Engineering Commons^™

You Kind Of Have To Prove It: Gender Microaggressions Within The Lived Experiences Of Women In Engineering, Crystal Rose Diaz-Espinoza

Doctoral Dissertations

This intrinsic case study explored the lived experiences of women within three engineering majors at a mid-sized institution in the Mid-Atlantic using gender microaggressions (Nadal, 2010; Sue, 2007) as a theoretical lens. Data included individual interviews with 28 participants as well as document review from Web pages and observations from physical spaces within the campus engineering building. Data analysis resulted in seven themes in congruence with Sue’s (2007) taxonomy of gender microaggressions and further established the three levels of gender microaggressions distinguished by Nadal (2010). Findings also revealed that barriers within engineering were less visible or outwardly sexist, and that …

Teacher Beliefs About Motivating And Teaching Students To Carry Out Engineering Design Challenges: Some Initial Data, James P. Van Haneghan, Susan A. Pruet, Rhonda Neal-Waltman, Jessica M. Harlan

Journal of Pre-College Engineering Education Research (J-PEER)

The present study examines middle school teachers’ beliefs about seven learning outcomes related to a project that involves developing and examining the effects of a set of engineering design modules constructed for use by middle school math and science teachers. Overall, the teachers involved in the intervention appear to believe they have the instructional skills, professional development, and resources to carry out the modules. Teachers from all of the schools (both intervention and comparison schools) for the most part valued the outcomes as important. Results of the study indicate that, although teachers believe they value and can obtain most of …

The Decision, Implementation And Assessment Of A Credit-Bearing Activity Class By Faculty In Residence: A Case Study, Janet Callahan, Geoff Harrison, Michael Humphrey, Cala Sielaff, Melissa Wintrow

Materials Science and Engineering Faculty Publications and Presentations

This case study reports on a programmatic decision to require a credit-bearing course that was made by Faculty in Residence (FIR), including its implementation and results over a two-year period from 2010-2012. The focus is on FIR and on the impact of their decision upon the students enrolled in their Living Learning Communities (LLCs). The credit-bearing course was a Kinesiology Activities class taken by all seven LLCs at Boise State University. Anonymous feedback from students was obtained via end of semester surveys; results were used to improve the course. Survey feedback was analyzed to assess the value students perceived to …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Dr Daniel Edwards

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Dr Jacob Pearce

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Assessing The Validity And Reliability Of Dichotomous Test Results Using Item Response Theory On A Group Of First Year Engineering Students, Edmund Nevin, Avril Behan, Gavin Duffy, Stephanie Farrell, Rachel Harding, Robert Howard, Aaron Mac Raighne, Brian Bowe

Conference papers

Traditional measurement instruments employed to assess the performance of student’s studying on STEM (Science, Technology, Engineering and Mathematics) related programmes typically involve classification based on final scores. The validity and reliability of these instruments and test forms are important considerations when assessing whether a student understands content and if not, where and in what way they are struggling. The aim of this study is to examine, validate and analyse the test results of first-year engineering student’s at an Institute of Higher Learning in Ireland who took the Purdue Spatial Visualisation Test of Rotation (PSVT:R). Results obtained were analysed using the …

Priming Middle School Females’ Engagement In Engineering And Technology, Mary Bonk Isaac

STEMPS Theses & Dissertations

The purpose of this study was to validate data collected between 2009-2013 via an instrument used to assess middle school girls’ identification with and interest in engineering and technology following the Society of Women Engineers’ WOW events. Recognizing the importance of measuring the impact of such mentored E & T activities on young females’ attitudes about and interest in STEM, and more specifically, engineering and technology, SWE outreach experts developed a participant survey based on event objectives and domain knowledge, but never rigorously examined whether it produced statistically valid data that could be used to draw inferences about girls’ propensity …

Evolution Of A First-Year Engineering Course, Noah Salzman, Janet Callahan, Gary Leroy Hunt, Carol Sevier, Amy J. Moll

Electrical and Computer Engineering Faculty Publications and Presentations

The first-year engineering course at Boise State University has evolved significantly over the past decade as a result of continuous improvement with a particular focus on student retention. The course was originally created in 1999-2001 as an “Introduction to Engineering” course in order to recruit students to one of the fields of engineering, by introducing those fields of engineering as topics across the semester. Over the first ten years, the course continued that introductory-to-field focus while also introducing a significant design element solving openended engineering problems. As a result of a five-year grant aimed toward improving first-year retention, the first-year …

