Engineering Commons^™

A Kinect-Based System For Automatic Recording Of Some Pigeon Behaviors, Damian Lyons, James Macdonall, Kelly Cunningham

Faculty Publications

Contact switches and touch screens are the state of the art for recording pigeons’ pecking behavior. Recording other behavior, however, requires a different sensor for each behavior, and some behaviors cannot easily be recorded. We present a flexible and inexpensive image-based approach to detecting and counting pigeon behaviors that is based on the Kinect sensor from Microsoft. Although the system is as easy to set up and use as the standard approaches, it is more flexible because it can record behaviors in addition to key pecking. In this article, we show how both the fast, fine motion of key pecking …

New Challenges For The Archiving Of Digital Writing, Heiko Zimmermann

CLCWeb: Comparative Literature and Culture

In his article "New Challenges for the Archiving of Digital Writing" Heiko Zimmermann discusses the challenges of the preservation of digital texts. In addition to the problems already at the focus of attention of digital archivists, there are elements in digital literature which need to be taken into consideration when trying to archive them. Zimmermann analyses two works of digital literature, the collaborative writing project A Million Penguins (2006-2007) and Renée Tuner's She… (2008) and shows how the ontology of these texts is bound to elements of performance, to direct social interaction of writers and readers to the uniquely subjective …

Responses To Catastrophic Agi Risk: A Survey, Kaj Sotala, Roman V. Yampolskiy

Faculty Scholarship

Many researchers have argued that humanity will create artificial general intelligence (AGI) within the next twenty to one hundred years. It has been suggested that AGI may inflict serious damage to human well-being on a global scale ('catastrophic risk'). After summarizing the arguments for why AGI may pose such a risk, we review the fields proposed responses to AGI risk. We consider societal proposals, proposals for external constraints on AGI behaviors and proposals for creating AGIs that are safe due to their internal design.

An Empirical Study Of Semantic Similarity In Wordnet And Word2vec, Abram Handler

University of New Orleans Theses and Dissertations

This thesis performs an empirical analysis of Word2Vec by comparing its output to WordNet, a well-known, human-curated lexical database. It finds that Word2Vec tends to uncover more of certain types of semantic relations than others -- with Word2Vec returning more hypernyms, synonomyns and hyponyms than hyponyms or holonyms. It also shows the probability that neighbors separated by a given cosine distance in Word2Vec are semantically related in WordNet. This result both adds to our understanding of the still-unknown Word2Vec and helps to benchmark new semantic tools built from word vectors.

High-Performance Meta-Genomic Gene Identification, Ibrahim Savran

Theses and Dissertations

Computational Genomics, or Computational Genetics, refers to the use of computational and statistical analysis for understanding the structure and the function of genetic material in organisms. The primary focus of research in computational genomics in the past three decades has been the understanding of genomes and their functional elements by analyzing biological sequence data. The high demand for low-cost sequencing has driven the development of highthroughput sequencing technologies, next-generation sequencing (NGS), that parallelize the sequencing process, producing thousands or millions of sequences concurrently. Moore’s Law is the observation that the number of transistors on integrated circuits doubles approximately every two …

Practical Concurrency Support For Web Service Transactions, Emad Alsuwat

Theses and Dissertations

Traditional database concurrency control methods use locking, timestampordering, and optimistic-ordering to achieve DB consistency. However, these approaches are not suitable for long-running Web Service Compositions (WSCs) due to associated performance degradation. Our hypothesis asserts that, using transactional semantic and ordering information, the execution time of a WSC can be reduced, thus allowing the use of traditional database concurrency control methods while avoiding unacceptable performance degradation. Our solution is based on the following approaches: § We model a WSC as WS-BPEL specification, i.e., a partial order of WS transactions. § We allow some of the WS transactions in the WSC to …

Automatic Loop Tuning And Memory Management For Stencil Computations, Fan Zhang

Theses and Dissertations

The Texas Instruments C66x Digital Signal Processor (DSP) is an embedded processor technology that is targeted at real time signal processing. It is also developed with a high potential to become the new generation of coprocessor technology for high performance embedded computing. Of particular interest is its performance for stencil computations, such as those found in signal processing and computer vision tasks. A stencil is a loop in which the output value is updated at each position of an array by taking a weighted function of its neighbors. Efficiently mapping stencil-based kernels to the C66x device presents two challenges. The …

Automated Scratchpad Mapping And Allocation For Embedded Processors, Yang Gao

Theses and Dissertations

Embedded system-on-chip processors such as the Texas Instruments C66 DSP and the IBM Cell provide the programmer with a software controlled on-chip memory to supplement a traditional but simple two-level cache. By decomposing data sets and their corresponding workload into small subsets that fit within this on-chip memory, the processor can potentially achieve equivalent or better performance, power efficiency, and area efficiency than with its sophisticated cache. However, program controlled on chip memory requires a shift in the responsibility for management and allocation from the hardware to the programmer. Specifically, this requires the explicit mapping of program arrays to specific …

