Engineering Commons^™

Tailoring A System Engineering And Management Plan For A University Satellite Team, Jacob D. Anderson

Masters Theses

"A Systems Engineering and Management Plan (SEMP) helps enable a successful engineering project or team. All university teams working on satellite development encounter similar obstacles that are not commonly seen in industry. As a result, university teams must determine new approaches to solve these unique and difficult problems. A SEMP can mitigate risks, solve problems, and provide streamlined solutions. A modified SEMP is proposed along with guidance for implementing it into a new team and an existing team.

The adopted SEMP provides a road map for the technical execution and program management of a university team. The SEMP should be …

Development Of A Mission Design Tool For Computing Libration Point Formations Using Differential Corrections Initialized With A Genetic Algorithm, Donna Jennings

Doctoral Dissertations

"The growing interest in deep space spacecraft missions and distributed spacecraft formations has established the need for state-of-the-art advancements in the areas of relative dynamics and mission design. The focus of this research is to develop methods for identifying natural (i.e. ballistic) relative formation trajectories in the vicinity of the collinear libration points. A natural formation decreases the station keeping costs, lowering the consumption of spacecraft resources and extending mission lifetime. This research adapts both numerical and machine learning approaches to the problem of mission design. A genetic algorithm was first used to identify a multi-agent spacecraft formation in the …

Flight Software Development For A University-Class Microsatellite Mission, Yumeka Nagano

Masters Theses

"The purpose of this research is to present the software development process used by the Command and Data Handling (C&DH) subsystem as a part of a microsatellite mission underway at the Missouri University of Science and Technology. The mission's objective is to evaluate the performance of an innovative cold gas propulsion system for use in formation flying applications and the incorporation of a stereoscopic imaging sensor used to measure the satellite pair's relative position and velocity vectors in real time. C&DH uses a Raspberry Pi 3 Model B as the flight computer running a Linux environment, and the flight code …

Implementing Effective University - Level Small Satellite Assembly, Integration, And Testing Procedures, Tyler Patrick Hoover

Masters Theses

"As applications for satellite assets grow within government and commercial spheres, demand for aerospace engineers and related technicians has pushed universities to develop graduates with relevant knowledge in the field. As such, universities began to grow university satellite programs to give members hands-on experience and a background of working on satellite systems before entering the workforce.

The M-SAT team at Missouri University of Science and Technology, along with contributions and assistance from the Air Force Research Laboratory and NASA, are progressing their first satellite mission through assembly, integration, and testing (AIT) development. This document serves to give a background into …

Fully Kinetic Particle-In-Cell Simulations Of Plasma-Surface-Dust Interactions For Lunar Exploration, Jianxun Zhao

Doctoral Dissertations

"The studies involving lunar surface explorations have drawn attentions in recent years. A better understanding of possible potential hazards to astronauts and electronic equipment has become a necessity for future lunar explorations. The lunar surface, lacking an atmosphere and global magnetic field therefore directly exposed to solar radiation and solar wind plasma, is electrically charged by the bombardment of solar wind plasma and emission/collection of photoelectrons. Additionally, lunar dust grains can also get charged and levitated from the surface under the influence of the electric field as well as gravity within the plasma sheath. Since the plasma sheath formed near …

Studies Of Multiphase Distribution And Flow In Bubble/ Slurry Bubble Columns With /Without Internals And Advanced Sustainable Construction Materials Using Sophisticated Measurement Techniques, Omar Farid

Doctoral Dissertations

"Bubble/slurry bubble columns have been widely studied and employed as multiphase flow reactors with and without vertical heat-exchanging tubes. In order to understand more deeply the effect of the dense internals on the hydrodynamics of bubble/slurry bubble column, systematic experiments were performed to visualize and quantify using the radioactive particle tracking (RPT) technique. A new methodology for implementing the radioactive particle tracking (RPT) technique has been developed to investigate the effect of the dense internals on the hydrodynamics of the bubble/slurry column reactor. Monte Carlo N-Particle (MCNP) simulation has been implemented to simulate the system to generate a large number …

Numerical Investigations Of 2-D Magnetic Nozzles On Pulsed Plasma Plumes, Joshua Daniel Burch

