Engineering Commons^™

Implementation Of New System For Oxygen Generation And Carbon Dioxide Removal, Angelo Peter Karavolos

Open Access Theses & Dissertations

This research effort develops an integrated system for CO2 removal and O2 production. A unique material, dodeca-tungsto-phosphoric acid (H3PO4W12O3; henceforth referred to as DTPA) is mixed with tetra-ethyl-ortho-silicate Si(OC2H5)4 or TEOS. This mixture exhibits unique properties of heat absorption and high electrical conductivity. In the system described herein, the DTPA resides within a cross linked arrangement of TEOS. The DTPA furnishes a source of O2, while the TEOS furnishes structural support for the large DTPA crystals. In addition, the large amount of H2O within the crystal also adsorbs CO2. It can also be cross-linked with other polymers such as polycarbonate, …

A Spatially Variant Metamaterial Design Process For Transformation Electromagnetic Devices, Eric Alan Berry

Open Access Theses & Dissertations

A technique for the implementation of devices designed using transformation optics (TO) is presented using metamaterial elements arranged using spatially variant lattices. A description of transformation optics, including the design of arbitrarily shaped devices by solving Laplace's equation numerically, is discussed. Analysis of a variety of metamaterial unit cells using frequency sweeps of the unit cells with the resulting permittivity and permeability values. Metamaterial unit cells are also analyzed by the scaling of all the features of the metamaterial elements in the unit cell and calculating the permittivity and permeability. Finite- difference time domain (FDTD) and finite-difference frequency domain (FDFD) …

Validation Of An Error Sonification Auditory Feedback Training Program On Proper Sagittal Plane Squat Technique, Rena Hale

Open Access Theses & Dissertations

Osteoarthritis (OA) is one of the most common degenerative joint diseases that hinders an individual's quality of life. A large portion of knee OA instances can be correlated to previous anterior cruciate ligament (ACL) injury. Knee joint injury leading to OA is most prevalent in males aged 20-55 years old and can be caused by improper form during execution of a given task or lack of neuromuscular control. Screening protocols are used to assess deficits of an athlete, with the goal of reducing the risk of injury during both training and in competition. Neuromuscular training programs have been created to …

Digital Processes And Characterization For Fabricating 3d Rf Devices, Harvey Hing Tsang

Open Access Theses & Dissertations

In this work, co-planar waveguides (CPW) are fabricated and characterized with low temperature 3D printed materials for flexible electronic applications. Laser processing is introduced to reduce heating and cooling times for curing and subtractive manufacturing. CPWs are optimized by varying printing resolution, adjusting curing conditions and shaping conductor profile with a pico-laser. By using acrylonitrile butadiene styrene (ABS) as substrate material and Dupont CB028 as conductive material, a high S21 and low S11 CPW is fabricated. Optimized direct write methods are dispensed onto 3D complex structures to move away from 2.5D style printing and move into true 3D printed antenna …

Dielectric Prism Antenna, Jose Antonio Avila

Open Access Theses & Dissertations

3D printing is revolutionizing the development and manufacturing of devices. Currently multi-material 3D printing, like metals plus dielectrics, is in the early stages and not very accessible. This work set out to develop an all-dielectric antenna that could be 3D printed with current widely accessible 3D printing technologies. The antenna developed is an all-dielectric ultra-thin antenna with a simple geometry. The antenna radiates by using total internal reflection and a circulating mode operating as a leaky whispering gallery mode. We are calling the antenna the dielectric prism antenna because it acts like an optical prism. The dielectric prism antenna was …

Towards The Scalability And Hybrid Parallelization Of A Spatially Variant Lattice Algorithm, Henry Roger Moncada Lopez

Open Access Theses & Dissertations

The purpose of this research is to design a faster implementation of the spatially variant algorithm that improves its performance when it is running on a parallel computer system.

