Engineering Commons^™

Study Of The Stability Of Heparin/Collagen Layer-By-Layer Coatings, Hector M. Apodaca Reyes

Chemical Engineering Undergraduate Honors Theses

Pairing heparin with collagen-based medical implants has opened a whole new area of research for enhancing the desired effect of current implants. In fact, heparin (HEP) and collagen (COL) layer-by-layer (LbL) coatings have shown impressive results in forming polyelectrolyte multilayers. It has been already seen on skin grafts, nerve guide conduits (NGCs), and drug delivery devices yielding promising results. Due to being a simple, cost-efficient, and versatile option to fabricate thin biomimetic films, this self-assembly technique is one of the most effective methods to immobilize extracellular matrix (collagen and heparin) onto medical devices and implants. Even though previous studies have …

Preparing Homogenous Composites Of Collagen And Cellulose Nanocrystals For Tissue Engineering Research, Zachary Stanley

Biological and Agricultural Engineering Undergraduate Honors Theses

Advancements in medicine and our understanding of stem cells have led to a greater emphasis on further developing research focused on tissue engineering. This research has led to the rise of both two-dimensional and three-dimensional scaffolds that can be utilized to repair bone, skin, vascular, and potentially even nervous tissue. One of the prominent compounds used in modern scaffolds is collagen-based hydrogels due to their low antigenicity and ability to provide structure to cells. There is potential to further improve upon this three-dimensional scaffold by incorporating cellulose nanocrystals (CNCs) into a composite hydrogel with collagen. The addition would increase the …

Regenerative Medicine For Tendon/Ligament Injuries: De Novo Equine Tendon/Ligament Neotissue Generation And Application, Takashi Taguchi

LSU Doctoral Dissertations

Tendon and ligament injuries are debilitating conditions across species. Poor regenerative capacities of these tissues limit restoration of original functions. The first study evaluated the effect of cellular administration on tendon/ligament injuries in horses using meta-analysis. The cellular administration was effective in restoring ultrasonographic echogenicity and increasing vascularity during early phase of healing. Additionally, it improved microstructural organization of healed tissue in terms of cellularity and fiber alignment. However, the study did not support its use for increasing rate of return to performance, expression/deposition of tendon-specific genes/proteins, or mechanical properties.

The findings led to the second study that engineered implantable …

Nonlinear Optical Microscopy Assessment Of Tissue Structure And Chondrocyte Viability Of Articular Cartilage, Michael Le

All Theses

Articular cartilage functions to protect the ends of bones by providing a surface that can withstand compressive forces and minimize friction during movement. Collagen fibers form the organizational backbone of the extracellular matrix (ECM) in cartilage. Proteoglycans within the ECM function to retain water and provide the tissue with the swelling pressure needed to withstand compressional forces. Chondrocytes, the only type of cell found in articular cartilage, produces these collagen fibers and proteoglycans to maintain the tissue structure and function. Significant injuries to articular cartilage can damage the chondrocytes and disrupt their ability to maintain homeostasis in the tissue. Therefore, …

Promotion Of Human Schwann Cell Proliferation Using Heparin/Collagen Coated Nerve Conduits, John Magness

Chemical Engineering Undergraduate Honors Theses

Often in the aftermath of an injury or surgery, the sense of touch and muscle control is lost in the affected area as nerves are damaged or severed and fail to grow back completely. The regeneration of the nerve cells can be promoted by treating the nerves with nerve conduits. Nerve conduits are hollow cylinders of bio-compatible materials that can be surgically implanted to the disconnected nerve to promote and direct the growth of nerves. The objectives of this research are to investigate the ability of nerve conduits treated with layer-by-layer coatings to promote the growth of Schwann cells, to …

Computational Bone Mechanics Modeling With Frequency Dependent Rheological Properties And Crosslinking, Timothy G. Moreno

