Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 24 of 24

Full-Text Articles in Engineering

The Role Of Transient Vibration Of The Skull On Concussion, Rodrigo Dalvit Carvalho Da Silva Mar 2022

The Role Of Transient Vibration Of The Skull On Concussion, Rodrigo Dalvit Carvalho Da Silva

Electronic Thesis and Dissertation Repository

Concussion is a traumatic brain injury usually caused by a direct or indirect blow to the head that affects brain function. The maximum mechanical impedance of the brain tissue occurs at 450±50 Hz and may be affected by the skull resonant frequencies. After an impact to the head, vibration resonance of the skull damages the underlying cortex. The skull deforms and vibrates, like a bell for 3 to 5 milliseconds, bruising the cortex. Furthermore, the deceleration forces the frontal and temporal cortex against the skull, eliminating a layer of cerebrospinal fluid. When the skull vibrates, the force spreads directly to …


Characterizing The Internal Porous Structure Of Equine Proximal Sesamoid Bones Subjected To Race Training Using Fast Fourier Transforms, Joseph Erik Davis Jan 2022

Characterizing The Internal Porous Structure Of Equine Proximal Sesamoid Bones Subjected To Race Training Using Fast Fourier Transforms, Joseph Erik Davis

Theses and Dissertations--Biomedical Engineering

The equine racing industry is one of the main proponents in Kentucky’s economic infrastructure. In this industry there has come a need to investigate the nature of the proximal sesamoid bone (PSB). Breakdowns involving the PSBs are the leading cause in racehorse deaths in the industry, with still little known about what causes this bone to fracture. This study seeks to shed insight by investigating the internal structure of the PSB. Using microCT scanning, the internal porous structure was captured. From there, noticeable differences in the pores were noticed and quantified using fast Fourier transform (FFT) analysis.

The dominant peak …


Pneumonia Radiograph Diagnosis Utilizing Deep Learning Network, Wesley O'Quinn Mar 2021

Pneumonia Radiograph Diagnosis Utilizing Deep Learning Network, Wesley O'Quinn

Honors College Theses

Pneumonia is a life-threatening respiratory disease caused by bacterial infection. The goal of this study is to develop an algorithm using Convolutional Neural Networks (CNNs) to detect visual signals for pneumonia in medical images and make a diagnosis. Although Pneumonia is prevalent, detection and diagnosis are challenging. The deep learning network AlexNet was utilized through transfer learning. A dataset consisting of 11,318 images was used for training, and a preliminary diagnosis accuracy of 72% was achieved.


Approaches To Studying Bacterial Biofilms In The Bioeconomy With Nanofabrication Techniques And Engineered Platforms., Michelle Caroline Halsted Dec 2020

Approaches To Studying Bacterial Biofilms In The Bioeconomy With Nanofabrication Techniques And Engineered Platforms., Michelle Caroline Halsted

Doctoral Dissertations

Studies that estimate more than 90% of bacteria subsist in a biofilm state to survive environmental stressors. These biofilms persist on man-made and natural surfaces, and examples of the rich biofilm diversity extends from the roots of bioenergy crops to electroactive biofilms in bioelectrochemical reactors. Efforts to optimize microbial systems in the bioeconomy will benefit from an improved fundamental understanding of bacterial biofilms. An understanding of these microbial systems shows promise to increase crop yields with precision agriculture (e.g. biosynthetic fertilizer, microbial pesticides, and soil remediation) and increase commodity production yields in bioreactors. Yet conventional laboratory methods investigate these micron-scale …


The Of Application Of 3d-Printing To Lumbar Spine Surgery, Andrew J. Kanawati Apr 2020

The Of Application Of 3d-Printing To Lumbar Spine Surgery, Andrew J. Kanawati

Electronic Thesis and Dissertation Repository

Rapid prototyping refers to the manufacturing process in which a three-dimensional (3D) digital model can be transformed into a physical model by layering material in the shape of successive cross sections atop of previously layers. Rapid prototyping has been increasing in popularity in the field of medicine and surgery due to the ability to personalize various aspects of patient care. The thesis will explore the use of rapid prototyping in lumbar spine surgery, aim to quantify the accuracy of medical imaging when relating to imaged structures and their corresponding models produced by rapid prototyping, and determine if complex patient-specific guides …


