Engineering Commons^™

Investigation Of Northeast Extreme Tee (Next) D Beam Bridges As An Alternative To Precast Hollow Core Bridges: An Exploration Of Appropriate Slab Design Forces, Daniel Deery

All Theses

Adjacent precast, prestressed concrete beam bridges have become a popular solution throughout the country because deck forming can be eliminated and construction is rapid. In South Carolina, adjacent beam bridges primarily consist of flat slab or hollow core sections, and they are currently only used on secondary, low-volume, short-span bridges. Durability and load sharing issues stemming from cracking, however, have caused concern with the longevity of these bridge types. Thus, the South Carolina Department of Transportation (SCDOT) has sought an alternative to the flat slab for short span bridges that can be used on high volume roads without an overlay. …

Rapid Construction Of Pacific Street Bridge, Kromel E. Hanna, George Morcous, Maher K. Tadros

Nebraska Department of Transportation: Research Reports

No abstract provided.

Dynamic Characteristics Of An Frp Deck Bridge, Jing Song

Masters Theses

Fiber reinforced polymer (FRP) deck has some significant advantages compared to concrete deck in use of bridges, such as light self-weight, high stiffness and strength, good durability and easy to install. FRP deck has already been used in some bridge rehabilitation and short span bridges. But for widely used in bridges, FRP deck bridges still need further research. Currently many research efforts focus on the filed tests of FRP deck bridges. Compared to field tests, Finite element analysis also has great advantages, such as low cost and convenient to conduct. Therefore, in this thesis finite element analysis is conducted by …

Fatigue Strength Of Steel Bridge Members With Intersecting Welds, David T. Delong, Mark D. Bowman

JTRP Technical Reports

The brittle fracture of the Hoan Bridge in December 2000 highlighted the fracture susceptibility of details containing intersecting welds in steel bridges. Though it is now known that details with intersecting welds should be avoided, many existing bridges in Indiana contain details with intersecting welds. Little experimental data on the fatigue performance of these details exists.

The purpose of this study was to evaluate the fatigue strength of several details commonly found in steel bridges in Indiana that contain intersecting welds. Large-scale experimental fatigue testing were performed using nine steel beams to study the behavior of three basic types of …

Ultimate Shear Capacity And Residual Prestress Force Of Full-Scale, Forty-One-Year-Old Prestressed-Concrete Girders, Parry Osborn

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The ultimate shear capacity of prestressed concrete beams is difficult to predict accurately, especially after being in service for an extended period of time. The Utah Department of Transportation asked researchers at Utah State University to experimentally determine the existing shear capacity of 41-year-old prestressed, decommissioned concrete bridge girders and then provide recommendations on how to increase that ultimate shear capacity. This thesis presents the research findings that relate to the existing shear capacity of the prestressed concrete girders.

Eight AASHTO Type II bridge girders were tested up to failure by applying external loads near the supports to determine their …

Data Analysis Of Utah's I-80 And I-215 Bridges - For The Use In The Development Of Accelerated Bridge Construction Standards, Erik S. Rosvall

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study discusses five bridges on Utah's I-80 that were replaced in the summer of 2008 using Accelerated Bridge Construction methods. Each superstructure was built offsite and moved into place with the use of Self-Propelled Modular Transporters. The bridges were instrumented and monitored during the moving process to investigate the effects of moving an entire superstructure into place. Collected data was analyzed to find the level of stress each superstructure experienced during lifting, moving, and placement of each bridge.

The change in supporting conditions from when the superstructure was built to being transferred onto Self-Propelled Modular Transporters caused significant stress …

Simulation Of Traffic Loading On Highway Bridges, Bernard Enright

Other resources

This work is based on weigh-in-motion measurements for approximately three million trucks obtained from sites in five European countries. Techniques have been developed, supported by photographic evidence, for filtering the measurements to identify and remove unreliable values, and for the classification of extremely heavy vehicles. The collected measurements have been used as the basis for building and calibrating a Monte Carlo simulation model for bridge loading. Two-lane traffic is simulated – either two lanes in the same direction or one lane in each direction. The model allows for vehicles that are both heavier and have more axles than in the …

