Engineering Commons^™

A New Approach To Optimization Of Dynamic Reactive Power Sources Addressing Fidvr Issues, Weihong Huang

Masters Theses

Dynamic reactive power (var) sources, e.g. SVCs and STATCOMs, can effectively mitigate fault-induced delayed voltage recovery (FIDVR) issues or even voltage collapse. However, their optimal allocation in a power grid is a complicated nonlinear optimization problem since the post-fault voltage trajectories have to be solved to check constraints on voltage responses. Thus, solvers of both nonlinear optimization and power system differential and algebraic equations (DAEs) are required.

Currently, most of existing methods merely achieve dynamic optimization locally with great dependence on the initial operation point. Also, complicated algorithm and time consuming are obstacles for the practical implementation.

This thesis proposes …

A Low-Power Approach For Front End Biological Signal Conditioning, Logan Smith Taylor

Masters Theses

In a lab-on-a-chip (LOC) application, the measurement of small analog signals such as local temperature variation often involves detection of very low-level signals in a noisy micro-scale environment. This is true for other biomedical monitoring systems as well. These systems observe various physiological parameters or electrochemical reactions that need to be tracked electrically. For temperature measurement pyroelectric transducers represent an efficient solution in terms of speed, sensitivity, and scale of integration, especially when prompt and accurate temperature monitoring is desired.

The ability to perform laboratory operations on a small scale using miniaturized LOC devices is a promising biosensing technique. The …

On The Development Of Conductive Textile Antennas, Dounia Baiya

Masters Theses

UWB systems are becoming increasingly utilized due to their use in a variety of applications. Meanwhile, many advances have been achieved in the realm of conductive textiles. These textiles can be used as a sensing system or implemented wearable antennas. Combining these two applications is attractive for a number of reasons. First, wearable antennas constructed entirely from fabric offer a cost- effective, flexible solution when compared to rigid antennas. Second UWB technology is also attractive for body area network applications due to the low power operation and the inherent low radiated power in its system design.

In our implementation accurately …

An Autonomous Online I-V Tracer For Pv Monitoring Applications, Cameron William Riley

Masters Theses

With the unprecedented growth of photovoltaic technologies and their implementation in recent times, more precise methods of determining modules health, degradation, and performance are needed. Current monitoring efforts are helpful in determining these attributes but do not provide all of the information necessary to truly understand the health properties of the PV module in question. The current-voltage curve, or I-V curve, provides a level of insight into a PV module’s health unparalleled by most monitoring efforts. However, the tools which measure the I-V curve exist in an undesirable form—PV must be disconnected from its load and connected to the tool …

Statistical Analysis Of Disturbances In Power Transmission Systems, Liu Liu

Masters Theses

Disturbance analysis is essential to the study of the power transmission systems. Traditionally, disturbances are described as megawatt (MW) events, but the access to data is inefficient due to the slow installation and authorization process of the monitoring device. In this paper, we propose a novel approach to disturbance analysis conducted at the distribution level by exploiting the frequency recordings from Frequency Disturbance Recorders (FDRs) of the Frequency Monitoring Network (FNET/GridEye), based on the relationship between frequency change and the power loss of disturbances - linearly associated by the Frequency Response. We first analyze the real disturbance records of North …

Digital-To-Analog Converter Interface For Computer Assisted Biologically Inspired Systems, Nicholas Conley Poore

Masters Theses

In today's integrated circuit technology, system interfaces play an important role of enabling fast, reliable data communications. A key feature of this work is the exploration and development of ultra-low power data converters. Data converters are present in some form in almost all mixed-signal systems; in particular, digital-to-analog converters present the opportunity for digitally controlled analog signal sources. Such signal sources are used in a variety of applications such as neuromorphic systems and analog signal processing. Multi-dimensional systems, such as biologically inspired neuromorphic systems, require vectors of analog signals. To use a microprocessor to control these analog systems, we must …