Benefits Of Video Games In Multidisciplinary Scientific Research, Jeremiah Jeffrey Shepherd

Theses and Dissertations

In recent years, computer-based games have been shown to be effective both as a tool for conducting research in a variety of domains and for research on games itself. In this work, we show that implementing games that have a basis in theory and that are combined with the most recent gaming practices result in effective research tools. We demonstrate this via game implementations for three domains. The first implementation is based on new theories in speech pedagogy, and demonstrates the effectiveness of our approach. The second implementation shows that using a game that simulates therapeutic speech practices can aid …

Coordinated Control And Estimation Of Multiagent Systems With Engineering Applications, Housheng Su, Michael Z.Q. Chen, Qing Hui, Wei Zhang, Fanglai Zhu

Department of Electrical and Computer Engineering: Faculty Publications

Recently, coordinated control and estimation problems have attracted a great deal of attention in different fields especially in biology, physics, computer science, and control engineering. Coordinated control and estimation problems have prominent characteristics of distributed control, local interaction, and self-organization. Research on multiagent coordinated control and estimation problems not only helps better understand the mechanisms of natural collective phenomena but also benefits the applications of cyberphysical systems.

This special issue focuses on theoretical and technological achievements in cooperative multiagent Systems. It contains twenty-six papers, the contents of which are summarized below.

Effects Of Training Datasets On Both The Extreme Learning Machine And Support Vector Machine For Target Audience Identification On Twitter, Siaw Ling Lo, David Cornforth, Raymond Chiong

Research Collection School Of Computing and Information Systems

The ability to identify or predict a target audience from the increasingly crowded social space will provide a company some competitive advantage over other companies. In this paper, we analyze various training datasets, which include Twitter contents of an account owner and its list of followers, using features generated in different ways for two machine learning approaches - the Extreme Learning Machine (ELM) and Support Vector Machine (SVM). Various configurations of the ELM and SVM have been evaluated. The results indicate that training datasets using features generated from the owner tweets achieve the best performance, relative to other feature sets. …

Online Learning On Incremental Distance Metric For Person Re-Identification, Yuke Sun, Hong Liu, Qianru Sun

Research Collection School Of Computing and Information Systems

Person re-identification is to match persons appearing across non-overlapping cameras. The matching is challenging due to visual ambiguities and disparities of human bodies. Most previous distance metrics are learned by off-line and supervised approaches. However, they are not practical in real-world applications in which online data comes in without any label. In this paper, a novel online learning approach on incremental distance metric, OL-IDM, is proposed. The approach firstly modifies Self-Organizing Incremental Neural Network (SOINN) using Mahalanobis distance metric to cluster incoming data into neural nodes. Such metric maximizes the likelihood of a true image pair matches with a smaller …

Human Action Classification Based On Sequential Bag-Of-Words Model, Hong Liu, Qiaoduo Zhang, Qianru Sun

Research Collection School Of Computing and Information Systems

Recently, approaches utilizing spatial-temporal features have achieved great success in human action classification. However, they typically rely on bag-of-words (BoWs) model, and ignore the spatial and temporal structure information of visual words, bringing ambiguities among similar actions. In this paper, we present a novel approach called sequential BoWs for efficient human action classification. It captures temporal sequential structure by segmenting the entire action into sub-actions. Each sub-action has a tiny movement within a narrow range of action. Then the sequential BoWs are created, in which each sub-action is assigned with a certain weight and salience to highlight the distinguishing sections. …

Media Usage Survey: Overall Comparison Of Faculty And Students, Gerd Gidion, Michael Grosch, Luiz Fernando Capretz, Ken Meadows Dr.

Electrical and Computer Engineering Publications

Recent developments in the use of technologies in education have provided unique opportunities for teaching and learning. This paper describes the results of a survey conducted at Western University (Canada) in 2013, regarding the use of media by students and instructors. The results of this study support the assumption that the media usage of students and instructors include a mixture of traditional and new media. The main traditional media continue to be important, and some new media have emerged as seemingly on equal footing or even more important than the traditional forms of media. Some new media that have recently …

A Study Of Mobile Learning For Higher Education Students In Guangzhou, Chun Hung, Hugo Wong

Practical Social and Industrial Research Symposium

No abstract provided.

Assisted Technology For Daily Living, Raymond K.Y. Tong

Practical Social and Industrial Research Symposium

Prof Tong will introduce two major assisted technologies he recently developed to assist elderly people’s daily living and promote healthy ageing : i) the telecare system for monitoring the safety of single elderly at home; and ii) Kinect system for elderly to carry out home-based exercise.