Mhealth Elisa System For Point-Of-Care, Arsenii Zhdanov Jul 2019

Mhealth Elisa System For Point-Of-Care, Arsenii Zhdanov

USF Tampa Graduate Theses and Dissertations

Enzyme-linked immunosorbent assay (ELISA) is one of the most important technologies for biochemical analysis critical for diagnosis and monitoring of many diseases. Traditional systems for ELISA incubation and reading are expensive and bulky, thus cannot be used at pointof- care or in the field. Here, we design and demonstrate a new miniature mobile phone based system for ELISA. This mHealth system can be used to complete all steps of the assay, including incubation and reading. It can be fabricated at low cost, portable, and can transfer test results via mobile phone. We have designed the sample dispensing system, incubation chamber, …


Development Of Image-Based Surgical Planning Software For Bone-Conduction Implants, Carlos D. Salgado Aug 2018

Development Of Image-Based Surgical Planning Software For Bone-Conduction Implants, Carlos D. Salgado

Electronic Thesis and Dissertation Repository

The BONEBRIDGE bone-conduction device is used to treat conductive and mixed hearing losses. The size of its floating mass transducer (FMT) can preclude implantation in certain anatomies, necessitating comprehensive surgical planning. Current techniques are time consuming and difficult to transfer to the operating room. The objective of this thesis was to develop software for calculating skull thickness to the dura mater to find locations for the FMT and to the first air cells which guarantee sufficient bone for the implant screws to grasp. Temporal bone computed tomography (CT) images were segmented and processed and custom Matlab code was written to …


Automated Microscopy Platform For High-Throughput Analysis Of Cellular Characteristics, Hussam Ibrahim Jul 2016

Automated Microscopy Platform For High-Throughput Analysis Of Cellular Characteristics, Hussam Ibrahim

Physics: Student Scholarship & Creative Works

Existing microscopy platforms allow analysis post-hoc, but not in real time. This is an issue in the world of Bioengineering because you are limited to performing further analysis on specimen. The aim of my research was to design a sophisticated system whereby information can be exchanged between the software which acquires images and software that analyzes the images immediately after acquisition. In this system, images would be acquired by the microscope and analyzed by customized scripts (MATLAB, Mathworks) in real time. Specifically, MATLAB would wait for new images to be saved on the hard drive, import these images, and perform …


Noninvasive Assessment Of Photoreceptor Structure And Function In The Human Retina, Robert Francis Cooper Oct 2015

Noninvasive Assessment Of Photoreceptor Structure And Function In The Human Retina, Robert Francis Cooper

Dissertations (1934 -)

The human photoreceptor mosaic underlies the first steps of vision; thus, even subtle defects in the mosaic can result in severe vision loss. The retina can be examined directly using clinical tools; however these devices lack the resolution necessary to visualize the photoreceptor mosaic. The primary limiting factor of these devices is the optical aberrations of the human eye. These aberrations are surmountable with the incorporation of adaptive optics (AO) to ophthalmoscopes, enabling imaging of the photoreceptor mosaic with cellular resolution. Despite the potential of AO imaging, much work remains before this technology can be translated to the clinic. Metrics …


3d Thoracoscopic Ultrasound Volume Measurement Validation In An Ex Vivo And In Vivo Porcine Model Of Lung Tumours, V. Hornblower, E. Yu, A. Fenster, J. Battista, R. Malthaner Jul 2015

3d Thoracoscopic Ultrasound Volume Measurement Validation In An Ex Vivo And In Vivo Porcine Model Of Lung Tumours, V. Hornblower, E. Yu, A. Fenster, J. Battista, R. Malthaner

Richard A. Malthaner

The purpose of this study was to validate the accuracy and reliability of volume measurements obtained using three-dimensional (3D) thoracoscopic ultrasound (US) imaging. Artificial "tumours" were created by injecting a liquid agar mixture into spherical moulds of known volume. Once solidified, the "tumours" were implanted into the lung tissue in both a porcine lung sample ex vivo and a surgical porcine model in vivo. 3D US images were created by mechanically rotating the thoracoscopic ultrasound probe about its long axis while the transducer was maintained in close contact with the tissue. Volume measurements were made by one observer using the …


3d Thoracoscopic Ultrasound Volume Measurement Validation In An Ex Vivo And In Vivo Porcine Model Of Lung Tumours, V. Hornblower, E. Yu, A. Fenster, J. Battista, R. Malthaner Jul 2015

3d Thoracoscopic Ultrasound Volume Measurement Validation In An Ex Vivo And In Vivo Porcine Model Of Lung Tumours, V. Hornblower, E. Yu, A. Fenster, J. Battista, R. Malthaner

Richard A. Malthaner

The purpose of this study was to validate the accuracy and reliability of volume measurements obtained using three-dimensional (3D) thoracoscopic ultrasound (US) imaging. Artificial "tumours" were created by injecting a liquid agar mixture into spherical moulds of known volume. Once solidified, the "tumours" were implanted into the lung tissue in both a porcine lung sample ex vivo and a surgical porcine model in vivo. 3D US images were created by mechanically rotating the thoracoscopic ultrasound probe about its long axis while the transducer was maintained in close contact with the tissue. Volume measurements were made by one observer using the …


