Engineering Commons^™

Effect Of Radiation On Bond Behavior Between Concrete And Steel Bar: Development Of Experimental Protocol, Mohammed Abdelrahman

Masters Theses

There is a need to assess the effect of radiation on the behavior of bond strength between steel reinforcement and concrete. However, there is geometrical constraints in the cylindrical capsule which limit the size of concrete samples. Thus, developing a protocol to produce pullout sample and a test setup is needed.

A protocol for fabricating high-precision concrete samples with embedded \#2 steel bar has been developed based on the results of an experimental program. A pullout system has also been developed to investigate the bond activity of concrete and steel. This research looks at two different aggregate sizes 3/8 inch …

Development Of Test Methods For Characterizing Extrudability Of Cement-Based Materials For Use In 3d Printing, Jonathan Thomas Kuchem

Masters Theses

"3D printing is the process of creating three-dimensional objects using an automated additive manufacturing process. The 3D printing process has been used with materials such as metals and polymers, but application with cement based materials for the construction industry has yet to be developed. In this research, two main problems were investigated for printing cement based composite materials: extrudability and tensile reinforcement. Fiber-reinforced concrete (FRC) was studied as an internal reinforcing system to increase tensile/flexural strength. First, FRC was studied to investigate mechanical properties and use of fibers from waste tires as an environmentally friendly option. A reference mixture with …

Numerical And Experimental Analysis Of Local Buckling Of Axially Loaded Steel Tubes Confined By Concrete And Frp, Nicholas Colbert

Masters Theses

“The hollow core Fiber-Reinforced-Polymer (FRP) concrete circular-steel (HC-FCS) column consists of an outer circular fiber reinforced polymer (FRP) tube, an inner thin-walled circular steel tube concentrically aligned, and a concrete shell between them. Research has been performed on the performance of the member as a whole, but to date, there has been no investigation into the behavior of the steel tube confined in the column. 17 small-scale columns were tested under axisymmetric axial compressions applied directly to the steel tube under displacement control. The conducted parametric study examined the effects of diameter-to-thickness (D/t) ratio, concrete unconfined compressive strength, FRP thickness, …

Development Of High Early-Strength Concrete For Accelerated Bridge Construction Closure Pour Connections, Stephanie Castine

Masters Theses

Accelerated bridge construction (ABC) has become a popular alternative to using traditional construction techniques in new bridge construction and existing bridge deck replacement because of the reduction of time spent in field activities. A key feature of bridges built using ABC techniques is the extensive use of prefabricated components. Prefabricated components are joined in the field using small volume closure pours involving high performance materials (steel and concrete) to ensure adequate transfer of forces between components. To date, the materials developed for closure pours have been based on proprietary components, so a need has arisen for development of mixes that …

Advanced Sustainable Concrete Materials For Infrastructure Applications, Kaylea Ann Smith

Masters Theses

"This study was performed to examine the effects of cement replaced by high volumes of Class C fly-ash on durability characteristics of concrete up to 120 days. Specifically, this study investigates possibility of amending American Society for Testing and Materials (ASTM) to allow High Volume Fly-ash (HVFA) concrete to cure until later ages prior to testing instead of 28 days. Five mix designs were compared with varying fly-ash percentages from 0 to 70% (by total cementitious mass). No other additives were present in any of the five mix designs. Water-to-cementitious ratio (w/cm) and total cementitious material remained constant as 0.40 …

Effects Of High Volume Fly Ash And Powder Activators On Plastic And Hardened Concrete Properties, Drew Alexander Davis

Masters Theses

This study was performed to examine the effects of high volumes of Class C fly ash modified by powder activators upon the plastic and hardened properties of concrete. In a companion study, five Missouri area cements and five Class C fly ashes were examined for incompatibilities, with the most and least reactive combinations being scaled up to full scale concrete testing. Two baseline concrete mixtures were examined, the only difference in mixtures being the sources of portland cement and fly ash. Fly ash replacement was examined at 50% and 70% replacement (by total cementitious mass). Three powder activators were used …

Comparison Of Two Methods For The Assessment Of Chloride Ion Penetration In Concrete: A Field Study, Eric William Ryan

Masters Theses

The currently accepted method for assessing the resistance of concrete to penetration of chloride ions is ASTM C1202, commonly known as the “Rapid Chloride Permeability (RCP) Test.” The test is time-consuming, laborious, has rather high variability, and, is to a degree, user sensitive, making it problematic for inclusion in a performance-based specification. A potential alternative to the RCP test is the “Surface Resistivity (SR) Test”, a method which is dramatically easier, faster, and has less variability than the RCP test. The research reported herein was directed toward determining a correlation between RCP and SR test measurements for Tennessee bridge deck …