Engineering Commons^™

Open-Source And 3-D Printed Autoinjector, Anjutha Selvaraj

Undergraduate Student Research Internships Conference

Autoinjectors have become popular modern injectable medical devices used as drug delivery systems. Due to its ease, capability and reliability compared to other conventional injectable medical devices, the market and manufacturing demand for autoinjector devices are increasing at a staggering rate. Although autoinjectors can offset healthcare treatment costs through self-administered medication, they are expensive for consumers. This paper describes the design and manufacture of a spring-driven and 3-D printed autoinjector using open-source hardware. By making it an open-source resource for everyone, the barrier of advanced research in design and production can be lifted, thus making it easily manufacturable and cost-effective. …

Morphology And Strain In The Subchondral Trabeculae Of Osteoarthritic Humeral Heads, Anna Yang

Undergraduate Student Research Internships Conference

This project compares the strains and morphological parameters of subchondral bone in osteoarthritic and non-pathogenic cadaveric humeral heads.

Normative Joint Angles And Compensation During Fit-Hansa Test, Jennifer J. Villeneuve

Undergraduate Student Research Internships Conference

Imagine a world where no injuries occurred, muscular compensation was able to be detected early on and imbalances resolved before any risks appear. Muscular compensation can cause injuries, especially with repetitive motion or through activities of daily living. The study I conducted focuses on the compensation methods of shoulder abduction and trunk lean during the FIT-HaNSA series. Determining the normative ranges of motion can increase early detection of fatigue for all individuals. This can help make repetitive jobs such as working in a factory much safer for all employees, as they can switch tasks as soon as fatigue is identified. …

Morphology Of The Acromion And Scapular Spine With Special Interest In The Strength & Failure Prediction After Reverse Total Shoulder Replacement, Andrei M. Matusa, Cole Fleet, George S. Athwal, James A. Johnson

Undergraduate Student Research Internships Conference

Scapular spine fractures following a reverse arthroplasty are a significant clinical concern. This ongoing study looks at the morphology of the acromion and scapular spine with an interest in the strength and failure prediction of the bone. Digital 3D models of the scapular spine were created from cadaver CTs, then bone density and distribution data was obtained. It was found that the cortical bone was most dense just medial of the lateral angle. The cross-sectional area here was also the largest and decreased medially. This has important implications for implant fixation hardware as cortical bone --compared to cancellous bone-- is …

Tca Fabrication Devices, Brendan R. Difabio

Undergraduate Student Research Internships Conference

Twisted coil actuators are a recent technology that has different properties from popular actuators used today. Being so new, there is still much to learn about these actuators. This project aims to create devices that can be used to make the fabrication process simple and repeatable.

Producing And Measuring Oscillatory Shear In A Novel Microfluidic Chip, Sanaz Lordfard, Daniel Lorusso, Tamie L. Poepping, Hristo N Nikolov, Kayla Soon, Stephen Sims, Jeffrey Dixon, David Holdsworth

Undergraduate Student Research Internships Conference

Purpose: To demonstrate the effectiveness of a novel microfluidic device mimicking oscillatory blood flow, allowing cell biologists to examine how endothelial cells respond to a range of oscillatory shear stress levels.

Methods: The microfluidic chip consists of a circular-shaped reservoir, leading to a rectangular channel that is examined under a microscope. The plunger is connected to a speaker system and oscilloscope, allowing the plunger to apply a range of frequencies (5-60Hz) and voltages (5-10 V, leading to a variety in oscillation amplitudes) to the reservoir region. 1.1 um fluorescent particles diluted in distilled water were used for tracking. Processing was …

Development Of A Low-Cost Algometer, Thomas D. Naish, Ana Luisa Trejos, Dave M. Walton

Undergraduate Student Research Internships Conference

Many people suffer from chronic pain, the reasons for which are not always well understood. Algometers are instruments that can help clinicians understand the nature of pain by determining the force at which pain becomes noticeable or unbearable. Algometers can also be used to determine the effects that external influences can have on pain tolerance in healthy people.