Hyperspectral Tomographic Ftir Imaging Using Two Illumination Geometries For Polymer Phantoms, Zahrasadat Alavi May 2015

Hyperspectral Tomographic Ftir Imaging Using Two Illumination Geometries For Polymer Phantoms, Zahrasadat Alavi

Theses and Dissertations

The purpose of this dissertation is to carry out non-destructive 3D imaging by applying Fourier Transform Infrared (FTIR) spectro-microtomographic techniques, and develop corresponding methods of data analysis. This is done by collecting 3D synchrotron-based and lab-based (Thermal) FTIR hyper spectral data at the Synchrotron Radiation Center (SRC) for the first time. Despite other 2D imaging techniques, this does not manipulate the sample, and suppresses the need to microtome 3D biological, material or biomedical samples into slices to study by spectroscopic imaging techniques. Spectro-micro-tomography is applicable for scientific, industrial, energy, biomedical samples such as stem cell characterization and materials such as …


Development Of A Cell Morphological Analysis Tool To Evaluate The Ultrasound Vibrational Effects On Cell Adhesion, Joseph M. Smith Jan 2015

Development Of A Cell Morphological Analysis Tool To Evaluate The Ultrasound Vibrational Effects On Cell Adhesion, Joseph M. Smith

Dissertations, Master's Theses and Master's Reports - Open

Fibroblast encapsulation is a stage of the wound healing process in which the implanted device is separated from the biological environment due to the formation of fibrotic tissue. Uncontrolled adhesion of fibroblasts, called fibrosis, has the ability to inhibit an implanted device’s functionality over its lifetime. Over time, fibroblasts have been shown to cause loosening and failure of bone-anchor implants which could include the possibility of harming the patient. The encapsulating process could also hinder the sensitivity of implanted biosensors operating in the body for continuous monitoring. Unfortunately, the antifouling surfaces which are commonly used on implanted devices to control …


In Vivo Mri Signatures Of Hippocampal Subfield Pathology In Intractable Epilepsy., Maged Goubran, Boris C Bernhardt, Diego Cantor-Rivera, Jonathan C Lau, Charlotte Blinston, Robert R Hammond, Sandrine De Ribaupierre, Jorge G Burneo, Seyed M Mirsattari, David A Steven, Andrew G Parrent, Andrea Bernasconi, Neda Bernasconi, Terry M Peters, Ali R Khan Jan 2015

In Vivo Mri Signatures Of Hippocampal Subfield Pathology In Intractable Epilepsy., Maged Goubran, Boris C Bernhardt, Diego Cantor-Rivera, Jonathan C Lau, Charlotte Blinston, Robert R Hammond, Sandrine De Ribaupierre, Jorge G Burneo, Seyed M Mirsattari, David A Steven, Andrew G Parrent, Andrea Bernasconi, Neda Bernasconi, Terry M Peters, Ali R Khan

Robarts Imaging Publications

OBJECTIVES: Our aim is to assess the subfield-specific histopathological correlates of hippocampal volume and intensity changes (T1, T2) as well as diff!usion MRI markers in TLE, and investigate the efficacy of quantitative MRI measures in predicting histopathology in vivo.

EXPERIMENTAL DESIGN: We correlated in vivo volumetry, T2 signal, quantitative T1 mapping, as well as diffusion MRI parameters with histological features of hippocampal sclerosis in a subfield-specific manner. We made use of on an advanced co-registration pipeline that provided a seamless integration of preoperative 3 T MRI with postoperative histopathological data, on which metrics of cell loss and gliosis were quantitatively …


Quantitative Relaxometry And Diffusion Mri For Lateralization In Mts And Non-Mts Temporal Lobe Epilepsy., Ali R Khan, Maged Goubran, Sandrine De Ribaupierre, Robert R Hammond, Jorge G Burneo, Andrew G Parrent, Terry M Peters Mar 2014

Quantitative Relaxometry And Diffusion Mri For Lateralization In Mts And Non-Mts Temporal Lobe Epilepsy., Ali R Khan, Maged Goubran, Sandrine De Ribaupierre, Robert R Hammond, Jorge G Burneo, Andrew G Parrent, Terry M Peters

