approximations And Amplification In High-Gain Lasers: Analytical Results, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

In a related study the equations governing a high-gain laser amplifier have been solved numerically without making the usual slowly-varying-amplitude derivative approximation in Maxwell’s equations, and thus the field amplitudes are not restricted to vary negligibly in a distance of one wavelength. The results reveal an instability that involves reflections and oscillatory growth of perturbations away from steady state. In the present study steady-state solutions of the field equations are obtained analytically, and transformations are described for converting the equations to alternative intensity-equation sets. These intensity equations are linearized and solved for the growth rate and oscillation period of the …

Efficient Single-Heterojunction Al0.27Ga0.73As/Gaas P-I-N Photodiodes With 22-Ghz Bandwidths, C. Johnson, S. Sloan, D. M. Braun, J. L. Russell, M. Zurakowski, M. Lightner, F. Kellert, G. Patterson, R. Koo, Dennis J. Derickson, J. E. Bowers

Electrical Engineering

A report is presented on the design, fabrication, testing, and modeling of single-heterojunction Al_0.27Ga_0.73As/Ga p-i-n photodiodes for use as components in optical receivers. The photodiodes are grown by molecular beam epitaxy and fabricated as 1100-μm² mesa structures. At 5-V reverse bias and 850 nm, 100 fF of capacitance, 90 pA of leakage current, 73% external quantum efficiency, <2% reflectivity, and 22-GHz bandwidths are typically measured.

Electromagnetic Field Plot Of An Inductive Window By The Moment Method, John R. Natzke, Mark R. Wolski, Thomas Koryu Ishii

Faculty Publications - Department of Electrical Engineering and Computer Science

A moment method is used to plot the electromagnetic field of an inductive window in a TE10 -mode rectangular waveguide. Green's dyadic functions are derived based on Tai's approach, which is a modified form of Hansen's vector wave functions. Based on the computed electric fields, the S matrix and the equivalent aperture reactance of the waveguide window are calculated. This calculation agrees with the previously published closed-form results of Marcuvitz.

Transmission Ellipsometry On Transparent Unbacked Or Embedded Thin Films With Application To Soap Films In Air, R. M.A. Azzam

Electrical Engineering Faculty Publications

The ratio ρ_t = T_p/T_s of the complex amplitude transmission coefficients for the p and s polarizations of a transparent unbacked or embedded thin film is examined as a function of the film thickness-to-wavelength ratio d/λ and the angle of incidence Φ for a given film refractive index N. The maximum value of the differential transmission phase shift (or retardance), Δ_t = argρ_t, is determined, for given N and Φ, by a simple geometrical construction that involves the iso-Φ circle locus of ρ_t in the complex plane. The …

Investigation Of Real-Time Optical Scanning Holography, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

Real-time holographic recording using an optical heterodyne scanning technique was proposed by Poon in 1985. The first part of this dissertation provides a detailed theoretical treatment of the technique, based on a Gaussian beam analysis. Topics to be addressed include the derivations of the optical transfer function (OTF) and impulse response of the scanning holographic recording system, reconstructed image resolution and magnification, methods of carrier frequency hologram generation and experimental verification of the recording technique based on careful measurements of a hologram corresponding to a simple transmissive slit. Furthermore, computer simulations are presented pertaining to the incoherent nature of the …

High-Frequency Electrooptic Fabry-Perot Modulators, R. J. Simes, R. H. Yan, C. C. Barron, Dennis J. Derickson, D. G. Lishan, Judy R. Karin, L. A. Coldren, M. Rodwell, S. Elliott, B. Hughes

Electrical Engineering

Electrooptic modulators built from GaAs/Al_xGa_1-xAs Fabry-Perot cavities operating up to 6.5 GHz are reported. The measured frequency response agrees well with the one predicted using an equivalent circuit model derived from high-speed electrical measurements. The parasitic capacitances have been reduced to approximately 30 fF by fabricating the devices on semi-insulating GaAs substrates and integrating them with on-wafer bound pads which have dimensions compatible with microwave coplanar probes.

Pump Polarization Effects In Cw Dye Lasers, Lee W. Casperson, W. J. Sandle, A. C. Wilson, D. M. Warrington, R. J. Ballagh

Electrical and Computer Engineering Faculty Publications and Presentations

The effects of pump polarization on the performance of cw dye lasers have been investigated. A recently developed semiclassical model for synchronously pumped mode‐locked dye lasers is adapted to the problem of cw dye‐laser oscillation, and analytic expressions are obtained for the relationship between the pump power, pump polarization, and dye‐laser output power. The theoretical results are compared with experimental data obtained using an argon‐laser‐pumped rhodamine 6G dye laser.