Master's Theses

Bone is a largely bipartite viscoelastic composite. Its mechanical behavior is determined by strain rate and the relative proportions of its principal constituent elements, hydroxyapatite and collagen, but is also largely dictated by their geometry and topology. Collagen fibrils include many segments of tropocollagen in staggered, parallel sequences. The physical staggering of this tropocollagen allows for gaps known as hole-zones, which serve as nucleation points for apatite mineral. The distance between adjacent repeat units of tropocollagen is known as D-Spacing and can be measured by Atomic Force Microscopy (AFM). This D-Spacing can vary in length slightly within a bundle, but …

Correlating With Local Variation In Collagen Level And Mechanical Properties Of The Heart Tissues, Talayeh Tavangar

Electronic Theses and Dissertations

The determination of the myocardium's tissue properties is essential in constructing finite element (FE) models of the heart. To obtain accurate results, especially for functionally modeling the heart, we must determine the tissue properties in-vivo. The calculation of the heart tissue properties remains a challenging area as it is categorized as a heterogeneous, anisotropic, nonlinear soft tissue that undergoes large deformation. In this work, we tried to introduce and evaluated a finite element method to determine the mechanical properties of the cardiac tissue. The introduced method combined a finite element modeling with the experimentally obtained images from the left and …

Biomanufacturing Organized Collagen-Based Microfibers As A Tissue Engineered Device (Tend) For Tendon Regeneration, Yas Maghdouri-White, Nardos Sori, Stella Petrova, Hilary Wriggers, Nathan Kemper, Amrita Dasgupta, Kelly Coughenour, Seth Polk, Nick Thayer, Mario Rodriguez, Bill Simon, Anna Bulysheva, Kevin Bonner,, Steven Arnoczky, Samuel Adams, Michael Francis

Bioelectrics Publications

Approximately 800,000 surgical repairs are performed annually in the U.S. for debilitating injuries to ligaments and tendons of the foot, ankle, knee, wrist, elbow and shoulder, presenting a significant healthcare burden. To overcome current treatment shortcomings and advance the treatment of tendon and ligament injuries, we have developed a novel electrospun Tissue ENgineered Device (TEND), comprised of type I collagen and poly(D,L-lactide) (PDLLA) solubilized in a benign solvent, dimethyl sulfoxide (DMSO). TEND fiber alignment, diameter and porosity were engineered to enhance cell infiltration leading to promote tissue integration and functional remodeling while providing biomechanical stability. TEND rapidly adsorbs …

Diffuse Damage Repair Mechanism In Bone, Leila Mehraban Alvandi

Dissertations and Theses

Bone microdamage is a result of fatigue, creep or ‘wear and tear’ caused by physiological activities and largely contributes to bone fragility. Bone, unlike engineered materials, has the ability to repair the microscopic cracking or microdamage through targeted, osteoclast-mediated bone remodeling. This capability is crucial for preservation of its structural integrity and quality; failure of the skeleton to effectively repair microdamage leads to accumulation of damage, which is one of the main contributors to bone fragility. Linear microcracks (50-100 µm) and diffuse damage (Dif.Dx) (sub-micron) are the two types of microdamage. Recent studies show that Dif.Dx repairs without bone remodeling, …

Measuring Collagen Arrangement And Its Relationship With Preterm Birth Using Mueller Matrix Polarimetry, Joseph James Chue-Sang

FIU Electronic Theses and Dissertations

Preterm birth (PTB) is defined as delivery prior to 37 weeks of gestation. It is the leading cause of infant death worldwide, responsible for infant neurological disorders, long-term cognitive impairment, as well as chronic health issues involving the auditory, visual, digestive, and respiratory systems. In expectant mothers, causes for PTB can include infection, inflammation, vascular disease, short intervals between pregnancies, multiple gestations and genetic factors. In the U.S., PTB occurs in over 11% of births and at an elevated 18.1% in Miami-Dade County, FL; while in the developing world the incidence of PB is over 15%. Early identification of at-risk …

