Engineering Commons^™

Design Of An Electrical Power System For The Openorbiter Cubesat, Sofiane Chaieb, Michael Wegerson, Jeremy Straub, Ronald Marsh, David Whalen

Jeremy Straub

The OpenOrbiter Small Spacecraft Development Initiative aims to create an Open Prototype for Educational Nanosats (OPEN) framework (see [1]) for a complete 1-U CubeSat (10 cm x 10 cm x 10 cm, 1.33 kg spacecraft) with a total parts cost of less than $5,000 [2]. In order to supply all spacecraft subsystems with power, an electrical power system (EPS) has been implemented. The EPS generates power using multiple solar panels, stores it in batteries and regulates it to provide continuous levels of power to all of the subsystems of the spacecraft. The EPS has a crucial role in the spacecraft …

A Software Defined Radio Communications System For A Small Spacecraft, Michael Hlas, Jeremy Straub, Ronald Marsh

Jeremy Straub

Software defined radios (SDRs) are poised to significantly enhance the future of small spacecraft communications. They allow signal processing to be performed on a computer by software rather than requiring dedicated hardware. The OpenOrbiter SDR (discussed in [1] and refined in [2]) takes data from the flight computer and converts it into an analog signal that is transmitted via the spacecraft antenna. Because the signal processing is done in software, the radio can be easily reconfigured. This process is done in reverse for incoming transmissions, which are received by the SDR and decoded by software. Figures 1 and 2 provide …

Creating A Low-Cost Radio For An Open Cubesat, Michael Wegerson, Jeremy Straub, Ronald Marsh

Jeremy Straub

A reliable communication system is key to the success of a CubeSat mission, allowing for data to be trans-mitted to the ground station and commands to be up-loaded to the satellite. To satisfy this need, the OpenOrbiter satellite (a 1-U CubeSat [1], being devel-oped with a target parts budget of under $5,000 [2]) is leveraging previously space-tested [3], low-cost trans-ceiver design which is based on the SI 4463 IC unit. This board design will be included in the publically available Open Framework for Educational Nanosatel-lites (OPEN) allowing others to modify, enhance and/or make use of the design in the future.

Electrical Power System For An Open Hardware Cubesat, Sofiane Chaieb, Michael Wegerson, Jeremy Straub, Ronald Marsh, David Whalen

Jeremy Straub

The OpenOrbiter program is developing a complete set of CubeSat hardware and software to facilitate the development of a 1-U CubeSat (10 cm x 10 cm x 10 cm, 1.33 kg spacecraft) with a parts cost of less than $5,000. This poster covers the electrical power system (EPS) for that spacecraft. The EPS is an assemblage of components that supplies all spacecraft subsystems with power, while performing health assessment of the battery and electrical buses. The EPS has a crucial role in the spacecraft and thus has to be developed and tested with extreme care.

The EPS generates power using …

The Creation Of A Communication Systems For A Small Satellite At The University Of North Dakota, Michael Hlas, Jeremy Straub, Ronald Marsh

Jeremy Straub

Software defined radios (SDRs) are poised to significantly enhance the future of small spacecraft communications. They allow signal processing to be performed on a computer by software rather than requiring dedicated hardware. The SDR takes data from the flight computer and converts it into an analog signal that is transmitted via the spacecraft antenna. Because the signal processing is done in software, the radio can be easily reconfigured.

Data is prepared for transmission by TCP stack software onboard the OpenOrbiter Spacecraft and placed in a queue while the spacecraft is listening for a signal from a ground station. When a …

Design Of An Onboard Distributed Multiprocessing System For A Cubesat, Michael Wegerson, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter program aims to develop a low-cost framework to facilitate the development of CubeSat-class spacecraft (small spacecraft with nominal dimensions of 10 cm x 10 cm x 10 cm) for a parts cost of less than $5,000. To validate the framework that has been developed, a prototype unit will also be fabricated and tested in low-Earth orbit. In addition to validating the development of Open Prototype for Educational Nanosats (OPEN) framework, the spacecraft will perform on-orbit science. One aspect of the science mission will be to demonstrate and characterize the efficacy of two types of image processing. To this …

Advancement Of The Software Defined Radio (Sdr) For The Open Orbiter Project, Michael Wegerson, Jeremy Straub, Sima Noghanian, Ronald Marsh

Jeremy Straub

Software Defined Radios (SDRs) are an exciting development in radio technology. The SDR uses software to perform many of the tasks that only hardware could previously complete on a traditional analog radio. Such tasks include encoding/decoding or applying filters to reduce noise on the signal. This powerful fusion of software and hardware have allowed SDR to be smaller in size and have a greater functionality than traditional radio setups; a perfect solution for our Open Orbiter satellite. Currently, the implementation we use consists of a simple $20 USB TV decoder for receiving, a Raspberry Pi micro-computer for transmission, and the …

Openorbiter Ground Station Software, Alexander Lewis, Jacob Huhn, Jeremy Straub, Travis Desell, Scott Kerlin

Jeremy Straub

The OpenOrbiter Small Spacecraft Development Initiative[1] at the University of North Dakota is working to design and build a low cost[2] and open-hardware / opensource software CubeSat[3]. The Ground Station is the user interface for operators of the satellite. The ground station software must manage spacecraft communications, track its orbital location , manage task assignment, provide security and retrieve the data from the spacecraft. This will be presented via a graphical user interface that allows a user to easily perform these tasks.

Evolution Of The Software Defined Radio (Sdr) For The Open Orbiter Project, Michael Wegerson, Jeremy Straub, Sima Noghanian

Jeremy Straub

Software Defined Radios (SDRs) are an exciting development in radio technology. The SDR uses software to perform many of the tasks that only hardware could previously complete on a traditional analog radio. Such tasks include encoding/decoding or applying filters to reduce noise on the signal. This powerful fusion of software and hardware have allowed SDR to be smaller in size and have a greater functionality than traditional radio setups; a perfect solution for our Open Orbiter satellite. Currently, the implementation we use consists of a simple $20 USB TV decoder for receiving, a Raspberry Pi micro-computer for transmission, and the …