Design Of A Haptic Interface For Medical Applications Using Magneto-Rheological Fluid Based Actuators, Nima Najmaei

Electronic Thesis and Dissertation Repository

This thesis reports on the design, construction, and evaluation of a prototype two degrees-of-freedom (DOF) haptic interface, which takes advantage of Magneto-Rheological Fluid (MRF) based clutches for actuation. Haptic information provides important cues in teleoperated systems and enables the user to feel the interaction with a remote or virtual environment during teleoperation. The two main objectives in designing a haptic interface are stability and transparency. Indeed, deficiencies in these factors in haptics-enabled telerobotic systems has the introduction of haptics in medical environments where safety and reliability are prime considerations. An actuator with poor dynamics, high inertia, large size, and heavy …

Ultra-Wideband Notched Characteristic Fed By Coplanar Waveguide, Rastanto Hadinegoro, Yuli Kurnia Ningsih, Indra Surjati

Makara Journal of Technology

In this paper, a novel Ultra-Wide Band (UWB) notch patch antenna with co-planar waveguide (CPW) fed is presented. This antenna only used one layer and the patch antenna is constructed on the first layer and back to back with CPW fed and bottom part is ground plane. The width notch is used to achieve the UWB characteristic. The results shown that the impedance bandwidth is 1130 MHz (1.662–2.792 GHz) or about 50.7% for VSWR <2.

Continuous Production Of Nanotubes And Carbon Clusters By Use Of The Revolver-Injection-Type Arc Jet Producer, Tetsu Mieno, Naoki Matsumoto, Takahashi Tomie, H. Inoue

Makara Journal of Technology

Efficient and continuous production of fullerenes, single-walled carbon nanotubes (SWNTs), and carbon nano-particles has been developed by the JxB arc jet method, where the Lorentz force of magnetic field jets out gaseous carbon particles to the JxB direction. In order to realize continuous mass production of these carbon clusters, the revolverinjection- type arc jet producer (RIT-AJP) has been developed. Production of fullerenes, endohedral metallo-fullerenes, SWNTs, metal-encapsulated carbon nano particles has been examined.

Development Of The Soekarno–Hatta International Airport Rail Link Project Using The Value Engineering Method: Creating Value For Money, Mohammed Ali Berawi, Bambang Susantono, Suyono Dikun, Tommy Ilyas, Herawati Zetha Rahman, Abdur Rohim Boy Berawi, Teuku Yuri Zagloel, Perdana Miraj, Jade Sjafrecia Petroceany

Makara Journal of Technology

Soekarno–Hatta Airport is the main gateway for international flights to Greater Jakarta. Its accessibility depends on the inter-city and Sedyatmo toll roads, which causes congestion in peak hours, leading to uncertainty about travel times. The Soekarno–Hatta International Airport Rail Link (SHIARL) is proposed as an alternative mass transportation project, which is expected to provide accessibility and mobility for people and goods to and from the airport. Previously, the project was unattractive to private investors as it was technically and financially unfeasible. Therefore, this research aims to improve the feasibility of the Soekarno-Hatta International Airport Rail Link (SHIARL) by using a …

Endoscopic Application Of A Compact Compound-Eye Camera, Keiichiro Kagawa, Shoji Kawahito

Makara Journal of Technology

A multi-functional compound-eye endoscope enabling multi-spectral imaging and variable field-of-view is presented, which is based on a compact compound-eye camera called TOMBO (thin observation module by bound optics). Narrow-band filters attached to some lenses provide snap-shot multi-band images. Fixed and movable mirrors are introduced to control the field of view, which realizes several observation modes such as three-dimensional shape measurement, wide field-of-view, and close-up observation.

Lateral Load Resistance Of Laminated Veneer Lumber Sengonwooden Joints With Wooden Dowels, Niken Palaeowati, Ali Awaludin, Suprapto Siswosukarto

Makara Journal of Technology

Analytical models for wooden-doweled joints need to be developed. The objective of this research is to determine whether the strength of wooden-doweled joints can be well predicted by equations developed for steel-doweled joints. In this experiment, various connection parameters, such as dowel diameter, species of the wooden dowel, and angle of joints, are studied. The joint specimens are loaded in a quasi-static state with four replications each. A5% offset diameter method is used to determine the lateral load resistance of the tested joints, while the predictions are evaluated by equations given in Indonesian National Standard (SNI) 7973-2013 and the European …

Design Of Gan-Based Low-Loss Y-Branch Power Splitter, Retno Wigajatri Purnamaningsih, Irma Saraswati, Nji Raden Poespawati, Elhadj Dogheche

Makara Journal of Technology

We present a Y-branch power splitter design with a multimode section using GaN on Sapphire at telecommunication wavelength. The GaN sample optical properties were also investigated, resulting in a refractive index for the GaN layers nTE=2.289±0.001 and nTM=2.324±0.00. Optimization of the structure parameters for this structure was conducted accurately using BPM methods. The results demonstrated the possibility of realizing a GaN-based Y-branch power splitter for various applications.