Fabrication And Characterization Of Collagen-Polypyrrole Constructs Using Direct-Ink Write Additive Manufacturing, Rooshan Arshad

Electronic Thesis and Dissertation Repository

Current efforts in the tissue engineering field are being directed towards the creation of platforms which will facilitate in instructing cells towards biologically relevant outcomes such as stem cell differentiation and disease pathophysiology. Traditional fabrication methods serve as a limiting factor for the production of such platforms as they lack feature and geometric complexity. Additive Manufacturing (AM) offers advantage over said methods by affording designers creative freedom and great control over printed constructs. Such constructs can then be used to create appropriate models for study- ing a plethora of tissues and structures. An AM methodology for Direct-Ink Write (DIW) printing …

Analysis Of Cellular Interactions Within A Collagen Hydrogel, Austin N. Worden

Theses and Dissertations

Evidence has arisen over the past several years that use of a three- dimensional (3D) culture system provides a distinct advantage over two- dimensional (2D) systems when cellular interactions are examined in a more natural environment. Changes in morphology, speed, and directionality of cells tested in both planar and 3D matrices have all demonstrated that using 3D system is advantageous. The changes to the cellular migration patterns were shown to be dependent on several variables within the surrounding substrate including cellular content, physical environment, and the matrix chemical milieu. We have taken advantage of using collagen hydrogels as a 3D …

Three-Dimensional Collagen Tubes For In Vitro Modeling, Rebecca Jones

Theses and Dissertations

Collagen type I represents a novel material for three-dimensional in vitro models. While two-dimensional models are typically inadequate for recreating the complex processes of the body, collagen provides a three-dimensional basis with a variety of applications, including remodeling of vascular cells under tension and vascular stenosis. Smooth muscle cells reorganize and reconstruct their environment differently under conditions of tensions, such as with sutures, or under conditions without applied external tension. Vascular stenosis, the abnormal narrowing of blood vessels, arises from defective developmental processes or atherosclerosis-related adult pathologies. Stenosis triggers a series of adaptive cellular responses that induces adverse remodeling, which …

Pneumatospinning Of Collagen Microfibers From Benign Solvents, Seth Polk, Nardos Sori, Nick Thayer, Yas Maghdouri-White, Anna A. Bulysheva, Michael P. Francis

Medical Diagnostics & Translational Sciences Faculty Publications

Introduction. Current collagen fiber manufacturing methods for biomedical applications, such as electrospinning and extrusion, have had limited success in clinical translation, partially due to scalability, cost, and complexity challenges. Here we explore an alternative, simplified and scalable collagen fiber formation method, termed 'pneumatospinning,' to generate submicron collagen fibers from benign solvents. Methods and results. Clinical grade type I atelocollagen from calf corium was electrospun or pneumatospun as sheets of aligned and isotropic fibrous scaffolds. Following crosslinking with genipin, the collagen scaffolds were stable in media for over a month. Pneumatospun collagen samples were characterized using Fourier-transform infrared spectroscopy, circular dichroism, …

Electrospun Collagen Fibers For Tissue Regeneration Applications, Ying Li

Electronic Thesis and Dissertation Repository

Tissue engineering aims to regenerate damaged and deceased tissue by combining cells with scaffold made from an appropriate biomaterial and providing a conducive environment to guide cell growth and the formation or regeneration of new tissue or organ. While collagen, an important material of the extracellular matrix (ECM), is a natural choice as a scaffold biomaterial, the conducive environment can only be created by having the ability to control the geometry, organization, structural and mechanical properties of the scaffold. Moreover, degradability and degradation rate control of the scaffold has to be taken into consideration too. In this work, we aim …

Effects Of Protein-Coated Nanofibers On Conformation Of Gingival Fibroblast Spheroids: Potential Utility For Connective Tissue Regeneration, Gili Kaufman, Ryan A. Whitescarver, Laiz Nunes, Xavier-Lewis Palmer, Drago Skrtic, Wojtek Tutak

