Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 3 of 3
Full-Text Articles in Engineering
Strain Distribution And Crack Detection In Thin Unbonded Concrete Pavement Overlays With Fully Distributed Fiber Optic Sensors, Yi Bao, Genda Chen
Strain Distribution And Crack Detection In Thin Unbonded Concrete Pavement Overlays With Fully Distributed Fiber Optic Sensors, Yi Bao, Genda Chen
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
This study aims at evaluating the feasibility of strain measurement and crack detection in thin unbonded concrete pavement overlays with pulse prepump Brillouin optical time domain analysis. Single-mode optical fibers with two-layer and three-layer coatings, respectively, were applied as fully distributed sensors, their performances were compared with analytical predictions. They were successfully protected from damage during concrete casting of three full-scale concrete panels when 5 to 10-cm-thick protective mortar covers had been set for 2 h. Experimental results from three-point loading tests of the panels indicated that the strain distributions measured from the two types of sensors were in good …
Corrosion Resistance Of A Sand Particle-Modified Enamel Coating Applied To Smooth Steel Bars, Fujian Tang, Genda Chen, Richard K. Brow, Michael L. Koenigstein
Corrosion Resistance Of A Sand Particle-Modified Enamel Coating Applied To Smooth Steel Bars, Fujian Tang, Genda Chen, Richard K. Brow, Michael L. Koenigstein
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
The protective performance of a sand particle-modified enamel coating on reinforcing steel bars was evaluated in 3.5 wt% NaCl solution by electrochemical impedance spectroscopy (EIS). Seven percentages of sand particles by weight were investigated: 0%, 5%, 10%, 20%, 30%, 50% and 70%. The phase composition of the enamel coating and sand particles were determined with the X-ray diffraction (XRD) technique. The surface and cross-sectional morphologies of the sand particle-modified enamel coating were characterized using scanning electron microscopy (SEM). XRD tests revealed three phases of sand particles: SiO2, CaCO3 and MgCO3. SEM images demonstrated that the …
Deck Replacement - Use Of Extra Coating Thickness Epoxy-Coated Bars, J. A. Ramirez, Rachel Elizabeth Henkhaus
Deck Replacement - Use Of Extra Coating Thickness Epoxy-Coated Bars, J. A. Ramirez, Rachel Elizabeth Henkhaus
JTRP Technical Reports
The results of this study were implemented in the form of design recommendations for bond of epoxy-coated bars with thicker coatings up to 18 mils. The scope of the work included evaluation of AASHTO LRFD (2004) and ACI 318 design recommendedations for the development and splice length of extra epoxy-coating thinkness reinforcing bars in normal-weight concrete bridge decks and a proposed monitoring plan for a generic concrete bridge deck in Indiana where epoxy-coated bars with thicker coatings might be emeployed. The use of the current provisions for development and splice length of epoxy-coated bars in tension in both the AASHTO …