Engineering Commons^™

Assessment Of Contract Terms And Conditions For Lump-Sum Contracts, Omar Othman

Theses and Dissertations

A Contract is a tool that defines the obligations of the contracting parties and assigns the risk between them. Contracts are usually drafted to meet the interests of the owner by addressing the legal issues and liabilities. Meanwhile, less emphasis is placed on clearly communicating the contract terms and ensuring that all contracting parties comprehend their risks and obligations. In a country like Egypt, which has faced drastic economic and political changes in the past few years, and yet is experiencing a boom in the construction sector, many developers tend to draft contracts that might be legally complicated or lacks …

Improving Safety Performance Of Highway Maintenance Crews Through Pre-Task Safety Toolbox Talks, Zamaan Al-Shabbani

Theses and Dissertations--Civil Engineering

The dangerous work environment in the construction industry and the inherent high risks associated with construction work make it the focus of safety training and regulations. Highway construction and maintenance has unique hazards but seemingly less directly applicable safety standards, regulations, and programs. Department of Transportation (DOT) employees working in highway maintenance are exposed to a variety of unique hazards specifically associated with their work and not relating to the adjacent traffic. Yet, highway construction and maintenance work has not received sufficient attention in terms of safety research and programs. The lack of safety training and education in highway construction …

A Microscopic Simulation Laboratory For Evaluation Of Off-Street Parking Systems, Yun Yuan

Theses and Dissertations

The parking industry produces an enormous amount of data every day that, properly analyzed, will change the way the industry operates. The collected data form patterns that, in most cases, would allow parking operators and property owners to better understand how to maximize revenue and decrease operating expenses and support the decisions such as how to set specific parking policies (e.g. electrical charging only parking space) to achieve the sustainable and eco-friendly parking.

However, there lacks an intelligent tool to assess the layout design and operational performance of parking lots to reduce the externalities and increase the revenue. To address …

Evaluation Of A Centrifuge Consolidation Technique To Determine The Effects Of Temperature And Time On Kaolinite Properties, Esteban Miranda Pinzon

Civil Engineering Undergraduate Honors Theses

Abstract

The effects of time and temperature on the moisture content and unit weight profiles, as developed during a centrifuge consolidation process, were observed during the research program that is described herein. Specifically, a Beckman-Coulter Model J6-MI centrifuge with a six-place JS-4.2A swinging bucket rotor was utilized to consolidate kaolinite slurry samples. The consolidation procedure utilized specially designed slurry consolidometers, made from acrylic tubes with inside diameters of 2.63 inches (6.67 cm) and heights of 5.13 inches (13.04 cm). The tested kaolinite slurry samples were created by mixing 400 grams of dry kaolinite clay powder with 200 grams of de-aired …

Evaluation Of Site Variability And Its Application In Design, Abu Hakim Muhammad Hasan Faisal

LSU Master's Theses

Geotechnical characterization has an important role in engineering geology as well as in implementation of any project. There are several variables and uncertainties involved in characterizing a project site. Four different sources of uncertainties represent the characterization of geotechnical variability, which include spatial variability, measurement error, statistical error and model bias. Spatial variability is expressed in terms of the mean, variance, and scale of fluctuation. Several statistical techniques such as the Gauge R & R, which includes X-Bar/R and ANOVA, and the Second Moment can be applied to compute site variability in terms of the coefficient of variations. Measurement error …

Nondestructive Evaluation Of Corrosion Damage In Reinforced Concrete Aged Slab Specimen, Rawya Abdulsattar Abduljabbar

Theses and Dissertations

The deterioration of concrete bridge decks presents a maintenance challenge for most transportation agencies and bridge owners. This problem increases during the freeze-thaw cycle. De-icing salts can accelerate the deterioration process. Corrosion of steel reinforcement in reinforced concrete structures is considered a dominant factor causing premature deterioration, especially those structures located in a coastal environment. The resulting corrosion product produced has several times the volume of steel, resulting in cracking of the concrete cover if the corrosion is significant. In this study, a bridge deck specimen was subjected to an artificial environment to accelerate the corrosion process. Prior to this …

Evaluation Of Sonocatalytic Degradation Of Ibuprofen And Sulfamethoxazole In The Presence Of Various Catalysts, Yasir Alhamadani

Theses and Dissertations

Over the last two decades, large quantities of products, such as medicines, disinfectants, and personal care products, have been released into surface waters and wastewater treatment facilities by the pharmaceutical and chemical industries which have come to the attention of scientists with regard to their impacts on life in lakes, rivers, and groundwater. Among various types of treatment processes, ultrasonic (US) treatment process was used in this study to investigate the effect catalysts and removal of selected pharmaceutical’s (PhACs) compounds (ibuprofen (IBP) and sulfamethoxazole (SMX)). Carbon nanomaterials (CNMs) have become candidates for numerous applications in nanocomposites, microelectric devices, sensors, energy …