Engineering Technology Faculty Publications

Deep wounds in the gingiva caused bytrauma or surgery require a rapid and robust healing of connective tissues. Wepropose utilizing gas-brushed nanofibers coated with collagen and fibrin for that purpose. Our hypotheses are that protein-coated nanofibers will: (i) attract and mobilize cells in various spatial orientations, and (ii) regulate the expression levels ofspecific extracellular matrix (ECM)-associated proteins, determining the initial conformational nature ofdense and soft connective tissues. Gingival fibroblast monolayers and3D spheroids were cultured onECMsubstrate and covered with gas-blown poly-(DL-lactide-co-glycolide)(PLGA) nanofibers (uncoated/coated with collagen and fibrin). Cell attraction and rearrangement was followed byF-actin staining and confocal microscopy. Thicknesses ofthe cell …

Biochemical And Histological Differences Between Costal And Articular Cartilages, Michael W. Stacey

Bioelectrics Publications

Biologically, costal cartilage is an understudied tissue type and much is yet to be learned regarding underlying mechanisms related to form and function, and how these relate to disease states, specifically chest wall deformity. Chest wall deformities have a component of inheritance, implying underlying genetic causes; however the complexity of inheritance suggests multiple genetic components. At our Centre investigations were performed on gene expression of key select genes from costal cartilage removed at surgery of patients with chest wall deformity to show high expression of decorin, a key player in collagen fiber formation and growth. Also, the degree of tissue …

Bi-Directional Fatigue Life Behavior Of Bovine Meniscus, Jaremy Creechley

Boise State University Theses and Dissertations

Meniscal injuries due to tissue tearing are prevalent in the U.S. yet the failure behavior of the meniscus is poorly understood. Clinical studies indicate that fatigue failure causes many of these tears. The highly circumferentially aligned fibers result in transversely isotropic material properties. Tears preferentially align bi-directionally to the fiber orientation. The aim of this study is to present the bi-directional fatigue life behavior of meniscal fibrocartilage. A novel fatigue life approach was developed to achieve this aim. Forty-eight bovine specimens were subjected to cyclic sinusoidal tension-tension stress at 2 Hz until rupture. Normalized peak tensile stresses were determined at …

Densified Collagen-Fibril Biomaterials For Bone Tissue Engineering, Lauren E. Watkins

Open Access Theses

Millions of craniofacial bone defects occur annually as a result of trauma, congenital defects, disease, or tooth extraction. When present in the oral cavity, these defects are associated with adverse impacts on speech, mastication, and aesthetics. Thus, there is a clinical need for interventional strategies to restore and preserve alveolar bone mass to improve the success of future treatment options intended to reestablish functionality and aesthetics. Guided bone regeneration using bone grafts and a membrane represent the current standard of care for repairing alveolar bone defects, but face a number of limitations related to resorption time and structural integrity. Improvements …

Promoting Extracellular Matrix Crosslinking In Synthetic Hydrogels, Marcos M. Manganare

Masters Theses

The extracellular matrix (ECM) provides mechanical and biochemical support to tissues and cells. It is crucial for cell attachment, differentiation, and migration, as well as for ailment-associated processes such as angiogenesis, metastases and cancer development. An approach to study these phenomena is through emulation of the ECM by synthetic gels constructed of natural polymers, such as collagen and fibronectin, or simple but tunable materials such as poly(ethylene glycol) (PEG) crosslinked with short peptide sequences susceptible to digestion by metalloproteases and cell-binding domains. Our lab uses PEG gels to study cell behavior in three dimensions (3D). Although this system fosters cell …

Viewing The Extracellular Matrix: An Imaging Method For Tissue Engineering, Michael Drakopoulos, Sarah Calve