Spaceborne Radar Measurement Of Wind Velocity Over The Ocean-An Overview Of The Nscat Scatterometer System, David G. Long, F. M. Naderi, Michael H. Freilich

Faculty Publications

Scatterometry and scatterometer design issues are reviewed. The design of the NASA Scatterometer (NSCAT) to be flown on the Japanese ADEOS mission is presented. Building on Seasat experience, the NSCAT system includes several enhancements, such as three antenna azimuths in each of two swaths, and an onboard digital Doppler processor to allow backscatter measurements to be colocated everywhere within the orbit. These enhancements will greatly increase the quality of the NSCAT wind data. The ground processing of data is discussed, and scatterometers of the next decade are briefly described.

Visible Light Emission From Semiconducting Polymer Diodes, David Braun, A. J. Heeger

Electrical Engineering

We report visible light emission from Shottky diodes made from semiconducting polymers, confirming the discovery by the Cambridge group [Nature 347, 539 (1990)]. Our results demonstrate that light-emitting diodes can be fabricated by casting the polymer film from solution with no subsequent processing or heat treatment required. Electrical characterization reveals diode behavior with rectification ratios greater than 104. We propose that tunneling of electrons from the recitifying metal contact into the gap states of the positive polaron majority carriers dominates current flow and provides the mechanism for light emission.

Field-Equation Approximations And The Dynamics Of High-Gain Lasers, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

Semiclassical models for laser-dynamics studies typically incorporate a derivative approximation that reduces the second-order wave equation for the electric field to a first-order equation. It is shown here that this approximation and further frequency approximations are not necessary and may lead to significant errors for some high-gain laser systems. A more exact analysis also reveals a partial decoupling of the electric and magnetic fields that occurs with fast transient phenomena. These ideas are illustrated in terms of well-known dynamical effects.

Optical And Magneto-Optical Characterization Of Tbfeco Thin Films In Trilayer Structures, William A. Mcgahan, Ping He, Liang-Yao Chen, Sal Bonafede, John A. Woollam, F. Sequeda, T. Mcdaniel, H. Do

Department of Electrical and Computer Engineering: Faculty Publications

A series of TbFeCo films ranging in thickness from 100 to 800 Å have been deposited in trilayer structures on silicon wafer substrates, with S₃N₄ being employed as the dielectric material. These films have been characterized both optically and magneto-optically by variable angle of incidence spectroscopic ellipsometry, normal angle of incidence) reflectometry, and normal angle of incidence Kerr spectroscopy. From these measurements, the optical constants n and k have been determined for the TbFeCo films, as well as the magneto-optical constants Ql and Q2. Results are presented that demonstrate the lack of dependence of these …

Study Of Joint Flexibility In Steel Frame Structures, Randy R. Frank

Opportunities for Undergraduate Research Experience Program (OURE)

Joint flexibility plays an important role in the distribution of strains and displacements in the frame structures of buildings, towers, automobiles, etc.. The objective of this project is to study the effect of flexibility (or rigidity) of two simple mechanical joints in frame structures on the stress and displacement distributions, using both experimental and analytical methods. Three welded and three bolted samples were fabricated using A-36 low carbon steel in a two column and horizontal crossmember (table) arrangement. This arrangement allows for both shear forces and axial forces in the joint. From a three element rectangular rosette strain gage attached …

Identity Authentication Based On Keystroke Latencies Using Neural Networks, Angela Lammers, Sharon Langenfeld

Opportunities for Undergraduate Research Experience Program (OURE)

Most computer security systems verify the identity of a user through objects in the user's possession such as keys or magnetic cards, or through knowledge the user has, such as a password or PIN number. There are, however, two other methods of user verification, which have as yet received little or no attention. There has been some work done on the third method, recognition of physiological patterns (such as finger prints, retinal patterns, or voice patterns), but this work has been limited and requires expensive hardware to implement. The final method of user verification is through actions such as signature …

Magneto-Optical Kerr Effect And Perpendicular Magnetic Anisotropy Of Evaporated And Sputtered Co/Pt Multilayer Structures, Ping He, William A. Mcgahan, John A. Woollam, F. Sequeda, T. Mcdaniel, H. Do

