Engineering Commons^™

Impact Of Alkaline Doping And Reducing Conditions On Lafeo3, Geoffrey L. Beausoleil Ii

Geoffrey L Beausoleil II

Efficient and reliable materials for gas separation, syngas production, and hybrid nuclear power plants must be capable of reliably operating at a high-temperature range of 700-1000°C and under exposure to highly oxidizing and reducing conditions. Candidate materials for these applications include alkaline metal doped lanthanum ferrite.

In the first study, the impact of A site substitution by different alkaline metals on lanthanum ferrite (LMF, M=Ca, Sr, and Ba) was investigated. The study focused on thermal expansion near the Néel transition temperature and a magneto-elastic contribution to thermal expansion was identified for each sample. Iron oxidation, Fe3+ to Fe4+, was identified …

Reflectance Anisotropy Of Gd5si2ge2 And Tb5si2.2ge1.8, S. J. Lee, Joong Mok Park, J. E. Snyder, David C. Jiles, Deborah L. Schlagel, Thomas A. Lograsso, A. O. Pecharsky, David W. Lynch

Professor David Lynch

Reflectance difference (RD) spectra for the a–b plane of the single crystals of Gd5Si2Ge2and b–c planes of Gd5Si2Ge2 and Tb5Si2.2Ge1.8 were obtained in the photon energy range of 1.5–5.5 eV. Several peaks were observed for these crystals in the measured spectrum range. Similar features were observed in the RD spectra for the b–c planes ofGd5Si2Ge2 and Tb5Si2.2Ge1.8, while different features were observed for the a–b plane and b–c plane of Gd5Si2Ge2. The RD spectra for the crystals arise not only from the surface anisotropy but also from the bulk anisotropy due to the monoclinic structure of the bulk crystal.

Modeling The Atomic And Electronic Structure Of Metal-Metal, Metal-Semiconductor And Semiconductor-Oxide Interfaces, Ganesh Krishna Hegde

Open Access Dissertations

The continuous downward scaling of electronic devices has renewed attention on the importance of the role of material interfaces in the functioning of key components in electronic technology in recent times. It has also brought into focus the utility of

atomistic modeling in providing insights from a materials design perspective. In this thesis, a combination of Semi Empirical Tight-Binding (TB), first-principles Density

Functional Theory and Reactive Molecular Dynamics (MD) modeling is used to study aspects of the electronic and atomic structure of three such 'canonical' material interfaces - Metal-Metal, Metal-Semiconductor and Semiconductor oxide interfaces.

An important contribution of this thesis …

Novel Nanostructured Rare-Earth-Free Magnetic Materials With High Energy Products, Bhaskar Das

B. Das

Novel nanostructured Zr2Co11-based magnetic materials are fabricated in a single step process using cluster-deposition method. The composition, atomic ordering, and spin structure are precisely controlled to achieve a substantial magnetic remanence and coercivity, as well as the highest energy product for non-rare-earth and Pt-free permanent-magnet alloys.

Structural Properties Of Ferroelectric Lead (Zirconium0.5,Titanium0.5)Oxygen3 Nanotube Array And Electronic Structure Of Lao Delta-Doped Strontium Titanate, Rajendra Prasad Adhikari

Graduate Theses and Dissertations

In this Dissertation we begin with two introductions on: 1) ferroelectricity and related phenomena, and 2) novel properties of Oxide electronics and the generation of two dimensional electron gas. We then give theoretical background of density functional theory (including LDA+U) and pseudopotentials. The first part of research work is about structural, polarization, and dielectric properties of ferroelectric Lead Zirconate Titanate (PZT) solid solution in the form of a nanotube array, embedded in a matrix medium of different ferroelectric strengths. We use the effective Hamiltonian derived from first-principles and finite-temperature Monte Carlo methods to determine the various properties. We revealed different …

Multiscale Study Of Batio3 Nanostructures And Nanocomposites, Lydie Louis Louis

Graduate Theses and Dissertations

Advancements in integrated nanoelectronics will continue to require the use of unique materials or systems of materials with diverse functionalities in increasingly confined spaces.