The New Aviation Meteorology Specialization In The Graduate Aeronautics Program At Embry-Riddle, John M. Lanicci, Erin A. Roberts

John M Lanicci

The next 12 months will be an exciting time of growth in graduate aviation studies at Embry-Riddle Aeronautical University's Daytona Beach, FL campus. Beginning in Fall Semester 2009, a new Area of Concentration (AOC) in Aviation Meteorology will be added to the Master of Science in Aeronautics (MSA) program, and the new Doctoral program in Aviation will be starting in January 2010. The Aviation Meteorology AOC adds a crucial specialty to the existing MSA options in Air Traffic Management, Aviation/Aerospace Education Technology, Aviation/Aerospace Management, Aviation/Aerospace Operations, and Aviation/Aerospace Safety Systems. The Aviation Meteorology AOC is designed to be a cross-disciplinary …

The Weather And Air Traffic Management Integration Course In The Graduate Aeronautics Program At Embry-Riddle, John Lanicci

John M Lanicci

One year ago, Embry-Riddle Aeronautical University added a new Area of Concentration (AOC) in Aviation Meteorology to the Master of Science in Aeronautics (MSA) program at the Daytona Beach, Florida campus. As part of the preparation for the start of this program, an experimental graduate seminar in Weather and Air Traffic Integration was taught over the summer, which attracted graduate students with backgrounds in commercial and private aviation, applied meteorology, and engineering physics. The purpose of this course was to introduce the students to the concept of weather and air traffic integration as it currently exists and is being planned …

Weather Technology In The Cockpit (Wtic): Concept Of Operations, User Needs, Education, And Training, John Lanicci, L. Kirk, L. Martin, J. Vacek, E. A. Roberts, M. Edwards

John M Lanicci

The FAA, through sponsorship of the Center for General Aviation Research (CGAR), has funded a multi-disciplinary research program on Weather Technology In the Cockpit (WTIC). The CGAR is a consortium of four universities, three of which (Embry-Riddle Aeronautical University, University of North Dakota, University of Alaska-Anchorage) are working together on this program. Each university partner has the lead on a portion of the project: the University of Alaska-Anchorage is the lead on developing the WTIC Concept of Operations (CONOPS); the University of North Dakota is the lead on developing a robust set of WTIC user needs; Embry-Riddle Aeronautical University is …

Assessing The Effectiveness Of An Education And Training Module For General Aviation Pilots On The Use Of Nexrad-Based Products In The Cockpit, John Lanicci, Erin Roberts, E. Blickensderfer

John M Lanicci

Numerous studies over the years have documented the need to improve meteorological education and training for General Aviation (GA) pilots. With the advent of readily available aviation weather hazard products for real-time pilot use on the flight deck, there is now a lack of education and training on the proper interpretation and usage of these products. Data-linked NEXRAD is a good example of a currently available real-time product that is very popular in the GA community, but lacks a coherent understanding of its proper usage in pre-flight planning and in-flight operation.

Proper usage of NEXRAD in the cockpit should require …

Global Technology Experiences For Upper-Division Engineering Students: An Assessment, Patricia Backer, Wenchiang Chung

Faculty Publications

In order for students to thrive in the highly competitive global economy, it is critical for them to develop international perspectives and appreciation. As a result, in 2004, the San Jose State University’s Charles W. Davidson College of Engineering established a one-million-dollar Global Technology Initiative (GTI) program. The mission of the GTI program is to expand students’ horizons about the opportunities and challenges of a global economy, to expose them to global, environmental, and energy problems in which technology plays a central role, to motivate their learning of global issues and different cultures, and to introduce them to a more …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Higher education research

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Assessing Impact Of Exposure To Cyberphysical Systems On Student Interest In Information Technology Careers, Mayari I. Serrano Anazco