Analysis Of Vibration Generated By The Rubbing Of Flat Surfaces, Zahrul Fuadi

Makara Journal of Technology

Among the phenomena that occur as a result of contact between two surfaces is friction sound, in which surface roughness is of great importance. In this study, the parameter of contact stiffness is used to explain the frequency characteristic of vibration generated by the rubbing of flat surfaces under a small load. A 3-disk configuration rubbing method was used, which provides a unique characteristic of the system's frequency response function containing specific information about the rubbing vibrations. It is shown that the peak frequency of the rubbing vibration can be explained by using a two-degrees-of-freedom model incorporating the parameter of …

The Mechanical And Tribology Properties Of Sputtered Titanium Aluminum Nitride Coating On The Tungsten Carbide Insert Tool In The Dry Turning Of Tool Steel, Esmar Budi, Mohd. Razali Bin Muhamad, Md. Nizam Bin Abdul Rahman

Makara Journal of Technology

The effect of the sputtering parameters on the mechanical tribology properties of Titanium Aluminum Nitride coating on the tungsten cabide insert tool in the dry turning of tool steel has been investigated. The coating was deposited using a Direct Current magnetron sputtering system with various substrate biases (-79 to -221 V) and nitrogen flow rates (30 to 72 sccm). The dry turning test was carried out on a Computer Numeric Code machine using an optimum cutting parameter setting. The results show that the lowest flank wear (~0.4 mm) was achieved using a Titanium Aluminum Nitride-coated tool that was deposited at …

Modified Design Of Pin-On-Ring Tribometer For Hip Joint Prostheses Measurement; Case Study On Salat Activity, Muhammad Khafidh, Jamari Jamari, Sulardjaka Sulardjaka, Mohamad Tauviqirrahman, Emile Van Der Heide

Makara Journal of Technology

Total hip replacement (THR) is one of the most successful orthopedic surgical procedures for replacing a broken hip joint. In THR, wear may occur at the articulating surface of the acetabular cup and the femoral head. In Indonesia, the country with the largest Muslim population in the world, most of the inhabitants do salat (praying) every day. THR users are banned from doing salat for fear it will damage the hip joint prostheses. The previous wear calculation methods on the hip joint prostheses use the gravimetric, coordinate measuring machine (CMM), profiler, and geometric method. The disadvantages of the previous methods …

Media Usage In Post-Secondary Education And Implications For Teaching And Learning, Gerd Gidion, Luiz Fernando Capretz, Ken Mead Dr., Michael Grosch Dr.

Electrical and Computer Engineering Publications

The Web 2.0 has permeated academic life. The use of online information services in post-secondary education has led to dramatic changes in faculty teaching methods as well as in the learning and study behavior of students. At the same time, traditional information media, such as textbooks and printed handouts, still form the basic pillars of teaching and learning. This paper reports the results of a survey about media usage in teaching and learning conducted with Western University students and instructors, highlighting trends in the usage of new and traditional media in higher education by instructors and students. In addition, the …

Dynamically Reconfigurable Miniature Golf Course, James Lind

Honors Theses

The purpose of this report is to inform the reader of the Senior Design Project lead by 3 students in the Electrical and Computer Engineering department at Western Michigan University. The project is in needed for use within the ECE department as a tool for showcasing to prospective students the attributes of electrical and computer engineering.

At the heart of the project lies an Arduino microcontroller acting as the commanding brain of the system. Its task is to manipulate various types of obstacles throughout the playing field with a goal of delivering a dynamic experience to the player(s). Additionally, a …

Scalable Hardware Efficient Deep Spatio-Temporal Inference Networks, Steven Robert Young

Doctoral Dissertations

Deep machine learning (DML) is a promising field of research that has enjoyed much success in recent years. Two of the predominant deep learning architectures studied in the literature are Convolutional Neural Networks (CNNs) and Deep Belief Networks (DBNs). Both have been successfully applied to many standard benchmarks with a primary focus on machine vision and speech processing domains.

Many real-world applications involve time-varying signals and, consequently, necessitate models that efficiently represent both temporal and spatial attributes. However, neither DBNs nor CNNs are designed to naturally capture temporal dependencies in observed data, often resulting in the inadequate transformation of spatio-temporal …

Badge Web Application, Ryan Green

Computer Engineering

This project includes the imagining, design, build, and test of a web application that creates and tracks a user’s progress on completing tasks that an administrator has created for the user. The goal of this project is to have a functioning webpage that is robust and scalable to support many users and many tasks. The application will be developed for use on all modern web browsers, and will have a persistent server to access from any platform. This project was designed to be an exercise in building a modern web application, and as such is written using many different languages, …