The Summer Undergraduate Research Fellowship (SURF) Symposium

The field of regenerative medicine seeks to create replacement tissues and organs, both to repair deficiencies in biological function and to treat structural damage caused by injury. Scaffoldings mimicking extracellular matrix (ECM), the structure to which cells attach to form tissues, have been developed from synthetic polymers and also been prepared by decellularizing adult tissue. However, the structure of ECM undergoes significant remodeling during natural tissue repair, suggesting that ECM-replacement constructs that mirror developing tissues may promote better regeneration than those modeled on adult tissues. This work investigated the effectiveness of a method of viewing the extracellular matrix of developing …

Computational Prediction Of Remodeling Of Collagen Fiber Network In Articular Cartilage Under Dynamic Unconfined Compression, Juan Andres Coello Amado

Theses and Dissertations - UTB/UTPA

A poroelastic finite element model of a heterogeneous cartilage disk was created based on previous studies and experimental setups; this allows us to study cartilage behavior under dynamic unconfined compression. Previous studies have used a Post Hoc approach, which consist of searching for patterns or relationships between predicted mechanical parameters obtained through computational and experimental results. Our goal in this study is to take the same Post-Hoc approach and identify patterns between predicted mechanical parameters, such as fiber strain or stress, and experimentally-measured collagen fiber distribution (i.e. reorientation of fibers under dynamic unconfined compression). After computational predictions were obtained, it …

Creation Of A 3d Construct To Aid Cell Migration And Promote Cell Capture, Joseph Michael Sanders

Legacy Theses & Dissertations (2009 - 2024)

Most cancer-related deaths are attributed to metastasis. The tumor microenvironment is a complex environment which is not fully understood. The Nano Intravital Device (NANIVID) is a versatile, biocompatible device that allows for the manipulation of the tumor microenvironment in vitro and in vivo, providing a platform to study various aspects of tumor progression. The purpose of this study is to modify the NANIVID to resemble the tumor microenvironment in order to allow for a seamless transition from the in vivo environment into the engineered environment within the NANIVID. This engineered microenvironment will promote cell migration and cell capture. It has …

Using Collagen Binding Poly(N-Isopropylacrylamide) Nanoparticles To Prevent Intravascular Platelet Adhesion And Activation, Anna E. Searle, Alyssa Panitch, James Mcmasters

The Summer Undergraduate Research Fellowship (SURF) Symposium

Balloon angioplasty, the most prevalent non-surgical treatment for Atherosclerosis, damages the endothelial layer of the artery, baring an underlying collagenous layer, which causes platelet adhesion and activation and eventual thrombosis and intimal hyperplasia. Previous work in our lab has used a collagen-binding peptidoglycan, dermatan-sulfate-SILY (DS-SILY), that has been shown to bind to type I collagen and prevent platelet adhesion and activation. Our goal is to fabricate nanoparticle-SILY by cross-linking SILY to a poly(N-isopropylacrylamide) (NIPAm) nanoparticle instead of a DS backbone, while retaining the SILY’s high collagen binding affinity and platelet inhibition capacity observed in DS-SILY. Using a biotin-streptavidin assay, we …

Oriented Collagen And Applications Of Waveguide Evanescent Field Scattering (Wefs) Microscopy, Qamrun Nahar

Electronic Thesis and Dissertation Repository

In this thesis, Waveguide Evanescent Field Scattering (WEFS) microscopy is developed as a non-invasive, label-free live cell imaging technique. This new high-contrast imaging can be employed to study the first hundred nanometers from the surface as it utilizes the evanescent field of a waveguide as the illumination source. Previously, waveguide evanescent field fluorescence (WEFF) microscopy was developed as a fluorescence imaging technique comparable to the total internal reflection fluorescent (TIRF) microscopy. Both the WEFF and WEFS technique utilizes the same fundamental concepts except in WEFS microscopy imaging is accomplished without the application of any fluorescent labeling. In this work, bacterial …

Mammary Epithelial Cells Cultured Onto Non-Woven Nanofiber Electrospun Silk-Based Biomaterials To Engineer Breast Tissue Models, Yas Maghdouri-White