Robarts Imaging Publications

We developed novel methodology for investigating the use of quantitative relaxometry (T1 and T2) and diffusion tensor imaging (DTI) for lateralization in temporal lobe epilepsy. Patients with mesial temporal sclerosis confirmed by pathology (N=8) and non-MTS unilateral temporal lobe epilepsy (N=6) were compared against healthy controls (N=19) using voxel-based analysis restricted to the anterior temporal lobes, and laterality indices for each MRI metric (T1, T2, fractional anisotropy (FA), mean diffusivity, axial and radial diffusivities) were computed based on the proportion of significant voxels on each side. The diffusivity metrics were the most lateralizing MRI metrics in MTS and non-MTS subsets, …


Stationary Wavelet Transform For Under-Sampled Mri Reconstruction., Mohammad H Kayvanrad, A Jonathan Mcleod, John S H Baxter, Charles A Mckenzie, Terry M Peters Jan 2014

Stationary Wavelet Transform For Under-Sampled Mri Reconstruction., Mohammad H Kayvanrad, A Jonathan Mcleod, John S H Baxter, Charles A Mckenzie, Terry M Peters

Robarts Imaging Publications

In addition to coil sensitivity data (parallel imaging), sparsity constraints are often used as an additional lp-penalty for under-sampled MRI reconstruction (compressed sensing). Penalizing the traditional decimated wavelet transform (DWT) coefficients, however, results in visual pseudo-Gibbs artifacts, some of which are attributed to the lack of translation invariance of the wavelet basis. We show that these artifacts can be greatly reduced by penalizing the translation-invariant stationary wavelet transform (SWT) coefficients. This holds with various additional reconstruction constraints, including coil sensitivity profiles and total variation. Additionally, SWT reconstructions result in lower error values and faster convergence compared to DWT. These concepts …


Automated Point-Of-Care Image Processing Methodology For The Diagnosis Of Malaria, Michael B. Jorgensen Jan 2013

Automated Point-Of-Care Image Processing Methodology For The Diagnosis Of Malaria, Michael B. Jorgensen

Master's Theses

Malaria has profoundly influenced human history for over four thousand years and despite numerous attempts at eradication, the prevention, diagnosis, and treatment of malaria have been largely ineffective. More than five hundred million people are affected by malaria every year resulting in over one million deaths. Drug resistance development by the parasite has diminished the effectiveness of numerous treatment options due, in part, to overtreatment of negative patients based on insufficient clinical algorithms and diagnostic methods. The goal of this research was to develop an image analysis algorithm to diagnose malaria with a high degree of sensitivity and specificity in …


An Investigation Of Thermal Imaging To Detect Physiological Indicators Of Stress In Humans, Carl Brady Cross Jan 2013

An Investigation Of Thermal Imaging To Detect Physiological Indicators Of Stress In Humans, Carl Brady Cross

Browse all Theses and Dissertations

Real-time, stand-off sensing of humans to detect emotional state would be valuable in many defense, security and medical scenarios. Using a multimodal sensor platform that incorporates high-resolution visible-wavelength and mid-wave infrared cameras and a millimeter-wave (mmW) radar system, the detection of physiological indicators of psychological stress is tested through laboratory experiments. Our approach focuses on thermal imaging to measure temperature patterns in distinct facial regions representative of underlying hemodynamic patterns. Experiments were designed to: 1) determine the ability of thermal imaging to detect high levels of psychological stress and assess responses to physical versus psychological stressors; 2) evaluate the fidelity …


Towards Omni-Tomography -- Grand Fusion Of Multiple Modalities For Simultaneous Interior Tomography, Ge Wang, Jie Zhang, Hao Gao, Victor Weir, Hengyong Yu, Wenxiang Cong, Xiaochen Xu, Haiou Shen, James Bennett, Mark Furth, Yue Wang, Michael Vannier Jun 2012

Towards Omni-Tomography -- Grand Fusion Of Multiple Modalities For Simultaneous Interior Tomography, Ge Wang, Jie Zhang, Hao Gao, Victor Weir, Hengyong Yu, Wenxiang Cong, Xiaochen Xu, Haiou Shen, James Bennett, Mark Furth, Yue Wang, Michael Vannier

Radiology Faculty Publications

We recently elevated interior tomography from its origin in computed tomography (CT) to a general tomographic principle, and proved its validity for other tomographic modalities including SPECT, MRI, and others. Here we propose "omni-tomography", a novel concept for the grand fusion of multiple tomographic modalities for simultaneous data acquisition in a region of interest (ROI). Omni-tomography can be instrumental when physiological processes under investigation are multi-dimensional, multi-scale, multi-temporal and multi-parametric. Both preclinical and clinical studies now depend on in vivo tomography, often requiring separate evaluations by different imaging modalities. Over the past decade, two approaches have been used for multimodality …