Masters Theses

"This research presents studies of a novel type of magnetic nozzle that allows for three-dimensional (3-D) steering of a plasma plume. Numerical simulations were performed using Tech-X's USim® software to quantify the nozzle's capabilities. A2-D planar magnetic nozzle was applied to plumes of a nominal pulsed inductive plasma (PIP) source with discharge parameters similar to those of Missouri S&T's Missouri Plasmoid Experiment (MPX). Argon and xenon plumes were considered. Simulations were verified and validated through a mesh convergence study as well as comparison with available experimental data. Periodicity was achieved over the simulation run time and phase angle samples were …

The Utilization And Loss Of Available Energy In Aerospace Systems, Mohammad Abbas

Doctoral Dissertations

“Theoretical principles and analytical methodology for the control volume-based energy availability methodology for aerospace vehicles are developed; applications are made to jet-propelled and rocket-propelled vehicles as well as to stand-alone engine systems. Energy availability utilization characteristics of a modeled turbojet engine are studied across a wide range of operating conditions of throttle setting, flight altitude, and flight Mach number. The method is also extended to consider jet-powered vehicles. Fundamental principles regarding entropy generation and energy availability are developed, including directly linking entropy generation and maximum range and endurance of a powered aircraft. Theory and application of the energy utilization methodology …

Theoretical And Experimental Application Of Neural Networks In Spaceflight Control Systems, Pavel Galchenko

Doctoral Dissertations

“Spaceflight systems can enable advanced mission concepts that can help expand our understanding of the universe. To achieve the objectives of these missions, spaceflight systems typically leverage guidance and control systems to maintain some desired path and/or orientation of their scientific instrumentation. A deep understanding of the natural dynamics of the environment in which these spaceflight systems operate is required to design control systems capable of achieving the desired scientific objectives. However, mitigating strategies are critically important when these dynamics are unknown or poorly understood and/or modelled. This research introduces two neural network methodologies to control the translation and rotation …

Quantum Inspired Concepts In Decision Making, Qizi Zhang

Doctoral Dissertations

"In this study, several new applications of quantum-inspired techniques are presented to advance the state of the art in decision making. In the first part, a quantum boost scheme for multiple-model filters based on extended Grover’s algorithm is presented for fault detection and parameter estimation. The quantum boost scheme accelerates the convergence of the posterior probabilities in the multiple-model filter. Stability proofs for the quantum boost scheme is presented and its performance is analyzed using benchmark examples. In the second part, the scope of application is extended to modeling human decision making. The open quantum system cognition model is applied …

Analysis Of Turbulence Model Uncertainty For Canonical Flow Problems Including Shock Wave Boundary Layer Interaction Simulations, Aaron James Erb

Doctoral Dissertations

"The purpose of this research is to present results of an uncertainty and sensitivity analysis study of commonly used turbulence models in Reynolds-Averaged Navier-Stokes (RANS) codes due to the epistemic uncertainty in closure coefficients for a set of turbulence model validation cases that represent the structure of several canonical flow problems. The study focuses on the analysis of a 2D zero pressure gradient flat plate, a 2D wall mounted hump, and an axisymmetric shock wave boundary layer interaction, all of which are well documented on the NASA Langley Research Center Turbulence Modeling Resource website. The Spalart-Allmaras (SA), the Wilcox (2006) …

Theoretical Study Of Magnetic Particles In A Shear Flow Subjected To A Uniform Magnetic Field, Christopher A. Sobecki

Doctoral Dissertations

"Magnetic manipulation of non-spherical magnetic microparticles is important for applications in shape-based and magnetic-based separations such as waste management, disease diagnostics, drug delivery, and mining. Manipulations of magnetic microparticles also include chain formation to assemble compositions for electronics, drug loading designs, and magnetorheological fluids for smart armor, hydraulic brakes, and dampers. In microfluidic devices, separation-formation-effectiveness depends on the shape of the channel, the shear rate, and the magnetic field strength and direction.

