Engineering Commons^™

Diy Cell Incubator, Hayden James Jeanor

Electrical Engineering

The purpose of creating a cell Incubator is for the development of cell and tissue production in laboratory settings. Large scale research projects and the medical community grow cells for various reasons, including experiments and creating tissue for patients. However, they cannot simply depend on growing cells in a petri dish that sit on a rack at room temperature. To grow heathy cells in the fastest way possible, they use cell incubators. Cell incubators create an atmosphere within the incubation bay that is designed to promote cell growth. The three main components that need to be constantly regulated, using a …

Smartphone Detector, Ryan Coldiron

Electrical Engineering

There is a wide variety of times when it is unacceptable to be using a smartphone, and this device could help to minimize when people are using their devices. People have become more and more reliant on their various pieces of technology such as their smartphones, and are often using them when they should be paying attention in class, attending an important meeting, watching a movie, or should just be present to their other surroundings. A device that could detect the use of smartphones at these inopportune times would be something that would benefit a wide variety of people.

The …

Battery Energy Storage System, Carlos Gonzalez, Philip Tafoya, Mariely Caraballo, William Hoang

Electrical Engineering

The Battery Energy Storage System (BESS) project consists of bringing an existing photovoltaic battery energy storage system into service within Cal Poly’s Energy Conversion Lab. Information regarding the BESS is limited to the existing manuals as the original equipment manufacturer has ceased supporting the product in the United States. Results from previous projects on the BESS speculated that a DC input may be required to enable the system’s to be fully operational. The goal of the project is to provide a DC input into BESS and test the system’s functionality. Initially, a Photovoltaic Thevenin Equivalent was expected to be utilized …

Identifying And Minimizing Underspecification In Breast Cancer Subtyping, Jonathan Cheuk-Kiu Tang

Master's Theses

In the realm of biomedical technology, both accuracy and consistency are crucial to the development and deployment of these tools. While accuracy is easy to measure, consistency metrics are not so simple to measure, especially in the scope of biomedicine where prediction consistency can be difficult to achieve. Typically, biomedical datasets contain a significantly larger amount of features compared to the amount of samples, which goes against ordinary data mining practices. As a result, predictive models may fail to find valid pathways for prediction during training on such datasets. This concept is known as underspecification.

Underspecification has been more accepted …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Biomedical Engineering: Graduate Reports and Projects

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Master's Theses

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Iris Detection Authenticator, Nathan D. Tang, Bryan K. Chau

Electrical Engineering

The development of iris biometric identification recognition is presented. Iris recognition differs from other methods because data acquisition is non-physical and is more accessible. It has been proven that the iris does not change as an individual ages and is well protected from external damages due to the eyelid and cornea, acting as a shield to the iris. In addition, the iris is almost impossible to forge due to its complex patterns and the current limitations in technology. Using Canny Edge Detection, Hough Transform, rubber-sheet normalization, Histogram of Gradient feature extraction, and the MultiMedia University iris database as our subjects, …

An Inexpensive Maximum Power Point Tracking System For An Insulated Solar Electric Cooker Using An Off-The-Shelf Buck Converter, Andrew A. Perez

Physics

A specialized control circuit using an off-the-shelf buck converter is built for an Insulated Solar Electric Cooker (ISEC). Cost and efficient power delivery are the focus. An ISEC is synonymous to a direct load heat resistor, allowing a specific maximum power point tracking (MPPT) algorithm and fewer components. Only a microcontroller, voltage sensor, and digital-to-analog converter are used with the buck converter to maximize the power delivered by a 100W solar panel for the 3.3Ω load.

Developing Positive Thermal Coefficient (Ptc) Heaters For Solar Electric Cooking, Katarina Ivana Brekalo, Andrew Shepherd

Physics

Positive Thermal Coefficients, PTCs, are materials that abruptly change in resistance in response to changes in temperature. The purpose of this experiment is to explore the viability of using the switching type ceramic PTC thermistor as a replacement for current resistive heaters. These types of PTCs have a nonlinear change in resistance with increases in temperature. This device will be used as a temperature-controlling heating element intended to power an Insulated Solar Electric Cooker (ISEC). The ISEC is designed to cook meals throughout the day for impacted communities as an alternative cooking method that doesn’t require biofuel as an energy …

Potassium And Sodium Sensing Isfet Device And Array, Liam Stephen Hayes

Electrical Engineering

The use of Ion-Sensitive Field Effect Transistors (ISFETs) as a means of testing a person’s potassium concentration in real-time has broad applications in the consumer space. An avid runner could use such a device to keep track of their hydration and salt levels. A hospital could use it for patients who require around-the-clock remote monitoring, and a variation of ISFETs are currently being used as continuous glucose monitors for diabetes patients. While ISFETs are not a new development in the field of microelectronics, their use as wearable devices has recently become relevant. The goal of this project is primarily to …

Design And Analysis Of A Discrete, Pcb-Level Low-Power, Microwave Cross-Coupled Differential Lc Voltage-Controlled Oscillator, Pavin Singh Virdee

Master's Theses

Radio Frequency (RF) and Microwave devices are typically implemented in Integrated Circuit (IC) form to minimize parasitics, increase precision and tolerances, and minimize size. Although IC fabrication for students and independent engineers is cost-prohibitive, an abundance of low-cost, easily accessible printed circuit board (PCB) and electronic component manufacturers allows affordable PCB fabrication.