Studying Milk Coagulation Kinetics With Laser Scanning Confocal Microscopy, Image Processing, And Computational Modeling, Richard Joseph Hennessy Jun 2011

Studying Milk Coagulation Kinetics With Laser Scanning Confocal Microscopy, Image Processing, And Computational Modeling, Richard Joseph Hennessy

Master's Theses

The kinetics of milk coagulation are complex and still not well understood. A deeper understanding of coagulation and the impact of the relevant factors would aid in both cheese manufacturing and also in determining the nutritional benefits of dairy products. A method using confocal microscopy was developed to follow the movement of milk fat globules and the formation of a milk protein network during the enzyme-induced coagulation of milk. Image processing methods were then used to quantify the rate of coagulation. It was found that the texture of the protein network is an indicator of the current status of the …


Fusion And Visualization Of Intraoperative Cortical Images With Preoperative Models For Epilepsy Surgical Planning And Guidance., A Wang, S M Mirsattari, A G Parrent, T M Peters Jan 2011

Fusion And Visualization Of Intraoperative Cortical Images With Preoperative Models For Epilepsy Surgical Planning And Guidance., A Wang, S M Mirsattari, A G Parrent, T M Peters

Robarts Imaging Publications

OBJECTIVE: During epilepsy surgery it is important for the surgeon to correlate the preoperative cortical morphology (from preoperative images) with the intraoperative environment. Augmented Reality (AR) provides a solution for combining the real environment with virtual models. However, AR usually requires the use of specialized displays, and its effectiveness in the surgery still needs to be evaluated. The objective of this research was to develop an alternative approach to provide enhanced visualization by fusing a direct (photographic) view of the surgical field with the 3D patient model during image guided epilepsy surgery.

MATERIALS AND METHODS: We correlated the preoperative plan …


Semi-Automated Dental Cast Analysis Software, Mathew Thomas Jan 2011

Semi-Automated Dental Cast Analysis Software, Mathew Thomas

Browse all Theses and Dissertations

Dental casts have been used extensively to study almost all aspects of the human dentition. These aspects varied from the study of tooth form and morphology, inheritance and genetics, growth and development, occlusion, arch alignment and crowding to mathematical determination of dental arch form.

The aim of this project was to develop a tool to semi-automate the measurement of dental casts that would be precise, accurate and efficient. Measurements include tooth widths, arch lengths and widths, angle of rotation and crown area for each tooth.

The task was divided into two different parts: first, the development of semi-automatic software to …


A Fully Automated Non-External Marker 4d-Ct Sorting Algorithm Using A Serial Cine Scanning Protocol, Greg Carnes, Stewart Gaede, Edward Yu, Jake Van Dyk, Jerry Battista, Ting-Yim Lee Apr 2009

A Fully Automated Non-External Marker 4d-Ct Sorting Algorithm Using A Serial Cine Scanning Protocol, Greg Carnes, Stewart Gaede, Edward Yu, Jake Van Dyk, Jerry Battista, Ting-Yim Lee

Edward Yu

Current 4D-CT methods require external marker data to retrospectively sort image data and generate CT volumes. In this work we develop an automated 4D-CT sorting algorithm that performs without the aid of data collected from an external respiratory surrogate. The sorting algorithm requires an overlapping cine scan protocol. The overlapping protocol provides a spatial link between couch positions. Beginning with a starting scan position, images from the adjacent scan position (which spatial match the starting scan position) are selected by maximizing the normalized cross correlation (NCC) of the images at the overlapping slice position. The process was continued by 'daisy …


3d Thoracoscopic Ultrasound Volume Measurement Validation In An Ex Vivo And In Vivo Porcine Model Of Lung Tumours, V. Hornblower, E. Yu, A. Fenster, J. Battista, R. Malthaner Jan 2007

3d Thoracoscopic Ultrasound Volume Measurement Validation In An Ex Vivo And In Vivo Porcine Model Of Lung Tumours, V. Hornblower, E. Yu, A. Fenster, J. Battista, R. Malthaner

Edward Yu

The purpose of this study was to validate the accuracy and reliability of volume measurements obtained using three-dimensional (3D) thoracoscopic ultrasound (US) imaging. Artificial "tumours" were created by injecting a liquid agar mixture into spherical moulds of known volume. Once solidified, the "tumours" were implanted into the lung tissue in both a porcine lung sample ex vivo and a surgical porcine model in vivo. 3D US images were created by mechanically rotating the thoracoscopic ultrasound probe about its long axis while the transducer was maintained in close contact with the tissue. Volume measurements were made by one observer using the …