Hence, research on finite-dimensional systems strive to unearth and expand the knowledge of fundamental physical properties in certain key materials which exhibit numerous concurrent and exploitable functions.

Correspondingly, ferroelectric nanostructures, which particularly display a plethora of complex phenomena, prevalent in countless fields of research, are noteworthy candidates. Presently, however, the assimilation of zero-(0D) and one-dimensional (1D) ferroelectric into micro- or nano-electronics has been lagging, in part due to a lack of applied and fundamental studies but …

Influence Of Microstructure On The Propagation Of Fatigue Cracks In Inconel 617, Benjiman Michael Albiston

Boise State University Theses and Dissertations

Inconel 617 is a candidate material for use in the intermediate heat exchanger of the Next Generation Nuclear Plant. Because of the high temperatures and the fluctuations in stress and temperature, the fatigue behavior of the material is important to understand. The goal of this study was to determine the influences of the microstructure during fatigue crack propagation. For this investigation, Inconel 617 compact tension samples, fatigue tested by Julian Benz at the Idaho National Laboratory, were obtained. The testing conditions included two environments at 650 °C (lab air and impure-He) and varied testing parameters including: loading waveform (triangular, trapezoidal), …

Hfco7-Based Rare-Earth-Free Permanent-Magnet Alloys, Bhaskar Das

B. Das

This study presents the structural and magnetic properties of melt-spun HfCo7,HfCo7-xFex (0.25 ≤ × ≤ 1) and HfCo7Six(0.2 ≤ × ≤1.2) alloys. Appreciable permanent-magnet properties with a magnetocrystalline anisotropy of about 9.6-16.5 Mergs/cm3, a magnetic polarization Js ≈ 7.2-10.6 kG, and coercivities Hc = 0.5-3.0 kOe were obtained by varying the composition of these alloys. Structural analysis reveals that the positions of x-ray diffraction peaks of HfCo7 show good agreement with those corresponding to an orthorhombic structure having lattice parameters of about α = 4.719 Å, b = 4.278 Å, and c = 8.070 Å. Based on these results, a …

Novel Bimetallic Plasmonic Nanomaterials, Ritesh Sachan

Doctoral Dissertations

Plasmonic nanomaterials have attracted a lot of attention recently due to their application in various fields such as chemical and biological sensing, catalysis, energy harvesting and optical devices. However, there is a need to address several outstanding issues with these materials, including cost-effective synthesis, tunability in plasmonic characteristics, and long term stability. In this thesis, we have focused on bimetallic nanoparticles (NPs) of Ag and Co due to their immiscibility as well as their individual properties. First, a pulsed laser induced dewetting route was used to synthesize Ag-Co bimetallic plasmonic NPs. An synthesis parameter space was derived to show the …

Modeling Complex Properties Of Ferroelectric Nanocomposites, Raymond T. Walter

Raymond Walter

No abstract provided.

Magnetic And Crystal Structures Of Sr2Iro4: A Neutron Diffraction Study, Feng Ye, Songxue Chi, Bryan C. Chakoumakos, Jaime A. Fernandez-Baca, Tongfei Qi, Gang Cao

Center for Advanced Materials Faculty Publications

We report a single-crystal neutron diffraction study of the layered Sr₂IrO₄. This work unambiguously determines the magnetic structure of the system and reveals that the spin orientation rigidly tracks the staggered rotation of the IrO₆ octahedra in Sr₂IrO₄. The long-range antiferromagnetic order has a canted spin configuration with an ordered moment of 0.208(3) μ_B/Ir site within the basal plane; a detailed examination of the spin canting yields 0.202(3) and 0.049(2) μ_B/site for the a axis and the b axis, respectively. It is intriguing that forbidden nuclear reflections …

