Engineering Commons^™

Controlling Differentiation Of Adult Stem Cells Via Cell-Derived Nanoparticles: Implications In Bone Repair, Shruthi Polla Ravi, Yasmeen Shamiya, Aishik Chakraborty, Ali Coyle, Alap A. Zahid, Jin Wang, Michael Boutilier, Emmanuel Ho, Arghya Paul

Chemical and Biochemical Engineering Publications

No abstract provided.

Quantification Of Flows Emerging From Small Pores In Plane Walls, Matia Peter Edwards

Electronic Thesis and Dissertation Repository

Current membrane separation processes are limited in high production and high purity settings due to a trade-off between selectivity and permeance. Methods of creating nanoscale geometries in 2D materials are emerging and present an opportunity for fast, size selective mass transport that can be tailored to a wide array of applications. This thesis develops a method for quantifying flow through small pores in plane walls based on the behaviour of a solute dispersed in a downstream reservoir. This method is validated for a range of micropore diameters, for which flow rates can be calculated with confidence, and is shown to …

Production Of Cellulose-Based Superabsorbent Polymers For Soil Water Retention, Rosa Maria Arredondo Ramirez

Electronic Thesis and Dissertation Repository

Superabsorbent polymers (SAPs) have attracted tremendous attention, with researchers noting that their high water absorption capacity (AC) is valuable for various applications, especially in agricultural contexts. Two types of materials can be used to produce SAPs: fossil-based (which are harmful to the environment) and bio-based (which are significantly more environmentally friendly, given their biodegradability and minimal toxic side effects). Although bio-based SAPs (Bio-SAPs) are preferable due to their environmental merits, their preparation tends to be time consuming and labour intensive, and their AC is still far below expectations. To address these problems, a novel, eco-friendly, cellulose-based superabsorbent polymer (Cellulo-SAP) was …

Teb 406 Reflection, Ryan Alfonso Falcon

Undergraduate Student Research Internships Conference

Slides for a non-exhaustive reflection on my work in summer

Improving The Crystal Habit Of Rufinamide, Peter M. Sadaka

Undergraduate Student Research Internships Conference

This research was developed by utilizing the knowledge gathered and learned about crystallization through my USRI project. The goal was to improve the crystal habit of a selected drug from the many that were available in the lab. To choose this, we looked at all of them and chose the drug with the worst habit and then began working. It was created by organizing my findings for each week and then making it all much more concise for the form of a simple presentation that most could understand.

Improving Electrical Properties Of Polypropylene/Gnp Composites Using Compatibilizer And Solvent-Assisted Melt Blending, Yazan Al Jawhari

Undergraduate Student Research Internships Conference

Over the past few years, polymer products have become essential to our lives. Many people may think that polymers are simply plastics, however, that is just the tip of the iceberg. Polymer products are used in food, sport, medical, and technological industries. There have been numerous applications in all these areas, but in the technological industry, electronic devices, in particular, are affected by electrostatic discharge (ESD) generated by friction during handling, packaging, or transportation. This requires the use of antistatic packaging, a special package that has low electrical resistivity in order to avoid electron accumulation.

This study is an attempt …

Identification And Distribution Analysis Of The Mid-Phase In A Low-Velocity Gas-Solid Fluidized Bed, Zhenan Zhang

Electronic Thesis and Dissertation Repository

The intermediate phase in low-velocity gas-solid fluidized beds generally presents excellent gas-solid contact in the systems. However, no comprehensive understanding of this vital phase is available in the literature. Therefore, this study proposed a statistical method to identify this intermediate phase, named ‘mid-phase’ in this thesis, to interpret the system performance based on the analysis of solids holdup in a low-velocity gas-solid fluidized bed.

The distributions of the mid-phase are investigated along both radial and axial directions in consideration of different flow regimes. The result shows that the turbulent regime contains a higher amount of mid-phase and the spatial mid-phase …

Developing Accurate Methods To Measure Pressure Fluctuations In Fluidized Beds, Lama Abdulal

Undergraduate Student Research Internships Conference

In gas-solid fluidized beds, pressure measurements provide essential information on bed hydrodynamics and any issues in signal detection. Because solids tend to pass through the line that connects a pressure tap[1]to a pressure transducer, a backflushing system helps to prevent the plugging of this line. This study focuses on designing the backflushed system to minimize any degradation in the pressure signal between the fluidized bed and the pressure transducer. To test, a vessel was pressurized to compare the responses of a backflushed system and a reference transducer to a sudden change in pressure. The results showed that the …

Development Of A Cold Model Fuild Coker Pilot Plant, Jessica A. Godin

Electronic Thesis and Dissertation Repository

Fluid Coking^TM is an upgrading process used to produce higher-value products from heavy hydrocarbons through thermal cracking. A Hot Pilot Plant is being designed for potential use to optimize commercial Fluid Cokers.