The goal of this project was to develop an algometer that can measure the normal range of pain thresholds and tolerances of most patients, which ranges up to 35 lbs. Also, the result needed to be accurate to about 1% and made …

Digital Navigation For Shoulder Arthroplasty, Jeremy Silver-Mahr

Undergraduate Student Research Internships Conference

No abstract provided.

Web Application – Utilizing A Pose Estimation And Augmented Reality Api For Hand Telerehabilitation, Herbert Shin

Undergraduate Student Research Internships Conference

No abstract provided.

A Ph-Sensitive Delivery System For The Prevention Of Dental Caries Using Salivary Protein, Yi Zhu, Yizhi Xiao, Elizabeth Gillies, Walter L. Siqueira

Western Research Forum

Dental caries remains one of the most common chronic diseases worldwide. In previous studies, salivary proteins (e.g. histatin 3, statherin) have demonstrated biological functions including the inhibition of crystal growth, antibacterial activities, which are directly related to tooth homeostasis and prevention of dental caries. However, proteins are susceptible to the high proteolytic activities in the oral environment. Therefore, pH-sensitive chitosan nanoparticles (CNs) have been proposed as potential carriers to protect proteins against enzymatic degradation at physiological salivary pH, in addition to swell selectively at lower pH conditions to facilitate the release of the encapsulated proteins, as major oral complications occur …

The Effect Of Radial Head Hemiarthroplasty Stem Fit On Radiocapitellar Contact Mechanics: Is Loose Fit Better Than Rigidly Fixed?, Jakub Szmit, Graham J.W. King, James A. Johnson, G. Daniel G. Langohr

Western Research Forum

Background/Methods: Radial head hemiarthroplasty is commonly employed to manage comminuted displaced fractures. With regards to implant fixation, current designs vary with some prostheses aiming to achieve a tight 'fixed' fit, and others utilizing a smooth stem with an over reamed 'loose' fit. The purpose of the present study was to evaluate the effect of radial head hemiarthroplasty stem fit on radiocapitellar contact using a finite element model which simulated both fixed (size-for-size) and loose (1, 2 & 3mm over reamed) stem fits.

Hypothesis: It was hypothesized that a loose stem fit would improve radiocapitellar contact mechanics, with increased contact area …

Multifunctional Hybrid Sol-Gel Implant Coatings On Anodized Titanium Substrates To Improve Osseointegration And Antimicrobial Effectiveness, Zach Gouveia

Western Research Forum

To improve patient outcomes in orthopedic and dental implantation procedures, the development of multifunctional implant coatings that can inhibit microbial cell proliferation while promoting osseointegration have been sought out by clinicians. While recent developments in material science and cell biology have seen the development of such coatings, many proposed systems lack clinical translatability. For example, to reach the clinic, modern coating systems must be highly adherent to their substrate (to avoid delamination upon implantation), have sufficient wettability (to promote the fixation of cells), and facilitate the controlled and sustained release of antimicrobial factors (falling within the therapeutic window to prevent …

A Novel Hybrid Imaging System To Aid In Surgical Decision Making, Lawrence Yip, Madeleine Van De Kleut, Ivan Kosik, Astrid Chamson-Reig, Jeffrey Jl Carson

Western Research Forum

Background:

Breast cancer accounts for 25% of all cancer cases among women. In breast-conserving surgery, a common treatment, the tumour is excised with a healthy tissue margin. However, detection of the margin can be difficult. Current techniques to guide excision are often insufficient, and re-excision can occur up to 25% of the time.

Methods:

Photoacoustic imaging is a hybrid imaging modality that combines the advantages of optical imaging and ultrasound while using safe non-ionizing light. This project involves the development of a novel imaging system with a new scanner design to overcome common limitations and provide images to aid in …