Engineering Commons^™

Experimental Study Of The Chimney Height Variation Against Double Pots Biomass Stove Performance, Faisal Faisal, Adi Setiawan, Wusnah Wusnah, Khairil Khairil, Luthfi Luthfi, Mona Fajriana

Makara Journal of Technology

This research aims to get optimal chimneys height of double pots biomass stove. Optimal chimneys height needs to provide best performance of the stove. Experimental study was done by varied the chimney heights. Water boiling test as the standard method was used to obtained stove performance for each chimney height variation. The results showed that best performance stove was the one with 1.65 cm chimney height, with thermal efficiency at 37.66%.

Characterization Of Catalysts For Hydrodeoxygenation Of Bio-Oils Using Phenol As A Model Compound, Abdulazeez Mohammed Khlewee

Electronic Theses and Dissertations

Due to the environmental considerations, depletion of fossil fuel reserves and fluctuating non-renewable fuel price, converting non-edible lignocellulosic biomass into renewable energy resources has gained significant importance. Phenol has been chosen as a model compound for catalytic screening because it is abundant in bio-oil composition and shows a high resistance to oxygen removal during hydrodeoxygenation (HDO) reactions. HDO of phenol produces chemicals that can be used as transportation fuels (Aromatics) or fuel additives. Theoretically, HDO of phenol has two distinct reduction pathways: direct deoxygenation (DDO) and hydrogenation (HYD). The previous results published by our group showed a precedent activity and …

So2-Alcohol-Water Fractionation Of Sugarcane Straw, Asif Sharazi

Electronic Theses and Dissertations

Climate change resulting from fossil fuels combustion is motivating researchers to explore feasible routes to convert renewable biomass into biofuels and biochemicals for a sustainable society. Typically, biofuel is produced from corn or sugarcane but both feedstocks compete with human food supply. Thus, lignocellulosics as renewable feedstock represent a more ethical and ecofriendly approach. Sugarcane straw (SCS) is a cheap and abundantly available feedstock which potentially can be used for biofuels/biochemicals production. It can also help to mitigate environmental and health problems resulting from conventional practice of SCS burning in the fields.

There are different biomass conversion technologies for production …

Batch And Fed Batch Cultivation And Harvesting Of Nannochloropsis Gaditana For Environmental Applications, Roopa P. Devasya

Electronic Thesis and Dissertation Repository

Two challenging problems facing our world are the exhaustion of fossil fuels and climate change. Microalgae are eukaryotic phototrophs or prokaryotic cyanobacteria (blue green algae) that are able to capture CO₂ and produce lipids suitable for biodiesel, thus can mitigate these challenges. The potential application of microalgae biomass for biofuel production is a clean and sustainable approach to replace fossil fuels. An important consideration for reducing the cost of biofuel is the economical production of algal biomass with high lipid yields. In this study, the marine microalgae Nannochloropsis gaditana were investigated for biomass and lipid production using two …

Magnetic Stimulation On The Growth Of The Microalga Nannochloropsis Oculata, Manuella Oliveira

Electronic Thesis and Dissertation Repository

Fossil fuels, our principal sources of energy supply, are non-renewable and research is needed on alternatives that are renewable and potentially more environmentally friendly. Microalgae have been investigated as a future feedstock alternative to petroleum but the technology is still expensive and improvements are needed. Reduction in costs might be achieved by increasing algal biomass and lipid productivity. The lipids can be used to produce biofuels such as biodiesel and biojet fuel. The marine microalga Nannochloropsis oculata grows well and can accumulate high lipid content. In this study, the effects of static magnetic field stimulation (SMF) of 0 (control), 5, …

Designing And Development Of A Photobioreactor For Optimizing The Growth Of Micro Algae And Studying Its Growth Parameters, Sarmila Katuwal

Electronic Theses and Dissertations

This thesis presents the estimated value of materials required to grow 1g of biomass and the analysis of the light intensity with respect to flow path and flow rate. This thesis aims to design the sparger for a flat plate Photobioreactor, study the flow patterns at different flow rate of air flow and check the performance of flat plate PBR by growing the cyanobacteria. The estimated value to produce 1g of biomass (C_44.6H₇O₂₅N_7.68P_0.9S_0.3) was 0.099g of N, 0.493g of C, 0.160 g of Na, 0.026 g of P, …

Heat Transfer Analysis In A Paddle Reactor For Biomass Fast Pyrolyis, Ankith Ullal

Dissertations, Master's Theses and Master's Reports

Heat transfer analysis was performed on a novel auger reactor for biomass fast pyrolysis. As part of this analysis, correlations for specific heat capacity and heat transfer coefficients for biomass (sawdust) and sand (used as heat transfer medium) were developed. For sand, the heat transfer coefficient followed a power law distribution with reactor fill level and temperature. For raw biomass, the heat transfer coefficient also showed similar dependence on fill level, but was independent of temperature up to 300°C. These correlations were used in a one dimensional heat transfer model developed to calculate the heating time and heating rate of …

Understanding Glycoside Hydrolase Processivity For Improved Biomass Conversion, Suvamay Jana

Theses and Dissertations--Chemical and Materials Engineering

In nature, organisms secrete synergistic enzyme cocktails to deconstruct crystalline polysaccharides, such as cellulose and chitin, to soluble sugars. The cocktails consist of multiple classes of processive and non-processive glycoside hydrolases (GH) that aid in substrate accessibility and reduce product inhibition. Processive GHs attach to chain ends and hydrolyze many glycosidic linkages in sequence to produce disaccharide units before dissociation, and as such, are responsible for the majority of hydrolytic bond cleavages. Accordingly, processive GHs are targets for activity improvements towards efficient and economical biomass conversion. However, the mechanism and factors responsible for processivity are still not understood completely at …

Co-Gasification Of Coal And Biomass Wastes In An Entrained Flow Gasifier: Modelling, Simulation And Integration Opportunities, Dalia A. Ali Eng, Mamdouh A. Gadalla Prof., Omar Y. Abdelaziz, Christian P. Hulteberg, Fatma H. Ashour Prof.

Chemical Engineering

Gasification processes convert carbon-containing material into syngas through chemical reactions in the presence of gasifying agents such as air, oxygen, and steam. Syngas mixtures produced from such processes consist mainly of carbon monoxide (CO), hydrogen (H2), carbon dioxide (CO2), and methane (CH4); this gas can be directly utilised as a fuel to produce electricity or steam. Besides, it is regarded as a basic feedstock within the petrochemical and conventional refining industries, producing various useful products like methanol, hydrogen, ammonia, and acetic acid. In this work, a rigorous process model is developed to simulate the co-gasification of coal-biomass blends through an …