Engineering Commons^™

Load Reduction Of Floating Wind Turbines Using Tuned Mass Dampers, Gordon M. Stewart

Masters Theses 1911 - February 2014

Offshore wind turbines have the potential to be an important part of the United States' energy production profile in the coming years. In order to accomplish this wind integration, offshore wind turbines need to be made more reliable and cost efficient to be competitive with other sources of energy. To capitalize on high speed and high quality winds over deep water, floating platforms for offshore wind turbines have been developed, but they suffer from greatly increased loading. One method to reduce loads in offshore wind turbines is the application of structural control techniques usually used in skyscrapers and bridges. Tuned …

A Quantitative Analysis Of The Impacts From Selected Climate Variables Upon Traffic Safety In Massachusetts, Katrina M. Hecimovic

Masters Theses 1911 - February 2014

Current literature predicts that climate change may increase both the occurrence and severity of heavy rainfall events and winter precipitation in the Northeast United States. A potential increase in intense precipitation events related to climate change would theoretically also cause an increase in weather-related delays, increase in overall traffic disruptions, a substantive shift in travel behavior, and presumably a negative effect on safety and maintenance operations of highways. This current research study examines the existing impacts from both an operational and behavioral perspective of how weather events currently impact overall safety along routes in Massachusetts. A secondary objective of the …

Vehicle Miles Traveled (Vmt) Fee Financing Alternatives: Lessons Learned And Future Opportunities, Ashley L. Costa

Masters Theses 1911 - February 2014

State Departments of Transportation (DOTs) today are seeking financing alternatives so that transportation infrastructure investments can become less dependent on the amount of fuel U.S. drivers consume. Because the fuel tax is no longer viewed as a sustainable and stable option, other financing alternatives are being considered. One such alternative includes the vehicle miles traveled (VMT) fee. Examples of such VMT fee alternatives include: 1) collection using an onboard diagnostic system (OBD), 2) collection at the fuel pump using an OBD in conjunction with GPS technology, and 3) collection at a vehicle inspection station using the OBD.

This proposed research …

Interfacial Strength Between Prestressed Hollow Core Slabs And Cast-In-Place Concrete Toppings, Ryan M. Mones

Masters Theses 1911 - February 2014

The horizontal shear strength of the interface between prestressed concrete hollow core slabs and cast-in-place concrete topping slabs was evaluated through a set of 24 push-off experiments. The push-off test specimens featured segments of dry-mix and wet-mix hollow core slabs with a variety of surface treatments including machine finished, sandblasted, broom roughened, rake roughened and grouted. A cast-in-place slab was poured on top of the hollow core specimens to form a 15 inch by 15 inch interface between the two materials. Results indicate the average horizontal shear strength of the push-off specimens was 227 psi. Higher shear strength and slip …

Development Of A Cost Minimizing Strategy To Mitigate Bird Mortalities In A Wind Farm, Karamvir Singh

Masters Theses 1911 - February 2014

Wind is the second largest renewable energy source after solar. It is one of the fastest growing sources of electricity in the world and currently of wind energy is installed in the United States and an additional is under construction (Office of Energy and Environment Affairs, 2011). For the growth of wind electricity, one of the most prominent environmental concerns relates to the death of birds, bats and other avian species resulting from collision with turbine blades.

This thesis develops a model that provides the optimal strategy of turning the turbines off in a wind farm for certain periods to …

Driver Dynamics And The Longitudinal Control Model, Gabriel G. Leiner

Masters Theses 1911 - February 2014

Driver psychology is one of the most difficult phenomena to model in the realm of traffic flow theory because mathematics often cannot capture the human factors involved with driving a car. Over the past several decades, many models have attempted to model driver aggressiveness with varied results. The recently proposed Longitudinal Control Model (LCM) makes such an attempt, and this paper offers evidence of the LCM's usefulness in modeling road dynamics by analyzing deceleration rates that are commonly associated with various levels of aggression displayed by drivers. The paper is roughly divided into three sections, one outlining the LCM's ability …

New Technologies In Short Span Bridges: A Study Of Three Innovative Systems, Andrew Lahovich

Masters Theses 1911 - February 2014

Short span bridges are commonly used throughout the United States to span small waterways and highway overpasses. New technologies in the civil engineering industry have aided in the creation of many unique designs of these short span highway bridges in efforts to decrease construction cost, decrease maintenance costs, increase efficiency, increase constructability, and increase safety. Three innovative systems, the Integral Abutment Bridge, “Bridge-in-a-Backpack”, and the Folded Plate Girder bridge will be analyzed to study how the bridges behave under various types of loading.

