Engineering Commons^™

Development Of A Semi-Automated Tobacco Stripping Machine Utilizing String Trimmers, Robert George Sperry, John H. Wilhoit, George A. Duncan

Biosystems and Agricultural Engineering Faculty Publications

Conventional stripping of burley tobacco is labor intensive and typically requires 50 to 75 worker hours per acre (wkr•h/acre). The goal of the project was to reduce labor by optimizing leaf removal by string trimmer heads using combinations of strings lengths and motor speeds. In tests conducted on a single grade, all leaves outside the grade were removed by hand. Plants were run through the machine for string lengths of 13, 18, and 23 cm (5, 7, and 9 in.) and associated motor speeds which were monitored and recorded. Stripping efficiencies were calculated for each plant and collectively for each …

2013-2014 Kentucky & Tennessee Tobacco Production Guide, Kenneth W. Seebold, Robert C. Pearce, William A. Bailey, Lowell P. Bush, Jonathan D. Green, Robert D. Miller, Laura A. Powers, William M. Snell, Lee H. Townsend, Mark Purschwitz, Larry G. Wells, John H. Wilhoit, Margarita Velandia, Steve Bost, Gene Burgess, Frank Hale, Darrell Hensley, Paul Denton, Neil Rhodes

Agriculture and Natural Resources Publications

Tobacco growers in Kentucky and Tennessee have faced many challenges during the past two years, including weather, labor availability, and rising production costs. However, there have been opportunities as well. Some buying stations have closed or moved, but new buyers have come into the market and contract volumes have been stable overall. Good quality burley tobacco is in relatively short supply, and this has offered opportunities to those who have been able to overcome weather and labor challenges and produce good crops. These changes have had different impacts in different regions of both states, based largely on where buying stations …

Moveable Tobacco Curing Frames, George A. Duncan, Larry D. Swetnam, Linus R. Walton

Agricultural Engineering Extension Publications

Moveable (or portable) curing frames offer the tobacco grower another option for successfully reducing labor and costs for producing air-cured tobacco. Reducing labor and costs is essential to continuing profitable tobacco production.

Two designs that use the cantilever-beam concept for supporting two rails of stick tobacco on a central beam are shown and explained in this publication. Further details of construction and covering are shown in the following drawings.

Selecting An Air-Cure Tobacco Housing And Curing Facility, George A. Duncan, Larry D. Swetnam

Agricultural Engineering Extension Publications

Once or twice in a lifetime the average tobacco producer faces the decision of what tobacco housing and curing facility he needs to build. For some, this may be to replace a barn that has burned or blown down. For others, the need may arise from an expansion of production by farm acquisition or lease-in of extra poundage.

In all cases, it is important to build the most suitable facility for present and projected production methods. With labor becoming more costly and scarce, labor-saving features are a must Rising material and construction costs continue to increase the initial investment costs …

Post-Tier Rail And Typar® Or Metal-Covered Tobacco Field Curing Structures, George A. Duncan

Agricultural Engineering Extension Publications

Tobacco producers are rapidly adopting field curing structures with several variations in construction materials and methods. They are looking to lower costs and increase efficiency by installing structures that require less maintenance and last longer.

Two recently designed structures appear to provide more permanent options for producers who dislike the tedious tasks of covering and securing the plastic over the tobacco during the curing season. Both structures use two-rail-wide, two-post wooden construction, but they differ in their roof coverings. One uses Typar®, and the other uses metal.

High-Tensile Wire Or Cable Tobacco Field Curing Structure, George A. Duncan

Agricultural Engineering Extension Publications

Producers are rapidly adopting field curing structures, and several variations in construction methods and materials exist to achieve low cost or low maintenance and long life. One of the construction methods, pioneered by a producer and now being used by others in the state, uses high-tensile wire strands or cable to support the tobacco sticks.

Ventilation System Design Parameters For Greenhouses For Tobacco Production, R. S. Gates, George A. Duncan

Agricultural Engineering Extension Updates

Methods for germination and initial growth of tobacco have changed rapidly in recent years, moving from outside float beds into double-layer plastic greenhouses. Typically, these "tobacco greenhouses" consist of sidewall curtains, which run the entire length of both sides of the house. They may also have modest mechanical ventilation.

Ventilation of greenhouse structures is a mature field, with engineering practices for proper design given by numerous organizations including ASAE. In this article we briefly outline the important features of ventilation of concern to tobacco greenhouse operators.

Two-Tier Partially Enclosed Air-Cure Tobacco Barn, George A. Duncan

Agricultural Engineering Extension Publications

With the rising costs, scarcity of materials, and greater construction requirements for regular tobacco barns, the concept of a lower cost but functionally sound tobacco curing facility with partial or no sidewall closure has been developed into a blueprint plan shown in Figure 1. The plan can be built and used now with partial sidewalls and enclosed more completely later if desired.

One-Tier Plastic-Covered Tobacco Curing Structure—Tier Rail Design, George A. Duncan

Agricultural Engineering Extension Publications

A tobacco grower occasionally has insufficient barn space to house his crop. This problem is especially severe when a barn is damaged or destroyed and cannot be repaired or replaced before harvest. Also, those leasing or having extra poundage may need short-term, low-cost housing.

Kentucky weather conditions are suited for curing in conventional barns as well as in other special structures with adequate covering and crop protection.

Method And Apparatus For Harvesting Tobacco, George A. Duncan

Biosystems and Agricultural Engineering Faculty Patents

A support beam is formed of two wooden members held in spaced relation to each other by spaced blocks to provide openings to receive tobacco sticks with tobacco stalks thereon. Each end of the support beam has a longitudinal slot extending therethrough to enable a cable, which is attached to a rafter in the upper end of the barn, to extend therethrough. The lower end of each cable has a loop for attachment to a drum of a hoist mechanism, which has a portion bearing against the bottom surface of the support beam. The support beam has a depending projection …

Tobacco Plant Harvester, James H. Casada, Edward M. Smith

Biosystems and Agricultural Engineering Faculty Patents

A harvester for tobacco plants is provided for towing by a prime mover to which an articulated frame is attached, the frame mounting a movable turret having spears on which tobacco stalks are impaled. During removal of the stalks from the spears, they are loaded on sticks which are then manually removed from the harvester.

A hydraulic system powered from the prime mover serves to actuate each of the turrets, an empty stick supplying mechanism, a loaded stick removing mechanism, and the mechanism for transferring stalks from the spears to the sticks; and a mechanical power takeoff shaft driven by …