The spatially variant algorithm is used to synthesize a spatially variant lattice for a periodic electromagnetic structure. The algorithm has the ability to spatially vary the unit cell orientation and exploit its directional dependencies. The algorithm produces a lattice that is smooth, continuous and free of defects. The lattice spacing remains strikingly uniform when the unit cell orientation, lattice spacing, fill fraction and more are spatially varied. This is important for …

Stem Cell Induction Via Inkjet-Mediated Gene Transfection, Gilbert Paquian Jr.

Open Access Theses & Dissertations

In 2009 and 2011, it was shown that micropores in the cell membrane that form during inkjet cell printing are a potential vector for gene transfection1,2. These papers showed that porcine aortic endothelial cells and Chinese hamster ovary cells were coprinted with green fluorescent protein-coding (GFP) plasmids onto collagen or gelatin "biopaper" substrates. Printed cells showed a viability of ~90% with transfection efficiencies ranging from 2-30%1,2. Using inkjet-mediated gene transfection (IMGT) to insert a plasmid coding for the Yamanaka stem cell induction factors, it may be possible to offset common drawbacks of the induction process, such as low efficiency, throughput, …

G-Code Generation For Multi-Process 3d Printing, Callum Peter Bailey

Open Access Theses & Dissertations

Since the inception of stereolithography in the 1980s, interest in 3D printing has exploded, with desktop 3D printers now commercially accessible to the general public. In recent years, next-generation multifunctional technologies have been developed, which combine 3D printing with other technologies such as wire embedding, foil embedding, CNC machining, and robotic component placement, enabling complex parts to be made on a single multifunctional machine.

However, the complexity of these integrated processes exceeds the capabilities of established design tools. To this end, this Thesis aims to develop a multi-functional design solution that can automatically generate final control code for next-generation multifunctional …

Adaptive Switched Capacitor Voltage Boost For Thermoelectric Generation, Rene A. Brito

Open Access Theses & Dissertations

Thermoelectric generators (TEG) and other forms of energy harvesting often provide voltages that are not directly usable by traditional electronics as levels are too low from the TEG. While increasing the number of thermoelectric elements can ultimately increase the power output, there is a tradeoff between size and power. By implementing charge pumps, a proposed circuit technique is described that can boost the TEG output to levels that can be used for energy harvesting applications. Current voltage boost circuits for TEGs simply boost a voltage by a set amount. The proposed circuit consists of an analog chip, to provide several …

Modeling Of Piezoelectric Traveling Wave Rotary Ultrasonic Motors With The Finite Volume Method, Ivan Arturo Renteria Marquez

Open Access Theses & Dissertations

In 1983 Toshiiku Sashida developed a new motor concept called Piezoelectric Traveling Wave Rotary Ultrasonic Motor (PTRUSM). The advantages of these motors include high torque at low speed, absence of a generated magnetic field, and high potential for miniaturization. Unfortunately PTRUSMs have some disadvantages that limit the areas of applications for these types of motors. The disadvantages are a short operating life (about 1000 hours), small output power, and the need of a complex motor controller.

On one hand, these motors have been used in satellites, mobile phones, photocopiers, robotic arms, telescopes, automobiles, and camera autofocusing. On the other hand, …

Blind Image Deconvolution Based On Sparsity: Theoretical Justification And Improvement Of State-Of-The-Art Techniques, Fernando Cervantes

Open Access Theses & Dissertations

Observed signals and images are distorted by noise and blurring. In precise terms, blurring is a convolution of the original image with some blurring function. From this viewpoint, to reconstruct the original image, we need to reverse the effects of this convolution, i.e., to ``deconvolve'' the image. Many efficient methods for image deconvolution are known. However, most of these methods assume that we know the blurring function -- or at least that we have some partial information about the blurring function. In some practical situations, however, we do not have this information. In such situations, we need to perform, blind …

Creating Multi-Functional G-Code For Multi-Process Additive Manufacturing, Efrain Aguilera Jr

