Open Access. Powered by Scholars. Published by Universities.®
- Publication
- Publication Type
Articles 1 - 9 of 9
Full-Text Articles in Engineering
Seeding Effects Of Submicron Caal-No3 Ldh Particles On The Hydration And Properties Of Portland Cement And Sulfoaluminate Cement Pastes, Sukanta K. Mondal, Monday Uchenna Okoronkwo
Seeding Effects Of Submicron Caal-No3 Ldh Particles On The Hydration And Properties Of Portland Cement And Sulfoaluminate Cement Pastes, Sukanta K. Mondal, Monday Uchenna Okoronkwo
Chemical and Biochemical Engineering Faculty Research & Creative Works
Layered Double Hydroxide (LDH) Is Reported To Improve The Durability Of Concretes, Primarily Due To Its Ability To Exchange Anionic Species, Including Chloride, Which Is Implicated In Corrosion-Driven Durability Issues. However, There Is No Comprehensive Study Investigating The Effect Of LDH On The Properties Of Different Cement Systems At Both Early And Mature Ages. In This Study, The Early Age And Mature Age Properties Of Portland Cement (OPC) And Calcium Sulfoaluminate (CSA) Cement Pastes Seeded With Submicron-Sized Calcium Aluminum-NO3 LDH (CaAl-NO3 LDH) Were Investigated. The Effects Of The 1–5%mass Dosage Of LDH On The Hydration Of Both Cement Systems Were …
The Comprehensive Study Of High Viscosity Friction Reducers In High-Tds And High-Temperature Environments, Xiaojing Ge
The Comprehensive Study Of High Viscosity Friction Reducers In High-Tds And High-Temperature Environments, Xiaojing Ge
Doctoral Dissertations
"High viscosity friction reducers (HVFRs) have been recently gaining more attention and increasing in use, not only as friction-reducing agents but also as proppant carriers. Reusing of produced water has also been driven by both environmental and economic benefits. Currently, most friction reducers on the market are anionic friction reducers, which are fully compatible with most produced water with low to medium level of Total Dissolved Solids (TDS) but show a significant drop at high TDS conditions in term of their friction reduction performance in most cases. On the contrary, cationic friction reducers are believed to have better TDS tolerance …
Effect Of Class C And Class F Fly Ash On Early-Age And Mature-Age Properties Of Calcium Sulfoaluminate Cement Paste, Sukanta K. Mondal, Carrie Clinton, Hongyan Ma, Aditya Kumar, Monday Uchenna Okoronkwo
Effect Of Class C And Class F Fly Ash On Early-Age And Mature-Age Properties Of Calcium Sulfoaluminate Cement Paste, Sukanta K. Mondal, Carrie Clinton, Hongyan Ma, Aditya Kumar, Monday Uchenna Okoronkwo
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
To Promote the Sustainable Development of Eco-Efficient Calcium Sulfoaluminate (CSA) Cements through the Partial Replacement of the CSA Clinker with Supplementary Cementitious Waste Products, the Effects of Coal Fly Ashes on the Early-Age and Mature-Age Properties of a Calcium Sulfoaluminate (CSA)-Based Cement Paste Were Investigated. the Impacts of Both Class C and Class F Fly Ashes on the Rheological Properties, Hydration Kinetics, and Compressive Strength Development of CSA Cement Paste Were Studied. Rheology-Based Workability Parameters, Representing the Rate of Loss of Flowability, the Rate of Hardening, and the Placement Limit, Were Characterized for the Pastes Prepared with Fixed Water-To-Cement (W/c) …
Quantifying The Workability Of Calcium Sulfoaluminate Cement Paste Using Time-Dependent Rheology, Sukanta K. Mondal, Adam Welz, Carrie Clinton, Kamal Khayat, Aditya Kumar, Monday Uchenna Okoronkwo
Quantifying The Workability Of Calcium Sulfoaluminate Cement Paste Using Time-Dependent Rheology, Sukanta K. Mondal, Adam Welz, Carrie Clinton, Kamal Khayat, Aditya Kumar, Monday Uchenna Okoronkwo
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Poor workability is a common feature of calcium sulfoaluminate (CSA) cement paste. Multiple chemical admixtures, such as set retarders and dispersants, are frequently employed to improve the workability and delay the setting of CSA cement paste. A quantitative assessment of the compatibility, efficiency, and the effects of the admixtures on cement paste workability is critical for the design of an appropriate paste formulation and admixture proportioning. Very limited studies are available on the quantitative rheology-based method for evaluating the workability of calcium sulfoaluminate cement pastes. This study presents a novel and robust time-dependent rheological method for quantifying the workability of …
A Novel Numerical Model Of Gelant Inaccessible Pore Volume For In Situ Gel Treatment, Jianqiao Leng, Xindi Sun, Mingzhen Wei, Baojun Bai