While nearly all microwave voltage-controlled oscillator (VCO) designs are IC-based, this study presents a discrete PCB-level cross-coupled, differential LC VCO to demonstrate this more affordable and accessible approach. This thesis presents a 65 mW, discrete component VCO PCB with industry-comparable RF performance. A phase noise of -103.7 dBc/Hz …

Solar Powered Electric Bicycle, Joseph Kent Debruynkops

Liberal Arts and Engineering Studies

A solar-powered electric bike that is useful for college students.

Barrier Knockdown Test Control System For The Cal Poly Kinesiology Department, Regina M. Chapuis

Computer Engineering

The goal of this project is to design and implement a new control system for the LEDs and buttons on an existing Barrier Knockdown setup in the Cal Poly Kinesiology department. The Barrier Knockdown test is a testing apparatus in which subjects knock down a series of mechanical barriers in one of three patterns. The computer system times their reaction and movement time, and the test as a whole provides students with data to study the phenomenon of Contextual Interference. This system was previously controlled by an old computer setup that ultimately crashed. This project recreates the logic and user …

Dual-Axis Precision Imager, Gary Huarng

Computer Engineering

The Dual-Axis Precision Imager (DAPI) is a drawing robot that processes images and draws them on a whiteboard. The system has two modes: a Sobel filter mode that finds the edges of the input image with a Sobel filter, and a tri-tone grayscale mode that approximates the shading of the input image with the colors white, gray, and black. The DAPI consists of an Arduino-controlled XY gantry system with a pen mounted on the gantry head, and a Processing IDE program that processes the original image, converts the processed image into gantry instructions, and sends them to the Arduino for …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Multifamily Complex Smart Locks For Property Management And Tenant Security, April Mills, Allen Chen, Dana Kumamoto, Michael Cook

Mechanical Engineering

Maintaining and managing hundreds of locks and physical keys for an apartment complex can be time consuming and costly, especially when the apartments turn over to new tenants. Our goal was to develop a smart door lock that is compatible with Obodo’s management app for apartment complexes to make accessing apartments secure and simpler for tenants and easier to manage for owners.

We designed and manufactured one smart door lock that is powered with four AA batteries and utilizes a dynamic NFC device and Bluetooth technology. The board can enter a sleep mode which reduces power consumption. The dynamic NFC …

Signal Adc Converter Simulation On Cadence Virtuoso For Audio Applications, Maxwell Kazuki Fukada

Electrical Engineering

Audio signals are representations of sounds with a mixture of multiple analog signals between the frequency of 20Hz to 20,000Hz. To record snippets of audio data onto a mobile phone or computer, the signal needs to be converted to a digital format. For this purpose, many devices utilize a converter, specifically a sigma-delta modulator with a digital filter. By using a converter, electronics can receive binary data about the audio signal accurately and quickly without losing important signal information. This project aims to simulate a fully functional audio converter with a sigma-delta modulator and decimation filter. The system will receive …

Dynamic Response Of Elastic Two-Story Steel Moment Frame Scaled Structure Equipped With Viscous Dampers, Garrett L. Barker, Alexander L. Poirier

Architectural Engineering

The authors of this report are Architectural Engineering undergraduate students at California Polytechnic State University, San Luis Obispo. Damping is a complex, experimentally derived value that is affected by many structural properties and has a profound effect on the dynamic response of structures. Deducing the inherent damping of a steel moment frame and affecting the damping ratio with viscous dampers are two topics explored in this paper. Dampers are commonly implemented in resilient structures that perform better in a design basis earthquake, reducing the seismic cost and downtime. Undergraduate coursework does not delve into the factors that affect damping and …

Smart Usb-C Wall Plug For The Dc House Project, Ridge Lahti, Dino Maslic

Electrical Engineering

DC operated devices and appliances powered by AC systems suffer inefficiencies resulting from the losses of converting AC energy into DC energy. At Cal Poly, the DC House Project aims to minimize the need for AC electricity in homes and encourage the use of renewable energy systems. The DC House uses a 48V DC bus that must be stepped down for use with increasing number of DC loads in a typical home. In this project, a Smart USB-C Wall Plug is designed to work with USB Power Delivery to provide a variable voltage output for use with these DC loads …

Maximum Trapping Focal Length In Photophoretic Trap For 3d Imaging Systems, Jason M. Childers

Electrical Engineering

This product is a photophoretic trapping system which allows varying focal lengths to test which focal lengths are possible for trapping toner particles. This system establishes that there exists a maximum trapping distance limitation and is the first time the effect of focal length is studied in a photophoretic trapping system. Increasing photophoretic trapping focal length is necessary for improving this technology as a 3D display. The 3D imaging technology is realized by dragging a microscopic (micrometer-scale) particles with a laser beam to trace an image. This technology can display fully colored and high-resolution 3D images visible from almost any …