Open Access Theses & Dissertations

Additive manufacturing (AM) started over thirty years ago and with it a manufacturing revolution that moves industrial production into the personal home. With recent interest shifting into multi-functional parts fabricated through AM technologies, unified systems are being developed. Merging different manufacturing technologies into one single machine is a challenge but undergoing research has shown promise in the development of multi-functional systems. Concurrent work is being done in the software, automation, and hardware aspect of multi-functional systems. An effort to use industry compatible Computer Aided Design (CAD) software to design multi-functional parts including circuits, micro-machining, and foil embedding then exporting and …

The Viability Of High-Frequency Oscillation Analysis In Eeg Signals For Seizure Prediction, Bryan David Kern

Open Access Theses & Dissertations

Seizure prediction is a decades-old research problem that has yet to reach any satisfying conclusions. Many studies have tackled the problem with varying results, but there has yet to be any major breakthroughs that define the direction of all future research. However, a promising, new predictor may have presented itself in recent years in the form of high frequency oscillations (HFOs). With the discovery of HFOs (80 - 800 Hz) as a biomarker for epilepsy, new interest has been placed in studying the high frequency content of EEGs to find a possible link between epilepsy and HFOs. In this paper, …

Development And Initial Testing Of A Low-Cost, Electronic, Microprocessor-Controlled Prosthetic Knee, Lucas Jonathan Galey

Open Access Theses & Dissertations

Cost-effective lower-limb prostheses have been successful in restoring mobility, independence, and a way of life to millions of global amputees who do not have the means to afford more sophisticated prosthetics. Comprehensively, the current above knee (AK) prosthetic market is segmented into two extremes â?? very affordable relief style knees that offer basic functionality with high risk of accident due to falls, and very expensive styles that offer electronic microprocessor stumble control and adaptive cadence. There remains a gap for a middle-ground system that provides stumble control and greater stability within an achievable price bracket for the developing world. This …

Cdte Doped With Zn Grown On Si(111) And Si(211) Using The Closed Space Sublimation Method, Jose Alberto Valdez

Open Access Theses & Dissertations

Cadmium telluride (CdTe) doped with zinc (Zn) has been used for the fabrication of X-ray imaging devices. CdTe allows the device to have the same image quality at a lower X-ray dose. When silicon is used as a substrate for CdTe growth, this reduces the cost and allows the readout circuitry to be fabricated on the same substrate. However, material quality and device performance needs to be addressed since the lattice parameters of CdTe (6.482 Å) and Si (5.431 Å) result in a 19% lattice mismatch.

In this work, CdTe doped with Zn is deposited on Si (211) and Si …

Numerical Calculation Of Spatially Variant Anisotropic Metamaterial, Asad Ullah Hil Gulib

Open Access Theses & Dissertations

3D printing, or additive manufacturing, is rapidly evolving into a mainstream manufacturing technology that is creating new opportunities for electromagnetics and circuits. 3D printing permits circuits to fully utilize the third dimension allowing more functions in the same amount of space and allows the devices to have arbitrary form factors. 3D printing is letting us discover new physics that is not possible in standard 2D circuits and devices. However, evolving electromagnetics and circuits into three dimensions introduces some serious problems like thermal management, interference, and mutual coupling between the components which degrades performance and hurts signal integrity.

Metamaterials are engineered …

Touch And Step Potential Analysis At 23.9kv To 4.16kv & 13.8kv To 4.16kv Distribution Substations With Pad-Mounted Transformers, Floating Grounds, And Other Exposed Ungrounded Metal Bodies Using Winigs, David Guillermo Guzman

Open Access Theses & Dissertations

An electrical substation is composed of various subsystems that allow for the effective and safe operation of the power grid. One of the subsystems integrating a conventional substation is defined as the ground grid system. This system allows for the effective operation of the power grid and all the electrical equipment connected to it by providing a ground potential reference, commonly known as the system ground. In addition, the ground grid system provides safety to the workers and the public transiting inside or living nearby a substation by reducing the step and touch potential (or voltage) levels present during a …