A Cold Model Fluid Coker was operated in this thesis to identify design limitations restricting operation at the required conditions. Design changes were implemented, and their impact on the system fluid dynamics were characterized. Successful operation of at required conditions was demonstrated.

Pressure measurements provided rapid feedback on potential issues. Models for bed expansion and entrainment flux were developed, which can be used to extrapolate to the …

Development Of Photocatalytic Reactor System For Dye Degradation From Lab To Pilot Scale, Waleed Jadaa

Electronic Thesis and Dissertation Repository

The overall goal of the research is to develop a novel photocatalytic reactor system, namely, a bubble column photoreactor for the degradation of resistant pollutants, with a particular emphasis on azo dyes. To achieve the objective, different sub-objectives were performed employing lab and pilot-scale reactors with the application of simulated wastewater. Direct Blue (DB15) was used as a model compound for the azo dyes class for this study. Firstly, the influence of various variables such as pH, dye concentration, and catalyst loading to determine optimal combinations of DB15 removal. The experiments were conducted in a swirl flow photoreactor under the …

Novel Fed-Batch Process With In-Situ Product Recovery For Glycerol Fermentation To Butanol Using Clostridium Pasteurianum, Ammi Jani

Electronic Thesis and Dissertation Repository

Butanol, a next-generation biofuel, can be produced by fermenting glycerol using Clostridium pasteurianum. To address product inhibition, an integrated system that combined a fed-batch process with pervaporation was assessed against conventional batch and fed-batch fermentations. This study showed that with the novel process configuration, the productive fermentation time could be extended, translating to a 2.4-fold and 1.9-fold increase in butanol production relative to baseline fed-batch and batch operation, respectively. Further, it was demonstrated that butanol concentrations were able to be maintained below inhibitory levels throughout the fermentation. Despite this outcome, metabolic oscillations were revealed, indicating instability in the process. The …

Co-Gasification Of Biomass And Plastic Waste In A Bubbling Fluidized Bed Reactor, Islam Elghamrawy

Electronic Thesis and Dissertation Repository

Plastics are versatile, durable, and can be manipulated to match different needs. The COVID-19 pandemic has demonstrated the importance of reducing plastic waste and is believed to be responsible for increasing the generation of plastic waste by 54,000 tons/day which was reported in 2020. Another widely available waste is biomass waste. Agriculture and agroforestry, forest and wood processing, municipal waste, and the food industry are all considered major producers of biowaste. Co-gasification is considered one of the most promising methods of chemical recycling that targets the production of syngas (hydrogen and carbon monoxide) and light hydrocarbon gases. In this study, …

The Electrical, Thermal, And Morphological Properties Of Microinjection-Molded Polypropylene Nanocomposites, Renze Jiang

Electronic Thesis and Dissertation Repository

Microinjection molding (µIM) exhibits significantly higher shear rates and faster cooling rates, as compared to conventional injection molding, which affect the characteristics of its final products. The effect of carbon black (CB), carbon nanotubes (CNT), and graphene nanoplatelet (GNP) fillers on the electrical conductivity properties of microinjection-molded polypropylene (PP) nanocomposites was systematically studied. Results showed the electrical conductivity properties of PP/CNT and PP/CB microparts were significantly influenced by mold geometry. PP/CNT/CB hybrid filler microparts demonstrated synergistic increases in electrical conductivity and crystallization temperature with higher CNT loading. Morphological observations indicated significant CB and CNT phase separation. Powder-PP/GNP composites exhibited higher …

Sol-Gel Derived Bioceramic Poly(Diethyl Fumarate – Co – Triethoxyvinylsilane) Composite, Aref Sleiman

