Engineering Commons^™

Autonomous Basketball Court Creation Robot, Bryce Haldeman, Tyler Gray, Dalon Vura

Williams Honors College, Honors Research Projects

The Autonomous Basketball Court Outlining System presents a comprehensive solution for precision court marking. Powered by a 24V lithium-ion battery and driven by a single ST microcontroller, the system autonomously marks the outline of a half basketball court using predefined algorithms. User-friendly features include easy loading of marking material, actuated by gravity or a small servo motor depending on material of choice, ensuring intuitive operation. Safety is prioritized, with the servo motor eliminating high-pressure concerns, and the system maintains a controlled speed accounting for user well-being. Two step and direction servo motors enable accurate linear displacement, facilitating straight lines, and …

Path Planning With Deep Neural Networks, Paul Simmerling, Brendan Sayers, Paulo Alcantara Silva

Honors Scholar Theses

This report will cover the work and plans of the ECE 2107 Senior design team. The goal of the project is to design and build a fully autonomous self-driving car. This car will have a complete sensor suite including LIDAR, an IMU, a camera, and encoders. It will be based on a multi-level system where the highest level uses a neural network for advanced signal processing and analysis. The current state of the project is discussed as well as the final results. Project management and other constraints will be briefly investigated. This team is building a self driving car testbed …

Integration Of Robotic And Electro-Pneumatic Systems Using Advanced Control And Communication Schemes, Chinmay Kondekar

Dissertations, Master's Theses and Master's Reports

Modern industrial automation systems are designed by interconnecting various subsystems which work together to perform a process. The thesis project aims to integrate fragmented subsystems into a flexible and reconfigurable system through advanced communication protocols and perform a process to demonstrate the effectiveness of interconnected systems.

The system consists of three six-axis robots, one electro-pneumatic robot, and two conveyors connected using EthernetIP communication and hardwired connections. The interconnected system works together to perform machining of a workpiece using advanced control methods of CAD to robot path generation, central control through a PLC, and process control through HMI.

Standardized programming blocks …

Development Of A Fully Instrumented, Resonant Tensegrity Strut, Kentaro Barhydt

Honors Theses

A tensegrity is a structure composed of a series of rigid members connected in static equilibrium by tensile elements. A vibrating tensegrity robot is an underactuated system in which a set of its struts are vibrated at certain frequency combinations to achieve various locomotive gaits. Evolutionary robotics research lead by Professor John Rieffel focuses on exploiting the complex dynamics of tensegrity structures to control locomotion in vibrating tensegrity robots by finding desired gaits using genetic algorithms. A current hypothesis of interest is that the optimal locomotive gaits of a vibrating tensegrity exist at its resonant frequencies.

In order to observe …

Ros-Enabled Framework For A Miniature Hexapod As A Mobile Robot Research Platform, Joseph Michael Kloeppel

Electrical and Computer Engineering ETDs

The purpose of this thesis is to investigate and develop a framework for connected six-legged robots which can be used as a Robotic Operating System (ROS) based research platform. The research presented aims to purvey the necessary engineering and scientific steps needed to evolve a consumer-grade connected toy into a fully functioning and highly capable robotic system. Such a platform can be used to simulate and implement novel biologically inspired swarm research. Crawling robots have the advantage of being able to scale terrains which wheeled mobile robots may not and possess many interesting characteristics. The miniROaCH, miniature ROS-enabled and Crawling …

Underwater Robot, Joseph E. Beck, Matthew Crislip, Cody Bobek, Peyton Lucas

Williams Honors College, Honors Research Projects

Remotely Operated Vehicles (ROVs) are remote controlled drones operated by a non-local user. The ROV we plan to build is connected by a tethering wire to a floating buoy that contains an antenna which will send signals between the base station and the ROV. The ROV is equipped with a video camera, ballast system, propulsion system, lights, and a depth sensor. The ROV will transmit a live video feed to the user, while receiving input signals to control its movement from the base station.

Cooperative 3-D Map Generation Using Multiple Uavs, Andrew Erik Lawson

University Scholar Projects

This report aims to demonstrate the feasibility of building a global 3-D map from multiple UAV robots in a GPS-denied, indoor environment. Presented are the design of each robot and the reasoning behind choosing its hardware and software components, the process in which a single robot obtains a individual 3-D map entirely onboard, and lastly how the mapping concept is extended to multiple robotic agents to form a global 3-D map using a centralized server. In the latter section, this report focuses on two algorithms, Online Mapping and Map Fusion, developed to facilitate the cooperative approach. A limited selection …

Automated Foosball Table, Jim R. Stefani, Alex J. Herpy, Brett Gordon Jaeger, Kevin S. Haydon, Derek Alan Hamel

Mechanical Engineering

This project is the second iteration of an automated foosball table for Yaskawa America as a trade show display. The table is meant to provide an interactive experience which highlights the speed and precision of the Yaskawa hardware. The first iteration of the project was mainly focused on creating the physical hardware for the system and to begin the basic programming for the system. This phase of the project was focused on finalizing the physical hardware of the system, implementing the vision system and to continue the basic programing of the system AI. A third team will be assigned to …

A Rapidly Prototyped 2-Axis Positioning Stage For Microassembly Using Large Displacement Compliant Mechanisms, Aaron Hoover, Srinath Avadhanula, Richard Groff, Ronald Fearing

Aaron M. Hoover

Compliant mechanisms provide an attractive alternative to conventional rigid mechanisms in the design of ultra low-cost precision positioning systems. The desirable performance characteristics of these mechanisms including freedom from backlash, long life, light weight, and ease of fabrication/assembly make them an ideal solution to the problem of inexpensive precision positioning for microassembly. This paper presents a design for a 2 axis precision positioning system which makes use of large displacement compliant mechanisms, a room temperature and pressure molding fabrication process, commodity hardware, and a piecewise linear interpolation compensation scheme to achieve positioning performance suitable for automated assembly of sub-centimeter robotic …