Microgrid Modeling And Grid Interconnection Studies, Hira Amna Saleem

Masters Theses

The demand for renewable energies and their integration to the grid has become more pressing than ever before due to the various reasons including increasing population energy demand, depleting fossil fuels, increasing atmospheric population, etc. Thus the vision of a sustainable future requires easy and reliable integration of renewable distributed generators to the grid. This master’s thesis studies the dynamics of distributed generators when they are connected with the main grid. Simulink MATLAB is used for the design and simulations of this system. Three distributed generators are used in this system: Photo-voltaic converter, Fuel cell and diesel generator. The control …

Low Pressure Chemical Vapor Deposition Of Semiconducting Boron Carbide Thin Films On Silicon, Thomas Gregory Wulz

Masters Theses

Boron carbide thin films were grown on the (100) plane of n-type silicon in a low pressure chemical vapor deposition (CVD) system from the thermal decomposition of boron trichloride and methane reactant gases with hydrogen as a carrier gas. Boron trichloride to methane molar ratio was 5, while the boron trichloride to hydrogen molar ratio was 3.5. Thin film deposition was carried out at 900 degrees Celsius at 25 Torr. The thin films were analyzed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Energy Dispersive X-Ray Spectroscopy (EDS), Laser Induced Breakdown Spectroscopy (LIBS), and current-voltage characteristics. The crystallography of …

Improved Forensic Medical Device Security Through Eating Detection, Nathan Lee Henry

Masters Theses

Patients are increasingly reliant on implantable medical device systems today. For patients with diabetes, an implantable insulin pump system or artificial pancreas can greatly improve quality of life. As with any device, these devices can and do suffer from software and hardware issues, often reported as a safety event. For a forensic investigator, a safety event is indistinguishable from a potential security event. In this thesis, we show a new sensor system that can be transparently integrated into existing and future electronic diabetes therapy systems while providing additional forensic data to help distinguish between safety and security events. We demonstrate …

Optimal Control Of Energy Efficient Buildings, Cale David Nelson

Masters Theses

The building sector consumes a large part of the energy used in the United States and is responsible for nearly 40% of greenhouse gas emissions. Therefore, it is economically and environmentally important to reduce the building energy consumption to realize massive energy savings. Commercial buildings are complex, multi-physics, and highly stochastic dynamic systems. Recent work has focused on integrating modern modeling, simulation, and control techniques to solving this challenging problem. The overall focus of this thesis is directed toward designing an energy efficient building by controlling room temperature. One approach is based on a distributed parameter model represented by a …

A Novel Authentication Method Using Multi-Factor Eye Gaze, Lucas A. Herrera

Masters Theses

A method for novel, rapid and robust one-step multi-factor authentication of a user is presented, employing multi-factor eye gaze. The mobile environment presents challenges that render the conventional password model obsolete. The primary goal is to offer an authentication method that competitively replaces the password, while offering improved security and usability. This method and apparatus combine the smooth operation of biometric authentication with the protection of knowledge based authentication to robustly authenticate a user and secure information on a mobile device in a manner that is easily used and requires no external hardware. This work demonstrates a solution comprised of …

Hardware-In-Loop Evaluation Of Microgrid Protection Schemes, Kevin Michael Dowling

Masters Theses

Distributed energy resources are becoming more common in distribution systems. Higher energy prices and increased interest in alternative energy sources are two of the driving forces behind this trend. Local utilities, however, anticipate very serious distribution system protection problems resulting from high penetration of these resources.

The microgrid concept has been proposed as a possible solution to integrating distributed energy resources without adversely impacting the distribution system. Protection schemes have been proposed to work within this microgrid structure, but very little testing with real hardware is available. Without a practical solution for microgrid protection, backed by extensive studies, microgrids are …

Development Of A Testing Platform For Secondary-Use Electric Vehicle Batteries As Community Energy Storage Systems, Thomas Benjamin Ollis

Masters Theses

Energy storage is quickly transforming from a commodity to a necessity for electric utilities. The peak demand on the electric grid continues to grow, requiring more sources of generation and upgrades to infrastructure. The variability of renewable generation sources, such as wind and solar, has created more uncertainty on the generation side of the electric grid. Energy storage represents one possible solution to mitigate the demand and uncertainty; however, energy storage systems have historically been too expensive to recoup their capital cost. More recently, research into electric vehicle batteries has brought their cost down and improved performance. As they continue …