Historic Bridge Evaluation Using Finite Element Techniques, Helena M. Charron

Masters Theses 1911 - February 2014

The present study examined the application of modern, computer-based analysis methods to two existing historic bridges in Massachusetts. The first bridge featured in this study is the Woronoco Bridge, a reinforced concrete open spandrel arch bridge that was constructed in 1923. It was hoped that a computer-based, parametric study of this bridge would prove it to be deck-stiffened, similar to select bridges of Swiss engineer Robert Maillart. However, the results do not support that there was any intent to reduce bending in the arch as a result of increasing the stiffness of the bridge deck. Instead, the Woronoco Bridge appears …

A New Congested Traffic Load Model For Highway Bridges, Colin C. Caprani, Colm Carey, Bernard Enright

Conference papers

Long span highway bridges are critical components of any nation’s infrastructure. Therefore accurate assessment of highway bridge loading is essential, and it is well known that congested traffic governs load effect for such bridges. Current congestion models use conservative assumptions about traffic and inter-vehicle gaps. This research investigates congested traffic flow through the use of traffic microsimulation which has the ability to reproduce complex traffic phenomena based on driver interactions. A time series model has been developed to produce a speed time-series similar to the results of the microsimulation. The speed time-series from the new model, combined with the established …

Management Strategies For Special Permit Vehicles For Bridge Loading, Bernard Enright, Eugene J. Obrien

Conference papers

An examination of weigh-in-motion data collected recently at sites in five European countries has shown that vehicles with weights well in excess of the normal legal limits are found on a daily basis. These vehicles would be expected to have permits issued by the responsible authorities. It can be seen from the measurements that most of them are travelling at normal speeds. Photographic evidence indicates that, while many are accompanied by an escort vehicle, normal traffic is flowing alongside in other lanes. As European freight volume grows, the frequency of these special vehicles can be expected to increase. Hence, the …

Site Specific Modelling Of Traffic Loading On Highway Bridges, Bernard Enright, Eugene J. Obrien

Conference papers

Accurate traffic loading models based on measured weigh-in-motion (WIM) data are essential for the accurate assessment of existing bridges. Much work has been published on the Monte Carlo simulation of single lanes of heavy vehicle traffic, and this can easily be extended to model the loading on bridges with two streams of traffic in opposing directions. However, a typical highway bridge will have multiple lanes in the same direction, and various types of correlation are evident in measured traffic, such as groups of very heavy vehicles travelling together and heavy vehicles being overtaken by lighter ones. These traffic patterns affect …

The Influence Of Correlation On The Extreme Traffic Loading Of Bridges, Eugene J. Obrien, Bernard Enright, A. T. Dempsey

Conference papers

Accurate traffic loading models based on measured data are essential for the accurate assessment of existing bridges. There are well-established methods for the Monte Carlo simulation of single lanes of traffic, and this can easily be extended to model the loading on bridges with two independent streams of traffic in opposing directions. However, a typical highway bridge will have multiple lanes in the same direction, and various types of correlation are evident in measured traffic. This paper analyses traffic patterns using multi-lane WIM data collected at two European sites. It describes an approach to the Monte Carlo simulation of this …

Characteristic Dynamic Increment For Extreme Traffic Loading Events On Short And Medium Span Highway Bridges, Eugene J. Obrien, Daniel Cantero, Bernard Enright, Arturo González

Articles

More accurate assessment of safety can prevent unnecessary repair or replacement of existing bridges which in turn can result in great cost savings at network level. The allowance for dynamics is a significant component of traffic loading in many bridges and is often unnecessarily conservative. Critical traffic loading scenarios are considered in this paper with a model that allows for vehicle-bridge interaction and takes into account the road surface condition. Characteristic dynamic allowance values are presented for the assessment of mid-span bending moment in a wide range of short to medium span bridges for bi-directional traffic.

Importance Of The Tail In Truck Weight Modeling For Bridge Assessment, Eugene J. Obrien, Bernard Enright, Abraham Getachew

Articles

To predict characteristic extreme traffic load effects, simulations are sometimes performed of bridge loading events. To generalize the truck weight data, statistical distributions are fitted to histograms of weight measurements. This paper is based on extensive WIM measurements from two European sites and shows the sensitivity of the characteristic traffic load effects to the fitting process. A semi-parametric fitting procedure is proposed: direct use of the measured histogram where there are sufficient data for this to be reliable and parametric fitting to a statistical distribution in the tail region where there are less data. Calculated characteristic load effects are shown …