Carbon Nitride And Conjugated Polymer Composite Materials, Josh Byers

Electronic Thesis and Dissertation Repository

The semiconductor and photovoltaic properties of carbon nitride (CNx) thin films prepared using a reactive magnetron sputtering technique were investigated both individually and as composites with the organic conjugated polymers polybithiophene (PBT) and poly(3-hextlthiophene) (P3HT). At low nitrogen content, the film structure was dominated by graphitic sp² percolation networks, whereas at higher nitrogen contents CNx films started to demonstrate semiconductor properties, as evidenced by the occurrence of photoconductivity and the development of a space charge region. When CNx was deposited onto a PBT substrate, it was found to function as an acceptor material improving the photocurrent generation both in …

Bulk Heterojunction Photodiode: To Detect The Whole Visible Spectrum, Shahino Mah Abdullah

Shahino Mah Abdullah

In this paper, we report an organic bulk heterojunction photo-sensor that has been fabricated by using a composite of a polymer material poly(3-hexylthiophene-2,5-diyl) (P3HT) and a dye material vanadyl-phthalocyanine (VOPcPhO). The UV–Vis spectrum shows that this composite exhibits a broad absorption over the whole visible range. The photoluminescence (PL) spectra of P3HT and VOPcPhO blend have been studied to optimize the ratio of P3HT and VOPcPhO. The photo-sensitivity has been investigated under different applied voltages in reverse direction. The photoconductivity sensitivity value has been calculated as 5.65 × 102 Sm/W. The photo-responsivity of the sensor has been investigated under 100 …

Organic Semiconductors: Applications In Solar Photovoltaic And Sensor Devices, Shahino Mah Abdullah

Shahino Mah Abdullah

Organic semiconductor-based solar photovoltaic cells and sensors are scalable, printable, solution processable, bendable and light-weight. Furthermore, organic semiconductors require low energy fabrication process, hence can be fabricated at low cost as light-weight solar cells and sensors, coupled with the ease of processing, as well as compatibility, with flexible substrates. Organic semiconductors have been identified as a fascinating class of novel semiconductors that have the electrical and optical properties of metals and semiconductors. The continuous demand to improve the properties of organic semiconductors raises the quest for a deep understanding of fundamental issues and relevant electronic processes. Organic semiconductor thin film …

Infrared Dielectric Anisotropy And Phonon Modes Of Rutile Tio2, Rafal Korlacki, Stefan Schöche, Tino Hofmann, Tom E. Tiwald, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

Spectroscopic ellipsometry in the mid-infrared and far-infrared spectral range and generalized ellipsometry in the mid-infrared spectral range are used to investigate the anisotropic dielectric response of rutile TiO₂. The ordinary and extraordinary dielectric function tensor components and all infrared active phonon mode parameters of single crystalline rutile TiO₂ are determined with high accuracy for wavelengths from 3 μm to 83 μm. The data were acquired from samples of (001), (100), and (111) surfaces cut from bulk single crystals. A factorized model dielectric function is employed in order to determine the frequencies and damping parameters of the transverse …

Microfabricated Nanotopological Surfaces For Study Of Adhesion-Dependent Cell Mechanosensitivity, Weiqiang Chen, Yubing Sun, Jianping Fu

Weiqiang Chen

Cells exhibit high sensitivity and diverse responses to the intrinsic nanotopography of the extracellular matrix through their nanoscale cellular sensing machinery. A simple microfabrication method for precise control and spatial patterning of the local nanoroughness on glass surfaces by using photolithography and reactive ion etching is reported. It is demonstrated that local nanoroughness as a biophysical cue could regulate a diverse array of NIH/3T3 fi broblast behaviors, including cell morphology, adhesion, proliferation, migration, and cytoskeleton contractility. The capability to control and further predict cellular responses to nanoroughness might suggest novel methods for developing biomaterials mimicking nanotopographic structures in vivo for …

Ultrasound For Improved Crystallisation In Food Processing, N. Misra, Navneet Deora, Brijesh Tiwari, Patrick Cullen