Electronic Thesis and Dissertation Repository

Synthetic bone graft materials have become an increasingly popular choice for bone augmentation. Ceramic-based and polymer-based bone graft materials constitute the two main classes of synthetic bone graft materials. This study investigated the synthesis of novel bioactive composites for their potential use as bone graft biomaterials. Poly(diethyl fumarate-co-triethoxyvinylsilane)/bioceramic class II organic/inorganic hybrid biomaterials were synthesized via a sol gel process. These biomaterials were then reacted with an ammonium phosphate solution to prepare their respective composites. For the first time, we successfully synthesized sol-gel derived bioceramic poly(diethyl fumarate-co-triethoxyvinylsilane) composites. In vitro bioactivity evaluation of poly(diethyl fumarate-co-triethoxyvinylsilane)/bioceramic composites in simulated body fluid …

The Greenest Solar Power? Life Cycle Assessment Of Foam-Based Flexible Floatovoltaics, Koami Soulemane Hayibo, Pierce Mayville, Joshua M. Pearce

Electrical and Computer Engineering Publications

This study presents a life cycle analysis (LCA) of a 10 MW foam-based floatovoltaics (FPV) plant installed on Lake Mead, Nevada, U.S. A material inventory of the flexible crystalline silicon (c-Si)-based module involved massing and determination of material composition of the module's encapsulation layers with ATR/FTR spectroscopy and electron microscopy. The LCA was performed using SimaPro and the results were interpreted in terms of cumulative energy demands, energy payback time, global warming potential, GHG emissions, and water footprint including negative values for reduced evaporation. A sensitivity analysis was performed on the lifetime of the modules and the foam-based racking. The …

Mass Advection–Diffusion In Creeping Flow Through An Orifice Plate: A Model For Nanoporous Atomically Thin Membranes, Harpreet Atwal, Anika Wong, Michael Boutilier

Chemical and Biochemical Engineering Publications

Continuum transport equations are commonly applied to nanopores in atomically thin membranes for simple modeling. Although these equations do not apply for nanopores approaching the fluid or solute molecule size, they can be reasonably accurate for larger nanopores. Relatively large graphene nanopores have applications in small particle filtration and appear as unwanted defects in large-area membranes. Solute transport rates through these nanopores determine the rejection performance of the membrane. Atomically thin membranes commonly operate in a regime where advection and diffusion both contribute appreciably to transport. Solute mass transfer rates through larger nanopores have previously been modeled by adding continuum …

Contact‐Free Remote Manipulation Of Hydrogel Properties Using Light‐Triggerable Nanoparticles: A Materials Science Perspective For Biomedical Applications, Cho-E Choi, Aishik Chakraborty, Ali Coyle, Yasmeen Shamiya, Arghya Paul

Chemical and Biochemical Engineering Publications

Considerable progress has been made in synthesizing “intelligent”, biodegradable hydrogels that undergo rapid changes in physicochemical properties once exposed to external stimuli. These advantageous properties of stimulus-triggered materials make them highly appealing to diverse biomedical applications. Of late, research on the incorporation of light-triggered nanoparticles (NPs) into polymeric hydrogel networks has gained momentum due to their ability to remotely tune hydrogel properties using facile, contact-free approaches, such as adjustment of wavelength and intensity of light source. These multi-functional NPs, in combination with tissue-mimicking hydrogels, are increasingly being used for on-demand drug release, preparing diagnostic kits, and fabricating smart scaffolds. Here, …

Leveraging The Advancements In Functional Biomaterials And Scaffold Fabrication Technologies For Chronic Wound Healing Applications, Alap A. Zahid, Aishik Chakraborty, Yasmeen Shamiya, Shruthi Polla Ravi, Arghya Paul

Chemical and Biochemical Engineering Publications

Exploring new avenues for clinical management of chronic wounds holds the key to eliminating socioeconomic burdens and health-related concerns associated with this silent killer. Engineered biomaterials offer great promise for repair and regeneration of chronic wounds because of their ability to deliver therapeutics, protect the wound environment, and support the skin matrices to facilitate tissue growth. This mini review presents recent advances in biomaterial functionalities for enhancing wound healing and demonstrates a move from sub-optimal methods to multi-functionalized treatment approaches. In this context, we discuss the recently reported biomaterial characteristics such as bioadhesiveness, antimicrobial properties, proangiogenic attributes, and anti-inflammatory properties …