Engineering Commons^™

Strengthening Of Concrete Deep Beams Using Carbon Fabric Reinforced Cementitious/Geopolymeric Matrix, Nour Mohamed Muhsen Khir Allah

Theses

This research aimed to examine the effectiveness of using carbon fabric-reinforced matrix (C-FRM) composites to improve the shear response of reinforced concrete (RC) deep beams. Ten RC deep beams with a/h of 1.6 were tested, where a is the shear span and his is the beam depth. Test parameters included the presence of internal shear reinforcement (no shear reinforcement and minimum shear reinforcement), number of C-FRM composite layers (one and two layers), angle of inclination of the second layer of CFRM (90o and 0o with respect to the longitudinal direction of the beam), and type of matrix (cementitious and geopolymer). …

Shear Strengthening Of Reinforced Concrete Beams Using Textile-Reinforced Mortar, Oluwafunmilayo Morenike Awani

Theses

The effectiveness of using carbon textile-reinforced mortar as an innovative technique to improve the shear response of reinforced concrete beams has been investigated. The research comprised double-shear bond testing on bond behavior of textile-reinforced mortar, large-scale beam testing on shear response of reinforced concrete beams strengthened with textile-reinforced mortar, and nonlinear finite element modeling of the tested beam specimens. Test variables of the double-shear bond testing were the matrix type, and width/length of the bonded area, whereas for the large-scale beam testing, the variables included the number of textile-reinforced mortar layers, matrix type, and amount of internal stirrups. Results of …

Structural Response Of Flexure-Deficient Reinforced Concrete Continuous Slabs Strengthened With Composites, Jwan Ahmad Al Khalil

Theses

Accidental reduction in the amount of steel in continuous reinforced concrete (RC) floor slabs is a typical problem that might occur due to an error in design, unclear drawings, or overlooked verification of reinforcement prior to concrete casting. Existence of such deficiencies would compromise the load capacity and serviceability of RC floor slabs. This research examines the effectiveness of using fiber-reinforced polymers (FRP) to improve the structural response of flexure-deficient continuous RC slab strips. The study comprised experimental testing and finite element (FE) modeling. Sixteen two-span RC slab strips, 400 x 125 x 3800 mm each, were tested. Test parameters …

Performance Of Reinforced Concrete Beams Strengthened With Mechanically-Fastened Composite System Under Corrosive Environment, Amna Zaid Suwaid Al Nassibi

Theses

This study examines the effects of corrosion exposure on the flexural response of reinforced concrete (RC) beams strengthened with a powder-actuated fastened (PAF) composite system. Twenty-one RC beams were constructed and tested to failure under four-point bending. The corroded beams were subjected to 30, 60, and 100 days of accelerated corrosion that corresponded to measure tensile steel mass losses of 6, 11 and 18% respectively. Other test parameters included width of fiber reinforced polymer (FRP) composite strip, fastener length, and number of fasteners rows.

For the non-corroded beams, the PAF-FRP system resulted in up to 24% increase in beam flexural …

Investigation Of The Mechanical Behavior Of I-Shaped Steel Beams Strengthened By Mechanically-Fastened Frp Laminates, Hothifa Nayef Rojob

Theses

Retrofitting and strengthening of steel structures have gained significant importance due to the highly increasing number of deteriorated steel structures in many places around the globe. The conventional method of retrofitting or strengthening of steel structures by replacing steel members or attaching additional external steel plates are usually time-consuming, corrodible, and a cumbersome task. Many of the drawbacks of the conventional retrofitting systems can be overcome through the use of Fiber Reinforced Polymers (FRP) due to their high strength-to-weight ratio. Furthermore, FRP materials are corrosion resistant, which makes them more durable especially when environmental deterioration is a concern. In recent …