Department of Electrical and Computer Engineering: Faculty Publications

Thin and ultrathin Co/Pt multilayered structures have been prepared on glass substrates by electron-beam evaporation at room temperature and by sputtering at various substrate temperatures and sputtering pressures. Perpendicular magnetic anisotropy was found in samples with Co/Pt bilayer thicknesses near 3 Å/l0 Å and total thicknesses of the layer stack of no greater than 300 Å. X-ray diffraction was performed on the samples to determine layer spacing and integrity, and possible crystallinity of films. Crystalline structures in the interface between the Co and Pt layers were found and identified. The effects of sputtering parameters, such as pressure and substrate temperature, …

A Computer Simulation Of The Umr Reactor, H. Allen Wilkins

Opportunities for Undergraduate Research Experience Program (OURE)

The Opportunities for Undergraduate Research project entitled, "A Computer Simulation of the UMR Reactor" had two goals. To produce a reactor simulation to be used in creating an artificial intelligence based reactor simulation for the UMR Nuclear Reactor and to produce a means of teaching students the fundamentals of reactor operations.

The primary purpose was to create a program which would simulate all the situations one would encounter in actual reactor operation. With the simulator the artificial intelligence system could be thoroughly tested before use with actual reactor data.

This same simulator would be used as a teaching aid for …

Measurement Of Voltage And Current In Electric Power Systems, Michael Davis

Opportunities for Undergraduate Research Experience Program (OURE)

A. B. Chance Company of Centralia, Missouri requested a study of the latest state-of-the- art technology to measure voltage and current on a normal distribution power line. (4kV - 35kV)

The particular device that A. B. Chance needs must be relatively inexpensive, $200.00 per measurement, reliable, and capable of being manufactured by them.

Four types of power line measurement techniques were investigated; electrooptics/magnetooptics, present day measurement devices, the Raychem Line Monitor, and remote voltage and current sensing (RVCS).

The remote voltage and current sensing idea is the basis of the following report.

The Detection And Quantification Of Atrophic Rhinitis Using Ditigal Image Processing Techniques, Timothy Mussman

Opportunities for Undergraduate Research Experience Program (OURE)

This project focuses its attention on the detection and quantification of Atrophic Rhinitis (A.R.), a disease prevalent in pigs. A.R. causes some of the bony structure in a pig's snout to atrophy, which exposes the animal to other diseases that may effect its growth. It is studied by examining a cross section of the pig's snout. By comparing areas and perimeters of the nasal cavity to bony structures, or turbinates in the snout, one can determine the severity of the atrophy. Currently, the veterinarians diagnosis is based on a subjective analysis of the snout. The problem with this method is …

Border Detection Of Skin Tumor Images, Mike Tiehes

Opportunities for Undergraduate Research Experience Program (OURE)

Border detection of skin tumor images is part of a research project whose purpose is to identify key features in skin tumor images using machine vision techniques. The key features present in a skin tumor guide the dermatologist in making the proper diagnosis. A few examples of key features are crust, scale and ulcer.

Bundled Cable Parameters And Their Impact On Emi Measurement Repeatability, Deanna L. Weil

Opportunities for Undergraduate Research Experience Program (OURE)

This research project was 99% experimental, therefore, not many theoretical ideas will be presented. The main idea behind the project was centered around cable bundling. The effect of cable bundling using analytical measurements and data from a network analyzer was investigated.

Noise Generators For The Simulation Of Digital Communication Systems, Martina F. Schollmeyer, William H. Tranter

Electrical and Computer Engineering Faculty Research & Creative Works

The generation of random numbers, having uniform and Gaussian distributions, with application to the time-domain simulation of communication systems is considered. The specific goal is to identify appropriate noise generation algorithms for use in system simulations for the determination of the symbol error probability of a digital communication system. Several methods of generating both uniform and Gaussian random numbers are examined. The algorithms considered were taken from those discussed in recent literature that appeared most appropriate for our problem. The algorithms were programmed in FORTRAN for use on a PC with math-coprocessor. Tests to evaluate the statistical properties of the …

An Architecture Level Simulation Methodology, Paul D. Stigall, Ram Huggahalli

Electrical and Computer Engineering Faculty Research & Creative Works

Using the Architecture Design and Assessment System (ADAS), the Processor Level Architecture of an Example Computer System is First Represented as a Directed Graph. Then, a Method of Simulating Instruction Execution as a Sequence of Data Transfers between the Nodes of the Graph is Presented. the Simulation Methodology Provides Flexibility in Observing the Architecture Dynamically at the Processor Level. an Example Application for Functional Verification is Discussed. Development of Techniques to Convert Programs into Node Sequences And, to Assign Appropriate Delays to the Nodes is Necessary to Further Enhance the Applicability of the Methodology. Functional Verification and Performance Estimation through …