Purdue Polytechnic Masters Theses

The main purpose of this project is to determine if the use of Information Technology (IT) tools, specifically cyberphysical devices, in outreach sessions will promote interest of young individuals in pursuing IT careers. The Diversity office of Purdue’s College of Technology offers a number of outreach sessions to a variety of target populations throughout the year. Each department in the college has an opportunity to present a session related to a field of study offered by the department. The research was carried out thru the Spring 2015 semester during the DOiT and Vision outreach programs offered through the college’s Diversity …

Difficulty As A Concept Inventory Design Consideration: An Exploratory Study Of The Concept Assessment Tool For Statics (Cats), Dana L. Denick

Open Access Dissertations

The ability for engineering students to apply mathematic, scientific and engineering knowledge to real-life problems depends greatly on developing deep conceptual knowledge that structures and relates the meaning of underlying principles. Concept inventories have emerged as a class of tests typically developed for use in higher education science and engineering courses. Concept Inventories (CIs) are multiple-choice tests that are designed to assess students' conceptual understanding within a specific content domain. For example, the CI explored within this study, the Concept Assessment Tool for Statics (CATS) is intended to measure students' understanding of the concepts underlying the domain of engineering statics. …

A Systematic Review Of The Critical Factors For Success Of Mobile Learning In Higher Education (University Students' Perspective), Muasaad Alrasheedi, Luiz Fernando Capretz, Arif Raza

Electrical and Computer Engineering Publications

The phenomenon of the use of a mobile learning (m-Learning) platform in educational institutions is slowly gaining momentum. However, the enthusiasm with which mobile phones have been welcomed into every aspect of our lives is not yet apparent in the educational sector. To understand the reason, it is important to understand user expectations of the system. This article documents a systematic review of existing studies to find the success factors for effective m-Learning. Our systematic review collates results from 30 studies conducted in 17 countries, where 13 critical success factors were found to strongly impact m-Learning implementation. Using these results …

An Assessment Of The Performances Of Several Univariate Tests Of Normality, James Olusegun Adefisoye

FIU Electronic Theses and Dissertations

The importance of checking the normality assumption in most statistical procedures especially parametric tests cannot be over emphasized as the validity of the inferences drawn from such procedures usually depend on the validity of this assumption. Numerous methods have been proposed by different authors over the years, some popular and frequently used, others, not so much. This study addresses the performance of eighteen of the available tests for different sample sizes, significance levels, and for a number of symmetric and asymmetric distributions by conducting a Monte-Carlo simulation. The results showed that considerable power is not achieved for symmetric distributions when …

Improving Engineering Work And Study, Daniel Edwards, Jacob Pearce

Dr Jacob Pearce

Daniel Edwards and Jacob Pearce discuss a study that explores the perceptions of the engineering workforce, including engineering education and barriers to participation and career advancement.

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Dr Jacob Pearce

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

An Empirical Study Of Critical Success Factors Of Mobile Learning Platform From The Perspective Of Instructors, Muasaad Alrasheedi, Luiz Fernando Capretz

Electrical and Computer Engineering Publications

Mobile learning is newest learning platform and based on the rapid rate of proliferation of mobile technology throughout the world is expected to grow at a rapid rate. However, the adoption of m-Learning is proceeding at a cautious rate. This mismatch in the rate of growth of the technology itself and the use of the technology in learning is a subject of extensive interest to researchers. However, research in the area has been mostly focused on understanding the success factors of the platform from learners’ perspective. In this research, we have conducted an extensive analysis of the extent to which …

2015 Oklahoma Research Day Full Program, Northeastern State University

Oklahoma Research Day Abstracts

This document contains all abstracts from the 2015 Oklahoma Research Day held at Northeastern State University.

Investigating The Influence Of Professional Development On Teacher Perceptions Of Engineering Self Efficacy, Stephen D. Marquis Phd

All Student Scholarship

This mixed-methods study examines the influence of a professional-development intervention to support educators in the integration of engineering education at the elementary level. Particular consideration focused on the evolution of teachers' perceptions of engineering self-efficacy following engagement in professional development intended to support the introduction of engineering in selected grade-five classrooms.

Wikis For Group Work: Encouraging Transparency, Benchmarking And Feedback, Amir Abdekhodaee, Dini Kourosh, Farnaz Modarres, Anne-Marie Chase, Bella Ross

Dr Anne-Marie Chase