Engineering Commons^™

Evaluation Of Biomass As Bio-Additive In 3d Printing, Shuyang Zhang

Doctoral Dissertations

The petrol-based polymer has been widely applied in current daily life. The end-of-life of polymeric products has drawn environmental concerns. One of the solutions to such issues is to use bio-renewable materials to replace or reduce the use of petrol-based materials. Lignocellulosic materials are one of the potential candidates. Along with the features of 3D printing and the unique properties of biomass, 3D-printed biomass-based materials could be promising in preparing sustainable alternatives.

In this dissertation, lignin and other biomass were applied to various 3D printing techniques for sustainable composites. Stereolithography (SLA) was first used, and the kraft softwood lignin was …

Recycled Printer Filament, Charlotte Hyland, Troy D. Molinar

Williams Honors College, Honors Research Projects

The purpose of this research is to examine the effects of recycling PLA filament for 3D printing on its material properties. After examining these effects, PLA and carbon fiber additives were mixed with recycled PLA pellets in different ratios to attempt to regain material properties lost in the recycling process. To complete these findings, an experiment was design and executed.

The research found that tensile strength during multiple iterations of recycling remained mostly unaffected, however, the strain degraded exponentially. In the PLA additive study, high ratios of PLA additive were able to increase the strength and strain properties of the …

Application Of Sla 3d Printing For Polymers, Taylor Wilson

Williams Honors College, Honors Research Projects

Stereolithography is a type of 3D printing that allows liquid photopolymer resin to be cured into layers that make up a 3D object. Creation of such resins for these purposes can require a significant amount of time to test and develop, and commercial resins also require some amount of testing for printer settings before use. This paper reviews how stereolithography works, the materials used, and experimentation done to compare the resin properties to the determined curing times. Using several commercially available resins, varying base exposure and layer exposure times were used to determine the lowest possible curing time that gave …

Exploring Fused Deposition Modeling (Fdm) Three-Dimensional Printing Tablet Design Options For Pharmaceutical Dosage Forms, Guluzar Gorkem Buyukgoz

Dissertations

This dissertation examines the use of Fused Deposition Modeling (FDM) based three-dimensional (3D) printing approach for developing patient-specific dosage forms and addressing related technical challenges in such drug delivery systems. The first main objective is to explore pharmaceutical tablet design options using novel FDM 3D printing technology as the drug delivery platform such that drug form and tablet properties are tailored by considering patient age-specific formulations and dissolution control. Of the five different design options, two proposed options meet the main objective of providing similar drug release, whereas the popular option of fixed drug concentration but differing tablet size could …

3d Printing Technology Applied In Lithium Metal Batteries: From Liquid To Solid., Xuejie Gao

Electronic Thesis and Dissertation Repository

Li-metal batteries are strongly considered to be one of the most promising candidates for high energy density energy storage devices in our modern society. However, the state-of-the-art Limetal batteries are still limited by several challenges including 1) low energy/power density; 2) Li dendrite growth; 3) low coulombic efficiency, and 4) safety concerns within the liquid electrolyte. This thesis mainly focuses on addressing these challenges by using a 3D printing technique to realize high energy/power density Li-metal batteries.

A self-standing high areal energy density cathode for Li-S battery was developed by the 3D printing method in the first part. The optimized …

Quantifying Mafenide Release From 3d Printed Phenylalanine-Coumarin Copolyester Scaffolds, Jacob Seeh

Williams Honors College, Honors Research Projects

This project addressed burn wound healing through controlled release of the antibacterial drug mafenide encapsulated by a copolyster into 3D printed scaffolds. Scaffolds were printed at 25^oC and 0.77-1 bar in a cross-hatch pattern with uniform thickness, distance between parallel layers, and diameter then photo-crosslinked. The number of scaffolds available for testing was limited by the amount of polymer that could be synthesized. A high-performance liquid chromatography method was developed specifically for this experiment and used to determine daily release of mafenide from the scaffold into a 2-mL phosphate buffer solution. During the first 24 hours a large …

Development Of Novel Inks And Approaches For Printing Tissues And Organs, Shen Ji

Dissertations

Tissue engineering is a multidisciplinary field that investigates and develops new methods to repair, regenerate and replace damaged tissues and organs, or to develop biomaterial platforms as in vitro models. Tissue engineering approaches require the fabrication of scaffolds using biomaterials or fabrication of living tissues using cells. As the demands of customized, implantable tissue/organs are increasing and becoming more urgent, conventional scaffold fabrication approaches are difficult to meet the requirements, especially for complex large-scale tissue fabrication. In this regard, three-dimensional (3D) printing attracted more interest over the past decades due to its unrivaled ability to fabricate highly customized tissues or …

Enabling 3d Printing Technologies For Artificial Compound Eye System And Penetrating Neural Probes, Boshen Zhang

Wayne State University Dissertations

3D printing has become a useful and transformative method and has applications in many different fields, including organ printing, aerospace applications, and medical devices. With higher resolution, faster production speed, and more design flexibility, 3D printing technologies can lead to more novel devices and systems. In this research, two new techniques have been developed to enable 3D printing technologies for artificial compound eye system and penetrating glassy carbon neural electrode array.

This work focuses on developing new applications based on the SLA 3D printing process, which uses the liquid resin to create a solid 3D structure. The limitation of SLA …

Reaction Profiling Of Extracellular Protein Phosphorylation Through A Microfluidic Reactor Coupled With Raman Spectroscopy, Abigail Casey

Theses and Dissertations

Diseases and disorders in the human body are considered abnormalities of proper cellular function. Understanding the signal transduction mechanisms that cause these abnormalities is crucial to developing earlier detection methods, better treatment options and effective cures. While current diagnostic procedures are powerful tools in diagnosing diseases, they are ineffective in informing physicians on the real-time behavior of the signal transduction mechanisms associated with diseases and disorders. Currently, disease progression is monitored over time through routine patient visits and testing by one or more of the above techniques. By developing an approach that can monitor structural and conformational changes of proteins …

Spray-Dried Cellulose Nanofibril-Reinforced Polypropylene Composites For Extrusion-Based Additive Manufacturing, Lu Wang

Electronic Theses and Dissertations

Compared to conventional manufacturing process, additive manufacturing (AM) offers free-form design, lighter and more ergonomic products, short lead time and less waste. Extrusion-based AM can be used to print thermoplastics. However, extrusion-based AM has processing challenges in printing semi-crystalline thermoplastics, for instance, polypropylene (PP). Cellulose nanofibrils (CNF) are one type of cellulose nanofibers that are produced from pulp fibers. CNF has extraordinary properties which make it an ideal candidate to reinforce polymers. Spray-dried CNF (SDCNF) is able to be incorporated into thermoplastic matrices without modifying conventional processing procedures.

The mechanical properties of 3D printed plastic parts have been considered significantly …

3d Printed Bone Supplement Materials, Azem Khalifa Yahamed

Dissertations

Three-dimensional (3D) printing is an advanced rapid technology that can be used to make human bone substitutes with exact shape and designed structures, based on models created from actual individual bone medical Digital Imaging and Communications in Medicine (DICOM) images. Biocompatible polymers have been selected for 3D printing of human bone structures. The thermoplastics were 3D printed with Fused Deposition Modeling (FDM) are Acrylate Butadiene Styrene (ABS), Polylactic Acid (PLA) and ULTEM 9085 (a polyetherimide). The polyamide PA 2200 was 3D printed using Selective Laser Sintering (SLS). Digital ABS (a crosslinked acrylic polymer) was 3D printed using PolyJet Technology. These …