Controlling Temperature Of Dc-Dc Converter Using Switching Frequency Adjustment, Sajjad Ahsan, Arsalan Mughal, Mark Rapiz

Electrical Engineering

As DC-DC converter operates under different load conditions, the amount of loss within the converter varies accordingly. Consequently the temperature of the DC-DC converter will also change based on the load demand. For PWM based DC-DC converters, one factor that contributes to the loss; thus, the increase in temperature is the switching frequency at which the converter operates. The higher the switching frequency used, the bigger the switching loss and in turn the hotter the converter. In this project, the temperature of a DC-DC converter is controlled by changing the switching frequency used by the converter. The hardware investigation used …

Hybrid Ac/Dc Light Bulb, Celina Mendez, Kristian Vincent Cruz, Nouman Baryal

Electrical Engineering

A hybrid AC/DC house aims to maximize the use of AC electricity from the utility grid and DC electricity from renewable energy sources such as roof-top solar panels. The hybrid system will therefore improve the reliability of the electrical by enabling power to be delivered to the loads even when one of the sources is not operational. One of the critical loads that every house needs is lighting. The hybrid AC/DC system should therefore be reliably facilitating the power delivery to the lighting. In this project, a localized hybrid AC/DC for LED light bulbs is designed and constructed. The hybrid …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Hybrid Ac/Dc House: The Road To A Sustainable Future, Nicholas Mcadams, Luis Rodriguez

Electrical Engineering

The Hybrid AC/DC house is a sustainable alternative to preexisting residential power systems. The implementation of a DC bus in current homes will allow inefficient DC-AC and AC-DC conversions to be circumvented. This provides a direct path for current to flow to DC loads from DC sources such as solar panels to minimize power losses. In doing so, this will give users the ability to power their homes strictly from renewable sources and substantially decrease reliance on the utility. For this purpose, the hybrid AC/DC house is also designed in such a way to be entirely grid-independent to provide power …

Bicep Muscle Rep Counter With Semg, Matthew Max Garcia

Electrical Engineering

The Bicep Muscle Rep Counter with SEMG is a device that was made to develop three repetition thresholds or difficulty levels from a fully-flexed bicep brachii muscle and signal to the user when consequent bicep muscle contractions pass said thresholds or levels. This device can be used when performing a bicep-focused movement or when generally flexing the bicep muscle. Essentially, this device serves to make sure each repetition of a muscle contraction passes a percentage value calculated from the electrical activity outputted from a max contraction.

The device is not designed for and does not produce data for muscle growth, …

Behind The Ear (Bte) Hearing Aid, Marco Gaitan, Jaclyn Kimoto, Lawrence Lai, Billy Pho

Electrical Engineering

The product is a Behind The Ear (BTE) hearing aid with the capability to improve the quality of life for people with mild to severe hearing loss and caters to a different consumer through bold exterior design to increase awareness of deafness and normalize hearing loss. In comparison to In The Ear (ITE) and In The Canal (ITC) hearing aids, the BTE hearing aid provides the best amplification while retaining an affordable price. Sound amplification depends on two or more directional microphones embedded in the product to give users the ability to discern the direction of incoming sound easily in …

Current-Source Dc-Dc Converter, Rocio Sanchez-Mendoza, Carlos Aguilar, Adrian Aranjo

Electrical Engineering

In this project, a hardware implementation of a current-source DC-DC converter for powering sensors used in an underwater communications system is presented. The proposed converter is designed to step down an input current of 0.9 A to 0.625 A, while maintaining an output voltage of 24 V and output power of 15 W. An overview of the system design is explained as well as the component selection process. The design of the converter was simulated and evaluated using LTspice before being physically constructed on a printed circuit board. Performance evaluation of the proposed converter was carried out in multiple lab …

Microgrid Energy Storage Branch, Evan Luu, Jeffrey Shieh

Electrical Engineering

The microgrid is the future for the electrical utility system. Because of this, future power engineers need to be well-versed in this topic when they go into industry. Cal Poly has created a microgrid laboratory for this very purpose. However, it is missing its battery based energy storage branch. Due to safety concerns, a traditional chemical battery is not suitable for student use. In order to maintain Cal Poly’s learn-by-doing approach, an alternative solution must be implemented. A regenerative power supply meets the criteria for student use. It is capable of simulating the sinking and sourcing capabilities of a battery …

Hvac Hardware Modeling Using Programmable Automatic Controller, Panthil Ketan Patel, Lumanti Tuladhar

Electrical Engineering

The primary purpose of this project is to use the donated programmable logic controllers (PLC) from Schneider Electric to develop experiments for a future lab class at Cal Poly. Our goal as the first group working on this project is to develop an experiment where the PLC can control the HVAC system based on temperature and humidity sensors and user inputs to maintain a desired consistent temperature. The PLC will be controlled using Unity Pro XLS/Control Expert software for simulations. The overall purpose of the experiments will be to demonstrate the potential of the PLC to minimize manual intervention while …