Particle separation and chain formation involved highly complex and computational expense-demanding studies in microfluidic devices, magnetic fields, and particle- particle/wall interactions. This research took complex experimental studies and …

Multi-Fidelity Modeling For Aerothermal Analysis Of Deployable Planetary Entry Technologies, Mario J. Santos

Doctoral Dissertations

“NASA is developing deployable entry technologies in the form of the Hypersonic Inflatable Aerodynamic Decelerator (HIAD) and the Adaptable Deployable Entry Technology (ADEPT) vehicles to support human exploration of Mars. To ensure that these technologies are reliable under uncertain entry conditions and extreme aerothermal environments, uncertainty quantification must be integrated into the design process which typically requires large number of high-fidelity computational fluid dynamics (CFD) simulations with prohibitively high computational cost. To address this challenge, construction of multi-fidelity aerothermal response predictions which combine low-fidelity correlations with fewer high-fidelity CFD models in a way that produces highly accurate surrogates with reduced …

Reveal Wind Loading Of Tornadoes And Hurricanes On Civil Structures Towards Hazard-Resistant Design, Ryan Honerkamp

Doctoral Dissertations

"Extreme winds impacting civil structures lead to death and destruction in all regions of the world. Specifically, tornadoes and hurricanes impact communities with severe devastation. On average, 1200 tornadoes occur in the United States every year. Tornadoes occur predominantly in the Central and Southeastern United States, accounting for an annual $1 billion in economic losses, 1500 injuries, and 90 deaths. The Joplin, MO Tornado in 2011 killed 161 people, injured more than 1000, destroyed more than 8000 structures, and caused $2.8 billion of property loss. Hurricanes occur predominantly on the United States East coast regions and along the coast of …

Information-Based Methods And Models For Particle Flow Filtering, Kari Catherine Ward

Doctoral Dissertations

"Recursive estimation methodologies, such as Kalman and Bayesian filters, typically require models of some kind to perform the estimation. This filtering process seeks to improve knowledge surrounding some quantities of interest, or states, over time by incorporation of imperfect observations. The models required pertain to the state dynamics, sensors from which measurements are obtained, and probabilistic models of the underlying stochastic processes. In addition to any number of necessary models, real-world application of a filter is normally accompanied by at least one, if not several, techniques to promote better performance. These methods vary in purpose from expanding the kinds of …

Cooperative Navigation Of Small Satellites In The Deep Space Environment, Jill Christine Davis

Doctoral Dissertations

“The continued development of small satellites (SmallSats) has made them an increasingly viable mission alternative to traditional monolithic spacecraft. Constellations, swarms, and formations of these small spacecraft have the potential to fill unique gaps in the space systems architecture, while reducing overall mission costs and increasing mission redundancy. Cooperative navigation between spacecraft within swarms and formations is critical to mission success, but poses many challenges for SmallSats due to their size, mass, power, and computing constraints. While Earth orbiting missions can rely on GNSS data for high-accuracy inertial and relative navigation, deep space missions require new navigation techniques. In this …

Dynamic Behavior And Interactions Of Ferrofluid Droplets Under Magnetic Fields In Low Reynolds Number Flows, Md Rifat Hassan

Doctoral Dissertations

Digital microfluidics in combination with emulsion microfluidics are crucial building blocks of droplet-based microfluidics, which are prevalent in a wide variety of industrial and biomedical applications, including polymer processing, food production, drug delivery, inkjet printing, and cell-based assays. Therefore, understanding the dynamics and interactions of droplets as well as the interactions between the droplets and solid surfaces are of great importance in order to improve the performance or product in these applications.

Recently, several studies in the literature have demonstrated the potential of magnetic fields in controlling the behavior of droplets in microscale; however, the fundamental mechanism behind the interesting …

Multiple-Site Fatigue Cracking Methodology To Assess Structural Integrity Of Aircraft Riveted Panels, Haroldo Chacon

Masters Theses

“Multiple Site Damage (MSD) is the most common source of Widespread Fatigue Damage (WFD) affecting structural integrity of aging aircraft fleets. Therefore, an understanding of its progression, the development of methods to prevent the onset, and the maintenance procedures precluding WFD are important to improve aircraft fleet longevity. A reliable and efficient numerical methodology to perform detailed Multiple Site Damage assessment in riveted structural joints was developed. A probabilistic methodology was employed in conjunction with Monte Carlo simulation technique; the fatigue initiation life at every potential crack initiation site was determined and initial damage scenarios were generated. Probabilistic crack growth …