Evaluation Of Non-Nuclear Devices In Measuring Moisture Content And Density Of Soils, Martin Jesus Sotelo

Open Access Theses & Dissertations

The objective of this report was to assess the ability of several different devices to measure moisture content and dry density of various compacted geomaterials. The experimental research involved the testing of different subgrade soils and one base material. More than a dozen specimens, 2 ft in height and 1.5 ft in diameter, were constructed to evaluate the Transtech SDG 200, Purdue TDR, and the Decagon 10 HS moisture content sensor. The Speedy Moisture Tester and DOT600 Roadbed Water Content Meter were also evaluated using individual soil samples. All materials were tested at five different moisture contents, but at their …

Evaluating Transit Systems In A University Environment The Clemson University Case Study, Katerina Bartman

All Theses

With the economy in a slow recovery, enrollment in higher education is
increasing. This means that universities across the country must accommodate these new students, their vehicles, and local transportation needs. Campus setting and ambiance is a treasured quality on a university campus resulting in the approval of additional surface lots and parking garages being difficult or restricted. To combat the increased number of single occupancy vehicles, universities are developing and encouraging the use of multimodal transportation by providing pedestrian, bicycle, and public transportation facilities along with providing users with the information necessary to make the optimal modal choice (Boyles, …

Significant Trade Contractor Performance Characteristics As Evaluated By Big-D Construction, Conrad C. Johnson

Theses and Dissertations

The purpose of this research is to determine which aspects, other than price, of trade contractor performance are the most important to the general contractor, Big-D Construction. The impression a trade contractor leaves on the project manager and superintendent provides an indication of their performance. To determine what tasks trade contractors perform that most greatly impact overall perception of the general contractor's project manager and superintendent, hundreds of trade contractors were evaluated in ten separate categories and were then given an overall rating. The correlation between each category and the overall rating was found. The categories were then sorted from …

Evaluation Of Alternative Water Resources For Cape Coast And Its Environs In Ghana, Alex Kumah

Electronic Theses and Dissertations

Cape Coast once a national capital of Ghana and its environs in recent years have constantly suffered perennial acute water shortage. The Brimsu dam which takes its supplies from the Kakum River with current production capacity of 1.4 × 104 m3/day cannot meet the water needs of the study area. The operating levels of the dam during crisis have reduced from 7.3 meters to 4.7 meters over the years with subsequent reduction in water production by 35%. Recently, the operating level has reduced further to about 3.5 meters with 60% reduction in water supply. This study evaluated alternative water resources …

Development And Evaluation Of Lime Mortars For Restoration Of Historic Buildings And Monuments, Tarek Said Mahfouz

Archived Theses and Dissertations

Monuments and historic buildings and sites are regarded as a national treasure of any country. This is particularly true for Egypt that possesses a wealth of historic and heritage buildings covering the entire life span of human civilization. It must be preserved and safeguarded not only as historic evidences but also as works of art. Most of these structures used lime based mortars as binding material. These structures are deteriorating at a rate faster than our ability to renovate them. The repair and rehabilitation of old historic walls and mortars involve a complex interaction of existing and new elements. Engineers …

Evaluation Of Two-Dimensional Hydraulic Modeling In A Natural River And Implications In Instream Flow Assessment Methods, Karl L. Tarbet

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Logan River was used as a study site to assess the capabilities of two-dimensional depth-averaged hydraulic modeling in the x-y plane of a natural river for use with instream flow studies. Data were collected to spatially represent the study reach with depth, velocity, northing, easting, elevation, and substrate values using a total station and electronic velocity meter. Computational finite element meshes were generated using four different density levels of geometry data to examine the relationship between field data density and computational mesh on geometry errors. Geometry errors were found to be related to smoothing effects, which removed complex channel …

Design And Evaluation Of Stepped Spillways For High Dams, Jeffrey Scott Rau

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research was to investigate the hydraulic performance of stepped spillways. A thorough investigation was made of all printed material on stepped spillways, and a summary of this material is presented in the text. Data from experiments in the laboratory were used to develop a design procedure for stepped spillways and hydraulic jump stilling basins. The experimental study was conducted at Utah State University - Utah Water Research Laboratory in Logan, Utah. Four models were built and tested in the laboratory under various flowrates.

The crest of the model spillway was constructed in the shape of a …

Evaluation Of A Welded Wire Retaining Wall, Jerold Albert Bishop

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this paper is to evaluate the performance of a Welded Wire Retaining Wall and present design recommendations for its future use. Field data from the instrumentation of a Welded Wire Retaining Wall as well as laboratory data from a study of welded wire fabric as a reinforcing agent for soil was gathered. A study of the theory and practice of reinforced soil construction was made. On the basis of this study and the experimental data obtained, the wall is evaluated and design recommendations presented.