A Novel Numerical Model Of Gelant Inaccessible Pore Volume For In Situ Gel Treatment, Jianqiao Leng, Xindi Sun, Mingzhen Wei, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Inaccessible pore volume (IAPV) can have an important impact on the placement of gelant during in situ gel treatment for conformance control. Previously, IAPV was considered to be a constant factor in simulators, yet it lacked dynamic characterization. This paper proposes a numerical simulation model of IAPV. The model was derived based on the theoretical hydrodynamic model of gelant molecules. The model considers both static features, such as gelant and formation properties, and dynamic features, such as gelant rheology and retention. To validate our model, we collected IAPV from 64 experiments and the results showed that our model fit moderately …
A Novel Numerical Model Of Gelant Inaccessible Pore Volume For In Situ Gel Treatment, Jianqiao Leng, Xindi Sun, Mingzhen Wei, Baojun Bai
A Novel Numerical Model Of Gelant Inaccessible Pore Volume For In Situ Gel Treatment, Jianqiao Leng, Xindi Sun, Mingzhen Wei, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Inaccessible pore volume (IAPV) can have an important impact on the placement of gelant during in situ gel treatment for conformance control. Previously, IAPV was considered to be a constant factor in simulators, yet it lacked dynamic characterization. This paper proposes a numerical simulation model of IAPV. The model was derived based on the theoretical hydrodynamic model of gelant molecules. The model considers both static features, such as gelant and formation properties, and dynamic features, such as gelant rheology and retention. To validate our model, we collected IAPV from 64 experiments and the results showed that our model fit moderately …
Sealant Injectivity Through Void Space Conduits To Assess Remediation Of Well Cement Failure, Mohammed Alkhamis, Abdulmohsin Imqam
Sealant Injectivity Through Void Space Conduits To Assess Remediation Of Well Cement Failure, Mohammed Alkhamis, Abdulmohsin Imqam
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The primary cement of oil and gas wells is prone to fail under downhole conditions. Thus, a remedial operation must be conducted to restore the wellbore integrity and provides zonal isolation. Many types of materials are currently used and/or have the potential to be employed in wellbore integrity applications, including, but not limited to, conventional Portland cement, microfine and ultrafine cement, thermoset materials, and thermoplastic materials. In this study, several types of materials were selected for evaluation: (1) conventional Portland cement, which is the most widely used in remedial operations in the petroleum industry, (2) polymer resin, which is one …
Wetting Kinetics In Forced Spreading, Amer Mohammad Al-Shareef
Wetting Kinetics In Forced Spreading, Amer Mohammad Al-Shareef
Doctoral Dissertations
"Under dynamic conditions, the dynamic contact angle (the angle that the liquid makes with the solid) of a liquid on a solid surface varies dramatically with substrate velocity from its equilibrium value. Experimental data of the dynamic contact angles for polydimethylsiloxane (PDMS or silicone oil) under air on a glass substrate coated with teflon, for water under PDMS, for solutions of the polymer polyethylene oxide (PEO) under air, for solutions of PEO under PDMS, were obtained to simulate and understand the systems of brine or brine containing a polymer displacing viscous crude. A variety of solid substrates were used other …
Stochastic Simulation Of Entangled Polymeric Liquids In Fast Flows: Microstructure Modification, Joontaek Park, David W. Mead, Morton M. Denn
Stochastic Simulation Of Entangled Polymeric Liquids In Fast Flows: Microstructure Modification, Joontaek Park, David W. Mead, Morton M. Denn
Chemical and Biochemical Engineering Faculty Research & Creative Works
We have modified the full-chain stochastic tube (XDS) model developed by Xu et al. [J. Rheol. 50, 477-494 (2006)] to simulate the rheology of entangled melts and solutions of linear monodisperse polymers. The XDS model, which has a single adjustable parameter that is equivalent to the Rouse time, successfully describes steady and transient shear and normal stress data at low to moderate rates, but the results deviate systematically from experimental data at high rates. The algorithm for re-entanglement was revised, and a configuration- dependent friction coefficient (CDFC), as originally proposed by Giesekus, was incorporated to account for microstructural change of …