Theses and Dissertations

Breast cancer is one of the most common types of cancer affecting women in the world today. To better understand breast cancer initiation and progression modeling biological tissue under physiological conditions is essential. Indeed, breast cancer involves complex interactions between mammary epithelial cells and the stroma, both extracellular matrix (ECM) and cells including adipocytes (fat tissue) and fibroblasts (connective tissue). Therefore, the engineering of in vitro three-dimensional (3D) systems of breast tissues allows a deeper understanding of the complex cell-cell and cell-ECM interactions involved during breast tissue development and cancer initiation and progression. Furthermore, such 3D systems may provide a …

Electrospinning Of Core-Shell Collagen Nanofibers, Ying Li

Electronic Thesis and Dissertation Repository

In tissue engineering, the scaffold plays a critical role in guiding and supporting cells to function and grow optimally. The electrospun nanofibrous scaffold can serve as a near ideal substrate for tissue engineering because it has high surface area and the three-dimensional interconnected porous network can enhance cell attachment and proliferation. Core-shell nanofibrous scaffolds produced with coaxial electrospinning allow bioactive molecule encapsulation to improve cell adhesion, mediate and promote the proper signaling among the cells for their functioning and growth. In the current study, core-shell collagen nanofibers were fabricated via coaxial electrospinning with horizontal and vertical configurations. Core-shell nanofibers with …

Nanomechanics Of Electrospun Nanofibres For Tissue Engineering Of The Tympanic Membrane, Sara Makaremi

Electronic Thesis and Dissertation Repository

The Tympanic Membrane (TM), also known as the eardrum, includes layers of organized collagen nanofibres which play an essential role in sound transmission. Perforations that are caused by infection or accident must be repaired in order to restore hearing. Tympanoplasty is performed using grafts that are prepared from bladder, cartilage, temporal fascia and cadaveric skin. However, since mechanical properties of these grafts do not match those of the original TM, normal hearing is not fully restored. The goal of this study is to develop nanofibrous scaffolds for tissue engineering of the TM in order to circumvent the complications addressed with …

Effect Of Applied Uniaxial Stress On Rate And Mechanical Effects Of Cross-Linking In Tissue-Derived Biomaterials, Debbie Chachra, Paul Gratzer, Christopher Pereira, J. Lee

Debbie Chachra

Conformational changes in collagen fibrils, and indeed the triple helix, can be produced by application of mechanical stress or strain. We have demonstrated that the rate of cross-linking in glutaraldehyde and epoxide homobifunctional reagents can be modulated by uniaxial stress (strain). Two poly(glycidyl ether) epoxides were used: Denacol^® EX-810 (a small bifunctional reagent), and Denacol EX-512 (a large polyfunctional reagent). To prevent any possible effect from being masked by saturation of cross-linking sites, bovine pericardium was cross-linked to such an extent that the increase in collagen denaturation temperature, T_d, was one-half of the maximal rise achievable with …

Persistent Vascular Collagen Accumulation Alters Hemodynamic Recovery From Chronic Hypoxia, Diana M. Tabima, Alejandro Roldan-Alzate, Zhijie Wang, Timothy A. Hacker, Robert C. Molthen, Naomi C. Chesler

Biomedical Engineering Faculty Research and Publications

Pulmonary arterial hypertension (PAH) is caused by narrowing and stiffening of the pulmonary arteries that increase pulmonary vascular impedance (PVZ). In particular, small arteries narrow and large arteries stiffen. Large pulmonary artery (PA) stiffness is the best current predictor of mortality from PAH. We have previously shown that collagen accumulation leads to extralobar PA stiffening at high strain (Ooi et al. 2010). We hypothesized that collagen accumulation would increase PVZ, including total pulmonary vascular resistance (Z₀), characteristic impedance (Z_C), pulse wave velocity (PWV) and index of global wave reflections (P_b/P …