Wettability Of Magnesium Based Alloys, Victor Manuel Ornelas

Open Access Theses & Dissertations

The premise of this project was to determine the wettability behavior of Mg-based alloys using three different liquids. Contact angle measurements were carried out along with utilizing the Zisman method for obtaining values for the critical surface tension. Adhesion energy values were also found through the use of the Young-Dupre equation. This project utilized the Mg-based alloy Mg-2Zn-2Gd with supplemented α-Minimum Essential Medium (MEM), Phosphate Buffer Saline solution (PBS), and distilled water. These three liquids are commonly used in cell cultivation and protein adsorption studies. Supplemented α-MEM consisted of α-MEM, fetal bovine serum, and penicillin-streptomycin. Mg-2Zn-2Gd was used because of …

Information Entropy Measures Applied To Hierarchial Complex Technical And Socio-Technical Systems, Satya Aditya Akundi

Open Access Theses & Dissertations

A significant increase of Systems-of-Systems (SoS) is currently observed in the social and technical domains. With increasing constituent components, Systems of Systems are becoming larger and more complex. Recent research efforts have highlighted the importance of identifying innovative statistical approaches for analyzing complex systems to better understand how they work. This research is aimed towards developing an Information Entropy based framework to analyze complex technical and social systems. Entropy in terms of information theory can be seen as the expected amount of information observed in an event. A parallel can be drawn between information entropy and system complexity, where, as …

Reliable And Secure Scada Framework For Residential Microgrid Communications, Goutham Krishna Chalamasetty

Open Access Theses & Dissertations

Cyber security is one of the major needs for electric power industry like many other industries and organizations. The advancements in technology provide numerous benefits to power industry as well as benefits cyber attackers to perform different cyber-attacks on the industry. Power system is a complex physical entity that deals with power generation, distribution, and transmission. In general, no individual or company or an organization can bear a one hour power cut, which shows the need for reliability in electric power industry.

In order to develop a reliable and secure Supervisory Control and Data Acquisition (SCADA) communication network, this Thesis …

Synthesis, Device Fabrication, And Characterization Of Two-Dimensional Molybdenum Disulfide, Gustavo Alberto Lara Saenz

Open Access Theses & Dissertations

The miniaturization of electronic devices according to Moore's Law has been propelled by the continuous demand for faster and smaller devices which continue to advance technology. One recent contribution to this trend was the isolation and characterization of one atom thick of graphite, known as graphene, which led to the Nobel Prize in physics in 2010 being awarded to Andre Geim and Konstantin Novoselov. Graphene and its related nanocarbon derivatives have exceptional mechanical, thermal, optical and electronic properties, making them a potential candidate for electronics and optoelectronics applications. However, this material has no intrinsic bandgap and complicated processes are required …

Design And Evaluation Of The Impact Of A Multi-Agent Control System (Framework) Applied To A Social Setting, Perez Antonio Perez

Open Access Theses & Dissertations

The objective of this research is to design and analyze the performance of a new mechanism to improve the advising of students in a nontraditional environment. This nontraditional environment includes: a minority serving, commuter campus with a high percentage of transfer students. Specifically, these demographics are unable to keep a tightly controlled cohort of students flowing through to the completion of the curriculum. Students in these circumstances usually have varied course loads and competing priorities due to family and financial needs or other societal responsibilities. Therefore, there is a need for an individualized approach to advising.

University administrations face challenges …

Vascularization In Interconnected 3d Printed Ti-6al-4v Foams With Hydrogel Matrix For Biomedical Bone Replacement Implants, Victor Correa

Open Access Theses & Dissertations

Abstract:

Vascularization or angiogenesis on newly implanted metal orthopedic implants has remained a challenge in the field of tissue engineering. In this research, an interconnected foam structure of Ti-6Al-4V was micro-fabricated by Electron Beam Melting (EBM) technique. The foam in question has a density of 1.77g/cm3 with 60% porosity and a tensile strength of 18GPa. An Extracellular Matrix based hydrogel was added as an aqueous matrix to the foam in question. Hypoxia mimetic stress has been closely related to many wound healing biomedical applications as it increases survival and proliferation molecular signals. To that end, increased expression of Hypoxia-Inducible Factor-1α …