Novel Piezo Actuators For Surface Cleaning, Yezad H. Anklesaria

Doctoral Dissertations

"Optical cameras are becoming increasingly common and are used in a variety of applications. With recent progress and transition toward more autonomous systems, the usage of optical systems will be common and widespread. Applications of the optical systems range from autonomous vehicles, home security systems, aviation, extraterrestrial vehicles, spacecraft, and satellites. Imaging systems are used in decision-making in many of these applications. Fouling of the field of view of the imaging system can impede the decision process. An active autonomous cleaning method for the optical surface of the optical systems reliably would be advantageous. The research work focuses on developing …

Composite-Based Additive Manufacturing Applications In The Polymer Injection Molding Cycle, Cody Bivens

Masters Theses

“The experimental method utilized in this research was the application of composite-based additive manufacturing (CBAM) mold plates in the injection molding process. The mold plates comprised carbon fibers and polyether ether ketone (PEEK) matrix. Modifications were made to the mold plates post manufacturing in order to properly adapt to the rest of the injection molding die. A custom cooling system was engineered and integrated into the injection molding machine for the CBAM mold plates. The polymer processed in the injection molding cycle for this study was Lustran 348 acrylonitrile butadiene styrene (ABS). The result of the trials conducted in this …

Fabrication And Characterization Of Multifunctional Composites, Aditya R. Thakur

Doctoral Dissertations

“This study details the research to facilitate fabrication and characterization of novel structural composites reinforced with carbon fibers. Across industries, materials with high performance-to-weight ratio are sought after. Using carbon fibers as secondary phases in these proposed composites, specific characteristics can be tailored in these materials to manufacture strong, lightweight, high performance structures. The first part of the research focused on the improvement in the mechanical properties of the composites using carbon fiber reinforcement. As a part of this study, toughened ceramic composites with predictable failure patterns were produced using carbon fiber inclusions. A closed-form analytical model was developed to …

Comparison Of Reynolds-Averaged Navier-Stokes Turbulence Models For Simulating Boundary Layers In Hypersonic Flows, Jorge-Valentino Kurose Bretzke

Masters Theses

“This study describes the use of Computational Fluid Dynamics (CFD) codes to simulate hypersonic boundary layers using several different turbulent closure models and comparing Reynolds-Averaged Navier-Stokes (RANS) simulations against Direct Numerical Simulations (DNS) of similar test cases. The test cases in this study consist of a flat plate in a Mach 8 freestream with a zero pressure gradient and wall recovery ratio of 0.48, as well as a Mach 8 axisymmetric nozzle also with a cold wall. The RANS models used in this study are the Spalart-Allmaras model, Baldwin-Lomax model, Menter K-Omega Baseline and Menter K-Omega Shear Stress Transport models. …

Generalization Of Polynomial Chaos For Estimation Of Angular Random Variables, Christine Louise Schmid

Doctoral Dissertations

“The state of a dynamical system will rarely be known perfectly, requiring the variable elements in the state to become random variables. More accurate estimation of the uncertainty in the random variable results in a better understanding of how the random variable will behave at future points in time. Many methods exist for representing a random variable within a system including a polynomial chaos expansion (PCE), which expresses a random variable as a linear combination of basis polynomials.

Polynomial chaos expansions have been studied at length for the joint estimation of states that are purely translational (i.e. described in Cartesian …

Characterization Of A Plasma Source Simulating Solar Wind Plasma In A Vacuum Chamber, Blake Anthony Folta

Masters Theses

"The United States has set an aggressive time line to not only return to the Moon, but also to establish a sustained human presence. In the Apollo missions dust was a significant factor, but the duration of those missions was short so dust and surface charging were problems, but they did not pose an immediate threat. For a long-term mission, these problems instead become incredibly detrimental. Because of this, research needs to be conducted to investigate these phenomena so that mitigation techniques can be developed and tested. To this end, this thesis serves to demonstrate the Gas and Plasma Dynamics …