Detailed finite element models were created for integral abutment bridges of varying geometry. These models are used …

Evaluation Of Live-Load Distribution Factors (Lldfs) Of Next Beam Bridges, Abhijeet Kumar Singh

Masters Theses 1911 - February 2014

A new precast-prestressed cross section was recently developed by a consortium of engineers from the six New England states, New York and members of the northeast region of PCI. The northeast extreme Tee (NEXT) beam is efficient for medium Bridge spans (50 to 80 ft long). Field formwork savings are introduced by having a flange cast integrally during fabrication of the beams at the precasting plant. Job safety is increased because a working platform is created. The flange width of the NEXT Beams can be adjusted during fabrication to accommodate roadways of different widths and skew angles. Because the section …

Material Characterization And Computational Simulation Of Steel Foam For Use In Structural Applications, Brooks H. Smith

Masters Theses 1911 - February 2014

Cellular metals made from aluminum, titanium, or other metals are becoming increasingly popular for use in structural components of automobiles, aircraft, and orthopaedic implants. Civil engineering applications remain largely absent, primarily due to poor understanding of the material and its structural properties. However, the material features a high stiffness to weight ratio, excellent energy dissipation, and low thermal conductivity, suggesting that it could become a highly valuable new material in structural engineering. Previous attempts to characterize the mechanical properties of steel foam have focused almost exclusively upon uniaxial compression tests, both in experimental research and in computational simulations. Further, computational …

User Equilibrium In A Disrupted Network With Real-Time Information And Heterogeneous Risk Attitude, Ryan J. Pothering

Masters Theses 1911 - February 2014

The traffic network is subject to random disruptions, such as incidents, bad weather, or other drivers’ random behavior. A traveler’s route choice behavior in such a network is thus affected by the probabilities of such disruptions, his/her attitude towards risk, and real-time information on revealed traffic conditions that could potentially reduce the level of uncertainty due to the disruptions. As the road network’s performance is de-termined collectively by all travelers’ choices, it is also affected by these factors. This thesis features the development of a multi-class user equilibrium model based on hetero-geneous risk attitude distributions and a user equilibrium model …

Probabilistic Analysis Of Offshore Wind Turbine Soil-Structure Interaction, Wystan Carswell

Masters Theses 1911 - February 2014

A literature review of current design and analysis methods for offshore wind turbine (OWT) foundations is presented, focusing primarily on the monopile foundation. Laterally loaded monopile foundations are typically designed using the American Petroleum Institute (API) p-y method for offshore oil platforms, which presents several issues when extended to OWTs, mostly with respect to the large pile diameters required and the effect of cyclic loading from wind and waves. Although remedies have been proposed, none have been incorporated into current design standards. Foundations must be uniquely designed for each wind farm due to extreme dependence on site characteristics. The uncertainty …

Evaluating And Modeling Traveler Response To Real-Time Information In The Pioneer Valley, Tyler De Ruiter

Masters Theses 1911 - February 2014

This study used focus groups and surveys to provide a comprehensive evaluation of the Regional Traveler Information Center (RTIC) at UMass Amherst. The evaluation was completed by obtaining the awareness, usage, and perceived effectiveness of RTIC’s information by residents in the Pioneer Valley. It was found that awareness of RTIC is limited due to its lack of advertisement. Usage is focused primarily on its webcams and advisory information. Surveys showed that participants perceive RTIC to be useful, even though they may never have seen the information before (the survey provided a chance for them to become familiar with the service). …

Vibration Reduction Of Offshore Wind Turbines Using Tuned Liquid Column Dampers, Colin Roderick

Masters Theses 1911 - February 2014

Offshore wind turbines (OWTs) are becoming an accepted method for generating electricity. The environmental conditions of offshore locations often impose high wind and wave forces on OWTs making them susceptible to intense loading and undesirable vibrations. One method to reduce system vibrations is through the use of structural control devices typically utilized in civil structures. Tuned liquid column dampers (TLCDs) show great promise in the application to OWTs due to their high performance and low cost. This thesis examines the use of TLCDs in OWTs.

Equations of motion for limited degree-of-freedom TLCD-turbine models are presented. A baseline analysis of each …

Spatial And Temporal Correlations Of Freeway Link Speeds: An Empirical Study, Piotr J. Rachtan

Masters Theses 1911 - February 2014

Congestion on roadways and high level of uncertainty of traffic conditions are major considerations for trip planning. The purpose of this research is to investigate the characteristics and patterns of spatial and temporal correlations and also to detect other variables that affect correlation in a freeway setting. 5-minute speed aggregates from the Performance Measurement System (PeMS) database are obtained for two directions of an urban freeway – I-10 between Santa Monica and Los Angeles, California. Observations are for all non-holiday weekdays between January 1st and June 30th, 2010. Other variables include traffic flow, ramp locations, number of lanes and the …