Articles

Within the food industry, controlling crystallisation is a key factor governing food structure, texture and consumer appeal, with some foods requiring the promotion of crystallisation in a controlled manner (e.g. chocolate) and others a check (e.g. in honey). Sonocrystallisation is the application of ultrasound energy to control the nucleation of a crystallisation process. The use of power ultrasound provides a non-invasive approach to producing crystals with desired properties. Sonocrystallisation facilitates process control, primarily by modulating crystal size distribution and morphology. This paper details the governing mechanisms of sonocrystallisation. Proven and potential applications of the process in foods, including chocolates, honey, …

Scaling Of The Coercive Field In Ferroelectrics At The Nanoscale, R. V. Gaynutdinov, M. Minnekaev, S. Mitko, A. L. Tolstikhina, A. Zenkevich, Stephen Ducharme, Vladimir M. Fridkin

Stephen Ducharme Publications

The scaling of the coercive field in ferroelectric films at the nanoscale is investigated experimentally. The scaling in the films of copolymer vinylidene fluoride and BaTiO3 with thickness equal by the order of value to the critical domain nucleus size 1–10 nm reveals deviation from the well-known Kay–Dunn law. At this thickness region coercive field does not depend on thickness and coincides with Landau–Ginzburg–Devonshire value.

Non-Equilibrium Melting And Sublimation Of Graphene Simulated With Two Interatomic Potentials, Brad Steele

USF Tampa Graduate Theses and Dissertations

The mechanisms of the sublimation of graphene at zero pressure and the condensation of carbon vapor is investigated by molecular dynamics (MD) simulations. The interatomic interactions are described by the Reactive Empirical Bond Order potential (REBO). It is found that graphene sublimates at a temperature of 5,200 K. At the onset of sublimation, defects that contain several pentagons and heptagons are formed, that are shown to evolve from double vacancies and stone wales defects. These defects consisting of pentagons and heptagons act as nucleation sites for the gaseous phase. The influence of the interatomic interactions on the sublimation process are …

Magnetization Dynamics And Related Phenomena In Nanostructures, Sayan Chandra

USF Tampa Graduate Theses and Dissertations

Collective magnetic behavior in nanostructures is a phenomenon commonly observed in various magnetic systems. It arises due to competing inter/intra–particle interactions and size distribution and can manifest in phenomena like magnetic freezing, magnetic aging, and exchange bias (EB) effect. In order to probe these rather complex phenomena, conventional DC and AC magnetic measurements have been performed along with radio–frequency transverse susceptibility (TS) measurements. We also demonstrate the magnetic entropy change as a parameter sensitive to subtle changes in the magnetization dynamics of nanostructures. The focus of this dissertation is to study the collective magnetic behavior in core-shell nanostructures of Fe/γ–Fe …

Investigation Of Nbnx Thin Films And Nanoparticles Grown By Pulsed Laser Deposition And Thermal Diffusion, Ashraf Hassan Farha

Electrical & Computer Engineering Theses & Dissertations

Niobium nitride films (NbNx) were grown on Nb and Si (100) substrates using pulsed laser deposition (PLD), laser heating, and thermal diffusion methods. Niobium nitride films were deposited on Nb substrates using PLD with a Q-switched Nd: YAG laser (λ = 1064 nm, 40 ns pulse width, and 10 Hz repetition rate) at different laser fluences, different nitrogen background pressures and deposition temperatures. The effect of changing PLD parameters for films done by PLD was studied. The seen observations establish guidelines for adjusting the laser parameters to achieve the desired morphology and phase of the grown NbNx films.

When the …

Tuning Of Magnetization In Vertical Graphenes By Plasma-Enabled Chemical Conversion Of Organic Precursors With Different Oxygen Content, Zengji Yue

Zengji Yue

Different magnetization in vertical graphenes fabricated by plasma-enabled chemical conversion of organic precursors with various oxygen atom contents and bonding energies was achieved. The graphenes grown from fat-like precursors exhibit magnetization up to 8 emu g−1, whereas the use of sugar-containing precursors results in much lower numbers. A relatively high Curie temperature exceeding 600 K was also demonstrated.