Finite Time Suboptimal Control Design Of Nonlinear Systems With Θ-D Technique And Implementation To Aerospace Applications, Jie Yao

Doctoral Dissertations

“A finite time suboptimal control strategy (named θ - D approximated algorithm) was proposed in this study, which can provide the control engineers with a novel effective and efficient design tool from the finite time optimal perspective. Based on the framework of this proposed method, the original nonlinear dynamics were formulated in pseudo-linear form, and the performance index was denoted by a linear quadratic regulator prototype in this research. After that, the approximated solutions to intractable Hamilton-Jacobi-Bellman (HJB) equation were acquired by putting vanishing perturbation terms into the performance index. By tuning the parameters in perturbation terms, semi-global stability and …

Applications Of Information Theory In Filtering And Sensor Management, Matthew James Gualdoni

Doctoral Dissertations

“A classical sensor tasking methodology is analyzed in the context of generating sensor schedules for monitoring resident space objects (RSOs). This approach, namely maximizing the expected Kullback-Leibler divergence in a measurement update, is evaluated from a probabilistic perspective to determine the accuracy of the conventional approach. In this investigation, a newdivergence-based approach is proposed to circumvent themyopic nature of the measure, forecasting the potential information contribution to a time of interest and leveraging the system dynamics and measurement model to do so. The forecasted objective exploits properties of a batch measurement update to frequently exhibit faster optimization times when compared …

Magnetic Control Of Transport Of Particles And Droplets In Low Reynolds Number Shear Flows, Jie Zhang

Doctoral Dissertations

“Magnetic particles and droplets have been used in a wide range applications including biomedicine, biological analysis and chemical reaction. The manipulation of magnetic microparticles or microdroplets in microscale fluid environments is one of the most critical processes in the systems and platforms based on microfluidic technology. The conventional methods are based on magnetic forces to manipulate magnetic particles or droplets in a viscous fluid.

In contrast to conventional magnetic separation method, several recent experimental and theoretical studies have demonstrated a different way to manipulate magnetic non-spherical particles by using a uniform magnetic field in the microchannel. However, the fundamental mechanism …

Forming And Processing Of Advanced Fiber Reinforced Polymer Composites, Robert Meinders

Doctoral Dissertations

“Composite materials are commonly used in industry to manufacture strong and lightweight structures. Composites feature a large degree of flexibility in materials selection and manufacturing processes to tailor the strength of manufactured parts. This study examines different manufacturing aspects of composites. In Part I, the fabrication of composite parts using the compression forming process is examined. During compression forming, metal dies are used to apply large deformations to prepreg material to fabricate composite parts. The high stresses and deformations of this process can yield manufacturing defects. T650/5320-1 prepreg is subjected to material characterization to develop simulations of large deformation forming …

Impact Of Turbulence Models And Shape Parameterization On Robust Aerodynamic Shape Optimization, Aslihan Vuruskan

Doctoral Dissertations

"Aerodynamic design optimization is typically performed at fixed flight conditions, without considering the variation and uncertainty in operating conditions. The objective of robust aerodynamic optimization is to design an aerodynamic configuration, which will keep its optimum performance under varying conditions such as the speed of aircraft. The primary goal of this study was to investigate the impact of turbulence models used in RANS simulations on the 2-D airfoil and 3-D wing designs obtained with gradient-based deterministic and robust optimization in transonic, viscous, turbulent flows. The main contribution of this research to the aerodynamic design area was to quantify the impact …

Experimental Investigation Of Ionic Liquid Mixtures For Electrospray Propulsion, Mitchell J. Wainwright

Doctoral Dissertations

"In recent years, there has been a dramatic increase in the number of small satellites (namely MicroSats, NanoSats, and CubeSats) in earth orbit; many of these are launched without propulsion systems. Multi-mode propulsion systems, capable of operating in either chemical or electric mode, have been proposed as attractive candidates for use in small satellites. Such systems are mass and volume optimal and flexible in terms of thrust requirements. Most previous work on multi-mode systems has focused on chemical mode performance.The work in this dissertation focuses on the electric mode performance of these propulsion systems.

The work in this research is …